Welcome to Trema

Trema is a OpenFlow controller framework that includes everything needed to create OpenFlow controllers in Ruby and C.

This distribution includes all the source code of Trema you need to develop your own OpenFlow controllers. The source tree includes basic libraries and functional modules that work as an interface to OpenFlow switches.

Several sample applications developed on top of Trema are also provided, so you can run them as a sample of OpenFlow controllers. Additionally, a simple but powerful framework that emulates an OpenFlow-based network and end-hosts is provided for testing your own controllers. For debugging, a wireshark plug-in to diagnose internal data-flows among functional modules is provided.

Supported Platforms

Trema supports GNU/Linux only. And it has been tested on the following environments:

• Ruby 1.8.7 or higher
• RubyGems 1.3.6 or higher
• Ubuntu 13.04, 12.10, 12.04, 11.10, and 10.04 (i386/amd64, Desktop Edition)
• Debian GNU/Linux 7.0 and 6.0 (i386/amd64)
• Fedora 16-19 (i386/x86_64)

It may also run on other GNU/Linux distributions but is not tested and NOT SUPPORTED at this moment.

Supported OpenFlow Protocol Versions

Trema currently supports OpenFlow version 1.0 only.

Getting Started

1.Install the prerequisites at the command prompt:

(In Ubuntu or Debian GNU/Linux)
$ sudo apt-get install gcc make git ruby rubygems ruby-dev libpcap-dev libsqlite3-dev libglib2.0-dev

(In Ubuntu 10.04)
$ sudo apt-get install gcc make git ruby rubygems ruby-dev libopenssl-ruby libpcap-dev libsqlite3-dev libglib2.0-dev
$ sudo gem install rubygems-update
$ sudo /var/lib/gems/1.8/bin/update_rubygems

(In Fedora 16-19)
$ sudo yum install tar gcc make git ruby rubygems ruby-devel libpcap-devel libsqlite3x-devel glib2-devel

2.Install Trema at the command prompt:

$ sudo gem install trema

3.Optional: Install Wireshark to diagnose internal data-flows.

$ sudo apt-get install wireshark

4.Follow the guidelines to start developing your OpenFlow controller. You may find the following resources handy:

• The Getting Started with Trema.
• The Trema in 10 Minutes Tutorial.
• The Trema Tutorial.
• The Programming Trema Article (in Japanese).

Ruby API

The following is an excerpt from the Trema Ruby API. The full documents are found here http://rubydoc.info/github/trema/trema/master/frames

Event and Message Handlers

Subclass Trema::Controller and override some of the following methods to implement your own controller.

class MyController < Controller
  # handle Packet-In messages here.
  def packet_in datapath_id, message
    # ...
  end

  # handle Flow-Removed messages here.
  def flow_removed datapath_id, message
    # ...
  end

  # ...
end

• switch_ready(datapath_id)
• switch_disconnected(datapath_id)
• list_switches_reply(datapath_ids)
• packet_in(datapath_id, message)
• flow_removed(datapath_id, message)
• port_status(datapath_id, message)
• openflow_error(datapath_id, message)
• features_reply(datapath_id, message)
• stats_reply(datapath_id, message)
• barrier_reply(datapath_id, message)
• get_config_reply(datapath_id, message)
• queue_get_config_reply(datapath_id, message)
• vendor(datapath_id, message)

Flow-Mod and Packet-Out

For sending Flow-Mod and Packet-Out, there are some methods defined in Trema::Controller class.

class MyController < Controller
  def packet_in datapath_id, message
    # ...
    send_flow_mod_add( datapath_id, ... )
    send_packet_out( datapath_id, ... )
  end

  # ...
end

• send_flow_mod_add(datapath_id, options)
• send_flow_mod_delete(datapath_id, options)
• send_flow_mod_modify(datapath_id, options)
• send_packet_out(datapath_id, options)

Other OpenFlow Messages

The following OpenFlow messages can be sent with Trema::Controller#send_message

class MyController < Controller
  def switch_ready datapath_id
    # send a FeaturesRequest message
    send_message datapath_id, FeaturesRequest.new
  end

  def features_reply datapath_id, message
    # ...
  end

  # ...
end

• Trema::Hello
• Trema::EchoRequest
• Trema::EchoReply
• Trema::FeaturesRequest
• Trema::SetConfig
• Trema::GetConfigRequest
• Trema::QueueGetConfigRequest
• Trema::DescStatsRequest
• Trema::FlowStatsRequest
• Trema::AggregateStatsRequest
• Trema::TableStatsRequest
• Trema::PortStatsRequest
• Trema::QueueStatsRequest
• Trema::VendorStatsRequest
• Trema::BarrierRequest
• Trema::PortMod
• Trema::Vendor

Matching Rules

The matching rule of each flow table entry can be created with Match.new(options) and passed as ":match =>" option when sending Flow-Mod or Packet-Out.

def packet_in datapath_id, message
  # ...

  send_flow_mod_add(
    datapath_id,
    :match => Match.new( :in_port => message.in_port, ...)
    # ...
  )

  # ...
end

Also there is a utility method called ExactMatch.from(packetin) for getting an exact match corresponding to a packet.

def packet_in datapath_id, message
  # ...

  send_flow_mod_add(
    datapath_id,
    :match => ExactMatch.from( message )
    # ...
  )

  # ...
end

Actions

The actions list of each flow table entry can be set with ":actions =>" when sending Flow-Mod or Packet-Out.

# Strip the VLAN tag of a packet then send it out to switch port #1
send_flow_mod_add(
  datapath_id,
  # ...
  :actions => [ StripVlanHeader.new, SendOutPort.new( 1 ) ]
)

• Trema::SendOutPort
• Trema::SetEthSrcAddr
• Trema::SetEthDstAddr
• Trema::SetIpSrcAddr
• Trema::SetIpDstAddr
• Trema::SetIpTos
• Trema::SetTransportSrcPort
• Trema::SetTransportDstPort
• Trema::SetVlanVid
• Trema::SetVlanPriority
• Trema::StripVlanHeader
• Trema::VendorAction

Meta

• Web Page: http://trema.github.com/trema/
• Bugs: https://github.com/trema/trema/issues
• Mailing List: https://groups.google.com/group/trema-dev
• Twitter: http://twitter.com/trema_news

Contributors

Special thanks to all contributors for submitting patches. A full list of contributors including their patches can be found at:

https://github.com/trema/trema/contributors

License

Trema is released under the GNU General Public License version 2.0:

• http://www.gnu.org/licenses/gpl-2.0.html