Fix installation link path #7
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Thanks @jericopulvera! 💟 |
RobinMalfait
added a commit
that referenced
this pull request
Sep 20, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 20, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 21, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 23, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 23, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 23, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
RobinMalfait
added a commit
that referenced
this pull request
Sep 24, 2024
A bit of a vague commit message, but this does a lot of things. I could split it up, but not sure if it's worth it. Instead, let's talk about it. While working on keeping track of comment locations I was running into some issues. Not the end of the world, but we could make things better. Paired with Jordan on this to rework the algorithm. The idea is that we now do multiple passes which is technically slower, but now we can work on separate units of work. - Step #1 is to prepare the at-rule. This means that rules with multiple selectors will be split in multiple nodes with the their own single selector. - Step #2 is to collect all the classes we want to create an `@utility` for. - Step #3 is to create a clone of the main `@layer utilities` for all the non-`@utility` leftover nodes (E.g.: rules with element and ID selectors). - Step #4 is to create a clone of the main `@layer utilities` node for every single `@utility <name>` we want to create. - Step #5 is to go over every clone, and eliminate everything that is not part of the `@utility` in question. So we can remove siblings (except for comments near it) and go up the chain. - Step #6 is now to go over the initial `@layer utilities` clone we set aside, and remove everything that's not part of any of the clones. - Step #7 is cleanup work, where empty nodes are removed, and rules with a selector of `&` are replaced by its children. This is done in a depth-first traversal instead of breadth first. Co-authored-by: Jordan Pittman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.