🚨 These tags are no longer supported or maintained, they are removed from the GitHub repository, but the last versions pushed might still be available in Docker Hub if anyone has been pulling them:
python3.9-alpine3.13
python3.8-alpine3.11
python3.7-alpine3.8
python3.6
python3.6-alpine3.8
python2.7
The last date tags for these versions are:
python3.9-alpine3.13-2024-03-11
python3.8-alpine3.11-2024-03-11
python3.7-alpine3.8-2024-03-11
python3.6-2022-11-25
python3.6-alpine3.8-2022-11-25
python2.7-2022-11-25
Note: There are tags for each build date. If you need to "pin" the Docker image version you use, you can select one of those tags. E.g. tiangolo/meinheld-gunicorn-flask:python3.7-2019-10-15
.
Docker image with Meinheld managed by Gunicorn for high-performance web applications in Flask using Python with performance auto-tuning.
GitHub repo: https://github.com/tiangolo/meinheld-gunicorn-flask-docker
Docker Hub image: https://hub.docker.com/r/tiangolo/meinheld-gunicorn-flask/
Python Flask web applications running with Meinheld controlled by Gunicorn have some of the best performances achievable by Flask (*).
If you have an already existing application in Flask or are building a new one, this image will give you the best performance possible (or close to that).
This image has an "auto-tuning" mechanism included, so that you can just add your code and get good performance automatically. And without making sacrifices (like logging).
The current latest version of Meinheld released is 1.0.2, from May 17, 2020. This version of Meinheld requires an old version of Greenlet (>=0.4.5,<0.5
) that is not compatible with Python 3.10 and 3.11. That's why the latest version of Python supported in this image is Python 3.9.
If you are starting a new project, you might benefit from a newer and faster framework like FastAPI (based on ASGI instead of WSGI like Flask and Django), and a Docker image like tiangolo/uvicorn-gunicorn-fastapi.
It would give you about 200% the performance achievable with Flask, even when using this image.
Also, if you want to use new technologies like WebSockets it would be easier with a newer framework based on ASGI, like FastAPI. As the standard ASGI was designed to be able to handle asynchronous code like the one needed for WebSockets.
Meinheld is a high-performance WSGI-compliant web server.
You can use Gunicorn to manage Meinheld and run multiple processes of it.
Flask is a microframework for Python based on Werkzeug, Jinja 2 and good intentions.
This image was created to be an alternative to tiangolo/uwsgi-nginx-flask, providing about 400% the performance of that image.
It is based on the more generic image tiangolo/meinheld-gunicorn. That's the one you would use for other WSGI frameworks, like Django.
You are probably using Kubernetes or similar tools. In that case, you probably don't need this image (or any other similar base image). You are probably better off building a Docker image from scratch.
If you have a cluster of machines with Kubernetes, Docker Swarm Mode, Nomad, or other similar complex system to manage distributed containers on multiple machines, then you will probably want to handle replication at the cluster level instead of using a process manager in each container that starts multiple worker processes, which is what this Docker image does.
In those cases (e.g. using Kubernetes) you would probably want to build a Docker image from scratch, installing your dependencies, and running a single process instead of this image.
For example, using Gunicorn you could have a file app/gunicorn_conf.py
with:
# Gunicorn config variables
loglevel = "info"
errorlog = "-" # stderr
accesslog = "-" # stdout
worker_tmp_dir = "/dev/shm"
graceful_timeout = 120
timeout = 120
keepalive = 5
threads = 3
And then you could have a Dockerfile
with:
FROM python:3.9
WORKDIR /code
COPY ./requirements.txt /code/requirements.txt
RUN pip install --no-cache-dir --upgrade -r /code/requirements.txt
COPY ./app /code/app
CMD ["gunicorn", "--conf", "app/gunicorn_conf.py", "--bind", "0.0.0.0:80", "app.main:app"]
You can read more about these ideas in the FastAPI documentation about: FastAPI in Containers - Docker as the same ideas would apply to other web applications in containers.
You could want a process manager running multiple worker processes in the container if your application is simple enough that you don't need (at least not yet) to fine-tune the number of processes too much, and you can just use an automated default, and you are running it on a single server, not a cluster.
You could be deploying to a single server (not a cluster) with Docker Compose, so you wouldn't have an easy way to manage replication of containers (with Docker Compose) while preserving the shared network and load balancing.
Then you could want to have a single container with a process manager starting several worker processes inside, as this Docker image does.
You could also have other reasons that would make it easier to have a single container with multiple processes instead of having multiple containers with a single process in each of them.
For example (depending on your setup) you could have some tool like a Prometheus exporter in the same container that should have access to each of the requests that come.
In this case, if you had multiple containers, by default, when Prometheus came to read the metrics, it would get the ones for a single container each time (for the container that handled that particular request), instead of getting the accumulated metrics for all the replicated containers.
Then, in that case, it could be simpler to have one container with multiple processes, and a local tool (e.g. a Prometheus exporter) on the same container collecting Prometheus metrics for all the internal processes and exposing those metrics on that single container.
Read more about it all in the FastAPI documentation about: FastAPI in Containers - Docker, as the same concepts apply to other web applications in containers.
You don't have to clone this repo.
You can use this image as a base image for other images.
Assuming you have a file requirements.txt
, you could have a Dockerfile
like this:
FROM tiangolo/meinheld-gunicorn-flask:python3.9
COPY ./requirements.txt /app/requirements.txt
RUN pip install --no-cache-dir --upgrade -r /app/requirements.txt
COPY ./app /app
It will expect a file at /app/app/main.py
.
Or otherwise a file at /app/main.py
.
And will expect it to contain a variable app
with your "WSGI" application.
Then you can build your image from the directory that has your Dockerfile
, e.g:
docker build -t myimage ./
These are the environment variables that you can set in the container to configure it and their default values:
The Python "module" (file) to be imported by Gunicorn, this module would contain the actual Flask application in a variable.
By default:
app.main
if there's a file/app/app/main.py
ormain
if there's a file/app/main.py
For example, if your main file was at /app/custom_app/custom_main.py
, you could set it like:
docker run -d -p 80:80 -e MODULE_NAME="custom_app.custom_main" myimage
The variable inside of the Python module that contains the Flask application.
By default:
app
For example, if your main Python file has something like:
from flask import Flask
api = Flask(__name__)
@api.route("/")
def hello():
return "Hello World from Flask"
In this case api
would be the variable with the "Flask application". You could set it like:
docker run -d -p 80:80 -e VARIABLE_NAME="api" myimage
The string with the Python module and the variable name passed to Gunicorn.
By default, set based on the variables MODULE_NAME
and VARIABLE_NAME
:
app.main:app
ormain:app
You can set it like:
docker run -d -p 80:80 -e APP_MODULE="custom_app.custom_main:api" myimage
The path to a Gunicorn Python configuration file.
By default:
/app/gunicorn_conf.py
if it exists/app/app/gunicorn_conf.py
if it exists/gunicorn_conf.py
(the included default)
You can set it like:
docker run -d -p 80:80 -e GUNICORN_CONF="/app/custom_gunicorn_conf.py" myimage
This image will check how many CPU cores are available in the current server running your container.
It will set the number of workers to the number of CPU cores multiplied by this value.
By default:
2
You can set it like:
docker run -d -p 80:80 -e WORKERS_PER_CORE="3" myimage
If you used the value 3
in a server with 2 CPU cores, it would run 6 worker processes.
You can use floating point values too.
So, for example, if you have a big server (let's say, with 8 CPU cores) running several applications, and you have an ASGI application that you know won't need high performance. And you don't want to waste server resources. You could make it use 0.5
workers per CPU core. For example:
docker run -d -p 80:80 -e WORKERS_PER_CORE="0.5" myimage
In a server with 8 CPU cores, this would make it start only 4 worker processes.
Override the automatic definition of number of workers.
By default:
- Set to the number of CPU cores in the current server multiplied by the environment variable
WORKERS_PER_CORE
. So, in a server with 2 cores, by default it will be set to4
.
You can set it like:
docker run -d -p 80:80 -e WEB_CONCURRENCY="2" myimage
This would make the image start 2 worker processes, independent of how many CPU cores are available in the server.
The "host" used by Gunicorn, the IP where Gunicorn will listen for requests.
It is the host inside of the container.
So, for example, if you set this variable to 127.0.0.1
, it will only be available inside the container, not in the host running it.
It's is provided for completeness, but you probably shouldn't change it.
By default:
0.0.0.0
The port the container should listen on.
If you are running your container in a restrictive environment that forces you to use some specific port (like 8080
) you can set it with this variable.
By default:
80
You can set it like:
docker run -d -p 80:8080 -e PORT="8080" myimage
The actual host and port passed to Gunicorn.
By default, set based on the variables HOST
and PORT
.
So, if you didn't change anything, it will be set by default to:
0.0.0.0:80
You can set it like:
docker run -d -p 80:8080 -e BIND="0.0.0.0:8080" myimage
The log level for Gunicorn.
One of:
debug
info
warning
error
critical
By default, set to info
.
If you need to squeeze more performance sacrificing logging, set it to warning
, for example:
You can set it like:
docker run -d -p 80:8080 -e LOG_LEVEL="warning" myimage
Logs are sent to the container's stderr
and stdout
, meaning you can view the logs with the docker logs -f your_container_name_here
command.
The image includes a default Gunicorn Python config file at /gunicorn_conf.py
.
It uses the environment variables declared above to set all the configurations.
You can override it by including a file in:
/app/gunicorn_conf.py
/app/app/gunicorn_conf.py
/gunicorn_conf.py
If you need to run anything before starting the app, you can add a file prestart.sh
to the directory /app
. The image will automatically detect and run it before starting everything.
For example, if you want to add Alembic SQL migrations (with SQLALchemy), you could create a ./app/prestart.sh
file in your code directory (that will be copied by your Dockerfile
) with:
#! /usr/bin/env bash
# Let the DB start
sleep 10;
# Run migrations
alembic upgrade head
and it would wait 10 seconds to give the database some time to start and then run that alembic
command.
If you need to run a Python script before starting the app, you could make the /app/prestart.sh
file run your Python script, with something like:
#! /usr/bin/env bash
# Run custom Python script before starting
python /app/my_custom_prestart_script.py
In short: You probably shouldn't use Alpine for Python projects, instead use the slim
Docker image versions.
Do you want more details? Continue reading 👇
Alpine is more useful for other languages where you build a static binary in one Docker image stage (using multi-stage Docker building) and then copy it to a simple Alpine image, and then just execute that binary. For example, using Go.
But for Python, as Alpine doesn't use the standard tooling used for building Python extensions, when installing packages, in many cases Python (pip
) won't find a precompiled installable package (a "wheel") for Alpine. And after debugging lots of strange errors you will realize that you have to install a lot of extra tooling and build a lot of dependencies just to use some of these common Python packages. 😩
This means that, although the original Alpine image might have been small, you end up with a an image with a size comparable to the size you would have gotten if you had just used a standard Python image (based on Debian), or in some cases even larger. 🤯
And in all those cases, it will take much longer to build, consuming much more resources, building dependencies for longer, and also increasing its carbon footprint, as you are using more CPU time and energy for each build. 🌳
If you want slim Python images, you should instead try and use the slim
versions that are still based on Debian, but are smaller. 🤓
All the image tags, configurations, environment variables and application options are tested.
- ⬆ Bump gunicorn from 22.0.0 to 23.0.0. PR #152 by @dependabot[bot].
- ⬆ Bump gunicorn from 20.1.0 to 22.0.0. PR #149 by @dependabot[bot].
- ⬆ Bump docker/build-push-action from 5 to 6. PR #150 by @dependabot[bot].
- 👷 Update
issue-manager.yml
. PR #154 by @tiangolo. - 👷 Update
latest-changes
GitHub Action. PR #153 by @tiangolo. - 👷 Update issue-manager.yml GitHub Action permissions. PR #151 by @tiangolo.
- Bump gunicorn from 20.1.0 to 22.0.0 in /docker-images. PR #148 by @dependabot[bot].
- ⬆ Bump docker/build-push-action from 2 to 5. PR #144 by @dependabot[bot].
- ⬆ Bump docker/setup-buildx-action from 1 to 3. PR #143 by @dependabot[bot].
- ⬆ Bump docker/login-action from 1 to 3. PR #142 by @dependabot[bot].
- ⬆ Bump actions/setup-python from 4 to 5. PR #132 by @dependabot[bot].
- ⬆ Bump peter-evans/dockerhub-description from 3 to 4. PR #130 by @dependabot[bot].
- ⬆️ Update black requirement from ^22.10 to ^23.3. PR #120 by @dependabot[bot].
- 🔧 Add GitHub templates for discussions and issues, and security policy. PR #146 by @alejsdev.
- ⬆ Update mypy requirement from ^0.991 to ^1.4. PR #136 by @dependabot[bot].
- 🔧 Update
latest-changes.yml
. PR #141 by @alejsdev.
- ⬆️ Bump flask from 2.2.2 to 2.2.5 in /docker-images. PR #129 by @dependabot[bot].
- 🐛 Fix latest-changes GitHub Action, take 2. PR #140 by @tiangolo.
- ⬆ Bump tiangolo/issue-manager from 0.4.0 to 0.5.0. PR #131 by @dependabot[bot].
- 👷 Update dependabot. PR #126 by @tiangolo.
- 👷 Update latest-changes GitHub Action. PR #125 by @tiangolo.
- 🐛 Fix latest-changes GitHub Action. PR #139 by @tiangolo.
- 👷 Update token for latest changes. PR #124 by @tiangolo.
- 👷 Add GitHub Action for Docker Hub description. PR #113 by @tiangolo.
Highlights of this release:
-
Support for Python 3.9 and 3.8.
-
Deprecation of Python 3.6 and 2.7.
- The last Python 3.6 and 2.7 images are available in Docker Hub, but they won't be updated or maintained anymore.
- The last images with a date tag are
python3.6-2022-11-25
andpython2.7-2022-11-25
.
-
Upgraded versions of all the dependencies.
-
Small improvements and fixes.
-
✨ Add support for Python 3.9 and Python 3.9 Alpine. PR #50 by @tiangolo.
-
Add Python 3.8 with Alpine 3.11. PR #28.
-
Add support for Python 3.8. PR #27.
- 🔥 Deprecate and remove Python 3.6 and 2.7. PR #105 by @tiangolo.
- 🔥 Remove support for Python 2.7. PR #63 by @tiangolo.
- ⬆️ Bump flask from 2.0.1 to 2.2.2 in /docker-images. PR #98 by @dependabot[bot].
- ⬆️ Upgrade Flask to the latest version supporting Python 3.6. PR #101 by @tiangolo.
- 📝 Add note about Python 3.10 and 3.11. PR #112 by @tiangolo.
- 📝 Add note to discourage Alpine with Python. PR #64 by @tiangolo.
- 📝 Add Kubernetes warning, when to use this image. PR #62 by @tiangolo.
- ✏️ Fix typo duplicate "Note" in Readme. PR #61 by @tiangolo.
- Fix typo in README. PR #18 by @tahmid-choyon.
- ⬆️ Update autoflake requirement from ^1.3.1 to ^2.0.0. PR #110 by @dependabot[bot].
- ⬆️ Update black requirement from ^20.8b1 to ^22.10. PR #109 by @dependabot[bot].
- ⬆️ Update mypy requirement from ^0.971 to ^0.991. PR #108 by @dependabot[bot].
- ⬆️ Update docker requirement from ^5.0.3 to ^6.0.1. PR #107 by @dependabot[bot].
- ⬆️ Upgrade CI OS. PR #111 by @tiangolo.
- 🔧 Update Dependabot config. PR #106 by @tiangolo.
- 👷 Add scheduled CI. PR #104 by @tiangolo.
- 👷 Add alls-green GitHub Action. PR #103 by @tiangolo.
- 👷 Do not run double CI for PRs, run on push only on master. PR #102 by @tiangolo.
- ⬆️ Update black requirement from ^19.10b0 to ^20.8b1. PR #57 by @dependabot[bot].
- ⬆️ Update pytest requirement from ^5.4.1 to ^7.0.1. PR #76 by @dependabot[bot].
- ⬆️ Bump actions/checkout from 2 to 3.1.0. PR #99 by @dependabot[bot].
- ⬆️ Update isort requirement from ^4.3.21 to ^5.8.0. PR #55 by @dependabot[bot].
- ⬆️ Bump tiangolo/issue-manager from 0.2.0 to 0.4.0. PR #52 by @dependabot[bot].
- ⬆️ Update docker requirement from ^4.2.0 to ^5.0.3. PR #66 by @dependabot[bot].
- ⬆️ Bump actions/setup-python from 1 to 4. PR #93 by @dependabot[bot].
- ⬆️ Update mypy requirement from ^0.770 to ^0.971. PR #95 by @dependabot[bot].
- 🔥 Remove Travis backup file. PR #67 by @tiangolo.
- ♻ Refactor dependencies to improve Dependabot updates and reduce disk size used. PR #60 by @tiangolo.
- 👷 Update Latest Changes GitHub Action. PR #59 by @tiangolo.
- 👷 Add Dependabot and external dependencies to get automated upgrade PRs. PR #51 by @tiangolo.
- 🎨 Format GitHub Action latest-changes. PR #42 by @tiangolo.
- 👷 Add GitHub Action latest-changes, update issue-manager, add funding. PR #41 by @tiangolo.
- Refactor build setup:
- Use GitHub actions for CI.
- Simplify, centralize, and deduplicate code and configs.
- Update tests.
- Move from Pipenv to Poetry.
- PR #26.
- Refactor tests to use env vars and add image tags for each build date, like
tiangolo/meinheld-gunicorn-flask:python3.7-2019-10-15
. PR #17.
-
Add support for Python 2.7 (you should use Python 3.7 or Python 3.6). PR #11.
- Add support for
/app/prestart.sh
.
This project is licensed under the terms of the MIT license.