ADIMLab Granty pins/config (MarlinFirmware#14919)

Marlin/Makefile

@@ -251,6 +251,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
 # Overlord/Overlord Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+# ADIMLab Granty
+else ifeq ($(HARDWARE_MOTHERBOARD),1144)
 
 #
 # RAMBo and derivatives

Marlin/src/core/boards.h

@@ -95,6 +95,7 @@
 #define BOARD_Z_BOLT_X_SERIES         1141  // Z-Bolt X Series
 #define BOARD_TT_OSCAR                1142  // TT OSCAR
 #define BOARD_OVERLORD                1143  // Overlord/Overlord Pro
+#define BOARD_HJC2560C_REV2           1144  // ADIMLab Granty
 
 //
 // RAMBo and derivatives

Marlin/src/pins/mega/pins_HJC2560C_REV2.h

@@ -0,0 +1,170 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * HJC2560-C Rev2.x pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define DEFAULT_MACHINE_NAME "HCMaker7"
+#define BOARD_INFO_NAME      "HJC2560-C"
+
+//
+// Servos
+//
+//#ifndef SERVO0_PIN
+//  #define SERVO0_PIN       11
+//#endif
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         22
+#define Y_STOP_PIN         26
+#define Z_STOP_PIN         29
+//#define EXP_STOP_PIN       28
+
+//
+// Steppers
+//
+#define X_STEP_PIN         25
+#define X_DIR_PIN          23
+#define X_ENABLE_PIN       27
+
+#define Y_STEP_PIN         32
+#define Y_DIR_PIN          33
+#define Y_ENABLE_PIN       31
+
+#define Z_STEP_PIN         35
+#define Z_DIR_PIN          36
+#define Z_ENABLE_PIN       34
+
+#define E0_STEP_PIN        42
+#define E0_DIR_PIN         43
+#define E0_ENABLE_PIN      37
+
+#define E1_STEP_PIN        49
+#define E1_DIR_PIN         47
+#define E1_ENABLE_PIN      48
+
+#define MOTOR_CURRENT_PWM_XY_PIN   44
+#define MOTOR_CURRENT_PWM_Z_PIN    45
+#define MOTOR_CURRENT_PWM_E_PIN    46
+// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
+#ifndef MOTOR_CURRENT_PWM_RANGE
+  #define MOTOR_CURRENT_PWM_RANGE  2000
+#endif
+#define DEFAULT_PWM_MOTOR_CURRENT  { 1300, 1300, 1250 }
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          8   // Analog Input
+#define TEMP_1_PIN          9   // Analog Input
+#define TEMP_BED_PIN       10   // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN        2
+#define HEATER_1_PIN        3
+#define HEATER_BED_PIN      4
+
+#ifndef FAN_PIN
+  #define FAN_PIN           7   //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS               53
+#define SD_DETECT_PIN      39
+//#define LED_PIN           8
+#define CASE_LIGHT_PIN      8           // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
+
+//#define SAFETY_TRIGGERED_PIN     28   // PIN to detect the safety circuit has triggered
+//#define MAIN_VOLTAGE_MEASURE_PIN 14   // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if ENABLED(SPINDLE_LASER_ENABLE)
+  #define SPINDLE_DIR_PIN           16
+  #define SPINDLE_LASER_ENABLE_PIN  17   // Pin should have a pullup!
+  #define SPINDLE_LASER_PWM_PIN      9   // Hardware PWM
+#endif
+
+//
+// LCD / Controller
+//
+#if HAS_SPI_LCD
+
+  #define BEEPER_PIN       18
+
+  #if ENABLED(NEWPANEL)
+
+    #define LCD_PINS_RS     20   // LCD_CS
+    #define LCD_PINS_ENABLE 15   // LCD_SDA
+    #define LCD_PINS_D4     14   // LCD_SCK
+
+    #if ENABLED(HJC_LCD_SMART_CONTROLLER)
+      #define LCD_BACKLIGHT_PIN  5   // LCD_Backlight
+      //#ifndef LCD_CONTRAST_PIN
+      //  #define LCD_CONTRAST_PIN  5   // LCD_Contrast
+      //#endif
+      #ifndef FIL_RUNOUT_PIN
+        #define FIL_RUNOUT_PIN 24   // Filament runout
+      #endif
+    #else
+      #define LCD_PINS_D5  21
+      #define LCD_PINS_D6   5
+      #define LCD_PINS_D7   6
+    #endif
+
+    #define BTN_EN1        41
+    #define BTN_EN2        40
+    #define BTN_ENC        19
+
+    #define SD_DETECT_PIN  39
+
+  #else
+
+    // Buttons attached to a shift register
+    #define SHIFT_CLK      38
+    #define SHIFT_LD       42
+    #define SHIFT_OUT      40
+    #define SHIFT_EN       17
+
+    #define LCD_PINS_RS    16
+    #define LCD_PINS_ENABLE 5
+    #define LCD_PINS_D4     6
+    #define LCD_PINS_D5    21
+    #define LCD_PINS_D6    20
+    #define LCD_PINS_D7    19
+
+  #endif // !NEWPANEL
+
+#endif // HAS_SPI_LCD

Marlin/src/pins/pins.h

@@ -238,6 +238,8 @@
   #include "mega/pins_WANHAO_ONEPLUS.h"         // ATmega2560                             env:megaatmega2560
 #elif MB(OVERLORD)
   #include "mega/pins_OVERLORD.h"               // ATmega2560                             env:megaatmega2560
+#elif MB(HJC2560C_REV2)
+  #include "mega/pins_HJC2560C_REV2.h"          // ATmega2560                             env:megaatmega2560
 
 //
 // ATmega1281, ATmega2561