Pin header part number incorrect?

[lmurdock12]

The BOM here points out that the 16 pin header on the bottom side is LCSC part C30734.

This part does not match the part I am seeing in the trinity pictures with the two spacer pins on each and and the notch

What should be the correct part number?

I see 2×8Double female header - See Note on the BOM sheet, is this pointed out where the "note" is?

thanks!

[witnessmenow]

Hey, Well spotted actually, not something I thought about. A double female pin header like your photo will work, but as you say, it's not the same. The company that assemble the Trinity for me (makerfabs) were able to source a different part that is keyed (meaning it has that little nub) and also wider. The downside of the regular header is it is possible to put the Trinity in backwards (easy enough to diagnose as the printed arrows won't match up) and it's also possible to plug it in not centered (harder to diagnose). Neither should result in damage to the board or Trinity The only place I found it before was AliExpress in quantities of 100, which doesn't really make sense for a BOM, but here it is: US $25.71 | 100pcs 2.54mm 0.1" Pitch 2x8 Pin 16 Pin Female Pin Header Strip Polarizing Key https://a.aliexpress.com/_msmBFjM Hope this helps

…

On Sat 25 Feb 2023, 22:52 lmurdock12, ***@***.***> wrote: The BOM here <https://github.com/witnessmenow/ESP32-Trinity/blob/master/hardware/ESP32Trinity/V1.2/Trinity%20Bom%20V1.2%20-%20BOM_ESP32_TRINITY_V1_2_2021-07-05.csv> points out that the 16 pin header on the bottom side is LCSC part C30734 <https://www.lcsc.com/product-detail/Female-Headers_BOOMELE-Boom-Precision-Elec-C30734_C30734.html> . [image: image] <https://user-images.githubusercontent.com/44686596/221383157-3799bd5c-5ea6-4818-afeb-5d6630e3564c.png> This part does not match the part I am seeing in the trinity pictures with the two spacer pins on each and and the notch [image: image] <https://user-images.githubusercontent.com/44686596/221383114-51fdca3b-6710-46ef-aba9-02d38c3aa624.png> What should be the correct part number? I see 2×8Double female header - See Note on the BOM sheet, is this pointed out where the "note" is? thanks! — Reply to this email directly, view it on GitHub <#20>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAL5PQWHXZICB7W4ESB47U3WZKEKXANCNFSM6AAAAAAVIDJFNM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>