Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/networking/switchdev.txt

@@ -228,7 +228,7 @@ Learning on the device port should be enabled, as well as learning_sync:
 	bridge link set dev DEV learning on self
 	bridge link set dev DEV learning_sync on self
 
-Learning_sync attribute enables syncing of the learned/forgotton FDB entry to
+Learning_sync attribute enables syncing of the learned/forgotten FDB entry to
 the bridge's FDB.  It's possible, but not optimal, to enable learning on the
 device port and on the bridge port, and disable learning_sync.
 
@@ -245,7 +245,7 @@ the responsibility of the port driver/device to age out these entries.  If the
 port device supports ageing, when the FDB entry expires, it will notify the
 driver which in turn will notify the bridge with SWITCHDEV_FDB_DEL.  If the
 device does not support ageing, the driver can simulate ageing using a
-garbage collection timer to monitor FBD entries.  Expired entries will be
+garbage collection timer to monitor FDB entries.  Expired entries will be
 notified to the bridge using SWITCHDEV_FDB_DEL.  See rocker driver for
 example of driver running ageing timer.
 

Documentation/printk-formats.txt

@@ -58,20 +58,23 @@ Symbols/Function Pointers
 	%ps	versatile_init
 	%pB	prev_fn_of_versatile_init+0x88/0x88
 
-For printing symbols and function pointers. The ``S`` and ``s`` specifiers
-result in the symbol name with (``S``) or without (``s``) offsets. Where
-this is used on a kernel without KALLSYMS - the symbol address is
-printed instead.
+The ``F`` and ``f`` specifiers are for printing function pointers,
+for example, f->func, &gettimeofday. They have the same result as
+``S`` and ``s`` specifiers. But they do an extra conversion on
+ia64, ppc64 and parisc64 architectures where the function pointers
+are actually function descriptors.
+
+The ``S`` and ``s`` specifiers can be used for printing symbols
+from direct addresses, for example, __builtin_return_address(0),
+(void *)regs->ip. They result in the symbol name with (``S``) or
+without (``s``) offsets. If KALLSYMS are disabled then the symbol
+address is printed instead.
 
 The ``B`` specifier results in the symbol name with offsets and should be
 used when printing stack backtraces. The specifier takes into
 consideration the effect of compiler optimisations which may occur
 when tail-call``s are used and marked with the noreturn GCC attribute.
 
-On ia64, ppc64 and parisc64 architectures function pointers are
-actually function descriptors which must first be resolved. The ``F`` and
-``f`` specifiers perform this resolution and then provide the same
-functionality as the ``S`` and ``s`` specifiers.
 
 Kernel Pointers
 ===============

Documentation/sysctl/net.txt

@@ -35,9 +35,34 @@ Table : Subdirectories in /proc/sys/net
 bpf_jit_enable
 --------------
 
-This enables Berkeley Packet Filter Just in Time compiler.
-Currently supported on x86_64 architecture, bpf_jit provides a framework
-to speed packet filtering, the one used by tcpdump/libpcap for example.
+This enables the BPF Just in Time (JIT) compiler. BPF is a flexible
+and efficient infrastructure allowing to execute bytecode at various
+hook points. It is used in a number of Linux kernel subsystems such
+as networking (e.g. XDP, tc), tracing (e.g. kprobes, uprobes, tracepoints)
+and security (e.g. seccomp). LLVM has a BPF back end that can compile
+restricted C into a sequence of BPF instructions. After program load
+through bpf(2) and passing a verifier in the kernel, a JIT will then
+translate these BPF proglets into native CPU instructions. There are
+two flavors of JITs, the newer eBPF JIT currently supported on:
+  - x86_64
+  - arm64
+  - ppc64
+  - sparc64
+  - mips64
+  - s390x
+
+And the older cBPF JIT supported on the following archs:
+  - arm
+  - mips
+  - ppc
+  - sparc
+
+eBPF JITs are a superset of cBPF JITs, meaning the kernel will
+migrate cBPF instructions into eBPF instructions and then JIT
+compile them transparently. Older cBPF JITs can only translate
+tcpdump filters, seccomp rules, etc, but not mentioned eBPF
+programs loaded through bpf(2).
+
 Values :
 	0 - disable the JIT (default value)
 	1 - enable the JIT
@@ -46,9 +71,9 @@ Values :
 bpf_jit_harden
 --------------
 
-This enables hardening for the Berkeley Packet Filter Just in Time compiler.
-Supported are eBPF JIT backends. Enabling hardening trades off performance,
-but can mitigate JIT spraying.
+This enables hardening for the BPF JIT compiler. Supported are eBPF
+JIT backends. Enabling hardening trades off performance, but can
+mitigate JIT spraying.
 Values :
 	0 - disable JIT hardening (default value)
 	1 - enable JIT hardening for unprivileged users only
@@ -57,11 +82,11 @@ Values :
 bpf_jit_kallsyms
 ----------------
 
-When Berkeley Packet Filter Just in Time compiler is enabled, then compiled
-images are unknown addresses to the kernel, meaning they neither show up in
-traces nor in /proc/kallsyms. This enables export of these addresses, which
-can be used for debugging/tracing. If bpf_jit_harden is enabled, this feature
-is disabled.
+When BPF JIT compiler is enabled, then compiled images are unknown
+addresses to the kernel, meaning they neither show up in traces nor
+in /proc/kallsyms. This enables export of these addresses, which can
+be used for debugging/tracing. If bpf_jit_harden is enabled, this
+feature is disabled.
 Values :
 	0 - disable JIT kallsyms export (default value)
 	1 - enable JIT kallsyms export for privileged users only

MAINTAINERS

@@ -7120,7 +7120,6 @@ M:	Marc Zyngier <[email protected]>
 L:	[email protected]
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
-T:	git git://git.infradead.org/users/jcooper/linux.git irqchip/core
 F:	Documentation/devicetree/bindings/interrupt-controller/
 F:	drivers/irqchip/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -96,7 +96,6 @@ menu "ARC Architecture Configuration"
 
 menu "ARC Platform/SoC/Board"
 
-source "arch/arc/plat-sim/Kconfig"
 source "arch/arc/plat-tb10x/Kconfig"
 source "arch/arc/plat-axs10x/Kconfig"
 #New platform adds here

arch/arc/Makefile

@@ -107,7 +107,7 @@ core-y		+= arch/arc/
 # w/o this dtb won't embed into kernel binary
 core-y		+= arch/arc/boot/dts/
 
-core-$(CONFIG_ARC_PLAT_SIM)	+= arch/arc/plat-sim/
+core-y				+= arch/arc/plat-sim/
 core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
 core-$(CONFIG_ARC_PLAT_EZNPS)	+= arch/arc/plat-eznps/

arch/arc/boot/dts/axc001.dtsi

@@ -15,15 +15,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -91,23 +91,21 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
 		interrupts = < 7 >;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x20000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x1b000000>;	/* (512 - 32) MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x1b000000>;	/* (512 - 32) MiB */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * We just move frame buffer area to the very end of
@@ -118,7 +116,7 @@
 		 */
 		frame_buffer: frame_buffer@9e000000 {
 			compatible = "shared-dma-pool";
-			reg = <0x9e000000 0x2000000>;
+			reg = <0x0 0x9e000000 0x0 0x2000000>;
 			no-map;
 		};
 	};

arch/arc/boot/dts/axc003.dtsi

@@ -14,15 +14,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -94,30 +94,29 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&core_intc>;
 		interrupts = < 24 >;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x40000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";
-			reg = <0xbe000000 0x2000000>;
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
 			no-map;
 		};
 	};

arch/arc/boot/dts/axc003_idu.dtsi

@@ -14,15 +14,15 @@
 
 / {
 	compatible = "snps,arc";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpu_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -100,30 +100,29 @@
 	mb_intc: dw-apb-ictl@0xe0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
 		interrupt-controller;
 		interrupt-parent = <&idu_intc>;
 		interrupts = <0>;
 	};
 
 	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x40000000>;
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512MiB */
+		/* CONFIG_KERNEL_RAM_BASE_ADDRESS needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		/*
 		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";
-			reg = <0xbe000000 0x2000000>;
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
 			no-map;
 		};
 	};

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -13,7 +13,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00000000 0xe0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
 		interrupt-parent = <&mb_intc>;
 
 		i2sclk: i2sclk@100a0 {

arch/arc/configs/haps_hs_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_PREEMPT=y

arch/arc/configs/haps_hs_smp_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"

arch/arc/configs/nps_defconfig

@@ -39,7 +39,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set

arch/arc/configs/nsim_700_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set

arch/arc/configs/nsim_hs_defconfig

@@ -26,7 +26,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
 CONFIG_PREEMPT=y

arch/arc/configs/nsim_hs_smp_defconfig

@@ -24,7 +24,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"

arch/arc/configs/nsimosci_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/arc/configs/nsimosci_hs_defconfig

@@ -23,7 +23,6 @@ CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set