[pull] master from torvalds:master #56
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
Macros arguments should be enclosed by parenthesis for safety. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Driver uses 'unsigned int' in other places instead of 'unsigned'. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Remove some unneeded blank lines, align indentation with open parenthesis (or fix existing alignment). Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fix arbitary -> arbitrary. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Use proper kerneldoc to fix GCC warnings like: drivers/memory/of_memory.c:30: warning: Function parameter or member 'dev' not described in 'of_get_min_tck' Signed-off-by: Krzysztof Kozlowski <[email protected]>
Macros arguments should be enclosed by parenthesis for safety. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Align indentation with open parenthesis (or fix existing alignment). Signed-off-by: Krzysztof Kozlowski <[email protected]>
Remove unneeded blank line and align indentation with open parenthesis. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fix firwmare -> firmware. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Florian Fainelli <[email protected]>
Add dedicated Krzysztof Kozlowski's Git repository on @kernel.org for memory controller drivers. Signed-off-by: Krzysztof Kozlowski <[email protected]>
Pre-allocate the page-table pages for the vmalloc area at the level which needs synchronization on x86-64, which is P4D for 5-level and PUD for 4-level paging. Doing this at boot makes sure no synchronization of that area is necessary at runtime. The synchronization takes the pgd_lock and iterates over all page-tables in the system, so it can take quite long and is better avoided. Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Remove the code to sync the vmalloc and ioremap ranges for x86-64. The page-table pages are all pre-allocated now so that synchronization is no longer necessary. Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/[email protected]
The function is only called from within init_64.c and can be static. Also remove it from pgtable_64.h. Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Mike Rapoport <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
The Intel architecture defines a set of Serializing Instructions (a detailed definition can be found in Vol.3 Section 8.3 of the Intel "main" manual, SDM). However, these instructions do more than what is required, have side effects and/or may be rather invasive. Furthermore, some of these instructions are only available in kernel mode or may cause VMExits. Thus, software using these instructions only to serialize execution (as defined in the manual) must handle the undesired side effects. As indicated in the name, SERIALIZE is a new Intel architecture Serializing Instruction. Crucially, it does not have any of the mentioned side effects. Also, it does not cause VMExit and can be used in user mode. This new instruction is currently documented in the latest "extensions" manual (ISE). It will appear in the "main" manual in the future. Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Tony Luck <[email protected]> Acked-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Having sync_core() in processor.h is problematic since it is not possible to check for hardware capabilities via the *cpu_has() family of macros. The latter needs the definitions in processor.h. It also looks more intuitive to relocate the function to sync_core.h. This changeset does not make changes in functionality. Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Tony Luck <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Instead of having #ifdef/#endif blocks inside sync_core() for X86_64 and X86_32, implement the new function iret_to_self() with two versions. In this manner, avoid having to use even more more #ifdef/#endif blocks when adding support for SERIALIZE in sync_core(). Co-developed-by: Tony Luck <[email protected]> Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
…/kernel/git/ssantosh/linux-keystone into arm/drivers SOC: TI Keystone driver update for v5.9 - TI K3 Ring Accelerator updates - Few non critical warining fixes * tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify soc: ti: k3: fix semicolon.cocci warnings soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring' dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair soc: ti: k3-ringacc: separate soc specific initialization soc: ti: k3-ringacc: add request pair of rings api. soc: ti: k3-ringacc: add ring's flags to dump soc: ti: k3-ringacc: Move state tracking variables under a struct dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
…kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.9 - Add ClassD, KSZ ethernet switches, brdige, vlan to sama5_defconfig - Reenable CAN support in sama5_defconfig * tag 'at91-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: sama5: enable CAN PLATFORM driver ARM: configs: at91: sama5: enable bridge and VLAN filtering ARM: configs: at91: sama5: add support for KSZ ethernet switches ARM: configs: at91: sama5: Enable CLASSD Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
Prior to commit: 859d069 ("lockdep: Prepare for NMI IRQ state tracking") IRQ state tracking was disabled in NMIs due to nmi_enter() doing lockdep_off() -- with the obvious requirement that NMI entry call nmi_enter() before trace_hardirqs_off(). [ AFAICT, PowerPC and SH violate this order on their NMI entry ] However, that commit explicitly changed lockdep_hardirqs_*() to ignore lockdep_off() and breaks every architecture that has irq-tracing in it's NMI entry that hasn't been fixed up (x86 being the only fixed one at this point). The reason for this change is that by ignoring lockdep_off() we can: - get rid of 'current->lockdep_recursion' in lockdep_assert_irqs*() which was going to to give header-recursion issues with the seqlock rework. - allow these lockdep_assert_*() macros to function in NMI context. Restore the previous state of things and allow an architecture to opt-in to the NMI IRQ tracking support, however instead of relying on lockdep_off(), rely on in_nmi(), both are part of nmi_enter() and so over-all entry ordering doesn't need to change. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Drop the repeated word "for" in a comment. Signed-off-by: Randy Dunlap <[email protected]> Cc: Srinivas Pandruvada <[email protected]> Cc: [email protected] Cc: Darren Hart <[email protected]> Cc: Andy Shevchenko <[email protected]> Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
Use module_i2c_driver to simplify driver init boilerplate. Signed-off-by: Axel Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Since the host command number 0x012B conflicts with other EC host command, add one to all regulator control related host command. Also fix a wrong alignment on struct and sync the comment with the one in ChromeOS EC codebase. Fixes: dff08ca ("platform/chrome: cros_ec: Add command for regulator control.") Signed-off-by: Pi-Hsun Shih <[email protected]> Acked-by: Enric Balletbo i Serra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
They were never used. Signed-off-by: Thomas Weißschuh <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
The standard attributes were only introduced after the ones from thinkpad_acpi in commit 813cab8 ("power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties"). The new standard attributes are aliased to their previous names, preserving backwards compatibility. Signed-off-by: Thomas Weißschuh <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
Enable runtime pm support for spi-imx driver. Signed-off-by: Clark Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
The spi-sun4i driver already has the ability to do large transfers. However, the max transfer size reported is still fifo depth - 1. Update the max transfer size reported to the max value possible. Fixes: 1967379 ("spi: sun4i: Allow transfers larger than FIFO size") Signed-off-by: Jonathan Liu <[email protected]> Acked-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Silence documentation build warnings by correcting kernel-doc comment for spi_transfer struct. Signed-off-by: Colton Lewis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Acked-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
Recently introduced irqchip flags lack the corresponding printouts in debugfs. Add them. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
…/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The main change in this cycle was to add support for ZSTD-compressed kernel and initrd images. ZSTD has a very fast decompressor, yet it compresses better than gzip" * tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: dontdiff: Add zstd compressed files .gitignore: Add ZSTD-compressed files x86: Add support for ZSTD compressed kernel x86: Bump ZO_z_extra_bytes margin for zstd usr: Add support for zstd compressed initramfs init: Add support for zstd compressed kernel lib: Add zstd support to decompress lib: Prepare zstd for preboot environment, improve performance
…x/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "Misc changes: refresh defconfigs and simplify the boot image link stage" * tag 'x86-build-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/defconfigs: Refresh defconfig files x86/build: Move max-page-size option to LDFLAGS_vmlinux x86/defconfigs: Remove CONFIG_CRYPTO_AES_586 from i386_defconfig
…inux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups all around the place" * tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Initialize pointer bitmap with NULL rather than 0 x86: uv: uv_hub.h: Delete duplicated word x86: cmpxchg_32.h: Delete duplicated word x86: bootparam.h: Delete duplicated word x86/mm: Remove the unused mk_kernel_pgd() #define x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros x86/ioapic: Remove unused "IOAPIC_AUTO" define x86/mm: Drop unused MAX_PHYSADDR_BITS x86/msr: Move the F15h MSRs where they belong x86/idt: Make idt_descr static initrd: Remove erroneous comment x86/mm/32: Fix -Wmissing prototypes warnings for init.c cpu/speculation: Add prototype for cpu_show_srbds() x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c x86/asm: Unify __ASSEMBLY__ blocks x86/cpufeatures: Mark two free bits in word 3 x86/msr: Lift AMD family 0x15 power-specific MSRs
…/kernel/git/tip/tip Pull x86 debug fixlets from Ingo Molnar: "Improve x86 debuggability: print registers with the same log level as the backtrace" * tag 'x86-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Show registers dump with trace's log level x86/dumpstack: Add log_lvl to __show_regs() x86/dumpstack: Add log_lvl to show_iret_regs()
…kernel/git/tip/tip Pull x86 cpu updates from Ingo Molar: - prepare for Intel's new SERIALIZE instruction - enable split-lock debugging on more CPUs - add more Intel CPU models - optimize stack canary initialization a bit - simplify the Spectre logic a bit * tag 'x86-cpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Refactor sync_core() for readability x86/cpu: Relocate sync_core() to sync_core.h x86/cpufeatures: Add enumeration for SERIALIZE instruction x86/split_lock: Enable the split lock feature on Sapphire Rapids and Alder Lake CPUs x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel CPU family x86/stackprotector: Pre-initialize canary for secondary CPUs x86/speculation: Merge one test in spectre_v2_user_select_mitigation()
…kernel/git/tip/tip Pull x86 FPU selftest from Ingo Molnar: "Add the /sys/kernel/debug/selftest_helpers/test_fpu FPU self-test" * tag 'x86-fpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/fpu: Add an FPU selftest
…linux/kernel/git/tip/tip Pull x86 microcode update from Ingo Molnar: "Remove the microcode loader's FW_LOADER coupling" * tag 'x86-microcode-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Do not select FW_LOADER
…/kernel/git/tip/tip Pull x86 MSR filtering from Ingo Molnar: "Filter MSR writes from user-space by default, and print a syslog entry if they happen outside the allowed set of MSRs, which is a single one for now, MSR_IA32_ENERGY_PERF_BIAS. The plan is to eventually disable MSR writes by default (they can still be enabled via allow_writes=on)" * tag 'x86-misc-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Filter MSR writes
…ernel/git/tip/tip Pull x86 mmm update from Ingo Molnar: "The biggest change is to not sync the vmalloc and ioremap ranges for x86-64 anymore" * tag 'x86-mm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/64: Make sync_global_pgds() static x86/mm/64: Do not sync vmalloc/ioremap mappings x86/mm: Pre-allocate P4D/PUD pages for vmalloc area
…inux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The biggest change is the removal of SGI UV1 support, which allowed the removal of the legacy EFI old_mmap code as well. This removes quite a bunch of old code & quirks" * tag 'x86-platform-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Remove unused EFI_UV1_MEMMAP code x86/platform/uv: Remove uv bios and efi code related to EFI_UV1_MEMMAP x86/efi: Remove references to no-longer-used efi_have_uv1_memmap() x86/efi: Delete SGI UV1 detection. x86/platform/uv: Remove efi=old_map command line option x86/platform/uv: Remove vestigial mention of UV1 platform from bios header x86/platform/uv: Remove support for UV1 platform from uv x86/platform/uv: Remove support for uv1 platform from uv_hub x86/platform/uv: Remove support for UV1 platform from uv_bau x86/platform/uv: Remove support for UV1 platform from uv_mmrs x86/platform/uv: Remove support for UV1 platform from x2apic_uv_x x86/platform/uv: Remove support for UV1 platform from uv_tlb x86/platform/uv: Remove support for UV1 platform from uv_time
…ux/kernel/git/tip/tip Pull x86 timer update from Ingo Molnar: "Set the X86_FEATURE_TSC_KNOWN_FREQ flag for Xen guests, to avoid recalibration" * tag 'x86-timers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen/time: Set the X86_FEATURE_TSC_KNOWN_FREQ flag in xen_tsc_khz()
…/kernel/git/tip/tip Pull x86 RAS updates from Ingo Molnar: "Boris is on vacation and he asked us to send you the pending RAS bits: - Print the PPIN field on CPUs that fill them out - Fix an MCE injection bug - Simplify a kzalloc in dev_mcelog_init_device()" * tag 'ras-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce, EDAC/mce_amd: Print PPIN in machine check records x86/mce/dev-mcelog: Use struct_size() helper in kzalloc() x86/mce/inject: Fix a wrong assignment of i_mce.status
…nux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - ASUS WMI driver honors BAT1 name of the battery (quite a few new laptops are using it) - Dell WMI driver supports new key codes and backlight events - ThinkPad ACPI driver now may use standard charge threshold interface, it also has been updated to provide Laptop or Desktop mode to the user - Intel Speed Select Technology gained support on Sapphire Rapids platform - Regular update of Speed Select Technology tools - Mellanox has been updated to support complex attributes - PMC core driver has been fixed to show correct names for LPM0 register - HTTP links were replaced by HTTPS ones where it applies - Miscellaneous fixes and cleanups here and there * tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits) platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures platform/x86: thinkpad_acpi: Make some symbols static platform/x86: thinkpad_acpi: add documentation for battery charge control platform/x86: thinkpad_acpi: use standard charge control attribute names platform/x86: thinkpad_acpi: remove unused defines platform/x86: ISST: drop a duplicated word in isst_if.h tools/power/x86/intel-speed-select: Update version for v5.9 tools/power/x86/intel-speed-select: Add retries for mail box commands tools/power/x86/intel-speed-select: Add option to delay mbox commands tools/power/x86/intel-speed-select: Ignore -o option processing on error tools/power/x86/intel-speed-select: Change path for caching topology info platform/x86: acerhdf: Replace HTTP links with HTTPS ones platform/x86: apple-gmux: Replace HTTP links with HTTPS ones platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED platform/x86: mlx-platform: Extend FAN platform data description platform_data/mlxreg: Add presence register field for FAN devices Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/mellanox: mlxreg-io: Add support for complex attributes platform/x86: mlx-platform: Add more definitions for system attributes platform_data/mlxreg: Add support for complex attributes ...
…ernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "These are the usual updates to arm/arm64 defconfig files, enabling newly added drivers and addressing changes to Kconfig files" * tag 'arm-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: configs: at91: sama5: enable CAN PLATFORM driver ARM: configs: at91: sama5: enable bridge and VLAN filtering ARM: configs: at91: sama5: add support for KSZ ethernet switches arm64: defconfig: Enable AM654x SDHCI controller arm64: arch_k3: enable chipid driver arm/arm64: defconfig: Update configs to use the new CROS_EC options ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500 ARM: tegra: Enable CPUFREQ userspace governor arm64: defconfig: enable CONFIG_FSL_ENETC_QOS arm64: defconfig: enable TSN features for ENETC and similiar hardware ARM: imx_v6_v7_defconfig: Support i.MX8MM arm64: defconfig: enable RTC and audio support on Kontron sl28 boards arm64: defconfig: add pca9450 pmic driver ARM: configs: sunxi: Enable crypto related options ARM: sunxi: configs: Enable the Mailbox driver ARM: configs: sunxi: Enable the PS/2 controller ARM: configs: sunxi: Enable Lima ARM: configs: sunxi: Add DRM output-related options ARM: configs: sunxi: Enable ASoC options ARM: configs: sunxi: Enable Cedrus ...
…it/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and
following the already supported Cortex-A1`5 and Cortex-A57 based
Alpine chips. This one is added together with the official
Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile
phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
of five end-user products are added based on these, all Android
phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals. It is added along with the HopeRun HiHope
RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels and
become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
the Tegra194, their latest 64-bit chip based on Carmel CPU cores
and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added: The
MYiR MYS-6ULX single-board computer, and four different models of
industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards. Beacon EmbeddedWorks adds another
SoM+Carrier development board for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"
* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
...
…git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "These are mostly cosmetic changes and minor bugfixes for the SoC specific code, across the 32-bit at91, mvebu, davinci, samsung, and omap platforms. The main notable changes are for the Samsung Exynos platform, which sees a rewrite of gpio handling and a change to restore and adds a workaround for a problem with cpuidle support" * tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh() MAINTAINERS: arm/amlogic: add designated reviewers ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()' ARM: davinci: Fix trivial spelling ARM: davinci: Replace HTTP links with HTTPS ones ARM: s3c24xx: Replace HTTP links with HTTPS ones ARM: orion/gpio: Make use of for_each_requested_gpio() ARM: at91: Replace HTTP links with HTTPS ones ARM: at91: pm: add missing put_device() call in at91_pm_sram_init() ARM: rpc: Change blacklist to quirklist in ecode.c file ARM: OMAP: Replace HTTP links with HTTPS ones ARM: s3c24xx: leds: Convert to use GPIO descriptors udc: lpc32xx: mark local function static ARM: exynos: MCPM: Restore big.LITTLE cpuidle support ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val
…nel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
…el/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are three SoC families newly dded to the 32-bit and 64-bit Arm
architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012.
For now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores"
* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: mstar: Correct the compatible string for pmsleep
dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
ARM: mstar: Add reboot support
ARM: mstar: Add "pmsleep" node to base dtsi
ARM: mstar: Add PMU
ARM: mstar: Adjust IMI size for infinity3
ARM: mstar: Adjust IMI size for mercury5
ARM: mstar: Adjust IMI size of infinity
ARM: mstar: Add IMI SRAM region
dt-bindings: arm: mstar: Move existing MStar binding descriptions
dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
ARM: mstar: Fix dts filename for 70mai midrive d08
ARM: mstar: Add dts for 70mai midrive d08
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
...
…x/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"Boris is on vacation and aske me to send you the EDAC changes"
* tag 'edac_updates_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix reference count leaks
EDAC: Remove edac_get_dimm_by_index()
EDAC/ghes: Scan the system once on driver init
EDAC/ghes: Remove unused members of struct ghes_edac_pvt, rename it to ghes_pvt
EDAC/ghes: Setup DIMM label from DMI and use it in error reports
EDAC, {skx,i10nm}: Use CPU stepping macro to pass configurations
EDAC/mc: Call edac_inc_ue_error() before panic
EDAC, pnd2: Set MCE_PRIO_EDAC priority for pnd2_mce_dec notifier
…el/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This time around the bulk of the work on the regulator API has been
cleanups of various kinds, partly but not entirely inspired by the W=1
stuff that 0day turned on.
There's also been a fairly large crop of new drivers, and a few
bugfixes for existing drivers.
- Mode setting support for MT6397 and DA9211.
- New drivers for ChromeOS embedded controllers, Fairchild FAN53880,
NXP PCA9450, Qualcomm LABIBB, MP5496, and VBUS booster, and Silergy
SY8827N"
* tag 'regulator-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (67 commits)
regulator: add the sub node names for the MP5496 PMIC
regulator: cros-ec-regulator: Fix double free of desc->name.
platform/chrome: cros_ec: Fix host command for regulator control.
regulator: pca9450: Convert to use module_i2c_driver
regulator: fix memory leak on error path of regulator_register()
regulator: Replace HTTP links with HTTPS ones
regulator: convert QCOM SMD-RPM regulator document to YAML schema
regulator: gpio: Honor regulator-boot-on property
regulator: core: Add destroy_regulator()
regulator: Correct kernel-doc inconsistency
regulator: Add labibb regulator binding
regulator: qcom: Add labibb driver
regulator: Allow regulators to verify enabled during enable()
regulator: cros-ec: Constify cros_ec_regulator_voltage_ops
regulator: devres: Standardise on function documentation headers
regulator: of_regulator: Add missing colon for rdev kerneldoc argument
regulator: devres: Fix issues with kerneldoc headers
regulator: fan53880: Add support for COMPILE_TEST
regulator: fan53880: Add missing .owner field in regulator_desc
dt-bindings: regulator: add pca9450 regulator yaml
...
…/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, nothing really going on in the core
although there's been quite a bit of driver related activity.
This includes the addition of some shared code in drivers/memory for
the Renesas RPC-IF which is used by a newly added SPI driver, the
memory subsystem doesn't seem to have a fixed maintainer at the minute
and this seemed like the most sensible way to get that hardware
supported.
- Quite a few cleanups and optimizations for the Altera, Qualcomm
GENI, sun6i and lantiq drivers.
- Several more GPIO descriptor conversions.
- Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.
- New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
R8A774e1"
* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
dt-bindings: lpspi: New property in document DT bindings for LPSPI
spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
spi: lpspi: remove unused fsl_lpspi->chipselect
spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
spi: rockchip: Fix error in SPI slave pio read
spi: rockchip: Support 64-location deep FIFOs
spi: rockchip: Config spi rx dma burst size depend on xfer length
spi: spi-topcliff-pch: drop call to wakeup-disable
spi: spidev: Align buffers for DMA
spi: correct kernel-doc inconsistency
spi: sun4i: update max transfer size reported
spi: imx: enable runtime pm support
spi: update bindings for MT8192 SoC
spi: mediatek: add spi support for mt8192 IC
spi: Add bindings for Lightning Mountain SoC
spi: lantiq: Add support to Lightning Mountain SoC
spi: lantiq: Move interrupt configuration to SoC specific data structure
spi: lantiq: Add fifo size bit mask in SoC specific data structure
spi: lantiq: Add support to acknowledge interrupt
spi: lantiq: Move interrupt control register offesets to SoC specific data structure
...
…git/broonie/regmap Pull regmap updates from Mark Brown: "This release we've seen a couple of updates to make some DT based APIs use fwnode instead, allowing their use with ACPI systems, and a few cleanups" * tag 'regmap-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix duplicated word in <linux/regmap.h> regmap: Switch to use fwnode instead of OF one regmap-irq: use fwnode instead of device node in add_irq_chip() regmap: remove stray space regmap: convert all regmap_update_bits() and co. macros to static inlines
pull bot
pushed a commit
that referenced
this pull request
Jan 22, 2021
I was hitting the below panic continuously when attaching kprobes to scheduler functions [ 159.045212] Unexpected kernel BRK exception at EL1 [ 159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP [ 159.059954] Modules linked in: [ 159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f6ccd #56 [rt-app] <notice> [1] Exiting.[ 159.071166] Hardware name: ARM Juno development board (r2) (DT) [ 159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--) [ 159.085723] pc : 0xffff80001624501c [ 159.089377] lr : attach_entity_load_avg+0x2ac/0x350 [ 159.094271] sp : ffff80001622b640 [rt-app] <notice> [0] Exiting.[ 159.097591] x29: ffff80001622b640 x28: 0000000000000001 [ 159.105515] x27: 0000000000000049 x26: ffff000800b79980 [ 159.110847] x25: ffff00097ef37840 x24: 0000000000000000 [ 159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90 [ 159.121663] x21: ffff00097ef37700 x20: ffff800010119170 [rt-app] <notice> [11] Exiting.[ 159.126995] x19: ffff00097ef37840 x18: 000000000000000e [ 159.135003] x17: 0000000000000001 x16: 0000000000000019 [ 159.140335] x15: 0000000000000000 x14: 0000000000000000 [ 159.145666] x13: 0000000000000002 x12: 0000000000000002 [ 159.150996] x11: ffff80001592f9f0 x10: 0000000000000060 [ 159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1 [ 159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000 [ 159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000 [ 159.172321] x3 : ffff000800328948 x2 : 0000000000000000 [ 159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90 [ 159.182983] Call trace: [ 159.185433] 0xffff80001624501c [ 159.188581] update_load_avg+0x2d0/0x778 [ 159.192516] enqueue_task_fair+0x134/0xe20 [ 159.196625] enqueue_task+0x4c/0x2c8 [ 159.200211] ttwu_do_activate+0x70/0x138 [ 159.204147] sched_ttwu_pending+0xbc/0x160 [ 159.208253] flush_smp_call_function_queue+0x16c/0x320 [ 159.213408] generic_smp_call_function_single_interrupt+0x1c/0x28 [ 159.219521] ipi_handler+0x1e8/0x3c8 [ 159.223106] handle_percpu_devid_irq+0xd8/0x460 [ 159.227650] generic_handle_irq+0x38/0x50 [ 159.231672] __handle_domain_irq+0x6c/0xc8 [ 159.235781] gic_handle_irq+0xcc/0xf0 [ 159.239452] el1_irq+0xb4/0x180 [ 159.242600] rcu_is_watching+0x28/0x70 [ 159.246359] rcu_read_lock_held_common+0x44/0x88 [ 159.250991] rcu_read_lock_any_held+0x30/0xc0 [ 159.255360] kretprobe_dispatcher+0xc4/0xf0 [ 159.259555] __kretprobe_trampoline_handler+0xc0/0x150 [ 159.264710] trampoline_probe_handler+0x38/0x58 [ 159.269255] kretprobe_trampoline+0x70/0xc4 [ 159.273450] run_rebalance_domains+0x54/0x80 [ 159.277734] __do_softirq+0x164/0x684 [ 159.281406] irq_exit+0x198/0x1b8 [ 159.284731] __handle_domain_irq+0x70/0xc8 [ 159.288840] gic_handle_irq+0xb0/0xf0 [ 159.292510] el1_irq+0xb4/0x180 [ 159.295658] arch_cpu_idle+0x18/0x28 [ 159.299245] default_idle_call+0x9c/0x3e8 [ 159.303265] do_idle+0x25c/0x2a8 [ 159.306502] cpu_startup_entry+0x2c/0x78 [ 159.310436] secondary_start_kernel+0x160/0x198 [ 159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0) After a bit of head scratching and debugging it turned out that it is due to kprobe handler being interrupted by a tick that causes us to go into (I think another) kprobe handler. The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR which leads to the Unexpected kernel BRK exception. Reverting commit ba090f9 ("arm64: kprobes: Remove redundant kprobe_step_ctx") seemed to fix the problem for me. Further analysis showed that kcb->kprobe_status is set to KPROBE_REENTER when the error occurs. By teaching kprobe_breakpoint_ss_handler() to handle this status I can no longer reproduce the problem. Fixes: ba090f9 ("arm64: kprobes: Remove redundant kprobe_step_ctx") Signed-off-by: Qais Yousef <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Apr 29, 2021
Clean up the code to use the "mmc" directly instead of "host->mmc".
If the code sits in hot code path, this clean up also brings trvial
performance improvement. Take the sdhci_post_req() for example:
before the patch:
...
8d0: a9be7bfd stp x29, x30, [sp, #-32]!
8d4: 910003fd mov x29, sp
8d8: f9000bf3 str x19, [sp, #16]
8dc: f9400833 ldr x19, [x1, #16]
8e0: b9404261 ldr w1, [x19, #64]
8e4: 34000161 cbz w1, 910 <sdhci_post_req+0x50>
8e8: f9424400 ldr x0, [x0, #1160]
8ec: d2800004 mov x4, #0x0 // #0
8f0: b9401a61 ldr w1, [x19, #24]
8f4: b9403262 ldr w2, [x19, #48]
8f8: f9400000 ldr x0, [x0]
8fc: f278003f tst x1, #0x100
900: f9401e61 ldr x1, [x19, #56]
904: 1a9f17e3 cset w3, eq // eq = none
908: 11000463 add w3, w3, #0x1
90c: 94000000 bl 0 <dma_unmap_sg_attrs>
...
After the patch:
...
8d0: a9be7bfd stp x29, x30, [sp, #-32]!
8d4: 910003fd mov x29, sp
8d8: f9000bf3 str x19, [sp, #16]
8dc: f9400833 ldr x19, [x1, #16]
8e0: b9404261 ldr w1, [x19, #64]
8e4: 34000141 cbz w1, 90c <sdhci_post_req+0x4c>
8e8: b9401a61 ldr w1, [x19, #24]
8ec: d2800004 mov x4, #0x0 // #0
8f0: b9403262 ldr w2, [x19, #48]
8f4: f9400000 ldr x0, [x0]
8f8: f278003f tst x1, #0x100
8fc: f9401e61 ldr x1, [x19, #56]
900: 1a9f17e3 cset w3, eq // eq = none
904: 11000463 add w3, w3, #0x1
908: 94000000 bl 0 <dma_unmap_sg_attrs>
...
We saved one ldr instruction: "ldr x0, [x0, #1160]"
Signed-off-by: Jisheng Zhang <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Jul 3, 2021
The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of
"annotate". As a result, perf annotate does not support parsing itrace data.
Before:
# perf record -e arm_spe_0/branch_filter=1/ -a sleep 1
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 20.874 MB perf.data ]
# perf annotate --stdio
Error:
The perf.data data has no samples!
Solution:
1. Add itrace options in help,
2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool.
After:
# perf record --all-user -e arm_spe_0/branch_filter=1/ ls
Couldn't synthesize bpf events.
perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB perf.data ]
# perf annotate --stdio
Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period)
------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 0000000000066180 <__getdelim@@GLIBC_2.17>:
0.00 : 66180: stp x29, x30, [sp, #-96]!
0.00 : 66184: cmp x0, #0x0
0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any
0.00 : 6618c: mov x29, sp
0.00 : 66190: stp x24, x25, [sp, #56]
0.00 : 66194: stp x26, x27, [sp, #72]
0.00 : 66198: str x28, [sp, #88]
0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none
0.00 : 661a0: stp x22, x23, [x29, #40]
0.00 : 661a4: mov x22, x1
0.00 : 661a8: ldr w1, [x3]
0.00 : 661ac: mov w23, w2
0.00 : 661b0: stp x20, x21, [x29, #24]
0.00 : 661b4: mov x20, x3
0.00 : 661b8: mov x21, x0
0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0>
0.00 : 661c0: ldr x0, [x3, #136]
0.00 : 661c4: ldr x2, [x0, #8]
0.00 : 661c8: str x19, [x29, #16]
0.00 : 661cc: mrs x19, tpidr_el0
0.00 : 661d0: sub x19, x19, #0x700
0.00 : 661d4: cmp x2, x19
0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none
0.00 : 661dc: mov w1, #0x1 // #1
0.00 : 661e0: ldaxr w2, [x0]
0.00 : 661e4: cmp w2, #0x0
0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any
0.00 : 661ec: stxr w3, w1, [x0]
0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60>
0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any
0.00 : 661f8: ldr x0, [x20, #136]
0.00 : 661fc: ldr w1, [x20]
0.00 : 66200: ldr w2, [x0, #4]
0.00 : 66204: str x19, [x0, #8]
0.00 : 66208: add w2, w2, #0x1
0.00 : 6620c: str w2, [x0, #4]
0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208>
0.00 : 66214: ldr x19, [x29, #16]
0.00 : 66218: ldr x0, [x21]
0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8>
0.00 : 66220: ldr x0, [x22]
0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc>
0.00 : 66228: mov x0, #0x78 // #120
0.00 : 6622c: str x0, [x22]
0.00 : 66230: bl 20710 <malloc@plt>
0.00 : 66234: str x0, [x21]
0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8>
0.00 : 6623c: ldr x27, [x20, #8]
0.00 : 66240: str x19, [x29, #16]
0.00 : 66244: ldr x19, [x20, #16]
0.00 : 66248: sub x19, x19, x27
0.00 : 6624c: cmp x19, #0x0
0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218>
0.00 : 66254: mov x25, #0x0 // #0
0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158>
0.00 : 6625c: nop
0.00 : 66260: add x24, x19, x25
0.00 : 66264: ldr x3, [x22]
0.00 : 66268: add x26, x24, #0x1
0.00 : 6626c: ldr x0, [x21]
0.00 : 66270: cmp x3, x26
0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast
0.00 : 66278: lsl x3, x3, #1
0.00 : 6627c: cmp x3, x26
0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast
0.00 : 66284: mov x1, x26
0.00 : 66288: bl 206f0 <realloc@plt>
0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8>
0.00 : 66290: str x0, [x21]
0.00 : 66294: ldr x27, [x20, #8]
0.00 : 66298: str x26, [x22]
0.00 : 6629c: mov x2, x19
0.00 : 662a0: mov x1, x27
0.00 : 662a4: add x0, x0, x25
0.00 : 662a8: bl 87390 <explicit_bzero@@GLIBC_2.25+0x50>
0.00 : 662ac: ldr x0, [x20, #8]
0.00 : 662b0: add x19, x0, x19
0.00 : 662b4: str x19, [x20, #8]
0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290>
0.00 : 662bc: mov x0, x20
0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 662c4: cmn w0, #0x1
0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none
0.00 : 662cc: ldp x27, x19, [x20, #8]
0.00 : 662d0: mov x25, x24
0.00 : 662d4: sub x19, x19, x27
0.00 : 662d8: mov x2, x19
0.00 : 662dc: mov w1, w23
0.00 : 662e0: mov x0, x27
0.00 : 662e4: bl 807b0 <memchr@@GLIBC_2.17>
0.00 : 662e8: cmp x0, #0x0
0.00 : 662ec: mov x28, x0
0.00 : 662f0: sub x0, x0, x27
0.00 : 662f4: csinc x19, x19, x0, eq // eq = none
0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807
0.00 : 662fc: sub x0, x0, x25
0.00 : 66300: cmp x19, x0
0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop
0.00 : 66308: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 6630c: ldr x0, [x0, #3624]
0.00 : 66310: mrs x2, tpidr_el0
0.00 : 66314: ldr x19, [x29, #16]
0.00 : 66318: mov w3, #0x4b // #75
0.00 : 6631c: ldr w1, [x20]
0.00 : 66320: mov x24, #0xffffffffffffffff // #-1
0.00 : 66324: str w3, [x2, x0]
0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 6632c: ldr x0, [x20, #136]
0.00 : 66330: ldr w1, [x0, #4]
0.00 : 66334: sub w1, w1, #0x1
0.00 : 66338: str w1, [x0, #4]
0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238>
0.00 : 66340: mov x0, x24
0.00 : 66344: ldr x28, [sp, #88]
0.00 : 66348: ldp x20, x21, [x29, #24]
0.00 : 6634c: ldp x22, x23, [x29, #40]
0.00 : 66350: ldp x24, x25, [sp, #56]
0.00 : 66354: ldp x26, x27, [sp, #72]
0.00 : 66358: ldp x29, x30, [sp], #96
0.00 : 6635c: ret
100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98>
0.00 : 66364: ldp x20, x21, [x29, #24]
0.00 : 66368: mov x24, #0xffffffffffffffff // #-1
0.00 : 6636c: ldp x22, x23, [x29, #40]
0.00 : 66370: mov x0, x24
0.00 : 66374: ldp x24, x25, [sp, #56]
0.00 : 66378: ldp x26, x27, [sp, #72]
0.00 : 6637c: ldr x28, [sp, #88]
0.00 : 66380: ldp x29, x30, [sp], #96
0.00 : 66384: ret
0.00 : 66388: mov x24, #0xffffffffffffffff // #-1
0.00 : 6638c: ldr x19, [x29, #16]
0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66394: nop
0.00 : 66398: mov x0, x20
0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 663a0: cmn w0, #0x1
0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none
0.00 : 663a8: ldp x27, x19, [x20, #8]
0.00 : 663ac: sub x19, x19, x27
0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4>
0.00 : 663b4: nop
0.00 : 663b8: str xzr, [x0, #8]
0.00 : 663bc: ldxr w2, [x0]
0.00 : 663c0: stlxr w3, w1, [x0]
0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c>
0.00 : 663c8: cmp w2, #0x1
0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 663d0: mov x1, #0x81 // #129
0.00 : 663d4: mov x2, #0x1 // #1
0.00 : 663d8: mov x3, #0x0 // #0
0.00 : 663dc: mov x8, #0x62 // #98
0.00 : 663e0: svc #0x0
0.00 : 663e4: ldp x20, x21, [x29, #24]
0.00 : 663e8: ldp x22, x23, [x29, #40]
0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 663f0: ldr w2, [x0, #4]
0.00 : 663f4: add w2, w2, #0x1
0.00 : 663f8: str w2, [x0, #4]
0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94>
0.00 : 66400: mov x24, #0xffffffffffffffff // #-1
0.00 : 66404: ldr x19, [x29, #16]
0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0>
0.00 : 6640c: nop
0.00 : 66410: ldr x0, [x21]
0.00 : 66414: strb wzr, [x0, x24]
0.00 : 66418: ldr w1, [x20]
0.00 : 6641c: ldr x19, [x29, #16]
0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66424: nop
0.00 : 66428: mov x24, #0xffffffffffffffff // #-1
0.00 : 6642c: ldr w1, [x20]
0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66434: nop
0.00 : 66438: mov x24, #0xffffffffffffffff // #-1
0.00 : 6643c: ldr w1, [x20]
0.00 : 66440: ldr x19, [x29, #16]
0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66448: bl e3ba0 <pthread_setcanceltype@@GLIBC_2.17+0x30>
0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78>
0.00 : 66450: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 66454: ldr x0, [x0, #3624]
0.00 : 66458: mrs x1, tpidr_el0
0.00 : 6645c: mov w2, #0x16 // #22
0.00 : 66460: mov x24, #0xffffffffffffffff // #-1
0.00 : 66464: str w2, [x1, x0]
0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 6646c: ldr w1, [x20]
0.00 : 66470: mov x4, x0
0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 66478: ldr x0, [x20, #136]
0.00 : 6647c: ldr w1, [x0, #4]
0.00 : 66480: sub w1, w1, #0x1
0.00 : 66484: str w1, [x0, #4]
0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314>
0.00 : 6648c: mov x0, x4
0.00 : 66490: bl 20e40 <gnu_get_libc_version@@GLIBC_2.17+0x130>
0.00 : 66494: str xzr, [x0, #8]
0.00 : 66498: ldxr w2, [x0]
0.00 : 6649c: stlxr w3, w1, [x0]
0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318>
0.00 : 664a4: cmp w2, #0x1
0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 664ac: mov x1, #0x81 // #129
0.00 : 664b0: mov x2, #0x1 // #1
0.00 : 664b4: mov x3, #0x0 // #0
0.00 : 664b8: mov x8, #0x62 // #98
0.00 : 664bc: svc #0x0
0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c>
Signed-off-by: Yang Jihong <[email protected]>
Tested-by: Leo Yan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Oct 20, 2023
…ress If we specify a valid CQ ring address but an invalid SQ ring address, we'll correctly spot this and free the allocated pages and clear them to NULL. However, we don't clear the ring page count, and hence will attempt to free the pages again. We've already cleared the address of the page array when freeing them, but we don't check for that. This causes the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Oops [#1] Modules linked in: CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty #56 Hardware name: ucbbar,riscvemu-bare (DT) Workqueue: events_unbound io_ring_exit_work epc : io_pages_free+0x2a/0x58 ra : io_rings_free+0x3a/0x50 epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0 status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d [<ffffffff808811a2>] io_pages_free+0x2a/0x58 [<ffffffff80881406>] io_rings_free+0x3a/0x50 [<ffffffff80882176>] io_ring_exit_work+0x37e/0x424 [<ffffffff80027234>] process_one_work+0x10c/0x1f4 [<ffffffff8002756e>] worker_thread+0x252/0x31c [<ffffffff8002f5e4>] kthread+0xc4/0xe0 [<ffffffff8000332a>] ret_from_fork+0xa/0x1c Check for a NULL array in io_pages_free(), but also clear the page counts when we free them to be on the safer side. Reported-by: [email protected] Fixes: 03d89a2 ("io_uring: support for user allocated memory for rings/sqes") Cc: [email protected] Reviewed-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
May 24, 2024
Christoph reported the following splat: WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0 Modules linked in: CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759 Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80 RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293 RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64 R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000 R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800 FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786 do_accept+0x435/0x620 net/socket.c:1929 __sys_accept4_file net/socket.c:1969 [inline] __sys_accept4+0x9b/0x110 net/socket.c:1999 __do_sys_accept net/socket.c:2016 [inline] __se_sys_accept net/socket.c:2013 [inline] __x64_sys_accept+0x7d/0x90 net/socket.c:2013 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x4315f9 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300 R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055 </TASK> The reproducer invokes shutdown() before entering the listener status. After commit 9406279 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets"), the above causes the child to reach the accept syscall in FIN_WAIT1 status. Eric noted we can relax the existing assertion in __inet_accept() Reported-by: Christoph Paasch <[email protected]> Closes: multipath-tcp/mptcp_net-next#490 Suggested-by: Eric Dumazet <[email protected]> Fixes: 9406279 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets") Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )