Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
net, bonding: Add XDP support to the bonding driver
XDP is implemented in the bonding driver by transparently delegating the XDP program loading, removal and xmit operations to the bonding slave devices. The overall goal of this work is that XDP programs can be attached to a bond device *without* any further changes (or awareness) necessary to the program itself, meaning the same XDP program can be attached to a native device but also a bonding device. Semantics of XDP_TX when attached to a bond are equivalent in such setting to the case when a tc/BPF program would be attached to the bond, meaning transmitting the packet out of the bond itself using one of the bond's configured xmit methods to select a slave device (rather than XDP_TX on the slave itself). Handling of XDP_TX to transmit using the configured bonding mechanism is therefore implemented by rewriting the BPF program return value in bpf_prog_run_xdp. To avoid performance impact this check is guarded by a static key, which is incremented when a XDP program is loaded onto a bond device. This approach was chosen to avoid changes to drivers implementing XDP. If the slave device does not match the receive device, then XDP_REDIRECT is transparently used to perform the redirection in order to have the network driver release the packet from its RX ring. The bonding driver hashing functions have been refactored to allow reuse with xdp_buff's to avoid code duplication. The motivation for this change is to enable use of bonding (and 802.3ad) in hairpinning L4 load-balancers such as [1] implemented with XDP and also to transparently support bond devices for projects that use XDP given most modern NICs have dual port adapters. An alternative to this approach would be to implement 802.3ad in user-space and implement the bonding load-balancing in the XDP program itself, but is rather a cumbersome endeavor in terms of slave device management (e.g. by watching netlink) and requires separate programs for native vs bond cases for the orchestrator. A native in-kernel implementation overcomes these issues and provides more flexibility. Below are benchmark results done on two machines with 100Gbit Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and 16-core 3950X on receiving machine. 64 byte packets were sent with pktgen-dpdk at full rate. Two issues [2, 3] were identified with the ice driver, so the tests were performed with iommu=off and patch [2] applied. Additionally the bonding round robin algorithm was modified to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate of cache misses were caused by the shared rr_tx_counter (see patch 2/3). The statistics were collected using "sar -n dev -u 1 10". On top of that, for ice, further work is in progress on improving the XDP_TX numbers [4]. -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 3.15% 48.6Mpps XDP_TX: 3.12% 18.3Mpps 18.3Mpps XDP_DROP (RSS): 9.47% 116.5Mpps XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 3.14% 46.7Mpps XDP_TX: 3.15% 13.9Mpps 13.9Mpps XDP_DROP (RSS): 10.33% 117.2Mpps XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 6.27% 92.7Mpps XDP_TX: 6.26% 17.6Mpps 17.5Mpps XDP_DROP (RSS): 11.38% 117.2Mpps XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps -------------------------------------------------------------- RSS: Receive Side Scaling, e.g. the packets were sent to a range of destination IPs. [1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb [2]: https://lore.kernel.org/bpf/[email protected]/T/#t [3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/ [4]: https://lore.kernel.org/bpf/[email protected]/T/#t Signed-off-by: Jussi Maki <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Cc: Jay Vosburgh <[email protected]> Cc: Veaceslav Falico <[email protected]> Cc: Andy Gospodarek <[email protected]> Cc: Maciej Fijalkowski <[email protected]> Cc: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
- Loading branch information