Cmake based build system

CMakeLists.txt

@@ -0,0 +1,279 @@
+cmake_minimum_required(VERSION 3.21)
+
+project(vllm_extensions LANGUAGES CXX)
+
+message(STATUS "Build type: ${CMAKE_BUILD_TYPE}")
+
+include(${CMAKE_CURRENT_LIST_DIR}/cmake/utils.cmake)
+
+#
+# Supported python versions.  These versions will be searched in order, the
+# first match will be selected.  These should be kept in sync with setup.py.
+#
+set(PYTHON_SUPPORTED_VERSIONS "3.8" "3.9" "3.10" "3.11")
+
+# Supported NVIDIA architectures.
+set(CUDA_SUPPORTED_ARCHS "7.0;7.5;8.0;8.6;8.9;9.0")
+
+# Supported AMD GPU architectures.
+set(HIP_SUPPORTED_ARCHS "gfx908;gfx90a;gfx942;gfx1100")
+
+#
+# Supported/expected torch versions for CUDA/ROCm.
+#
+# Currently, having an incorrect pytorch version results in a warning
+# rather than an error.
+#
+# Note: the CUDA torch version is derived from pyproject.toml and various
+# requirements.txt files and should be kept consistent.  The ROCm torch
+# versions are derived from Dockerfile.rocm
+#
+set(TORCH_SUPPORTED_VERSION_CUDA "2.1.2")
+set(TORCH_SUPPORTED_VERSION_ROCM_5X "2.0.1")
+set(TORCH_SUPPORTED_VERSION_ROCM_6X "2.1.1")
+
+#
+# Try to find python package with an executable that exactly matches
+# `VLLM_PYTHON_EXECUTABLE` and is one of the supported versions.
+#
+if (VLLM_PYTHON_EXECUTABLE)
+  find_python_from_executable(${VLLM_PYTHON_EXECUTABLE} "${PYTHON_SUPPORTED_VERSIONS}")
+else()
+  message(FATAL_ERROR
+    "Please set VLLM_PYTHON_EXECUTABLE to the path of the desired python version"
+    " before running cmake configure.")
+endif()
+
+#
+# Update cmake's `CMAKE_PREFIX_PATH` with torch location.
+#
+append_cmake_prefix_path("torch" "torch.utils.cmake_prefix_path")
+
+#
+# Import torch cmake configuration.
+# Torch also imports CUDA (and partially HIP) languages with some customizations,
+# so there is no need to do this explicitly with check_language/enable_language,
+# etc.
+#
+find_package(Torch REQUIRED)
+
+#
+# Normally `torch.utils.cpp_extension.CUDAExtension` would add
+# `libtorch_python.so` for linking against an extension. Torch's cmake
+# configuration does not include this library (presumably since the cmake
+# config is used for standalone C++ binaries that link against torch).
+# The `libtorch_python.so` library defines some of the glue code between
+# torch/python via pybind and is required by VLLM extensions for this
+# reason. So, add it by manually using `append_torchlib_if_found` from
+# torch's cmake setup.
+#
+append_torchlib_if_found(torch_python)
+
+#
+# Set up GPU language and check the torch version and warn if it isn't
+# what is expected.
+#
+if (NOT HIP_FOUND AND CUDA_FOUND)
+  set(VLLM_GPU_LANG "CUDA")
+
+  if (NOT Torch_VERSION VERSION_EQUAL ${TORCH_SUPPORTED_VERSION_CUDA})
+    message(WARNING "Pytorch version ${TORCH_SUPPORTED_VERSION_CUDA} "
+      "expected for CUDA build, saw ${Torch_VERSION} instead.")
+  endif()
+elseif(HIP_FOUND)
+  set(VLLM_GPU_LANG "HIP")
+
+  # Importing torch recognizes and sets up some HIP/ROCm configuration but does
+  # not let cmake recognize .hip files. In order to get cmake to understand the
+  # .hip extension automatically, HIP must be enabled explicitly.
+  enable_language(HIP)
+
+  # ROCm 5.x
+  if (ROCM_VERSION_DEV_MAJOR EQUAL 5 AND
+      NOT Torch_VERSION VERSION_EQUAL ${TORCH_SUPPORTED_VERSION_ROCM_5X})
+    message(WARNING "Pytorch version ${TORCH_SUPPORTED_VERSION_ROCM_5X} "
+      "expected for ROCMm 5.x build, saw ${Torch_VERSION} instead.")
+  endif()
+
+  # ROCm 6.x
+  if (ROCM_VERSION_DEV_MAJOR EQUAL 6 AND
+      NOT Torch_VERSION VERSION_EQUAL ${TORCH_SUPPORTED_VERSION_ROCM_6X})
+    message(WARNING "Pytorch version ${TORCH_SUPPORTED_VERSION_ROCM_6X} "
+      "expected for ROCMm 6.x build, saw ${Torch_VERSION} instead.")
+  endif()
+else()
+  message(FATAL_ERROR "Can't find CUDA or HIP installation.")
+endif()
+
+#
+# Override the GPU architectures detected by cmake/torch and filter them by
+# the supported versions for the current language.
+# The final set of arches is stored in `VLLM_GPU_ARCHES`.
+#
+override_gpu_arches(VLLM_GPU_ARCHES
+  ${VLLM_GPU_LANG}
+  "${${VLLM_GPU_LANG}_SUPPORTED_ARCHS}")
+
+#
+# Query torch for additional GPU compilation flags for the given
+# `VLLM_GPU_LANG`.
+# The final set of arches is stored in `VLLM_GPU_FLAGS`.
+#
+get_torch_gpu_compiler_flags(VLLM_GPU_FLAGS ${VLLM_GPU_LANG})
+
+#
+# Set nvcc parallelism.
+#
+if(NVCC_THREADS AND VLLM_GPU_LANG STREQUAL "CUDA")
+  list(APPEND VLLM_GPU_FLAGS "--threads=${NVCC_THREADS}")
+endif()
+
+#
+# Define extension targets
+#
+
+#
+# _C extension
+#
+
+set(VLLM_EXT_SRC
+  "csrc/cache_kernels.cu"
+  "csrc/attention/attention_kernels.cu"
+  "csrc/pos_encoding_kernels.cu"
+  "csrc/activation_kernels.cu"
+  "csrc/layernorm_kernels.cu"
+  "csrc/quantization/squeezellm/quant_cuda_kernel.cu"
+  "csrc/quantization/gptq/q_gemm.cu"
+  "csrc/cuda_utils_kernels.cu"
+  "csrc/moe_align_block_size_kernels.cu"
+  "csrc/pybind.cpp")
+
+if(VLLM_GPU_LANG STREQUAL "CUDA")
+  list(APPEND VLLM_EXT_SRC
+    "csrc/quantization/awq/gemm_kernels.cu"
+    "csrc/quantization/marlin/marlin_cuda_kernel.cu"
+    "csrc/custom_all_reduce.cu")
+endif()
+
+define_gpu_extension_target(
+  _C
+  DESTINATION vllm
+  LANGUAGE ${VLLM_GPU_LANG}
+  SOURCES ${VLLM_EXT_SRC}
+  COMPILE_FLAGS ${VLLM_GPU_FLAGS}
+  ARCHITECTURES ${VLLM_GPU_ARCHES}
+  WITH_SOABI)
+
+#
+# _moe_C extension
+#
+
+set(VLLM_MOE_EXT_SRC
+  "csrc/moe/moe_ops.cpp"
+  "csrc/moe/topk_softmax_kernels.cu")
+
+define_gpu_extension_target(
+  _moe_C
+  DESTINATION vllm
+  LANGUAGE ${VLLM_GPU_LANG}
+  SOURCES ${VLLM_MOE_EXT_SRC}
+  COMPILE_FLAGS ${VLLM_GPU_FLAGS}
+  ARCHITECTURES ${VLLM_GPU_ARCHES}
+  WITH_SOABI)
+
+#
+# _punica_C extension
+#
+
+set(VLLM_PUNICA_EXT_SRC
+  "csrc/punica/bgmv/bgmv_bf16_bf16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_bf16_bf16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_bf16_fp16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_bf16_fp16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_bf16_fp32_bf16.cu"
+  "csrc/punica/bgmv/bgmv_bf16_fp32_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_bf16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_bf16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_fp16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_fp16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_fp32_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp16_fp32_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_bf16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_bf16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_fp16_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_fp16_fp16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_fp32_bf16.cu"
+  "csrc/punica/bgmv/bgmv_fp32_fp32_fp16.cu"
+  "csrc/punica/punica_ops.cc")
+
+#
+# Copy GPU compilation flags+update for punica
+#
+set(VLLM_PUNICA_GPU_FLAGS ${VLLM_GPU_FLAGS})
+list(REMOVE_ITEM VLLM_PUNICA_GPU_FLAGS
+  "-D__CUDA_NO_HALF_OPERATORS__"
+  "-D__CUDA_NO_HALF_CONVERSIONS__"
+  "-D__CUDA_NO_BFLOAT16_CONVERSIONS__"
+  "-D__CUDA_NO_HALF2_OPERATORS__")
+
+#
+# Filter out CUDA architectures < 8.0 for punica.
+#
+if (${VLLM_GPU_LANG} STREQUAL "CUDA")
+  set(VLLM_PUNICA_GPU_ARCHES)
+  foreach(ARCH ${VLLM_GPU_ARCHES})
+    string_to_ver(CODE_VER ${ARCH})
+    if (CODE_VER GREATER_EQUAL 8.0)
+      list(APPEND VLLM_PUNICA_GPU_ARCHES ${ARCH})
+    endif()
+  endforeach()
+  message(STATUS "Punica target arches: ${VLLM_PUNICA_GPU_ARCHES}")
+endif()
+
+if (VLLM_PUNICA_GPU_ARCHES)
+  define_gpu_extension_target(
+    _punica_C
+    DESTINATION vllm
+    LANGUAGE ${VLLM_GPU_LANG}
+    SOURCES ${VLLM_PUNICA_EXT_SRC}
+    COMPILE_FLAGS ${VLLM_PUNICA_GPU_FLAGS}
+    ARCHITECTURES ${VLLM_PUNICA_GPU_ARCHES}
+    WITH_SOABI)
+else()
+  message(WARNING "Unable to create _punica_C target because none of the "
+    "requested architectures (${VLLM_GPU_ARCHES}) are supported, i.e. >= 8.0")
+endif()
+
+#
+# Add the `default` target which detects which extensions should be
+# built based on platform/architecture.  This is the same logic that
+# setup.py uses to select which extensions should be built and should
+# be kept in sync.
+#
+# The `default` target makes direct use of cmake easier since knowledge
+# of which extensions are supported has been factored in, e.g.
+#
+# mkdir build && cd build
+# cmake -G Ninja -DVLLM_PYTHON_EXECUTABLE=`which python3` -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=../vllm ..
+# cmake --build . --target default
+#
+add_custom_target(default)
+
+if(VLLM_GPU_LANG STREQUAL "CUDA" OR VLLM_GPU_LANG STREQUAL "HIP")
+  message(STATUS "Enabling C extension.")
+  add_dependencies(default _C)
+endif()
+
+if(VLLM_GPU_LANG STREQUAL "CUDA")
+  message(STATUS "Enabling moe extension.")
+  add_dependencies(default _moe_C)
+
+  # Enable punica if -DVLLM_INSTALL_PUNICA_KERNELS=ON or
+  # VLLM_INSTALL_PUNICA_KERNELS is set in the environment and
+  # there are supported target arches.
+  if (VLLM_PUNICA_GPU_ARCHES AND
+      (ENV{VLLM_INSTALL_PUNICA_KERNELS} OR VLLM_INSTALL_PUNICA_KERNELS))
+    message(STATUS "Enabling punica extension.")
+    add_dependencies(default _punica_C)
+  endif()
+endif()

Dockerfile

@@ -38,6 +38,8 @@ RUN --mount=type=cache,target=/root/.cache/pip \
 # copy input files
 COPY csrc csrc
 COPY setup.py setup.py
+COPY cmake cmake
+COPY CMakeLists.txt CMakeLists.txt
 COPY requirements.txt requirements.txt
 COPY pyproject.toml pyproject.toml
 COPY vllm/__init__.py vllm/__init__.py

MANIFEST.in

@@ -1,4 +1,6 @@
 include LICENSE
 include requirements.txt
+include CMakeLists.txt
 
+recursive-include cmake *
 recursive-include csrc *

cmake/hipify.py

@@ -0,0 +1,73 @@
+#!/usr/bin/env python3
+
+#
+# A command line tool for running pytorch's hipify preprocessor on CUDA
+# source files.
+#
+# See https://github.com/ROCm/hipify_torch
+# and <torch install dir>/utils/hipify/hipify_python.py
+#
+
+import argparse
+import shutil
+import os
+
+from torch.utils.hipify.hipify_python import hipify
+
+if __name__ == '__main__':
+    parser = argparse.ArgumentParser()
+
+    # Project directory where all the source + include files live.
+    parser.add_argument(
+        "-p",
+        "--project_dir",
+        help="The project directory.",
+    )
+
+    # Directory where hipified files are written.
+    parser.add_argument(
+        "-o",
+        "--output_dir",
+        help="The output directory.",
+    )
+
+    # Source files to convert.
+    parser.add_argument("sources",
+                        help="Source files to hipify.",
+                        nargs="*",
+                        default=[])
+
+    args = parser.parse_args()
+
+    # Limit include scope to project_dir only
+    includes = [os.path.join(args.project_dir, '*')]
+
+    # Get absolute path for all source files.
+    extra_files = [os.path.abspath(s) for s in args.sources]
+
+    # Copy sources from project directory to output directory.
+    # The directory might already exist to hold object files so we ignore that.
+    shutil.copytree(args.project_dir, args.output_dir, dirs_exist_ok=True)
+
+    hipify_result = hipify(project_directory=args.project_dir,
+                           output_directory=args.output_dir,
+                           header_include_dirs=[],
+                           includes=includes,
+                           extra_files=extra_files,
+                           show_detailed=True,
+                           is_pytorch_extension=True,
+                           hipify_extra_files_only=True)
+
+    hipified_sources = []
+    for source in args.sources:
+        s_abs = os.path.abspath(source)
+        hipified_s_abs = (hipify_result[s_abs].hipified_path if
+                          (s_abs in hipify_result
+                           and hipify_result[s_abs].hipified_path is not None)
+                          else s_abs)
+        hipified_sources.append(hipified_s_abs)
+
+    assert (len(hipified_sources) == len(args.sources))
+
+    # Print hipified source files.
+    print("\n".join(hipified_sources))