Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v2.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.base.v1.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove_pwms.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/x_grove_testbed/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /__w/bridle/bridle/workspace/zephyr/.cache
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: uartcons
-- Shield(s): seeed_grove_base_v2;grove_btn_d7;grove_led_d6;grove_pwm_led_d6;x_grove_testbed
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_btn/grove_btn_d7.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_pwm_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/x_grove_testbed.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/boards/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.arduino.zero.x_grove_testbed.pwm/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.arduino.zero.x_grove_testbed.pwm/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.arduino.zero.x_grove_testbed.pwm/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.arduino.zero.x_grove_testbed.pwm/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero/grove.arduino.zero.x_grove_testbed.pwm/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v2.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.base.v1.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeeduino_lotus.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove_pwms.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/x_grove_testbed/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /__w/bridle/bridle/workspace/zephyr/.cache
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeeduino_lotus, Revision: usbcons
-- Shield(s): grove_btn_d7;grove_led_d6;grove_pwm_led_d6;x_grove_testbed
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeeduino_lotus/seeeduino_lotus_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_btn/grove_btn_d7.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_pwm_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/x_grove_testbed.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/boards/seeeduino_lotus.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.seeeduino.lotus.x_grove_testbed.pwm/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.seeeduino.lotus.x_grove_testbed.pwm/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.seeeduino.lotus.x_grove_testbed.pwm/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.seeeduino.lotus.x_grove_testbed.pwm/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeeduino_lotus@usbcons/grove.seeeduino.lotus.x_grove_testbed.pwm/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeed_xiao_samd21, Revision: uartcons
-- Shield(s): seeed_grove_xiao_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_xiao_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_xiao_samd21.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_xiao_v1/seeed_xiao_samd21.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeed_xiao_samd21, Revision: uartcons
-- Shield(s): seeed_grove_xiao_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_xiao_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_xiao_samd21.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_xiao_v1/seeed_xiao_samd21.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1.xiao/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1.xiao/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1.xiao/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1.xiao/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.xiao.v1.xiao/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeed_xiao_samd21, Revision: uartcons
-- Shield(s): seeed_grove_xiao_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_xiao_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_xiao_samd21.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_xiao_v1/seeed_xiao_samd21.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove_pwms.xiao.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove_pwms.xiao.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove_pwms.xiao.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove_pwms.xiao.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove_pwms.xiao.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/x_grove_testbed/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /__w/bridle/bridle/workspace/zephyr/.cache
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: seeed_xiao_samd21, Revision: uartcons
-- Shield(s): seeed_grove_xiao_v1;grove_btn_d0;grove_led_d1;grove_pwm_led_d1;x_grove_testbed
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/seeed_xiao_samd21/seeed_xiao_samd21_uartcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_xiao_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_xiao_samd21.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_xiao_v1/seeed_xiao_samd21.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_btn/grove_btn_d0.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_led_d1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_pwm_led_d1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/x_grove_testbed.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/boards/seeed_xiao_samd21.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.seeeduino.xiao.x_grove_testbed.pwm/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.seeeduino.xiao.x_grove_testbed.pwm/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.seeeduino.xiao.x_grove_testbed.pwm/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.seeeduino.xiao.x_grove_testbed.pwm/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/seeed_xiao_samd21/grove.seeeduino.xiao.x_grove_testbed.pwm/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v2.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1.arduino/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1.arduino/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1.arduino/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1.arduino/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.base.v1.arduino/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v2
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v2/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v2/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v2/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v2/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v2/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/grove/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /github/home/.cache/zephyr
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v1
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v1.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v1/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v1/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v1/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v1/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v1/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove_pwms.base.v1/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)

Loading Zephyr module(s) (Zephyr base): zephyr_default:dts
-- Application: /__w/bridle/bridle/workspace/bridle/tests/shields/x_grove_testbed/dts_bindings
-- CMake version: 3.22.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.4.99 (/__w/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.1
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/toolchains/zephyr-sdk-0.16.1
-- Found Python3: /usr/bin/python (found suitable version "3.10.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /__w/bridle/bridle/workspace/zephyr/.cache
-- Zephyr version: 3.4.99 (/__w/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: arduino_zero, Revision: usbcons
-- Shield(s): seeed_grove_base_v2;grove_btn_d7;grove_led_d6;grove_pwm_led_d6;x_grove_testbed
-- Found host-tools: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found toolchain: zephyr 0.16.1 (/opt/toolchains/zephyr-sdk-0.16.1)
-- Found Dtc: /opt/toolchains/zephyr-sdk-0.16.1/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero.dts
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/arm/arduino_zero/arduino_zero_usbcons.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/seeed_grove_base_v2.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove/boards/seeed_grove_base_v2/arduino_zero.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_btn/grove_btn_d7.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/grove_led/grove_pwm_led_d6.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/x_grove_testbed.overlay
-- Found devicetree overlay: /__w/bridle/bridle/workspace/bridle/boards/shields/x_grove_testbed/boards/arduino_zero.overlay
devicetree error: 'reg' is marked as required in 'properties:' in /__w/bridle/bridle/workspace/zephyr/dts/bindings/sram/mmio-sram.yaml, but does not appear in <Node /memory@20000000 in '/__w/bridle/bridle/workspace/zephyr/misc/empty_file.c'>
-- In: /__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.arduino.zero.x_grove_testbed.pwm/zephyr, command: /usr/bin/python;/__w/bridle/bridle/workspace/zephyr/scripts/dts/gen_defines.py;--dts;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.arduino.zero.x_grove_testbed.pwm/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-spi_bus_bridge -Wno-unique_unit_address_if_enabled';--bindings-dirs;/__w/bridle/bridle/workspace/bridle/dts/bindings;/__w/bridle/bridle/workspace/zephyr/dts/bindings;--header-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.arduino.zero.x_grove_testbed.pwm/zephyr/include/generated/devicetree_generated.h.new;--dts-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.arduino.zero.x_grove_testbed.pwm/zephyr/zephyr.dts.new;--edt-pickle-out;/__w/bridle/bridle/workspace/twister-out/arduino_zero@usbcons/grove.arduino.zero.x_grove_testbed.pwm/zephyr/edt.pickle;--edtlib-Werror;--vendor-prefixes;/__w/bridle/bridle/workspace/bridle/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;/__w/bridle/bridle/workspace/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at zephyr/cmake/modules/dts.cmake:279 (message):
  gen_defines.py failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:129 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:115 (find_package)