-
Notifications
You must be signed in to change notification settings - Fork 54.3k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Change "M" to "N" #318
base: master
Are you sure you want to change the base?
Change "M" to "N" #318
Conversation
This repo is mirror-only, nothing will be accepted here for legitimate reasons. See:
|
Well how to make a bug report when the issues Tab is not set on the Repo. consider Setting it up with 1 check in the Repo's settings. Also I like the Linux Kernel but the only thing bad with it is that it does not have a simple way to connecting to the Internet just by simply clicking on the Internet Router Name and entering a password to automatically resolve all of the harder settings like windows does. Until that is taken cared of I am sticking to Windows 7 Ultimate x64. Also I do not like how you cannot install python 3.4.2, 3.4.3, 3.4.4, 3.4.5, 3.5.0, 3.5.1, or even 3.5.2 without them overwriting eachother if it was possible to install all of those versions of that interpreter like you can on windows it would simplify my project's zip making without having to install python to those pecific versions just to build my zip files. So as such if they named everything with the Also Linux that I currently have seems to ship by default with python 2.7.x I recommend only forcing it to ship with 3.5.x to favor asyncio. (For coroutines) |
Install Gentoo, here you can have all python versions at the same time. |
Python 3.5 as default would break tonnes of install scripts, there's stuff like virtualenv for dealing with multiple versions |
Also, I'm not sure what Python or UI for connecting to routers has to do with the kernel.... |
As warned by checkpatch: WARNING: struct of_device_id should normally be const torvalds#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]>
As warned by checkpatch: WARNING: struct of_device_id should normally be const torvalds#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]>
lkl: add TSO6 for tap device
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit 126f52b)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit d2fe28f)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit 126f52b)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit d2fe28f)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit 126f52b)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit d2fe28f)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit 126f52b)
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit d2fe28f)
As warned by checkpatch: WARNING: struct of_device_id should normally be const torvalds#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit 126f52b)
As warned by checkpatch: WARNING: struct of_device_id should normally be const torvalds#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: Mauro Carvalho Chehab <[email protected]> (cherry picked from commit d2fe28f)
This patch fixes a several locking problem. 1. netdevsim basic operations(new_device, del_device, new_port, and del_port) are called with sysfs. These operations use the same resource so they should acquire a lock for the whole resource not only for a list. 2. devices are managed by nsim_bus_dev_list. and all devices are deleted in the __exit() routine. After delete routine, new_device() and del_device() should be disallowed. So, the global flag variable 'enable' is added. 3. new_port() and del_port() would be called before resources are allocated or initialized. If so, panic will occur. In order to avoid this scenario, variable 'nsim_bus_dev->init' is added. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 66.648015][ T1095] kasan: CONFIG_KASAN_INLINE enabled [ 66.660685][ T1095] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 66.662106][ T1095] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.663151][ T1095] CPU: 0 PID: 1095 Comm: bash Not tainted 5.5.0-rc6+ torvalds#318 [ 66.664046][ T1095] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 66.665308][ T1095] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 66.666056][ T1095] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 70 c4 66 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 f [ 66.670158][ T1095] RSP: 0018:ffff8880d36efbb0 EFLAGS: 00010206 [ 66.672254][ T1095] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 66.673392][ T1095] RDX: 0000000000000021 RSI: ffffffffbb922ac0 RDI: 0000000000000108 [ 66.674563][ T1095] RBP: ffff8880d36efd30 R08: ffffffffc033ead0 R09: 0000000000000000 [ 66.675731][ T1095] R10: ffff8880d36efd50 R11: ffff8880ca1f8040 R12: 0000000000000000 [ 66.676897][ T1095] R13: dffffc0000000000 R14: ffffffffbd17a7c0 R15: 00000000000000a0 [ 66.678005][ T1095] FS: 00007fe4a170f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 66.679101][ T1095] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.679906][ T1095] CR2: 000055fa392f7ca0 CR3: 00000000b136a003 CR4: 00000000000606f0 [ 66.681467][ T1095] Call Trace: [ 66.681899][ T1095] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 66.682681][ T1095] ? mutex_lock_io_nested+0x1380/0x1380 [ 66.683371][ T1095] ? _kstrtoull+0x76/0x160 [ 66.683819][ T1095] ? _parse_integer+0xf0/0xf0 [ 66.684324][ T1095] ? kernfs_fop_write+0x1cf/0x410 [ 66.684861][ T1095] ? sysfs_file_ops+0x160/0x160 [ 66.687441][ T1095] ? kstrtouint+0x86/0x110 [ 66.687961][ T1095] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 66.688646][ T1095] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 66.689269][ T1095] ? sysfs_file_ops+0x160/0x160 [ 66.690547][ T1095] new_port_store+0x99/0xb0 [netdevsim] [ 66.691114][ T1095] ? del_port_store+0xb0/0xb0 [netdevsim] [ 66.691699][ T1095] ? sysfs_file_ops+0x112/0x160 [ 66.692193][ T1095] ? sysfs_kf_write+0x3b/0x180 [ 66.692677][ T1095] kernfs_fop_write+0x276/0x410 [ 66.693176][ T1095] ? __sb_start_write+0x215/0x2e0 [ 66.693695][ T1095] vfs_write+0x197/0x4a0 [ 66.694136][ T1095] ksys_write+0x141/0x1d0 [ ... ] Fixes: f9d9db4 ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c0 ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <[email protected]>
devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 1067.313531][ T1480] kernel BUG at lib/list_debug.c:53! [ 1067.314519][ T1480] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1067.315948][ T1480] CPU: 3 PID: 1480 Comm: bash Tainted: G W 5.5.0-rc6+ torvalds#318 [ 1067.326082][ T1480] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 1067.356308][ T1480] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 1067.357006][ T1480] Code: 89 ea 48 c7 c7 a0 64 1e 9f e8 7f 5b 4d ff 0f 0b 48 c7 c7 00 65 1e 9f e8 71 5b 4d ff 4 [ 1067.395359][ T1480] RSP: 0018:ffff8880a316fb58 EFLAGS: 00010282 [ 1067.396016][ T1480] RAX: 0000000000000054 RBX: ffff8880c0e76718 RCX: 0000000000000000 [ 1067.402370][ T1480] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed101462df61 [ 1067.430844][ T1480] RBP: ffff8880a31bfca0 R08: ffffed101b5404f9 R09: ffffed101b5404f9 [ 1067.432165][ T1480] R10: 0000000000000001 R11: ffffed101b5404f8 R12: ffff8880a316fcb0 [ 1067.433526][ T1480] R13: ffff8880a310d440 R14: ffffffffa117a7c0 R15: ffff8880c0e766c0 [ 1067.435818][ T1480] FS: 00007f001c026740(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000 [ 1067.441677][ T1480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1067.451305][ T1480] CR2: 00007f001afb7180 CR3: 00000000a3170003 CR4: 00000000000606e0 [ 1067.453416][ T1480] Call Trace: [ 1067.453832][ T1480] mutex_remove_waiter+0x101/0x520 [ 1067.455949][ T1480] __mutex_lock+0xac7/0x14b0 [ 1067.456880][ T1480] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 1067.458946][ T1480] ? mutex_lock_io_nested+0x1380/0x1380 [ 1067.460614][ T1480] ? _parse_integer+0xf0/0xf0 [ 1067.472498][ T1480] ? kstrtouint+0x86/0x110 [ 1067.473327][ T1480] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 1067.474187][ T1480] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 1067.474980][ T1480] new_port_store+0xc4/0xf0 [netdevsim] [ 1067.475717][ T1480] ? del_port_store+0xf0/0xf0 [netdevsim] [ 1067.476478][ T1480] ? sysfs_kf_write+0x3b/0x180 [ 1067.477106][ T1480] ? sysfs_file_ops+0x160/0x160 [ 1067.477744][ T1480] kernfs_fop_write+0x276/0x410 [ ... ] Fixes: 4418f86 ("netdevsim: implement support for devlink region and snapshots") Fixes: 75ba029 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <[email protected]>
When netdevsim dev is being created, a debugfs directory is created. The variable "dev_ddir_name" is 16bytes device name pointer and device name is "netdevsim<dev id>". The maximum dev id length is 10. So, 16bytes for device name isn't enough. Test commands: modprobe netdevsim echo "1000000000 0" > /sys/bus/netdevsim/new_device Splat looks like: [ 362.229174][ T889] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880 [ 362.230221][ T889] Write of size 1 at addr ffff8880c1def988 by task bash/889 [ 362.231541][ T889] [ 362.232116][ T889] CPU: 2 PID: 889 Comm: bash Not tainted 5.5.0-rc6+ torvalds#318 [ 362.233233][ T889] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 362.237316][ T889] Call Trace: [ 362.237790][ T889] dump_stack+0x96/0xdb [ 362.238471][ T889] ? number+0x824/0x880 [ 362.239137][ T889] print_address_description.constprop.5+0x1be/0x360 [ 362.240166][ T889] ? number+0x824/0x880 [ 362.240782][ T889] ? number+0x824/0x880 [ 362.254907][ T889] __kasan_report+0x12a/0x16f [ 362.276693][ T889] ? number+0x824/0x880 [ 362.284345][ T889] kasan_report+0xe/0x20 [ 362.291523][ T889] number+0x824/0x880 [ 362.305981][ T889] ? put_dec+0xa0/0xa0 [ 362.306583][ T889] ? rcu_read_lock_sched_held+0x90/0xc0 [ 362.307779][ T889] vsnprintf+0x63c/0x10b0 [ 362.308440][ T889] ? pointer+0x5b0/0x5b0 [ 362.309068][ T889] ? mark_lock+0x11d/0xc40 [ 362.309740][ T889] sprintf+0x9b/0xd0 [ 362.327152][ T889] ? scnprintf+0xe0/0xe0 [ 362.327888][ T889] nsim_dev_probe+0x63c/0xbf0 [netdevsim] [ 362.328882][ T889] ? kernfs_next_descendant_post+0x11d/0x250 [ 362.331521][ T889] ? nsim_dev_reload_up+0x500/0x500 [netdevsim] [ 362.333054][ T889] ? kernfs_add_one+0x2c6/0x410 [ 362.334145][ T889] ? kernfs_get.part.12+0x4c/0x60 [ 362.335181][ T889] ? kernfs_put+0x29/0x4b0 [ 362.335814][ T889] ? kernfs_create_link+0x170/0x230 [ 362.336600][ T889] ? sysfs_do_create_link_sd.isra.2+0x87/0xf0 [ 362.338118][ T889] really_probe+0x4b2/0xb50 [ 362.338789][ T889] ? driver_allows_async_probing+0x110/0x110 [ 362.340055][ T889] driver_probe_device+0x24d/0x370 [ 362.349864][ T889] ? __device_attach_driver+0xae/0x210 [ 362.364057][ T889] ? driver_allows_async_probing+0x110/0x110 [ 362.367598][ T889] bus_for_each_drv+0x10f/0x190 [ 362.371583][ T889] ? bus_rescan_devices+0x20/0x20 [ 362.372524][ T889] ? mutex_lock_io_nested+0x1380/0x1380 [ 362.374546][ T889] __device_attach+0x1b1/0x2d0 [ 362.376621][ T889] ? device_bind_driver+0xa0/0xa0 [ 362.378889][ T889] ? wait_for_completion+0x390/0x390 [ 362.379727][ T889] bus_probe_device+0x1a7/0x250 [ 362.380635][ T889] device_add+0x1101/0x1900 [ 362.381590][ T889] ? memset+0x1f/0x40 [ 362.382409][ T889] ? lockdep_init_map+0x10c/0x630 [ 362.383701][ T889] ? device_link_remove+0x120/0x120 [ 362.386953][ T889] ? lockdep_init_map+0x10c/0x630 [ 362.387656][ T889] ? __init_waitqueue_head+0x3a/0x90 [ 362.388868][ T889] new_device_store+0x277/0x4c0 [netdevsim] [ 362.389822][ T889] ? del_port_store+0x160/0x160 [netdevsim] [ ... ] Fixes: ab1d0cc ("netdevsim: change debugfs tree topology") Signed-off-by: Taehee Yoo <[email protected]>
When running liburing test case 'accept', I got below warning: RED: Invalid credentials RED: At include/linux/cred.h:285 RED: Specified credentials: 00000000d02474a0 RED: ->magic=4b, put_addr=000000005b4f46e9 RED: ->usage=-1699227648, subscr=-25693 RED: ->*uid = { 256,-25693,-25693,65534 } RED: ->*gid = { 0,-1925859360,-1789740800,-1827028688 } RED: ->security is 00000000258c136e eneral protection fault, probably for non-canonical address 0xdead4ead00000000: 0000 [#1] SMP PTI PU: 21 PID: 2037 Comm: accept Not tainted 5.6.0+ #318 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 IP: 0010:dump_invalid_creds+0x16f/0x184 ode: 48 8b 83 88 00 00 00 48 3d ff 0f 00 00 76 29 48 89 c2 81 e2 00 ff ff ff 48 81 fa 00 6b 6b 6b 74 17 5b 48 c7 c7 4b b1 10 8e 5d <8b> 50 04 41 5c 8b 30 41 5d e9 67 e3 04 00 5b 5d 41 5c 41 5d c3 0f SP: 0018:ffffacc1039dfb38 EFLAGS: 00010087 AX: dead4ead00000000 RBX: ffff9ba39319c100 RCX: 0000000000000007 DX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8e10b14b BP: ffffffff8e108476 R08: 0000000000000000 R09: 0000000000000001 10: 0000000000000000 R11: ffffacc1039df9e5 R12: 000000009552b900 13: 000000009319c130 R14: ffff9ba39319c100 R15: 0000000000000246 S: 00007f96b2bfc4c0(0000) GS:ffff9ba39f340000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 R2: 0000000000401870 CR3: 00000007db7a4000 CR4: 00000000000006e0 all Trace: __invalid_creds+0x48/0x4a __io_req_aux_free+0x2e8/0x3b0 ? io_poll_remove_one+0x2a/0x1d0 __io_free_req+0x18/0x200 io_free_req+0x31/0x350 io_poll_remove_one+0x17f/0x1d0 io_poll_cancel.isra.80+0x6c/0x80 io_async_find_and_cancel+0x111/0x120 io_issue_sqe+0x181/0x10e0 ? __lock_acquire+0x552/0xae0 ? lock_acquire+0x8e/0x310 ? fs_reclaim_acquire.part.97+0x5/0x30 __io_queue_sqe.part.100+0xc4/0x580 ? io_submit_sqes+0x751/0xbd0 ? rcu_read_lock_sched_held+0x32/0x40 io_submit_sqes+0x9ba/0xbd0 ? __x64_sys_io_uring_enter+0x2b2/0x460 ? __x64_sys_io_uring_enter+0xaf/0x460 ? find_held_lock+0x2d/0x90 ? __x64_sys_io_uring_enter+0x111/0x460 __x64_sys_io_uring_enter+0x2d7/0x460 do_syscall_64+0x5a/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xb3 After looking into codes, it turns out that this issue is because we didn't restore the req->work, which is changed in io_arm_poll_handler(), req->work is a union with below struct: struct { struct callback_head task_work; struct hlist_node hash_node; struct async_poll *apoll; }; If we forget to restore, members in struct io_wq_work would be invalid, restore the req->work to fix this issue. Signed-off-by: Xiaoguang Wang <[email protected]> Get rid of not needed 'need_restore' variable. Signed-off-by: Jens Axboe <[email protected]>
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
[ Upstream commit 7ffa8b7 ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7ffa8b7 ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7ffa8b7 ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7ffa8b7 ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7ffa8b7 ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ torvalds#318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]>
…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
binder: Reject transactions containig FDs when they're not allowed.
…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 linux-sunxi#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Reported by checkpatch: security/selinux/nlmsgtab.c --------------------------- ERROR: that open brace { should be on the previous line torvalds#29: FILE: security/selinux/nlmsgtab.c:29: +static const struct nlmsg_perm nlmsg_route_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#97: FILE: security/selinux/nlmsgtab.c:97: +static const struct nlmsg_perm nlmsg_tcpdiag_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#105: FILE: security/selinux/nlmsgtab.c:105: +static const struct nlmsg_perm nlmsg_xfrm_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#134: FILE: security/selinux/nlmsgtab.c:134: +static const struct nlmsg_perm nlmsg_audit_perms[] = +{ security/selinux/ss/policydb.c ------------------------------ ERROR: that open brace { should be on the previous line torvalds#318: FILE: security/selinux/ss/policydb.c:318: +static int (*destroy_f[SYM_NUM]) (void *key, void *datum, void *datap) = +{ ERROR: that open brace { should be on the previous line torvalds#674: FILE: security/selinux/ss/policydb.c:674: +static int (*index_f[SYM_NUM]) (void *key, void *datum, void *datap) = +{ ERROR: that open brace { should be on the previous line #1643: FILE: security/selinux/ss/policydb.c:1643: +static int (*read_f[SYM_NUM]) (struct policydb *p, struct symtab *s, void *fp) = +{ ERROR: that open brace { should be on the previous line #3246: FILE: security/selinux/ss/policydb.c:3246: + void *datap) = +{ Signed-off-by: Christian Göttsche <[email protected]>
Reported by checkpatch: security/selinux/nlmsgtab.c --------------------------- ERROR: that open brace { should be on the previous line torvalds#29: FILE: security/selinux/nlmsgtab.c:29: +static const struct nlmsg_perm nlmsg_route_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#97: FILE: security/selinux/nlmsgtab.c:97: +static const struct nlmsg_perm nlmsg_tcpdiag_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#105: FILE: security/selinux/nlmsgtab.c:105: +static const struct nlmsg_perm nlmsg_xfrm_perms[] = +{ ERROR: that open brace { should be on the previous line torvalds#134: FILE: security/selinux/nlmsgtab.c:134: +static const struct nlmsg_perm nlmsg_audit_perms[] = +{ security/selinux/ss/policydb.c ------------------------------ ERROR: that open brace { should be on the previous line torvalds#318: FILE: security/selinux/ss/policydb.c:318: +static int (*destroy_f[SYM_NUM]) (void *key, void *datum, void *datap) = +{ ERROR: that open brace { should be on the previous line torvalds#674: FILE: security/selinux/ss/policydb.c:674: +static int (*index_f[SYM_NUM]) (void *key, void *datum, void *datap) = +{ ERROR: that open brace { should be on the previous line #1643: FILE: security/selinux/ss/policydb.c:1643: +static int (*read_f[SYM_NUM]) (struct policydb *p, struct symtab *s, void *fp) = +{ ERROR: that open brace { should be on the previous line #3246: FILE: security/selinux/ss/policydb.c:3246: + void *datap) = +{ Signed-off-by: Christian Göttsche <[email protected]> Signed-off-by: Paul Moore <[email protected]>
Add unit tests for new ldsx insns. The test includes sign-extension with a single value or with a value range. If cpuv4 is not supported due to (1) older compiler, e.g., less than clang version 18, or (2) test runner test_progs and test_progs-no_alu32 which tests cpu v2 and v3, or (3) non-x86_64 arch not supporting new insns in jit yet, a dummy program is added with below output: torvalds#318/1 verifier_ldsx/cpuv4 is not supported by compiler or jit, use a dummy test:OK torvalds#318 verifier_ldsx:OK to indicate the test passed with a dummy test instead of actually testing cpuv4. I am using a dummy prog to avoid changing the verifier testing infrastructure. Once clang 18 is widely available and other architectures support cpuv4, at least for CI run, the dummy program can be removed. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2065400 [ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
Someone accidentally hit M I think