Add VIA support for Zed60

[mechlovin]

Description

Add Zed60 Rev. 1 to VIA

QMK Pull Request

qmk/qmk_firmware#17304 (merged)

Checklist

• The VIA support for this keyboard is in QMK master already (MANDATORY)
• The VIA definition follows the guide here: https://caniusevia.com/docs/layouts
• I have tested this keyboard definition using VIA's "Design" tab.
• I have tested this keyboard definition with firmware on a device.
• I have assigned alpha keys and modifier keys with the correct colors.
• The Vendor ID is not 0xFEED

[yiancar]

Hello! I see that the QMK has PID and VID:
#define VENDOR_ID 0x4D4C #define PRODUCT_ID 0x0601 #define DEVICE_VER 0x0001 #define MANUFACTURER Mechlovin Studio #define PRODUCT Zed60

where in VIA:
"vendorId": "0x4D4C", "productId": "0x0602",

[mechlovin]

Hi. The PID was changed to 0x0602 on PR:
qmk/qmk_firmware#17728

[yiancar]

thank youu:)