This repo is no longer maintained. Haproxy-rest is surpassed by Vamp Router
HAproxy-rest started as a REST interface for HAproxy. Now it's much more. Features are:
- Update the config through REST or through Zookeeper
- Run in full load balancer mode, or simple local proxy mode
- Adjust server weight
- Get statistics on frontends, backends and servers
- Stream statistics to Kafka
- Set ACL's (experimental)
- Set HTTP & TCP Spike limiting (experimental)
Important : Currently, HAproxy-rest does NOT check validity of the HAproxy command, ACLs and configs submitted to it. Submitting a config where a frontend references a non-existing backend will be accepted by the REST api but crash HAproxy.
Start up an instance with all defaults and bind it to the local network interface
$ docker run --net=host tnolet/haproxy-rest
2014-11-20 21:04:31 INFO ==> Starting in Load Balancer mode <==
2014-11-20 21:04:31 WARN Unable to load persistent config from disk
2014-11-20 21:04:31 WARN Loading example config
2014-11-20 21:04:31 INFO Pid file exists, proceeding with startup...
2014-11-20 21:04:31 INFO HaproxyReload: 30300
2014-11-20 21:04:31 INFO Starting REST server
[GIN-debug] POST /v1/backend/:name/servers/:server/weight/:weight --> main.func·003 (4 handlers)
[GIN-debug] POST /v1/frontend/:name/acls/:acl/:pattern --> main.func·004 (4 handlers)
[GIN-debug] GET /v1/frontend/:name/acls --> main.func·005 (4 handlers)
[GIN-debug] GET /v1/stats --> main.func·006 (4 handlers)
[GIN-debug] GET /v1/stats/backend --> main.func·007 (4 handlers)
[GIN-debug] GET /v1/stats/frontend --> main.func·008 (4 handlers)
[GIN-debug] GET /v1/stats/server --> main.func·009 (4 handlers)
[GIN-debug] GET /v1/config --> main.func·010 (4 handlers)
[GIN-debug] POST /v1/config --> main.func·011 (4 handlers)
[GIN-debug] GET /v1/info --> main.func·012 (4 handlers)
[GIN-debug] Listening and serving HTTP on 0.0.0.0:10001
The default ports are:
10001 REST Api (for config, stats etc)
1988 built-in Haproxy stats
You could change the REST api port by adding the -port flag
$ docker run --net=host tnolet/haproxy-rest -port=1234
Or by exporting an environment variable PORT0. When deploying with Marathon 0.7.0, this is done automatically
$ export PORT0=12345
$ docker run --net=host tnolet/haproxy-rest
Statistics are published in two different ways: straight from the REST interface and as Kafka topics
Grab some stats from the /stats endpoint. Notice the IP address. This is boot2docker's address on my Macbook. I'm using httpie instead of curl.
$ http http://192.168.59.103:10001/v1/stats
HTTP/1.1 200 OK
[
{
"act": "",
"bck": "",
"bin": "3572",
"bout": "145426",
"check_code": "",
"check_duration": "",
"check_status": "",
"chkdown": "",
"chkfail": "",
"cli_abrt": "",
...
Valid endpoints are stats/frontend, stats/backend and stats/server. The /stats endpoint gives you all of them
in one go.
Statistics are also published as Kafka topics. Configure a Kafka endpoint using the -kakfaHost and -kafkaPort flags.
Stats are published as the following topic:
- loadbalancer.all
The messages on that topic are json strings, where the "name" key indicates what metric type from which proxy you are dealing with, i.e.:
{
"name": "testbe.test_be_1.rate", # The rate for server test_be_1 for proxy testbe
"value": "2", # The value of the metric
"timestamp": 1413546338 # The timestamp in Unix epoch
}
{
"name": "testbe.test_be_1.rate_lim",
"value": "12",
"timestamp": 1413546338
}
{ "name": "testbe.test_be_1.rate_max",
"value": "30",
"timestamp": 1413546338
}
Note: currently, not all Haproxy metric types are sent to Kafka. At this moment, the list is hardcoded as a wantedMetrics slice:
wantedMetrics := []string{ "Scur", "Qcur","Smax","Slim","Weight","Qtime","Ctime","Rtime","Ttime","Req_rate","Req_rate_max","Req_tot","Rate","Rate_lim","Rate_max" }
For an explanation of the metric types, please read this
Post a configuration. You can use the example file resources/config_example.json
$ http POST http://192.168.59.103:10001/v1/config < resources/config_example.json
HTTP/1.1 200 OK
Ok
Update the weight of some backend server
$ http POST http://192.168.59.103:10001/v1/backend/testbe/servers/test_be_1/weight/20
HTTP/1.1 200 OK
Ok
At magnetic.io, we use Haproxy-rest running in local proxy mode for simple service discovery.
When you start HAproxy-rest with -mode=localproxy, only very simple binds are set up between two host:port pairs.
No frontends, no backends, no ACL's, no nothing.
Note: local proxy mode requires a Zookeeper ensemble to function: local proxy only gets its config from a Zookeeper node.
Haproxy-rest will watch for changes to the key: /magnetic/localproxy. You can set your own namespace using the -zooConKey flag. The /localproxy part is hardcoded.
To this node you need to publish a full configuration in JSON format. Starting up a localproxy using Zookeeper
looks like this:
-mode=localproxy -zooConString=10.161.63.88:2181,10.189.106.106:2181,10.5.99.23:2181
This will result in config similar to the following JSON. Notice the frontends and backends are empty.
There is just a simple array of services that bind a port to an endpoint.
{
frontends: [ ],
backends: [ ],
services: [
{
name: "vrn-development-service-4d7a24cd",
bindPort: 22500,
endPoint: "10.224.236.38",
mode: "tcp"
}
]
}
The frontend is the basic listening port or unix socket. Here's an example of a basic HTTP frontend:
{
"name" : "test_fe_1",
"bindPort" : 8000,
"bindIp" : "0.0.0.0",
"defaultBackend" : "testbe1",
"mode" : "http",
"options" : {
"httpClose" : true
}
You can also setup the frontend to listen on Unix sockets. Note: you have to explicitly declare the protocol
coming over the socket. On this example we declare the Haproxy specific proxy protocol.
{
"name" : "test_fe_1",
"mode" : "http",
"defaultBackend" : "testbe2",
"unixSock" : "/tmp/vamp_testbe2_1.sock",
"sockProtocol" : "accept-proxy"
}
You can set ACLs as part of a frontend's configuration and use these ACLs to route traffic to different backends. The example below will route all Internet Explorer users to a different backend. You can update this on the fly without loosing sessions or causing errors due to Haproxy's smart restart mechanisms.
{
"frontends" : [
{
"name" : "test_fe_1", # declare a frontend
... # some stuff left out for brevity
"acls" : [
{
"name" : "uses_msie", # set an ACL by giving it a name and some pattern.
"backend" : "testbe2", # set the backend to send traffic to
"pattern" : "hdr_sub(user-agent) MSIE" # This pattern matches all HTTP requests that have
} # "MSIE" in their User-Agent header
]
}
]
}
You can set limits on specific connection rates for HTTP and TCP traffic. This comes in handy if you want to protect
yourself from abusive users or other spikes. The rates are calculated over a specific time range. The example below
tracks the TCP connection rate over 30 seconds. If more than 200 new connections are made in this time period, the
client receives an 503 error and goes into a "cooldown" period for 60 seconds (expiryTime)
{
"frontends" : [
{
"name" : "test_fe_1",
...
"httpSpikeLimit" : {
"sampleTime" : "30s",
"expiryTime" : "60s",
"rate" : 50
},
"tcpSpikeLimit" : {
"sampleTime" : "30s",
"expiryTime" : "60s",
"rate" : 200
}
}
Note: the time format used, i.e. 30s, is the default Haproxy time format. More details here
More info to follow. Note: You can point servers to standard IP + port pairs or to Unix sockets. Here are some examples:
{ "backends" : [
{
"name" : "testbe1",
"mode" : "http",
"servers" : [
{
"name" : "test_be1_1",
"host" : "192.168.59.103",
"port" : 8081,
"weight" : 100,
"maxconn" : 1000,
"check" : false,
"checkInterval" : 10
},
{
"name" : "test_be1_2",
"host" : "192.168.59.103",
"port" : 8082,
"weight" : 100,
"maxconn" : 1000,
"check" : false,
"checkInterval" : 10
}
],
"proxyMode" : false
}
]
}
And with proxy mode set to true:
{
"backends" :
[
{
"name" : "testbe2",
"mode" : "http",
"servers" : [
{
"name" : "test_be2_1",
"unixSock" : "/tmp/vamp_testbe2_1.sock",
"weight" : 100
}
],
"proxyMode" : true,
"options" : {}
}
]
}
-binary="/usr/local/bin/haproxy" Path to the HAproxy binary
-kafkaHost="localhost" The hostname or ip address of the Kafka host
-kafkaPort=9092 The port of the Kafka host
-kafkaSwitch="off" Switch whether to enable Kafka streaming
-lbConfigFile="resources/haproxy_new.cfg" Location of the target HAproxy config file
-lbTemplate="resources/haproxy_cfg.template" Template file to build HAproxy load balancer config
-mode="loadbalancer" Switch for "loadbalancer" or "localproxy" mode
-pidFile="resources/haproxy-private.pid" Location of the HAproxy PID file
-port=10001 Port/IP to use for the REST interface. Overrides $PORT0 env variable
-proxyConfigFile="resources/haproxy_localproxy_new.cfg" Location of the target HAproxy localproxy config
-proxyTemplate="resources/haproxy_localproxy_cfg.template" Template file to build HAproxy local proxy config
-zooConKey="magnetic" Zookeeper root key
-zooConString="localhost" A zookeeper ensemble connection string
for example, this would start up haproxy-rest on port 12345
$ ./haproxy-rest -port=12345
and this would start up haproxy-rest with kafka streaming enabled
$ ./haproxy-rest -mode=loadbalancer -kafkaSwitch=on -kafkaHost=10.161.63.88
Install HAproxy 1.5 or greater in whatever way you like. Just make sure the haproxy executable is in your PATH. For Ubuntu, use:
$ add-apt-repository ppa:vbernat/haproxy-1.5 -y
$ apt-get update -y
$ apt-get install -y haproxy
Clone this repo
git clone https://github.com/tnolet/haproxy-rest
CD into the directory just created and startup haproxy
OSX:
$ cd haproxy-rest
$ haproxy -f resources/haproxy_init.cfg -p resources/haproxy-private.pid -st $(<resources/haproxy-private.pid)
Ubuntu
$ cd haproxy-rest
$ haproxy -f resources/haproxy_init.cfg -p resources/haproxy-private.pid -sf $(cat resources/haproxy-private.pid)
Build the program and run it.
$ go build
$ ./haproxy-rest
If you're on Mac OSX or Windows and want to compile for Linux (which is probably the OS
you're using to run HAproxy), you need to cross compile.
For this, go to your Go src directory, i.e.
$ cd /usr/local/Cellar/go/1.3.1
Compile the compiler with the correct arguments for OS and ARC
$ GOOS=linux GOARCH=386 CGO_ENABLED=0 ./make.bash --no-clean
Compile the application
$ GOOS=windows GOARCH=386 go build
Part of Haproxy-rest is inspired by haproxy-config and consul-haproxy. It is not a straight fork or clone of either of these, but parts are borrowed.