Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
# Commands ## create The --bundle [start-pr-bundle] and --pid-file options and ID argument [runc-start-id] match runC's interface. One benefit of the early-exit 'create' is that the exit code does not conflate container process exits with "failed to setup the sandbox" exits. We can take advantage of that and use non-zero 'create' exits to allow stderr writing (so the runtime can log errors while dying without having to successfully connect to syslog or some such). Trevor still likes the long-running 'create' API because it makes collecting the exit code easier, see the entry under rejected-for-now avenues at the end of this commit message. ### --pid-file You can get the PID by calling 'state' [container-pid-from-state], and container PIDs may not be portable [container-pid-not-portable]. But it's a common way for interfacing with init systems like systemd [systemd-pid], and for this first pass at the command line API folks are ok with some Linux-centrism [linux-centric]. ### Document LISTEN_FDS for passing open file descriptors This landed in runC with [runc-listen-fds], but the bundle-author <-> runtime specs explicitly avoided talking about how this is set (since the bundle-author didn't care about the runtime-caller <-> runtime interface) [runtime-spec-caller-api-agnostic]. This commit steps away from that agnosticism. Trevor left LISTEN_PID [sd_listen_fds,listen-fds-description] out, since he doesn't see how the runtime-caller would choose anything other than 1 for its value. It seems like something that a process would have to set for itself (because guessing the PID of a child before spawning it seems racy ;). In any event, the runC implementation seems to set this to 1 regardless of what systemd passes to it [listen-fds-description]. We've borrowed Shishir's wording for the example [listen-fds-description]. ## state [state-pr] Partially catch up with opencontainers/runtime-spec@7117ede7 (Expand on the definition of our ops, 2015-10-13, opencontainers#225, v0.4.0). The state example is adapted from runtime.md, but we defer the actual specification of the JSON to that file. The encoding for the output JSON (and all standard-stream activity) is covered by the "Character encodings" section. In cases where the runtime ignores the SHOULD (still technically compliant), RFC 7159 makes encoding detection reasonably straightforward [rfc7159-s8.1]. The obsolete RFC 4627 has some hints as well [rfc4627-s3] (although these were dropped in RFC 7518 [rfc7518-aA], probably as a result of removing the constraint that "JSON text" be an object or array [rfc7518-aA]). The hints should still apply to the state output, because we know it will be an object. If that ends up being too dicey and we want to certify runtimes that do not respect their operating-system conventions, we can add an --encoding option later. ## kill Partially catch up with opencontainers/runtime-spec@be594153 (Split create and start, 2016-04-01, opencontainers#384). The interface is based on POSIX [posix-kill], util-linux [util-linux-kill], and GNU coreutils [coreutils-kill]. The TERM/KILL requirement is a minimum portability requirement for soft/hard stops. Windows lacks POSIX signals [windows-signals], and currently supports soft stops in Docker with whatever is behind hcsshim.ShutdownComputeSystem [docker-hcsshim]. The docs we're landing here explicitly allow that sort of substitution, because we need to have soft/hard stop on those platforms but *can't* use POSIX signals. They borrow wording from opencontainers/runtime-spec@35b0e9ee (config: Clarify MUST for platform.os and .arch, 2016-05-19, opencontainers#441) to recommend runtime authors document the alternative technology so bundle-authors can prepare (e.g. by installing the equivalent to a SIGTERM signal handler). # Command style Use imperative phrasing for command summaries, to follow the practice recommended by Python's PEP 257 [pep257-docstring]: The docstring is a phrase ending in a period. It prescribes the function or method's effect as a command ("Do this", "Return that"), not as a description; e.g. don't write "Returns the pathname ...". The commands have the following layout: ### {command name} {one-line description} * *Options:* ... ... * *Exit code:* ... {additional notes} #### Example {example} The four-space list indents follow opencontainers/runtime-spec@7795661 (runtime.md: Fix sub-bullet indentation, 2016-06-08, opencontainers#495). From [markdown-syntax]: List items may consist of multiple paragraphs. Each subsequent paragraph in a list item must be indented by either 4 spaces or one tab... Trevor expects that's intended to be read with "block element" instead of "paragraph", in which case it applies to nested lists too. And while GitHub supports two-space indents [github-lists]: You can create nested lists by indenting lines by two spaces. it seems that pandoc does not. # Global options This section is intended to allow runtimes to extend the command line API with additional options and commands as they see fit without interfering with the commands and options specified in this document. With regard to the statement "Command names MUST NOT start with hyphens", the rationale behind this decision is to distinguish unrecognized commands from unrecognized options [distinguish-unrecognized-commands] because we want to allow (but not require) runtimes to fail fast when faced with an unrecognized command [optional-fail-fast]. # Long options Use GNU-style long options to avoid ambiguous, one-character options in the spec, while still allowing the runtime to support one-character options with packing. We don't specify one-character options in this spec, because portable callers can use the long form, and not specifying short forms leaves runtimes free to assign those as they see fit. # Character encodings Punt to the operating system for character encodings. Without this, the character set for the state JSON or other command output seemed too ambiguous. Trevor wishes there were cleaner references for the {language}.{encoding} locales like en_US.UTF-8 and UTF-8. But [wikipedia-utf-8,wikipedia-posix-locale] seems too glib, and he can't find a more targetted UTF-8 link than just dropping folks into a Unicode chapter (which is what [wikipedia-utf-8] does): The Unicode Standard, Version 6.0, §3.9 D92, §3.10 D95 (2011) With the current v8.0 (2015-06-17), it's still §3.9 D92 and §3.10 D95. The TR35 link is for: In addition, POSIX locales may also specify the character encoding, which requires the data to be transformed into that target encoding. and the POSIX §6.2 link is for: In other locales, the presence, meaning, and representation of any additional characters are locale-specific. # Standard streams The "MUST NOT attempt to read from its stdin" means a generic caller can safely exec the command with a closed or null stdin, and not have to worry about the command blocking or crashing because of that. The stdout spec for start/delete is more lenient, because runtimes are unlikely to change their behavior because they are unable to write to stdout. If this assumption proves troublesome, we may have to tighten it up later. # Event triggers The "Callers MAY block..." wording is going to be hard to enforce, but with the runC model, clients rely on the command exits to trigger post-create and post-start activity. The longer the runtime hangs around after completing its action, the laggier those triggers will be. For an alternative event trigger approach, see the discussion of an 'event' command in the rejected-for-now avenues at the end of this commit message. # Lifecycle notes These aren't documented in the current runtime-spec, and may no longer be true. But they were true at one point, and informed the development of this specification. ## Process cleanup On IRC on 2015-09-15 (with PDT timestamps): 10:56 < crosbymichael> if the main process dies in the container, all other process are killed ... 10:58 < julz> crosbymichael: I'm assuming what you mean is you kill everything in the cgroup -> everything in the container dies? 10:58 < crosbymichael> julz: yes, that is how its implemented ... 10:59 < crosbymichael> julz: we actually freeze first, send the KILL, then unfreeze so we don't have races ## Container IDs for namespace joiners You can create a config that adds no isolation vs. the runtime namespace or completely joins another set of existing namespaces. It seems odd to call that a new "container", but the ID is really more of a process ID, and less of a container ID. The "container" phrasing is just a useful hint that there might be some isolation going on. And we're always creating a new "container process" with 'create'. # Other changes This commit also drops the file-descriptor docs from runtime-linux. It's unclear how these apply to runtimes APIs that are not based on the command line / execve, and the functionality is covered by the more tightly scoped LISTEN_FDS wording in the command-line docs. # Avenues pursued but rejected (for now) * Early versions of this specification had 'start' taking '--config' and '--runtime', but this commit uses '--bundle' [start-pr-bundle]. The single config file change [single-config-proposal] went through, but Trevor would also like to be able to pipe a config into the 'funC start' command (e.g. via a /dev/fd/3 pseudo-filesystem path) [runc-config-via-stdin], and he has a working example that supports this without difficulty [ccon-config-via-stdin]. But since [runc-bundle-option] landed on 2015-11-16, runC has replaced their --config-file and --runtime-file flags with --bundle, and the current goal of this API is "keeping as much similarity with the existing runC command-line as possible", not "makes sense to Trevor" ;). It looks like runC was reacting [runc-required-config-file] to strict wording in the spec [runtime-spec-required-config-file], so we might be able to revisit this if/when we lift that restriction. * Having 'start' (now 'create') take a --state option to write state to a file [start-pr-state]. This is my preferred approach to sharing container state, since it punts a persistent state registry to higher-level tooling [punt-state-registry]. But runtime-spec currently requires the runtime to maintain such a registry [state-registry], and we don't need two ways to do that ;). On systems like Solaris, the kernel maintains a registry of container IDs directly, so they don't need an external registry [solaris-kernel-state]. * Having 'start' (now 'create') take an --id option instead of a required ID argument, and requiring the runtime to generate a unique ID if the option was not set. When there is a long-running host process waiting on the container process to perform cleanup, the runtime-caller may not need to know the container ID. However, runC has been requiring a user-specified ID since [runc-start-id], and this spec follows the early-exit 'create' from [runc-create-start], so we require one here. We can revisit this if we regain a long-running 'create' process. * Having a long-running 'create' process. Trevor is not a big fan of this early-exit 'create', which requires platform-specific magic to collect the container process's exit code. The ptrace idea in this commit is from Mrunal [mrunal-ptrace]. Trevor has a proposal for an 'event' operation [event] which would provide a convenient created trigger. With 'event' in place, we don't need the 'create' process exit to serve as that trigger, and could have a long-running 'create' that collects the container process exit code using the portable waitid() family. But the consensus after this week's meeting was to table that while we land docs for the runC API [mimic-runc]. * Having a 'version' command to make it easy for a caller to report which runtime they're using. But we don't have a use-case that makes it strictly necessary for interop, so we're leaving it out for now [no-version]. * Using 'sh' syntax highlighting [syntax-highlighting] for the fenced code blocks. The 'sh' keyword comes from [linguist-languages]. But the new fenced code blocks are shell sessions, not scripts, and we don't want shell-syntax highlighting in the command output. [ccon-config-via-stdin]: https://github.com/wking/ccon/tree/v0.4.0#configuration [container-pid-from-state]: https://github.com/opencontainers/runtime-spec/pull/511/files#r70353376 Subject: Add initial pass at a cmd line spec [container-pid-not-portable]: opencontainers#459 Subject: [ Runtime ] Allow for excluding pid from state [coreutils-kill]: http://www.gnu.org/software/coreutils/manual/html_node/kill-invocation.html [distinguish-unrecognized-commands]: https://github.com/wking/oci-command-line-api/pull/8/files#r46898167 Subject: Clarity for commands vs global options [docker-hcsshim]: https://github.com/docker/docker/pull/16997/files#diff-5d0b72cccc4809455d52aadc62329817R230 moby/moby@bc503ca8 (Windows: [TP4] docker kill handling, 2015-10-12, moby/moby#16997) [event]: opencontainers#508 Subject: runtime: Add an 'event' operation for subscribing to pushes [github-lists]: https://help.github.com/articles/basic-writing-and-formatting-syntax/#lists [linguist-languages]: https://github.com/github/linguist/blob/master/lib/linguist/languages.yml [linux-centric]: http://ircbot.wl.linuxfoundation.org/meetings/opencontainers/2016/opencontainers.2016-07-13-17.03.log.html#l-39 [listen-fds-description]: opencontainers/runc#231 (comment) Subject: Systemd integration with runc, for on-demand socket activation [markdown-syntax]: http://daringfireball.net/projects/markdown/syntax#list [mimic-runc]: http://ircbot.wl.linuxfoundation.org/meetings/opencontainers/2016/opencontainers.2016-07-13-17.03.log.html#l-15 [mrunal-ptrace]: http://ircbot.wl.linuxfoundation.org/eavesdrop/%23opencontainers/%23opencontainers.2016-07-13.log.html#t2016-07-13T18:58:54 [no-version]: http://ircbot.wl.linuxfoundation.org/meetings/opencontainers/2016/opencontainers.2016-07-20-21.03.log.html#l-75 [optional-fail-fast]: wking/oci-command-line-api@527f3c6#commitcomment-14835617 Subject: Use RFC 2119's keywords (MUST, MAY, ...) [pep257-docstring]: https://www.python.org/dev/peps/pep-0257/#one-line-docstrings [posix-kill]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/kill.html [punt-state-registry]: http://ircbot.wl.linuxfoundation.org/meetings/opencontainers/2015/opencontainers.2015-12-02-18.01.log.html#l-79 [rfc4627-s3]: https://tools.ietf.org/html/rfc4627#section-3 [rfc7158-aA]: https://tools.ietf.org/html/rfc7158#appendix-A RFC 7518 is currently identical to 7519. [rfc7159-s8.1]: https://tools.ietf.org/html/rfc7159#section-8.1 [runc-bundle-option]: opencontainers/runc#373 Subject: adding support for --bundle [runc-config-via-stdin]: opencontainers/runc#202 Subject: Can runc take its configuration on stdin? [runc-listen-fds]: opencontainers/runc#231 Subject: Systemd integration with runc, for on-demand socket activation [runc-required-config-file]: opencontainers/runc#310 (comment) Subject: specifying a spec file on cmd line? [runc-start-id]: opencontainers/runc#541 opencontainers/runc@a7278cad (Require container id as arg1, 2016-02-08, opencontainers/runc#541) [runtime-spec-caller-api-agnostic]: opencontainers#113 (comment) Subject: Add fd section for linux container process [runtime-spec-required-config-file]: https://github.com/opencontainers/runtime-spec/pull/210/files#diff-8b310563f1c6f616aa98e6aeffc4d394R14 106ec2d (Cleanup bundle.md, 2015-10-02, opencontainers#210) [sd_listen_fds]: http://www.freedesktop.org/software/systemd/man/sd_listen_fds.html [single-config-proposal]: https://groups.google.com/a/opencontainers.org/forum/#!topic/dev/0QbyJDM9fWY Subject: Single, unified config file (i.e. rolling back specs#88) Date: Wed, 4 Nov 2015 09:53:20 -0800 Message-ID: <[email protected]> [solaris-kernel-state]: wking/oci-command-line-api#3 (comment) Subject: Drop exec, pause, resume, and signal [start-pr-bundle]: wking/oci-command-line-api#11 Subject: start: Change --config and --runtime to --bundle [start-pr-state]: wking/oci-command-line-api#14 Subject: start: Add a --state option [state-pr]: wking/oci-command-line-api#16 Subject: runtime: Add a 'state' command [state-registry]: https://github.com/opencontainers/runtime-spec/pull/225/files#diff-b84a8d65d8ed53f4794cd2db7e8ea731R61 7117ede (Expand on the definition of our ops, 2015-10-13, opencontainers#225) [syntax-highlighting]: https://help.github.com/articles/github-flavored-markdown/#syntax-highlighting [systemd-pid]: http://ircbot.wl.linuxfoundation.org/meetings/opencontainers/2016/opencontainers.2016-07-20-21.03.log.html#l-69 [util-linux-kill]: http://man7.org/linux/man-pages/man1/kill.1.html [wikipedia-utf-8]: https://en.wikipedia.org/wiki/UTF-8 [wikipedia-posix-locale]: https://en.wikipedia.org/wiki/Locale#POSIX_platforms [windows-singals]: https://groups.google.com/a/opencontainers.org/forum/#!topic/dev/PlGKu7QUwLE Subject: Fwd: Windows support for OCI stop/signal/kill (runtime-spec#356) Date: Thu, 26 May 2016 11:03:29 -0700 Message-ID: <[email protected]> Signed-off-by: Julian Friedman <[email protected]> Hopefully-Signed-off-by: Mike Brown <[email protected]> Signed-off-by: W. Trevor King <[email protected]> Reviewed-by: Jesse Butler <[email protected]>
- Loading branch information
