How to develop software for CC3200 LaunchPad on Ubuntu

Jump to bottom Edit New page

Carlo Vallati edited this page Jun 19, 2015 · 1 revision

Install openocd

Install libftdi sudo apt-get install libftdi-dev
Download the source package openocd
Install it
- ./configure --enable-ft2232_libftdi
- make
- sudo make install
Add new file 99-ti-launchpad.rules in /etc/udev/rules.d/

# CC3200 LaunchPad SUBSYSTEM=="usb", ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0660", GROUP="dialout", RUN+="/sbin/modprobe ftdi-sio" RUN+="/bin/sh -c '/bin/echo 0451 c32a > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
Restart udev
- sudo service udev restart

Download and install gcc-arm-embedded following gcc arm

Download and install using wine CC3200 SDK

Load an example program

cd ~/.wine/drive_c/TI/CC3200SDK_1.1.0/cc3200-sdk/example/getting_started_with_wlan_station/gcc/
make
cd ../../../tools/gcc_scripts/
sudo openocd -f cc3200.cfg
exit using ctrl + c
cp ~/drive_c/TI/CC3200SDK_1.1.0/cc3200-sdk/example/getting_started_with_wlan_station/gcc/exe/wlan_station.axf .
Start serial terminal: sudo minicom -D /dev/ttyUSB1
Start the application: arm-none-eabi-gdb -x gdbinit wlan_station.axf