rdpwrap_ini_updater: support for 10.0.18362.267, 10.0.18362.53, 10.0.18362.1, 10.0.17134.706 ... #795

asmtron · 2019-05-24T23:11:20Z

Hi,

the batch file rdpwrap_ini_updater add support to rdpwrap.ini for the following new termsrv.dll versions:

10.0.18362.267
10.0.18362.53 (Build 18362.239, 18362.207, 18362.175, 18362.145, 18362.116, 18362.53)
10.0.18362.1
10.0.17763.437
10.0.17763.379
10.0.17763.292
10.0.17763.165 x64
10.0.17134.706

It's easy to use and can be extended to newer upcoming versions...

rdpwrap_ini_updater_(02_August_2019).zip

Usage:
copy the batch files from zip archive to the "Program Files\RDP Wrapper" directory and then run "re-install.bat" as administrator

Note: RDP Wrapper needs the original termsrv.dll versions to work properly.
Note: Please copy files only to the default directory %ProgramFiles%\RDP Wrapper
Note: Add exclusion on Windows Defender (or other AV) for directory %ProgramFiles%\RDP Wrapper

The text was updated successfully, but these errors were encountered:

asmtron · 2019-05-24T23:29:07Z

Steps to reinstall

uninstall.bat
install.bat
rdpwrap_ini_updater.bat

blb4github · 2019-05-24T23:29:31Z

thanks! I see some x86 version are missing, e.g. for version 10.0.18362.1. Any Idea to get that version included?

asmtron · 2019-05-24T23:48:54Z

... upload the 10.0.18362.1 x86 termsrv.dll

blb4github · 2019-05-25T00:10:59Z

termsrv.zip
Attached the 10.0.18362.1 x86 termserv.dll, thanks!

sk-lau · 2019-05-27T09:21:44Z

Although my termsrv.dll is version 10.0.18362.53

After updating using this bat file, my pc is still single user

syou21 · 2019-05-28T02:23:23Z

RDP Wrapper Library is already installed

why rdpwrap.ini not found

sk-lau · 2019-05-29T09:59:34Z

termsrv.zip
Attached the 10.0.18362.1 x86 termserv.dll, thanks!

this termsrv.dll doesn't work. I managed to replace the original with this version. And patch it with the .bat file above. After that RDP service cannot start

Monster0303 · 2019-05-29T10:50:51Z

1903 18362 succeeded
step:

Execute install.bat
Copy RDPWInst.exe and rdpwrap_ini_updater.bat to C:\Program Files\RDP Wrapper\
Execute rdpwrap_ini_updater.bat
Success

sk-lau · 2019-05-30T03:56:43Z

Followed instructions but still get only single session rdp. Screenshot as below

I'm using the original termserv.dll

IlFenomeno9 · 2019-05-30T08:23:22Z

Hi Guys. I make RDP working normally on W10 Pro 1903 version by instructions above from user ljf0717, printers are redirecting normally, but not using Easy Desktop print driver first but original driver which is installed on my computer (Easy Desktop print driver is needed for some HP printers that don't support remote print through HP drivers). If anyone solve this with printers pls write here. Thx

icekingcy · 2019-05-30T10:45:49Z

1903 18362 succeeded
step:

Execute install.bat

Copy RDPWInst.exe and rdpwrap_ini_updater.bat to C:\Program Files\RDP Wrapper\

Execute rdpwrap_ini_updater.bat

Success

Work！

Thanks！

JaWaRo · 2019-05-30T11:47:42Z

Hi,
termsrv.dll: 10.0.17763.437
Windows 10 Pro: 1809 17763.529

Steps:

Copy RDPWInst.exe and rdpwrap_ini_updater.bat to C:\Program Files\RDP Wrapper\
Execute rdpwrap_ini_updater.bat

Success !
Thanks !

Octanium91 · 2019-06-01T10:04:45Z

same program - https://www.octaniumsw.site//2019/04/rdp-wrapper-confg-update-tool-en.html (but gets info from web)

blueberry-bytes · 2019-06-04T05:23:29Z

Every few days I have the same problem. My system gets updated, file version doesn't change, everything is green in the window, but RDP can't connect. Every time I manage to find some new ini here and it works again but this time it just won't. I tried to use both updaters above. What else can I do?

sbhawks · 2019-06-04T06:16:39Z

Please support for x86 version on 10.0.18362.53
termsrv_10.0.18362.53_x86.zip

NewtCon · 2019-06-05T02:32:49Z

Hi All,

I've run "re-install.bat" as administrator but listener state is not listening, despite being fully supported.

I'm on W10 Home v1809 OS build 17763.504 with termsrv.dll 10.0.17763.437.

Can anyone help, please?

mer30hamid · 2019-06-05T14:27:06Z

Hi All,

I've run "re-install.bat" as administrator but listener state is not listening, despite being fully supported.

I'm on W10 Home v1809 OS build 17763.504 with termsrv.dll 10.0.17763.437.

Can anyone help, please?

Hi, I have same problem, The attached "rdpwrap.ini" file Make the "Listener state" to "Listening" but when I try to remote, connection closes very fast !
I found it here :
https://github.com/tmaguire/rdpwrap/releases

cynepnaxa · 2019-06-06T10:00:47Z

Hello! I unpack rdpwrap_ini_updater_(03_June_2019).zip reinstall and reboot.
It works, but "single session per user" don't work. I boot PC, do something, later i connect to PC remotely via local net and rdp always opens new session. So i need always connect to old session from users tab.

I need simultaneos multiple users work, but only one session. What can i do?
Reinstall success but i see that change date is 15.04.2019

asmtron · 2019-06-07T11:43:07Z

Problems with: 10.0.17763.437 x64 -> please try the new rdpwrap_ini_updater_(07_June_2019).zip

blb4github · 2019-06-07T14:36:27Z

Hi asmtron, thanks for today’s update. I’ve re-installed with this version on build 18362.53 x86 but it’s not working yet (not listening). It’s restarting service a couple of times, than stops.

Jeka80jeka · 2020-02-04T19:44:36Z

Please, help.
Windows 10.0.18362.3 build, printers are not migrated after updating rdp wrap.
In RDPConf everything is ok.
thank you

Artycoka · 2020-02-05T18:30:23Z

Please, help.
Windows 10.0.18362.3 build, printers are not migrated after updating rdp wrap.
In RDPConf everything is ok.
thank you

same issue

gonzalolamata · 2020-02-11T23:28:01Z

I need your help, today the version of Windows was updated to “10.0.18362.657”

The update of 2-ogosto-2019 does not work for me

You can tell me how to update RDP to this version.

Thank you.

nakemar · 2020-02-12T01:19:38Z

Try adding this to the end of your .ini file and don't forget the blank line at the bottom ... :

[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

Artycoka · 2020-02-12T08:54:55Z

Try adding this to the end of your .ini file and don't forget the blank line at the bottom ... :

[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

Is it fixing the print issue?

jhonny003 · 2020-02-12T15:35:58Z

hola! tengo el mismo problema y realicé los pasos de agregar las lineas anteriores dentro del .ini pero al reiniciar el sistema me puso el SERVICE STATE en STOPPED y el LISTENER STATE en NOT LISTENING pero FULLY SUPPORTED.

Pudieron encontrar alguna solución para el rdpwrap_10.0.18362.567 ???

DESDE YA, MUCHAS GRACIAS!
Juan Manuel

gonzalolamata · 2020-02-12T18:12:27Z

Lo acabo de probar y funciona perfectamente.

Gracias por la rapidez y la eficacia.

I just tried it and it works perfectly.

Thanks for the speed and efficiency.

jhonny003 · 2020-02-12T18:26:52Z

Lo acabo de probar y funciona perfectamente.

Gracias por la rapidez y la eficacia.

I just tried it and it works perfectly.

Thanks for the speed and efficiency.

Gonza... cómo lograste resolverlo? Con qué versión te quedó trabajando... con la 18362.567? Te molesto porque yo no logré resolverlo.

gonzalolamata · 2020-02-12T19:46:59Z

Simplemente aplicando la actualización de agosto. y después unicamente añadir al archivo "rdpwrap.ini" ubicado en "C:\Program Files\RDP Wrapper".

`
[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

`

NOTA: Para editar el archivo "rdpwrap.ini" hay que hacerlo como administrador.
Importante dejar una linea vacía al final de archivo.

RingIT-Tech · 2020-02-12T23:27:18Z

Try adding this to the end of your .ini file and don't forget the blank line at the bottom ... :
[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize
[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

Is it fixing the print issue?

I tried the above fix and its not working. Build windows build is Windows 10 Pro, 1909, 18363.657

After loading this into the ini I get this error

ner00 · 2020-02-13T01:51:15Z

Are you sure that you have an empty line after the last line (SLInitFunc.x64) of the first block?

And then another empty line at the end of the second block, after the last line (bFUSEnabled.x64)?

jwalkerbg · 2020-02-18T12:29:37Z

My case:

I added above lines at the end of rdpwrap.ini, including obligatory empty lines. However, after executing re-install.bat these added lines disappeared from from rdpwrap.ini and rdpconf.exe showed not supported version.

Because of that I edited re-install.bat and added:

At the end of section :start_update:

findstr /x /c:"[10.0.18362.657]" %rdpwrap_ini% >nul || call :Update_10_0_18362_657

and at the end of the file

:Update_10_0_18362_657
set updated=1
echo [+] add support for termsrv.dll v.10.0.18362.657
(
echo.
echo [10.0.18362.657]
echo LocalOnlyPatch.x64=1
echo LocalOnlyOffset.x64=82FB5
echo LocalOnlyCode.x64=jmpshort
echo SingleUserPatch.x64=1
echo SingleUserOffset.x64=0DBFC
echo SingleUserCode.x64=Zero
echo DefPolicyPatch.x64=1
echo DefPolicyOffset.x64=1FE15
echo DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
echo SLInitHook.x64=1
echo SLInitOffset.x64=22DDC
echo SLInitFunc.x64=New_CSLQuery_Initialize
echo. 
echo [10.0.18362.657-SLInit]
echo bInitialized.x64 =F6A8C
echo bServerSku.x64 =F6A90
echo lMaxUserSessions.x64 =F6A94
echo bAppServerAllowed.x64 =F6A9C
echo bRemoteConnAllowed.x64=F6AA0
echo bMultimonAllowed.x64 =F6AA4
echo ulMaxDebugSessions.x64=F6AA8
echo bFUSEnabled.x64 =F6AAC
) >> %rdpwrap_ini%
goto :eof

These are the same codes with echo command in front of them. Then I executed re-install.bat and saw

BUDDGAF · 2020-02-20T15:40:19Z

My case:

I added above lines at the end of rdpwrap.ini, including obligatory empty lines. However, after executing re-install.bat these added lines disappeared from from rdpwrap.ini and rdpconf.exe showed not supported version.

Because of that I edited re-install.bat and added:

At the end of section :start_update:
findstr /x /c:"[10.0.18362.657]" %rdpwrap_ini% >nul || call :Update_10_0_18362_657
and at the end of the file
:Update_10_0_18362_657
set updated=1
echo [+] add support for termsrv.dll v.10.0.18362.657
(
echo.
echo [10.0.18362.657]
echo LocalOnlyPatch.x64=1
echo LocalOnlyOffset.x64=82FB5
echo LocalOnlyCode.x64=jmpshort
echo SingleUserPatch.x64=1
echo SingleUserOffset.x64=0DBFC
echo SingleUserCode.x64=Zero
echo DefPolicyPatch.x64=1
echo DefPolicyOffset.x64=1FE15
echo DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
echo SLInitHook.x64=1
echo SLInitOffset.x64=22DDC
echo SLInitFunc.x64=New_CSLQuery_Initialize
echo. 
echo [10.0.18362.657-SLInit]
echo bInitialized.x64 =F6A8C
echo bServerSku.x64 =F6A90
echo lMaxUserSessions.x64 =F6A94
echo bAppServerAllowed.x64 =F6A9C
echo bRemoteConnAllowed.x64=F6AA0
echo bMultimonAllowed.x64 =F6AA4
echo ulMaxDebugSessions.x64=F6AA8
echo bFUSEnabled.x64 =F6AAC
) >> %rdpwrap_ini%
goto :eof
These are the same codes with echo command in front of them. Then I executed re-install.bat and saw

The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!

Vakasutra · 2020-02-21T15:41:11Z

My case:
I added above lines at the end of rdpwrap.ini, including obligatory empty lines. However, after executing re-install.bat these added lines disappeared from from rdpwrap.ini and rdpconf.exe showed not supported version.
Because of that I edited re-install.bat and added:
At the end of section :start_update:
findstr /x /c:"[10.0.18362.657]" %rdpwrap_ini% >nul || call :Update_10_0_18362_657
and at the end of the file
:Update_10_0_18362_657
set updated=1
echo [+] add support for termsrv.dll v.10.0.18362.657
(
echo.
echo [10.0.18362.657]
echo LocalOnlyPatch.x64=1
echo LocalOnlyOffset.x64=82FB5
echo LocalOnlyCode.x64=jmpshort
echo SingleUserPatch.x64=1
echo SingleUserOffset.x64=0DBFC
echo SingleUserCode.x64=Zero
echo DefPolicyPatch.x64=1
echo DefPolicyOffset.x64=1FE15
echo DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
echo SLInitHook.x64=1
echo SLInitOffset.x64=22DDC
echo SLInitFunc.x64=New_CSLQuery_Initialize
echo. 
echo [10.0.18362.657-SLInit]
echo bInitialized.x64 =F6A8C
echo bServerSku.x64 =F6A90
echo lMaxUserSessions.x64 =F6A94
echo bAppServerAllowed.x64 =F6A9C
echo bRemoteConnAllowed.x64=F6AA0
echo bMultimonAllowed.x64 =F6AA4
echo ulMaxDebugSessions.x64=F6AA8
echo bFUSEnabled.x64 =F6AAC
) >> %rdpwrap_ini%
goto :eof
These are the same codes with echo command in front of them. Then I executed re-install.bat and saw
The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!

Hi guys ... could you help me, I already added the lines, but it appears to me that I am doing it wrong.
Could you please help me

Vakasutra · 2020-02-21T16:19:00Z

My case:
I added above lines at the end of rdpwrap.ini, including obligatory empty lines. However, after executing re-install.bat these added lines disappeared from from rdpwrap.ini and rdpconf.exe showed not supported version.
Because of that I edited re-install.bat and added:
At the end of section :start_update:
findstr /x /c:"[10.0.18362.657]" %rdpwrap_ini% >nul || call :Update_10_0_18362_657
and at the end of the file
:Update_10_0_18362_657
set updated=1
echo [+] add support for termsrv.dll v.10.0.18362.657
(
echo.
echo [10.0.18362.657]
echo LocalOnlyPatch.x64=1
echo LocalOnlyOffset.x64=82FB5
echo LocalOnlyCode.x64=jmpshort
echo SingleUserPatch.x64=1
echo SingleUserOffset.x64=0DBFC
echo SingleUserCode.x64=Zero
echo DefPolicyPatch.x64=1
echo DefPolicyOffset.x64=1FE15
echo DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
echo SLInitHook.x64=1
echo SLInitOffset.x64=22DDC
echo SLInitFunc.x64=New_CSLQuery_Initialize
echo. 
echo [10.0.18362.657-SLInit]
echo bInitialized.x64 =F6A8C
echo bServerSku.x64 =F6A90
echo lMaxUserSessions.x64 =F6A94
echo bAppServerAllowed.x64 =F6A9C
echo bRemoteConnAllowed.x64=F6AA0
echo bMultimonAllowed.x64 =F6AA4
echo ulMaxDebugSessions.x64=F6AA8
echo bFUSEnabled.x64 =F6AAC
) >> %rdpwrap_ini%
goto :eof
These are the same codes with echo command in front of them. Then I executed re-install.bat and saw
The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!
Hi guys ... could you help me, I already added the lines, but it appears to me that I am doing it wrong.
Could you please help me

Hello again ... I could correct that message but now what happens is that if I log in with multisession in the Remote Desktop the account is loaded but in the main machine that user disconnects me and I can see what they do with the one connected. Help

graphixillusion · 2020-02-21T16:44:10Z

@Vakasutra you need to uncheck the option: "single session per user"

iacob28 · 2020-03-11T14:40:32Z

Try adding this to the end of your .ini file and don't forget the blank line at the bottom ... :

[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

This works for me

thestinger24rus · 2020-03-11T14:58:49Z

Try adding this to the end of your .ini file and don't forget the blank line at the bottom ... :
[10.0.18362.657]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize
[10.0.18362.657-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

This works for me

Change authentication mode to NLA for secure reason

graphixillusion · 2020-03-11T15:12:12Z

@thestinger24rus the NLA auth works for you? You can set in the config but after the first connect, if you open the config again it switches back to GUI Auth.

thestinger24rus · 2020-03-11T17:24:54Z

@thestinger24rus the NLA auth works for you? You can set in the config but after the first connect, if you open the config again it switches back to GUI Auth.

i see it now. Just checked my server (i disabled updates there) and it works well. Checked my home win10 (i dont use RDPwrap actually) and its alway GUI. Need new injection code

antonioambriz · 2020-03-24T18:39:24Z

My case:

I added above lines at the end of rdpwrap.ini, including obligatory empty lines. However, after executing re-install.bat these added lines disappeared from from rdpwrap.ini and rdpconf.exe showed not supported version.

Because of that I edited re-install.bat and added:

At the end of section :start_update:
findstr /x /c:"[10.0.18362.657]" %rdpwrap_ini% >nul || call :Update_10_0_18362_657
and at the end of the file
:Update_10_0_18362_657
set updated=1
echo [+] add support for termsrv.dll v.10.0.18362.657
(
echo.
echo [10.0.18362.657]
echo LocalOnlyPatch.x64=1
echo LocalOnlyOffset.x64=82FB5
echo LocalOnlyCode.x64=jmpshort
echo SingleUserPatch.x64=1
echo SingleUserOffset.x64=0DBFC
echo SingleUserCode.x64=Zero
echo DefPolicyPatch.x64=1
echo DefPolicyOffset.x64=1FE15
echo DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
echo SLInitHook.x64=1
echo SLInitOffset.x64=22DDC
echo SLInitFunc.x64=New_CSLQuery_Initialize
echo. 
echo [10.0.18362.657-SLInit]
echo bInitialized.x64 =F6A8C
echo bServerSku.x64 =F6A90
echo lMaxUserSessions.x64 =F6A94
echo bAppServerAllowed.x64 =F6A9C
echo bRemoteConnAllowed.x64=F6AA0
echo bMultimonAllowed.x64 =F6AA4
echo ulMaxDebugSessions.x64=F6AA8
echo bFUSEnabled.x64 =F6AAC
) >> %rdpwrap_ini%
goto :eof
These are the same codes with echo command in front of them. Then I executed re-install.bat and saw

Working with these procedure. Thank you for sharing!

srosato · 2020-03-31T23:49:19Z

Worked like a charm by following procedure + highly rated comments here for version 10.0.18362.267. Thanks a lot for this, it is a life saver!

g0mtech · 2020-06-10T09:24:56Z

1903 version don't work.

ner00 · 2020-06-10T10:43:13Z

1903 version don't work.

That's the Windows version. The only thing that matters is the termsrv.dll version. And honestly, I'm pretty sure the latest updates of 1903 are already covered and work fine.

g0mtech · 2020-06-10T11:52:43Z

1903 version don't work.

That's the Windows version. The only thing that matters is the termsrv.dll version. And honestly, I'm pretty sure the latest updates of 1903 are already covered and work fine.

of course this is windows version. not linux)

ner00 · 2020-06-10T11:55:12Z

of course this is windows version. not linux)

Did you miss the point or are you just trolling? 1903 means nothing because the patches are based on the termsrv DLL.'s version. In other words: saying "1903 version don't work." means nothing to anyone.

enigmen · 2020-10-14T07:01:22Z

MarkTycoon · 2020-10-25T19:44:18Z

Got it working with the latest Windows 10 Enterprise 1809 (LTSC) using the following ini updater:
https://github.com/Octanium91/rdpwupDownloads/ (download latest version)

Make clean install of RDP wrapper (with reboots) >> run the rdwup tool (get needed config) >> reboot >> open the beer

termsrv.dll version: 10.0.17763.771 (termsrv.dll.zip)
Attached my RDP Wrapper folder in case it helps (RDP Wrapper.zip)
RDP Wrapper.zip
termsrv.dll.zip

I also have modified the Group Policy ()dont know if that helped but just in case see the following screenshot (gpedit.msc):

sebaxakerhtc · 2022-01-04T10:49:39Z

One version = one issue

This was referenced May 24, 2019

win10 18362.53 #766

Closed

W10 Version 10.0.18362.116 UPDATE (1903 May 2019) #792

Closed

MadDog927ca mentioned this issue May 28, 2019

Support for release 17763.529 #796

Closed

This was referenced May 30, 2019

Please support for Windows 10 1809 - 10.0.17763.437 #759

Closed

Error [7069]:The target session is incompatible with the current session in 10.0.17763.437 #787

Closed

This was referenced Jun 3, 2019

New Windows 10 Version 10.0.18865.1000 #804

Open

New Windows 10 version 10.0.18362.145 #803

Open

Need Help. Not supported 10.0.18362.53 #802

Open

This was referenced Jun 7, 2019

need help!　All items under Diagnostics are green ,but it's not working..... #800

Closed

Creating multiple sessions #801

Closed

sebaxakerhtc closed this as completed Jan 4, 2022

rdpwrap_ini_updater: support for 10.0.18362.267, 10.0.18362.53, 10.0.18362.1, 10.0.17134.706 ... #795

rdpwrap_ini_updater: support for 10.0.18362.267, 10.0.18362.53, 10.0.18362.1, 10.0.17134.706 ... #795

Comments

asmtron commented May 24, 2019 • edited Loading

asmtron commented May 24, 2019

blb4github commented May 24, 2019 • edited Loading

asmtron commented May 24, 2019

blb4github commented May 25, 2019

sk-lau commented May 27, 2019

syou21 commented May 28, 2019

sk-lau commented May 29, 2019

Monster0303 commented May 29, 2019

sk-lau commented May 30, 2019

IlFenomeno9 commented May 30, 2019 • edited Loading

icekingcy commented May 30, 2019

JaWaRo commented May 30, 2019 • edited Loading

Octanium91 commented Jun 1, 2019

blueberry-bytes commented Jun 4, 2019

sbhawks commented Jun 4, 2019

NewtCon commented Jun 5, 2019

mer30hamid commented Jun 5, 2019 • edited Loading

cynepnaxa commented Jun 6, 2019

asmtron commented Jun 7, 2019

blb4github commented Jun 7, 2019

Jeka80jeka commented Feb 4, 2020

Artycoka commented Feb 5, 2020

gonzalolamata commented Feb 11, 2020

nakemar commented Feb 12, 2020

Artycoka commented Feb 12, 2020

jhonny003 commented Feb 12, 2020

gonzalolamata commented Feb 12, 2020

jhonny003 commented Feb 12, 2020

gonzalolamata commented Feb 12, 2020

RingIT-Tech commented Feb 12, 2020

ner00 commented Feb 13, 2020

jwalkerbg commented Feb 18, 2020 • edited Loading

BUDDGAF commented Feb 20, 2020

The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!

Vakasutra commented Feb 21, 2020

The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!

Vakasutra commented Feb 21, 2020

The solution I just quoted works for 1909 build 18636.657 as well. thank you sir!

graphixillusion commented Feb 21, 2020 • edited Loading

iacob28 commented Mar 11, 2020

thestinger24rus commented Mar 11, 2020

graphixillusion commented Mar 11, 2020

thestinger24rus commented Mar 11, 2020

antonioambriz commented Mar 24, 2020

srosato commented Mar 31, 2020

g0mtech commented Jun 10, 2020

ner00 commented Jun 10, 2020

g0mtech commented Jun 10, 2020

ner00 commented Jun 10, 2020 • edited Loading

enigmen commented Oct 14, 2020

MarkTycoon commented Oct 25, 2020 • edited Loading

sebaxakerhtc commented Jan 4, 2022

asmtron commented May 24, 2019 •

edited

Loading

blb4github commented May 24, 2019 •

edited

Loading

IlFenomeno9 commented May 30, 2019 •

edited

Loading

JaWaRo commented May 30, 2019 •

edited

Loading

mer30hamid commented Jun 5, 2019 •

edited

Loading

jwalkerbg commented Feb 18, 2020 •

edited

Loading

graphixillusion commented Feb 21, 2020 •

edited

Loading

ner00 commented Jun 10, 2020 •

edited

Loading

MarkTycoon commented Oct 25, 2020 •

edited

Loading