[release-21.0] Use proper zstd decoder pool for binlog event compression handling (#17042)

go/mysql/binlog_event_compression.go

@@ -25,7 +25,6 @@ import (
 	"github.com/klauspost/compress/zstd"
 
 	"vitess.io/vitess/go/stats"
-	"vitess.io/vitess/go/vt/log"
 	"vitess.io/vitess/go/vt/vterrors"
 
 	vtrpcpb "vitess.io/vitess/go/vt/proto/vtrpc"
@@ -89,26 +88,9 @@ var (
 	// allocations and GC overhead so this pool allows us to handle
 	// concurrent cases better while still scaling to 0 when there's no
 	// usage.
-	statefulDecoderPool sync.Pool
+	statefulDecoderPool = &decoderPool{}
 )
 
-func init() {
-	var err error
-	statelessDecoder, err = zstd.NewReader(nil, zstd.WithDecoderConcurrency(0))
-	if err != nil { // Should only happen e.g. due to ENOMEM
-		log.Errorf("Error creating stateless decoder: %v", err)
-	}
-	statefulDecoderPool = sync.Pool{
-		New: func() any {
-			d, err := zstd.NewReader(nil, zstd.WithDecoderMaxMemory(zstdInMemoryDecompressorMaxSize))
-			if err != nil { // Should only happen e.g. due to ENOMEM
-				log.Errorf("Error creating stateful decoder: %v", err)
-			}
-			return d
-		},
-	}
-}
-
 type TransactionPayload struct {
 	size             uint64
 	compressionType  uint64
@@ -304,21 +286,22 @@ func (tp *TransactionPayload) decompress() error {
 	// larger payloads.
 	if tp.uncompressedSize > zstdInMemoryDecompressorMaxSize {
 		in := bytes.NewReader(tp.payload)
-		streamDecoder := statefulDecoderPool.Get().(*zstd.Decoder)
-		if streamDecoder == nil {
-			return vterrors.New(vtrpcpb.Code_INTERNAL, "failed to create stateful stream decoder")
-		}
-		if err := streamDecoder.Reset(in); err != nil {
-			return vterrors.Wrap(err, "error resetting stateful stream decoder")
+		streamDecoder, err := statefulDecoderPool.Get(in)
+		if err != nil {
+			return err
 		}
 		compressedTrxPayloadsUsingStream.Add(1)
 		tp.reader = streamDecoder
 		return nil
 	}
 
 	// Process smaller payloads using only in-memory buffers.
-	if statelessDecoder == nil { // Should never happen
-		return vterrors.New(vtrpcpb.Code_INTERNAL, "failed to create stateless decoder")
+	if statelessDecoder == nil { // Should only need to be done once
+		var err error
+		statelessDecoder, err = zstd.NewReader(nil, zstd.WithDecoderConcurrency(0))
+		if err != nil { // Should only happen e.g. due to ENOMEM
+			return vterrors.Wrap(err, "failed to create stateless decoder")
+		}
 	}
 	decompressedBytes := make([]byte, 0, tp.uncompressedSize) // Perform a single pre-allocation
 	decompressedBytes, err := statelessDecoder.DecodeAll(tp.payload, decompressedBytes[:0])
@@ -340,11 +323,8 @@ func (tp *TransactionPayload) decompress() error {
 func (tp *TransactionPayload) Close() {
 	switch reader := tp.reader.(type) {
 	case *zstd.Decoder:
-		if err := reader.Reset(nil); err == nil || err == io.EOF {
-			readersPool.Put(reader)
-		}
+		statefulDecoderPool.Put(reader)
 	default:
-		reader = nil
 	}
 	tp.iterator = nil
 }
@@ -368,3 +348,38 @@ func (tp *TransactionPayload) GetNextEvent() (BinlogEvent, error) {
 //func (tp *TransactionPayload) Events() iter.Seq[BinlogEvent] {
 //	return tp.iterator
 //}
+
+// decoderPool manages a sync.Pool of *zstd.Decoders.
+type decoderPool struct {
+	pool sync.Pool
+}
+
+// Get gets a pooled OR new *zstd.Decoder.
+func (dp *decoderPool) Get(reader io.Reader) (*zstd.Decoder, error) {
+	var (
+		decoder *zstd.Decoder
+		ok      bool
+	)
+	if pooled := dp.pool.Get(); pooled != nil {
+		decoder, ok = pooled.(*zstd.Decoder)
+		if !ok {
+			return nil, vterrors.Errorf(vtrpcpb.Code_INTERNAL, "[BUG] expected *zstd.Decoder but got %T", pooled)
+		}
+	} else {
+		d, err := zstd.NewReader(nil, zstd.WithDecoderMaxMemory(zstdInMemoryDecompressorMaxSize))
+		if err != nil { // Should only happen e.g. due to ENOMEM
+			return nil, vterrors.Wrap(err, "failed to create stateful stream decoder")
+		}
+		decoder = d
+	}
+	if err := decoder.Reset(reader); err != nil {
+		return nil, vterrors.Wrap(err, "error resetting stateful stream decoder")
+	}
+	return decoder, nil
+}
+
+func (dp *decoderPool) Put(decoder *zstd.Decoder) {
+	if err := decoder.Reset(nil); err == nil || err == io.EOF {
+		dp.pool.Put(decoder)
+	}
+}

go/mysql/binlog_event_compression_test.go

@@ -0,0 +1,75 @@
+/*
+Copyright 2024 The Vitess Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package mysql
+
+import (
+	"bytes"
+	"io"
+	"testing"
+
+	"github.com/klauspost/compress/zstd"
+	"github.com/stretchr/testify/require"
+)
+
+func TestDecoderPool(t *testing.T) {
+	validateDecoder := func(t *testing.T, err error, decoder *zstd.Decoder) {
+		require.NoError(t, err)
+		require.NotNil(t, decoder)
+		require.IsType(t, &zstd.Decoder{}, decoder)
+	}
+	tests := []struct {
+		name    string
+		reader  io.Reader
+		wantErr bool
+	}{
+		{
+			name:   "happy path",
+			reader: bytes.NewReader([]byte{0x68, 0x61, 0x70, 0x70, 0x79}),
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			// It's not guaranteed that we get the same decoder back from the pool
+			// that we just put in, so we use a loop and ensure that it worked at
+			// least one of the times. Without doing this the test would be flaky.
+			poolingUsed := false
+
+			for i := 0; i < 20; i++ {
+				decoder, err := statefulDecoderPool.Get(tt.reader)
+				validateDecoder(t, err, decoder)
+				statefulDecoderPool.Put(decoder)
+
+				decoder2, err := statefulDecoderPool.Get(tt.reader)
+				validateDecoder(t, err, decoder2)
+				if decoder2 == decoder {
+					poolingUsed = true
+				}
+				statefulDecoderPool.Put(decoder2)
+
+				decoder3, err := statefulDecoderPool.Get(tt.reader)
+				validateDecoder(t, err, decoder3)
+				if decoder3 == decoder || decoder3 == decoder2 {
+					poolingUsed = true
+				}
+				statefulDecoderPool.Put(decoder3)
+			}
+
+			require.True(t, poolingUsed)
+		})
+	}
+}