EPS32 dev board for WLED project and many more

This Python script was created for the purpose to control a PWM FAN Noctua NF-A4x20 5V, using Raspberry Pi 4B hardware features. The script use WiringPi-Python as a dependecy, it is used to set Hardware PWM value clock as 25Khz that was specified by Intel (c.f. “4-Wire Pulse Width Modulation (PWM) Controlled Fans”, Intel Corporation September 20…

Arduino Nano based PC PWM fan controller. Up to 3 fans.

4-Wire PWM fan control using Arduino ATmega328P and ATtiny85

A simple PWM fan controller for Orange Pi boards

A small server that can control a fan on a Raspberry Pi 4 based on CPU temperature.

A simple Python script than when run on a Raspberry Pi Compute module 4 will use a fan curve to control a pwm fan.

This contains details about a mini-project temperature-controlled fan, using 8051 Micro Controller along with some additional electronic components like LM35 (temperature sensor), ADC0804, Motor Driver, and a DC Motor to replicate a fan. The simulations have been done in Proteus Simulation Software. The project report contains a detailed descrip…

How to control a PWM fan depending on CPU temperature on a Orange Pi Zero2

small esp32-c3 based pwm fan controller which powers from usb

Arduino Rack Temperature Controller

Adapter PCB board for easily testing PC (PWM) fans.

ESP32 10 Channel PWM Fan Controller

PlatformIO project. Regulation of 12V DC fans based on DS18B20 temperature sensors. Designated for effective heat dissipation of typical heater.

A simple PWM-based driver for your Raspberry Pi Fan

A C# program to control your computer fan and water pump speed (Hardware) by sending PWM signal, and bypass the UAC prompts.

PWM fan speed control for Radxa Rock5b 25W POE hat

Raspberry Pi hardware PWM fan CPU control

Shell script for enabling PWM fan control on FriendlyElec (NanoPi) SBCs.

How to control a PWM fan depending on CPU temperature on a Orange Pi Zero (H2+ / H3)