This tutorial will serve as a quick guide for getting svelTest programs up and running. All of the code used throughout the tutorial can be found here. #Table of Contents
- Introduction
- Setup
- Hello World
- File
- Funct
5.1 What the Funct? - I/OL
6.1 Input
6.2 Output
6.3 readlines() - Return & Assert
7.1 verbose - Main
- If/Else
- Another Example: Add
- Arrays
- Writing Svelter Code: Looking at Add Again
- Conclusion
The svelTest Language Tutorial will serve as a quick guide for getting svelTest programs up and running. This guide will go through several major aspects of the svelTest language by looking at various simple examples.
The svelTest programming language aims to simplify the complex process of testing production code. Our language targets any programmer looking for a simplified way to test source code to their specifications, in their own environment.
The purpose of this tutorial is to introduce the user to the basics of svelTest, allowing them to easily pick up svelTest syntax and code style. These examples concentrate on the basics of the language like variable declaration, arithmetic operations, loading source code files, and manipulating test case output.
It is important for the user to understand that this is not a complete tutorial on svelTest. Like any programming language, practice makes a great programmer. For more in-depth information on the intricacies of svelTest, please refer to our Language Reference Manual.
Remember to have fun, and you’ll be writing svelte code before you know it!
svelTest does not require any outside packages or installers. The compiler was developed under Python version 2.7.3, so it will work best with that (but any Python 2.7.x version should be fine). Fire up your favorite text editor and you’re ready to start programming! We do, however, expect if you want to test Java programs that you to have configured your Java environment properly, and can compile and run Java programs from your favorite shell using javac and java respectively. svelTest currently supports Java SE 6. To check your Java version, type java -version into your shell. If you see java version "1.6.0_XX", you’re in luck! If you see java version 1.7.X or 1.8.X, please make sure to roll back to Java 6. We also support Python 2.7.x and any version of gcc that supports C99; you can perform similar checks for these dependencies. For the rest of this tutorial, we will use Java.
To get familiar with svelTest syntax, we can look at the svelTest’s interpretation of Hello World. This program prints “Hello World!” to the console.
// hello.svel
// prints "Hello World!" to console
lang = None;
main() {
string hello = "Hello World!";
print(hello);
}Each svelTest program needs a lang declaration and a main function to run a program. (In this case, since we’re not testing any code, we use the None keyword; we’ll discuss lang more in our next example.) Each declaration is ended with a semicolon; whitespace and indentation do not matter to the compiler. To declare an object like a string or an int, much like Java, you need to first declare the type, then name the object. A string literal is indicated by quotation marks.
print is a reserved word in svelTest that prints to the console.
Though hello.svel is a valid svelTest program, it does not really show what the language can do. Let’s look at Java’s Hello World.
// Hello.java
// prints "Hello World!" to console
public class Hello {
public static void main (String args[]) {
String hello = "Hello World!";
System.out.println(hello);
}
}A svelTest program to test the output of Hello.java (which should be “Hello World!”) would look like this:
// helloJava.svel
// tests Hello.java
lang = Java;
boolean helloWorldTest() {
file helloFile = "HelloWorld.java";
funct helloMain = {__main__, (j_String[]), helloFile};
input _in = ();
output out = "Hello World!";
return helloMain.assert(_in, out);
}
main() {
if (helloWorldTest()) {
print("Hello World passed!");
} else {
print("Hello World failed.");
}
}Compiling your svelTest program is easy. You should have the lib folder containing the compile script; let’s say you also have another folder called tutorial. (We have this structure on our repo here.) Navigate into lib, then type:
./compile.sh ../tutorial/helloJava.svel
This will produce helloJava.py in the testing folder. The helloJava.py file does the grunt work of testing and comparing output as well as manipulating that output however you wish. All you have to do is change into the testing directory and run the compiled Python program:
cd ../testing
python helloJava.py
####Let’s go through the program line by line, starting with the following:
//tests Hello.java
Comments in svelTest are indicated by a // or /* ... */ for block comments; comments cannot be nested. The following are all valid comments:
// this is valid
/* this is valid too */
/* this is
* also valid
*/
lang, as we mentioned earlier, is the language specifier.
lang = Java;
In this case, we’re testing a Java program, so we must specify that lang equals Java. We also support Python, C, and None. These specifications determine which helper files to import to the compiled code; using None can avoid that overhead if it isn’t need.
####Next, we have:
boolean helloWorldTest () {
...
}Methods in svelTest must be declared with their return type; in this case, helloWorldTest() returns a boolean. Function definitions are enclosed by curly braces. If the svelTest method does not return a value, declare the method with the void return type.
Functions in svelTest must also be fully defined before they are used. Note that main() uses helloWorldTest(); if helloWorldTest() was not fully defined before main(), the compiler would throw an error.
file helloFile = "../Hello.java";
file is used to select the file you want to test; it is followed by the object name. On the right side of the equals, the name of the file is entered as a string literal. In this case, we’re making a file object called helloFile and indicating that the Hello.java file is one directory above the svelTest program.
The funct type is a wrapper to specify the method to test.
The funct type is easy to use and declare.
funct helloMain = {__main__, (j_String[]), helloFile};
funct is used to select which method of the file to test. It requires the name of the method, the the formal parameter type(s) of the method (more parameters can be added, separated by commas), and the file containing the method.
input _in = ();
input is used to denote the input required by the method being tested. Multiple parameters should be separated by commas. In this case, it is empty because the main method of Hello.java does not take any parameters. Note that we cannot call this input in but instead must call it _in; this is because in is a reserved keyword in svelTest programs. (See our Language Reference Manual for a full list of reserved words.)
output out = "Hello World!";
output is use to denote the expected output of the method you are testing. An output can take the value of any type in the source programming language.
####While we don’t use readlines() in our helloJava.svel program, we want to cover it briefly in our discussion of file I/O.
Take a look at the following snippet:
file outputs = "outputs.txt";
output[] out = outputs.readlines();
The file type has the reserved, built-in function readlines() that reads the entire contents of a file into a string array. (In this case, we can put those results directly into an output array, since outputs take strings.) The trailing newline character is stripped from each string as each line is copied to the array. This allows the user to easily load sets of inputs and outputs from ASCII text files into string arrays for use in a svelTest program.
return helloMain.assert(_in, out);
The helloWorldTest() function must return a boolean. When the assert() function is called on a funct, it uses the input and output parameters to test the method. assert() then returns either true or false depending if the expected output matches the method’s standard output.
assert() also has an optional third argument, verbose. Specifying verbose as the third argument adds additional functionality to assert(): instead of just returning true or false, assert() will also print test information to standard output for you. For example, something like
helloMain.assert(_in, out, verbose);
would print
main()... PASS
without any additional code.
main(){
...
}Each svelTest file is required to have a main method. It should be at the bottom of the file, after the methods it calls are declared.
if (helloWorldTest()) {
print("Hello World passed!");
} else {
print("Hello World failed.");
}This is a standard if/else statement that tells the program what to do in case of success or failure. If helloWorldTest() returns true (the assert test matches), it will print “Hello World passed!” to standard output. If not, it will print “Hello World failed.”
Consider the following Java file that contains a method to add two Java integers:
// Add.java
public class Add {
public static void main(String[] args) {
int z = add(1, 2);
System.out.println("The sum of 1 and 2 is " + z);
}
public static int add(int x, int y) {
return x + y;
}
}Suppose you wanted to make sure that just the function add() worked correctly. You want to check multiple cases and track which tests it passes. A svelTest program to test the add() function would look like this:
// add.svel
// test suite for add function in Add.java
lang = Java;
int addTestSuite() {
int addSuccessCounter = 0;
// svelTest test idiom:
// 1. declare a file
// 2. declare a funct (ie: the source program or method to test)
// 3. create input(s) and corresponding output(s)
// 4. call assert() on the funct with the input(s) and output(s)
file addFile = "Add.java";
funct add = {"add", (j_int, j_int), addFile};
input in1 = (1, 2);
output out1 = 3;
input in2 = (-2, 2);
output out2 = 0;
input[] inArray = {in1, in2};
output[] outArray = {};
outArray.append(out1);
outArray.append(out2);
for(int i = 0; i < inArray.size(); i = i+1) {
if (add.assert(inArray[i], outArray[i])) {
addSuccessCounter = addSuccessCounter + 1;
}
}
return addSuccessCounter;
}
main() {
int successNumber = addTestSuite();
if (successNumber == 2) {
print("2/2 cases are successful");
} else {
print("method did not work as intended");
}
}The method addTestSuite() is declared with a return type of int. It declares an int called addSuccessCounter and initializes it to zero. It then specifies the location of Add.java with a file and creates a funct to test the add() function, which takes two Java integers (j_int) as parameters.
Arrays can be instantiated directly or dynamically.
input in1 = (1, 2);
output out1 = 3;
input in2 = (-2, 2);
output out2 = 0;
input[] inArray = {in1, in2};
output[] outArray = {};
outArray.append(out1);
outArray.append(out2);In this section we create two inputs that have two ints enclosed in parentheses and separated by commas. We also make two corresponding outputs. The following lines show how to add objects to arrays. In the input array, we add the already created objects to inArray in the same line as the declaration. In the output array, we declare the array and use append() to add the two outputs to the end of the array. Note that we must initialize outArray as empty with curly brackets in order to append or insert values into it.
for(int i = 0; i < inArray.size(); i++) {
if (add.assert(inArray[i], outArray[i])) {
addSuccessCounter++;
}
}svelTest supports for loops that have 3 parameters: one that initializes a counter, a boolean expression, and an incrementer. This boolean expression uses size() to compare i with the number of elements in the array. The for loop contains an if statement to check each element of the input array against the corresponding element with the same index of the output array. If the test evaluates as true, addSuccessCounter will increment.
The end of the method returns addSuccessCounter.
The main method of this .svel file runs addTestSuite() and prints out that the cases were successful if it passed two out of two tests.
A last note on arrays: Other supported array functions are remove(), insert(), size(), and replace(). The prototypes are outlined below:
a.remove(int index)a.insert(int index, object o)a.size()a.replace(int index, object o)
You might notice that our add.svel program looks a little bulky: only 10 lines of Java code to test led to over 40 lines of svelTest code. The add.svel program was intentionally written to be very clear, but a lot of the idioms can be condensed. Take a look at our svelter version:
// addSvelter.svel
// more succinct test suite for add function in Add.java
lang = Java;
main() {
funct add = {"add", (j_int, j_int), "Add.java"};
input[] inArray = {(1,2), (-2,2), (4, 5)};
output[] outArray = {3, 0, 10};
// the third test case should fail (4+5 != 10)
for(int i = 0; i < inArray.size(); i = i+1) {
add.assert(inArray[i], outArray[i], verbose);
}
}Hopefully you can convince yourself that you’ll see the following output:
add(1, 2)... PASS
add(-2, 2)... PASS
add(4, 5)... FAIL
returned: 9
expected: 10
If you don’t believe us, give it a try yourself! As you can see, only 10 lines of code now successfully run three test cases.
This Language Tutorial covers the basic capabilities of the svelTest programming language. We hope that this tutorial will be useful in assisting users in writing their own, more complex, testing programs. Although we only used Java in this tutorial, writing your own svelTest programs to test C and Python should be nearly identical, but check out the Reference Manual for more extensive discussion. As stated previously, please see our Language Reference Manual for a more comprehensive analysis of the features of svelTest.