Arduino library to support the M95640-R SPI EEPROM
This sensor uses SPI to communicate.
For SPI it is then required to create a SPI interface before accessing to the sensors:
dev_spi = new SPIClass(SPI_MOSI, SPI_MISO, SPI_SCK);
dev_spi->begin();
An instance can be created and enabled with SPI bus following the procedure below:
myM95640R = new M95640R(devSPI, D5);
myM95640R->begin();
If you want to read the EEPROM you can call the following API:
myM95640R->EepromRead(0x0000, 32, tmpBuffer);
If you want to write data into the EEPROM you can call the following API:
myM95640R->EepromWrite(0x0000, 32, tmpBuffer);
You can find the source files at
https://github.com/stm32duino/M95640-R
The M95640-R EEPROM datasheet is available at
https://www.st.com/content/st_com/en/products/memories/serial-eeprom/standard-serial-eeprom/standard-spi-eeprom/m95640-r.html
