Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

add 5.12 branch #10

Closed
pdp7 opened this issue May 5, 2021 · 1 comment
Closed

add 5.12 branch #10

pdp7 opened this issue May 5, 2021 · 1 comment

Comments

@pdp7
Copy link
Collaborator

pdp7 commented May 5, 2021

Add Linux 5.12 branch created by @esmil to this repo
@pdp7
Copy link
Collaborator Author

pdp7 commented May 7, 2021

closed, use #9

@pdp7 pdp7 closed this as completed May 7, 2021
esmil pushed a commit that referenced this issue May 30, 2021
@ctmarinas
arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
e690124 
When we added KFENCE support for arm64, we intended that it would
force the entire linear map to be mapped at page granularity, but we
only enforced this in arch_add_memory() and not in map_mem(), so
memory mapped at boot time can be mapped at a larger granularity.

When booting a kernel with KFENCE=y and RODATA_FULL=n, this results in
the following WARNING at boot:

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at mm/memory.c:2462 apply_to_pmd_range+0xec/0x190
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc1+ #10
[    0.000000] Hardware name: linux,dummy-virt (DT)
[    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--)
[    0.000000] pc : apply_to_pmd_range+0xec/0x190
[    0.000000] lr : __apply_to_page_range+0x94/0x170
[    0.000000] sp : ffffffc010573e20
[    0.000000] x29: ffffffc010573e20 x28: ffffff801f400000 x27: ffffff801f401000
[    0.000000] x26: 0000000000000001 x25: ffffff801f400fff x24: ffffffc010573f28
[    0.000000] x23: ffffffc01002b710 x22: ffffffc0105fa450 x21: ffffffc010573ee4
[    0.000000] x20: ffffff801fffb7d0 x19: ffffff801f401000 x18: 00000000fffffffe
[    0.000000] x17: 000000000000003f x16: 000000000000000a x15: ffffffc01060b940
[    0.000000] x14: 0000000000000000 x13: 0098968000000000 x12: 0000000098968000
[    0.000000] x11: 0000000000000000 x10: 0000000098968000 x9 : 0000000000000001
[    0.000000] x8 : 0000000000000000 x7 : ffffffc010573ee4 x6 : 0000000000000001
[    0.000000] x5 : ffffffc010573f28 x4 : ffffffc01002b710 x3 : 0000000040000000
[    0.000000] x2 : ffffff801f5fffff x1 : 0000000000000001 x0 : 007800005f400705
[    0.000000] Call trace:
[    0.000000]  apply_to_pmd_range+0xec/0x190
[    0.000000]  __apply_to_page_range+0x94/0x170
[    0.000000]  apply_to_page_range+0x10/0x20
[    0.000000]  __change_memory_common+0x50/0xdc
[    0.000000]  set_memory_valid+0x30/0x40
[    0.000000]  kfence_init_pool+0x9c/0x16c
[    0.000000]  kfence_init+0x20/0x98
[    0.000000]  start_kernel+0x284/0x3f8

Fixes: 840b239 ("arm64, kfence: enable KFENCE for ARM64")
Cc: <[email protected]> # 5.12.x
Signed-off-by: Jisheng Zhang <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Acked-by: Marco Elver <[email protected]>
Tested-by: Marco Elver <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
esmil pushed a commit that referenced this issue Jun 6, 2021
@Manciukic @acmel
perf env: Fix memory leak of bpf_prog_info_linear member
67069a1 
ASan reported a memory leak caused by info_linear not being deallocated.

The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().

This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().

  $ sudo ./perf record -- sleep 5
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]

  =================================================================
  ==297735==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 7688 byte(s) in 19 object(s) allocated from:
      #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
      #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
      #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
      #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
      #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
      #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
      #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
      #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
      #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
      #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
      #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
      #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16

Signed-off-by: Riccardo Mancini <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil pushed a commit that referenced this issue Jul 20, 2021
@chaseyu @gregkh
f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem ins…
e472b27 
…tances

commit cad83c9 upstream.

As syzbot reported, there is an use-after-free issue during f2fs recovery:

Use-after-free write at 0xffff88823bc16040 (in kfence-#10):
 kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486
 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869
 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945
 mount_bdev+0x26c/0x3a0 fs/super.c:1367
 legacy_get_tree+0xea/0x180 fs/fs_context.c:592
 vfs_get_tree+0x86/0x270 fs/super.c:1497
 do_new_mount fs/namespace.c:2905 [inline]
 path_mount+0x196f/0x2be0 fs/namespace.c:3235
 do_mount fs/namespace.c:3248 [inline]
 __do_sys_mount fs/namespace.c:3456 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The root cause is multi f2fs filesystem instances can race on accessing
global fsync_entry_slab pointer, result in use-after-free issue of slab
cache, fixes to init/destroy this slab cache only once during module
init/destroy procedure to avoid this issue.

Reported-by: [email protected]
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil pushed a commit that referenced this issue Sep 20, 2021
@rfmvh @acmel
perf machine: Initialize srcline string member in add_location struct
57f0ff0 
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:

  # perf top --sort comm -g --ignore-callees=do_idle

terminates with:

  #0  0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
  #1  0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
  #2  0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
  #3  hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
  #4  0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
      sample_self=sample_self@entry=true) at util/hist.c:657
  #5  0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
      sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
  #6  0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
      at util/hist.c:1056
  #7  iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
  #8  0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
      at util/hist.c:1231
  #9  0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
      at builtin-top.c:842
  #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
  #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
  #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
  #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
  #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
  #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
  #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
  #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
  #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6

If you look at the frame #2, the code is:

488	 if (he->srcline) {
489          he->srcline = strdup(he->srcline);
490          if (he->srcline == NULL)
491              goto err_rawdata;
492	 }

If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.

Also, if you look at the commit 1fb7d06, it adds the srcline property
into the struct, but not initializing it everywhere needed.

Committer notes:

Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():

2181         if (al.sym != NULL) {
2182                 if (perf_hpp_list.parent && !*parent &&
2183                     symbol__match_regex(al.sym, &parent_regex))
2184                         *parent = al.sym;
2185                 else if (have_ignore_callees && root_al &&
2186                   symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187                         /* Treat this symbol as the root,
2188                            forgetting its callees. */
2189                         *root_al = al;
2190                         callchain_cursor_reset(cursor);
2191                 }
2192         }

And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:

1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212                          int max_stack_depth, void *arg)
1213 {
1214         int err, err2;
1215         struct map *alm = NULL;
1216
1217         if (al)
1218                 alm = map__get(al->map);
1219
1220         err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221                                         iter->evsel, al, max_stack_depth);
1222         if (err) {
1223                 map__put(alm);
1224                 return err;
1225         }
1226
1227         err = iter->ops->prepare_entry(iter, al);
1228         if (err)
1229                 goto out;
1230
1231         err = iter->ops->add_single_entry(iter, al);
1232         if (err)
1233                 goto out;
1234

That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:

        iter->ops->add_single_entry(iter, al);

will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!

Signed-off-by: Michael Petlan <[email protected]>
CC: Milian Wolff <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/[email protected]
Reported-by: Juri Lelli <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil pushed a commit that referenced this issue Sep 20, 2021
@captain5050 @acmel
libperf evsel: Make use of FD robust.
aba5dae 
FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.

  $ sudo gdb --args perf stat --iostat  list
  ...
  Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
  50      {
  (gdb) bt
   #0  perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
   #1  0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
      threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
   #2  0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
      at util/evsel.c:2045
   #3  0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
      at util/evsel.c:2065
   #4  0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
      config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
   #5  0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:833
   #6  0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:1048
   #7  0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
   #8  0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
      argv=0x7fffffffe4a0) at perf.c:313
   #9  0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
   #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
   #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
  ...
  (gdb) c
  Continuing.
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
  /bin/dmesg | grep -i perf may provide additional information.

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
  166                     if (FD(evsel, cpu, thread) >= 0)

v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
    backward.

Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil pushed a commit that referenced this issue Sep 24, 2021
@rfmvh @gregkh
perf machine: Initialize srcline string member in add_location struct
bef2db9 
commit 57f0ff0 upstream.

It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:

  # perf top --sort comm -g --ignore-callees=do_idle

terminates with:

  #0  0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
  #1  0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
  #2  0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
  #3  hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
  #4  0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
      sample_self=sample_self@entry=true) at util/hist.c:657
  #5  0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
      sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
  #6  0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
      at util/hist.c:1056
  #7  iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
  #8  0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
      at util/hist.c:1231
  #9  0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
      at builtin-top.c:842
  #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
  #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
  #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
  #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
  #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
  #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
  #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
  #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
  #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6

If you look at the frame #2, the code is:

488	 if (he->srcline) {
489          he->srcline = strdup(he->srcline);
490          if (he->srcline == NULL)
491              goto err_rawdata;
492	 }

If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.

Also, if you look at the commit 1fb7d06, it adds the srcline property
into the struct, but not initializing it everywhere needed.

Committer notes:

Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():

2181         if (al.sym != NULL) {
2182                 if (perf_hpp_list.parent && !*parent &&
2183                     symbol__match_regex(al.sym, &parent_regex))
2184                         *parent = al.sym;
2185                 else if (have_ignore_callees && root_al &&
2186                   symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187                         /* Treat this symbol as the root,
2188                            forgetting its callees. */
2189                         *root_al = al;
2190                         callchain_cursor_reset(cursor);
2191                 }
2192         }

And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:

1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212                          int max_stack_depth, void *arg)
1213 {
1214         int err, err2;
1215         struct map *alm = NULL;
1216
1217         if (al)
1218                 alm = map__get(al->map);
1219
1220         err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221                                         iter->evsel, al, max_stack_depth);
1222         if (err) {
1223                 map__put(alm);
1224                 return err;
1225         }
1226
1227         err = iter->ops->prepare_entry(iter, al);
1228         if (err)
1229                 goto out;
1230
1231         err = iter->ops->add_single_entry(iter, al);
1232         if (err)
1233                 goto out;
1234

That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:

        iter->ops->add_single_entry(iter, al);

will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!

Signed-off-by: Michael Petlan <[email protected]>
CC: Milian Wolff <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/[email protected]
Reported-by: Juri Lelli <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil pushed a commit that referenced this issue Jan 20, 2022
@bebarino @gregkh
remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
af8ad47 
commit fdc1223 upstream.

If the string passed into qcom_pil_info_store() isn't as long as
PIL_RELOC_NAME_LEN we'll try to copy the string assuming the length is
PIL_RELOC_NAME_LEN to the io space and go beyond the bounds of the
string. Let's only copy as many byes as the string is long, ignoring the
NUL terminator.

This fixes the following KASAN error:

 BUG: KASAN: global-out-of-bounds in __memcpy_toio+0x124/0x140
 Read of size 1 at addr ffffffd35086e386 by task rmtfs/2392

 CPU: 2 PID: 2392 Comm: rmtfs Tainted: G        W         5.16.0-rc1-lockdep+ #10
 Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
 Call trace:
  dump_backtrace+0x0/0x410
  show_stack+0x24/0x30
  dump_stack_lvl+0x7c/0xa0
  print_address_description+0x78/0x2bc
  kasan_report+0x160/0x1a0
  __asan_report_load1_noabort+0x44/0x50
  __memcpy_toio+0x124/0x140
  qcom_pil_info_store+0x298/0x358 [qcom_pil_info]
  q6v5_start+0xdf0/0x12e0 [qcom_q6v5_mss]
  rproc_start+0x178/0x3a0
  rproc_boot+0x5f0/0xb90
  state_store+0x78/0x1bc
  dev_attr_store+0x70/0x90
  sysfs_kf_write+0xf4/0x118
  kernfs_fop_write_iter+0x208/0x300
  vfs_write+0x55c/0x804
  ksys_pwrite64+0xc8/0x134
  __arm64_compat_sys_aarch32_pwrite64+0xc4/0xdc
  invoke_syscall+0x78/0x20c
  el0_svc_common+0x11c/0x1f0
  do_el0_svc_compat+0x50/0x60
  el0_svc_compat+0x5c/0xec
  el0t_32_sync_handler+0xc0/0xf0
  el0t_32_sync+0x1a4/0x1a8

 The buggy address belongs to the variable:
  .str.59+0x6/0xffffffffffffec80 [qcom_q6v5_mss]

 Memory state around the buggy address:
  ffffffd35086e280: 00 00 00 00 02 f9 f9 f9 f9 f9 f9 f9 00 00 00 00
  ffffffd35086e300: 00 02 f9 f9 f9 f9 f9 f9 00 00 00 06 f9 f9 f9 f9
 >ffffffd35086e380: 06 f9 f9 f9 05 f9 f9 f9 00 00 00 00 00 06 f9 f9
                    ^
  ffffffd35086e400: f9 f9 f9 f9 01 f9 f9 f9 04 f9 f9 f9 00 00 01 f9
  ffffffd35086e480: f9 f9 f9 f9 00 00 00 00 00 00 00 01 f9 f9 f9 f9

Fixes: 549b67d ("remoteproc: qcom: Introduce helper to store pil info in IMEM")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil pushed a commit that referenced this issue Jan 27, 2022
@gregkh
ath11k: Avoid false DEADLOCK warning reported by lockdep
645a01a 
[ Upstream commit 767c94c ]

With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:

[  166.059415] ============================================
[  166.059416] WARNING: possible recursive locking detected
[  166.059418] 5.15.0-wt-ath+ #10 Tainted: G        W  O
[  166.059420] --------------------------------------------
[  166.059421] kworker/0:2/116 is trying to acquire lock:
[  166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059440]
               but task is already holding lock:
[  166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059491]
               other info that might help us debug this:
[  166.059492]  Possible unsafe locking scenario:

[  166.059493]        CPU0
[  166.059494]        ----
[  166.059495]   lock(&srng->lock);
[  166.059498]   lock(&srng->lock);
[  166.059500]
                *** DEADLOCK ***

[  166.059501]  May be due to missing lock nesting notation

[  166.059502] 3 locks held by kworker/0:2/116:
[  166.059504]  #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059511]  #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059517]  #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059532]
               stack backtrace:
[  166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G        W  O      5.15.0-wt-ath+ #10
[  166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[  166.059539] Workqueue: events free_obj_work
[  166.059543] Call Trace:
[  166.059545]  <IRQ>
[  166.059547]  dump_stack_lvl+0x56/0x7b
[  166.059552]  __lock_acquire+0xb9a/0x1a50
[  166.059556]  lock_acquire+0x1e2/0x330
[  166.059560]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059571]  _raw_spin_lock_bh+0x33/0x70
[  166.059574]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059584]  ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059594]  ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[  166.059605]  ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[  166.059618]  ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[  166.059632]  ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059643]  ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059655]  ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[  166.059659]  __napi_poll+0x28/0x230
[  166.059664]  net_rx_action+0x285/0x310
[  166.059668]  __do_softirq+0xe6/0x4d2
[  166.059672]  irq_exit_rcu+0xd2/0xf0
[  166.059675]  common_interrupt+0xa5/0xc0
[  166.059678]  </IRQ>
[  166.059679]  <TASK>
[  166.059680]  asm_common_interrupt+0x1e/0x40
[  166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[  166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[  166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[  166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[  166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[  166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[  166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[  166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[  166.059704]  free_debug_processing+0x257/0x3d0
[  166.059708]  ? free_obj_work+0x1f5/0x250
[  166.059712]  __slab_free+0x374/0x5a0
[  166.059718]  ? kmem_cache_free+0x2e1/0x370
[  166.059721]  ? free_obj_work+0x1f5/0x250
[  166.059724]  kmem_cache_free+0x2e1/0x370
[  166.059727]  free_obj_work+0x1f5/0x250
[  166.059731]  process_one_work+0x28b/0x660
[  166.059735]  ? process_one_work+0x660/0x660
[  166.059738]  worker_thread+0x37/0x390
[  166.059741]  ? process_one_work+0x660/0x660
[  166.059743]  kthread+0x176/0x1a0
[  166.059746]  ? set_kthread_struct+0x40/0x40
[  166.059749]  ret_from_fork+0x22/0x30
[  166.059754]  </TASK>

Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.

On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.

Fix it by assigning separate lock class key for each srng->lock.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Mar 7, 2022
@suresh2514 @davem330
net-sysfs: add check for netdevice being present to speed_show
4224cfd 
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
esmil pushed a commit that referenced this issue Mar 16, 2022
@suresh2514 @gregkh
net-sysfs: add check for netdevice being present to speed_show
3a79f38 
[ Upstream commit 4224cfd ]

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Apr 19, 2022
@mpe @gregkh
powerpc/pseries: Fix use after free in remove_phb_dynamic()
895ca4a 
[ Upstream commit fe2640b ]

In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.

If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.

This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:

  PID: 7574   TASK: c0000000d492cb80  CPU: 13  COMMAND: "drmgr"
   #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc
   #1 [c0000000e4f075d0] oops_end at c000000000029608
   #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4
   #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8
   #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30
   Data SLB Access [380] exception frame:
   R0:  c000000000167250    R1:  c0000000e4f07a00    R2:  c000000002a46100
   R3:  c000000002b39ce8    R4:  00000000000000c0    R5:  00000000000000a9
   R6:  3894674d000000c0    R7:  0000000000000000    R8:  00000000000000ff
   R9:  0000000000000100    R10: 6b6b6b6b6b6b6b6b    R11: 0000000000008000
   R12: c00000000023da80    R13: c0000009ffd38b00    R14: 0000000000000000
   R15: 000000011c87f0f0    R16: 0000000000000006    R17: 0000000000000003
   R18: 0000000000000002    R19: 0000000000000004    R20: 0000000000000005
   R21: 000000011c87ede8    R22: 000000011c87c5a8    R23: 000000011c87d3a0
   R24: 0000000000000000    R25: 0000000000000001    R26: c0000000e4f07cc8
   R27: c00000004d1cc400    R28: c0080000031d00e8    R29: c00000004d23d800
   R30: c00000004d1d2400    R31: c00000004d1d2540
   NIP: c000000000167258    MSR: 8000000000009033    OR3: c000000000e9f474
   CTR: 0000000000000000    LR:  c000000000167250    XER: 0000000020040003
   CCR: 0000000024088420    MQ:  0000000000000000    DAR: 6b6b6b6b6b6b6ba3
   DSISR: c0000000e4f07920     Syscall Result: fffffffffffffff2
   [NIP  : release_resource+56]
   [LR   : release_resource+48]
   #5 [c0000000e4f07a00] release_resource at c000000000167258  (unreliable)
   #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648
   #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io]
   #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io]
   #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c
  #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504
  #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868
  #12 [c0000000e4f07c70] new_sync_write at c00000000054339c
  #13 [c0000000e4f07d10] vfs_write at c000000000546624
  #14 [c0000000e4f07d60] ksys_write at c0000000005469f4
  #15 [c0000000e4f07db0] system_call_exception at c000000000030840
  #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168

To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.

Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)")
Reported-by: David Dai <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Tested-by: Sachin Sant <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Apr 26, 2022
@pcacjr
cifs: fix NULL ptr dereference in refresh_mounts()
41f1008 
Either mount(2) or automount might not have server->origin_fullpath
set yet while refresh_cache_worker() is attempting to refresh DFS
referrals.  Add missing NULL check and locking around it.

This fixes bellow crash:

[ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10
[ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.284990] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.285625] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.286683] Call Trace:
[ 1070.286890]  <TASK>
[ 1070.287070]  refresh_cache_worker+0x895/0xd20 [cifs]
[ 1070.287475]  ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs]
[ 1070.287905]  ? __lock_acquire+0xcd1/0x6960
[ 1070.288247]  ? is_dynamic_key+0x1a0/0x1a0
[ 1070.288591]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 1070.289012]  ? lock_downgrade+0x6f0/0x6f0
[ 1070.289318]  process_one_work+0x7bd/0x12d0
[ 1070.289637]  ? worker_thread+0x160/0xec0
[ 1070.289970]  ? pwq_dec_nr_in_flight+0x230/0x230
[ 1070.290318]  ? _raw_spin_lock_irq+0x5e/0x90
[ 1070.290619]  worker_thread+0x5ac/0xec0
[ 1070.290891]  ? process_one_work+0x12d0/0x12d0
[ 1070.291199]  kthread+0x2a5/0x350
[ 1070.291430]  ? kthread_complete_and_exit+0x20/0x20
[ 1070.291770]  ret_from_fork+0x22/0x30
[ 1070.292050]  </TASK>
[ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4
[ 1070.292765] ---[ end trace 0000000000000000 ]---
[ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.302645] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.303462] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.305004] Kernel panic - not syncing: Fatal exception
[ 1070.305711] Kernel Offset: disabled
[ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Cc: [email protected]
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
esmil pushed a commit that referenced this issue Apr 27, 2022
@pcacjr @gregkh
cifs: fix NULL ptr dereference in refresh_mounts()
8d59b66 
commit 41f1008 upstream.

Either mount(2) or automount might not have server->origin_fullpath
set yet while refresh_cache_worker() is attempting to refresh DFS
referrals.  Add missing NULL check and locking around it.

This fixes bellow crash:

[ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10
[ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.284990] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.285625] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.286683] Call Trace:
[ 1070.286890]  <TASK>
[ 1070.287070]  refresh_cache_worker+0x895/0xd20 [cifs]
[ 1070.287475]  ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs]
[ 1070.287905]  ? __lock_acquire+0xcd1/0x6960
[ 1070.288247]  ? is_dynamic_key+0x1a0/0x1a0
[ 1070.288591]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 1070.289012]  ? lock_downgrade+0x6f0/0x6f0
[ 1070.289318]  process_one_work+0x7bd/0x12d0
[ 1070.289637]  ? worker_thread+0x160/0xec0
[ 1070.289970]  ? pwq_dec_nr_in_flight+0x230/0x230
[ 1070.290318]  ? _raw_spin_lock_irq+0x5e/0x90
[ 1070.290619]  worker_thread+0x5ac/0xec0
[ 1070.290891]  ? process_one_work+0x12d0/0x12d0
[ 1070.291199]  kthread+0x2a5/0x350
[ 1070.291430]  ? kthread_complete_and_exit+0x20/0x20
[ 1070.291770]  ret_from_fork+0x22/0x30
[ 1070.292050]  </TASK>
[ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4
[ 1070.292765] ---[ end trace 0000000000000000 ]---
[ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.302645] FS:  0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.303462] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.305004] Kernel panic - not syncing: Fatal exception
[ 1070.305711] Kernel Offset: disabled
[ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]---

Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Cc: [email protected]
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil pushed a commit that referenced this issue May 23, 2022
@kubalewski @anguy11
ice: fix crash when writing timestamp on RX rings
4503cc7 
Do not allow to write timestamps on RX rings if PF is being configured.
When PF is being configured RX rings can be freed or rebuilt. If at the
same time timestamps are updated, the kernel will crash by dereferencing
null RX ring pointer.

PID: 1449   TASK: ff187d28ed658040  CPU: 34  COMMAND: "ice-ptp-0000:51"
 #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be
 #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d
 #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd
 #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54
 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4
 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c
 #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4
 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e
    [exception RIP: ice_ptp_update_cached_phctime+91]
    RIP: ffffffffc076db8b  RSP: ff1966a94a713e98  RFLAGS: 00010246
    RAX: 16e3db9c6b7ccae4  RBX: ff187d269dd3c180  RCX: ff187d269cd4d018
    RDX: 0000000000000000  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ff187d269cfcc644   R8: ff187d339b9641b0   R9: 0000000000000000
    R10: 0000000000000002  R11: 0000000000000000  R12: ff187d269cfcc648
    R13: ffffffff9f128784  R14: ffffffff9d101b70  R15: ff187d269cfcc640
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice]
 #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b
 #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d
 #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f

Fixes: 77a7811 ("ice: enable receive hardware timestamping")
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Reviewed-by: Michal Schmidt <[email protected]>
Tested-by: Dave Cain <[email protected]>
Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
esmil pushed a commit that referenced this issue Jun 1, 2022
@kubalewski @gregkh
ice: fix crash when writing timestamp on RX rings
e835098 
[ Upstream commit 4503cc7 ]

Do not allow to write timestamps on RX rings if PF is being configured.
When PF is being configured RX rings can be freed or rebuilt. If at the
same time timestamps are updated, the kernel will crash by dereferencing
null RX ring pointer.

PID: 1449   TASK: ff187d28ed658040  CPU: 34  COMMAND: "ice-ptp-0000:51"
 #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be
 #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d
 #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd
 #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54
 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4
 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c
 #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4
 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e
    [exception RIP: ice_ptp_update_cached_phctime+91]
    RIP: ffffffffc076db8b  RSP: ff1966a94a713e98  RFLAGS: 00010246
    RAX: 16e3db9c6b7ccae4  RBX: ff187d269dd3c180  RCX: ff187d269cd4d018
    RDX: 0000000000000000  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ff187d269cfcc644   R8: ff187d339b9641b0   R9: 0000000000000000
    R10: 0000000000000002  R11: 0000000000000000  R12: ff187d269cfcc648
    R13: ffffffff9f128784  R14: ffffffff9d101b70  R15: ff187d269cfcc640
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice]
 #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b
 #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d
 #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f

Fixes: 77a7811 ("ice: enable receive hardware timestamping")
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Reviewed-by: Michal Schmidt <[email protected]>
Tested-by: Dave Cain <[email protected]>
Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Jun 11, 2022
@dhowells @gregkh
rxrpc: Fix locking issue
79f9a73 
[ Upstream commit ad25f5c ]

There's a locking issue with the per-netns list of calls in rxrpc.  The
pieces of code that add and remove a call from the list use write_lock()
and the calls procfile uses read_lock() to access it.  However, the timer
callback function may trigger a removal by trying to queue a call for
processing and finding that it's already queued - at which point it has a
spare refcount that it has to do something with.  Unfortunately, if it puts
the call and this reduces the refcount to 0, the call will be removed from
the list.  Unfortunately, since the _bh variants of the locking functions
aren't used, this can deadlock.

================================
WARNING: inconsistent lock state
5.18.0-rc3-build4+ #10 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b
{SOFTIRQ-ON-W} state was registered at:
...
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&rxnet->call_lock);
  <Interrupt>
    lock(&rxnet->call_lock);

 *** DEADLOCK ***

1 lock held by ksoftirqd/2/25:
 #0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d

Changes
=======
ver #2)
 - Changed to using list_next_rcu() rather than rcu_dereference() directly.

Fixes: 17926a7 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Jun 11, 2022
@gregkh
module: fix [e_shstrndx].sh_size=0 OOB access
45a7641 
[ Upstream commit 391e982 ]

It is trivial to craft a module to trigger OOB access in this line:

	if (info->secstrings[strhdr->sh_size - 1] != '\0') {

BUG: unable to handle page fault for address: ffffc90000aa0fff
PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:load_module+0x19b/0x2391

Fixes: ec2a295 ("module: harden ELF info handling")
Signed-off-by: Alexey Dobriyan <[email protected]>
[rebased patch onto modules-next]
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Jun 11, 2022
@gregkh
tty: fix deadlock caused by calling printk() under tty_port->lock
0bcf449 
[ Upstream commit 6b9dbed ]

pty_write() invokes kmalloc() which may invoke a normal printk() to print
failure message.  This can cause a deadlock in the scenario reported by
syz-bot below:

       CPU0              CPU1                    CPU2
       ----              ----                    ----
                         lock(console_owner);
                                                 lock(&port_lock_key);
  lock(&port->lock);
                         lock(&port_lock_key);
                                                 lock(&port->lock);
  lock(console_owner);

As commit dbdda84 ("printk: Add console owner and waiter logic to
load balance console writes") said, such deadlock can be prevented by
using printk_deferred() in kmalloc() (which is invoked in the section
guarded by the port->lock).  But there are too many printk() on the
kmalloc() path, and kmalloc() can be called from anywhere, so changing
printk() to printk_deferred() is too complicated and inelegant.

Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so
that printk() will not be called, and this deadlock problem can be
avoided.

Syzbot reported the following lockdep error:

======================================================
WARNING: possible circular locking dependency detected
5.4.143-00237-g08ccc19a-dirty #10 Not tainted
------------------------------------------------------
syz-executor.4/29420 is trying to acquire lock:
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline]
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023

but task is already holding lock:
ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&port->lock){-.-.}-{2:2}:
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
       tty_port_tty_get drivers/tty/tty_port.c:288 [inline]          		<-- lock(&port->lock);
       tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47
       serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767
       serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854
       serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] 	<-- lock(&port_lock_key);
       serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870
       serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126
       __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156
       [...]

-> #1 (&port_lock_key){-.-.}-{2:2}:
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
       serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198
										<-- lock(&port_lock_key);
       call_console_drivers kernel/printk/printk.c:1819 [inline]
       console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504
       vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024			<-- lock(console_owner);
       vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
       printk+0xba/0xed kernel/printk/printk.c:2084
       register_console+0x8b3/0xc10 kernel/printk/printk.c:2829
       univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681
       console_init+0x49d/0x6d3 kernel/printk/printk.c:2915
       start_kernel+0x5e9/0x879 init/main.c:713
       secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

-> #0 (console_owner){....}-{0:0}:
       [...]
       lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734
       console_trylock_spinning kernel/printk/printk.c:1773 [inline]		<-- lock(console_owner);
       vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023
       vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
       printk+0xba/0xed kernel/printk/printk.c:2084
       fail_dump lib/fault-inject.c:45 [inline]
       should_fail+0x67b/0x7c0 lib/fault-inject.c:144
       __should_failslab+0x152/0x1c0 mm/failslab.c:33
       should_failslab+0x5/0x10 mm/slab_common.c:1224
       slab_pre_alloc_hook mm/slab.h:468 [inline]
       slab_alloc_node mm/slub.c:2723 [inline]
       slab_alloc mm/slub.c:2807 [inline]
       __kmalloc+0x72/0x300 mm/slub.c:3871
       kmalloc include/linux/slab.h:582 [inline]
       tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175
       __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273
       tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318
       tty_insert_flip_string include/linux/tty_flip.h:37 [inline]
       pty_write+0x126/0x1f0 drivers/tty/pty.c:122				<-- lock(&port->lock);
       n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356
       do_tty_write drivers/tty/tty_io.c:961 [inline]
       tty_write+0x512/0x930 drivers/tty/tty_io.c:1045
       __vfs_write+0x76/0x100 fs/read_write.c:494
       [...]

other info that might help us debug this:

Chain exists of:
  console_owner --> &port_lock_key --> &port->lock

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
Signed-off-by: Qi Zheng <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Cc: Akinobu Mita <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Sep 7, 2022
@mfijalko @gregkh
ice: xsk: prohibit usage of non-balanced queue id
03a3f29 
[ Upstream commit 5a42f11 ]

Fix the following scenario:
1. ethtool -L $IFACE rx 8 tx 96
2. xdpsock -q 10 -t -z

Above refers to a case where user would like to attach XSK socket in
txonly mode at a queue id that does not have a corresponding Rx queue.
At this moment ice's XSK logic is tightly bound to act on a "queue pair",
e.g. both Tx and Rx queues at a given queue id are disabled/enabled and
both of them will get XSK pool assigned, which is broken for the presented
queue configuration. This results in the splat included at the bottom,
which is basically an OOB access to Rx ring array.

To fix this, allow using the ids only in scope of "combined" queues
reported by ethtool. However, logic should be rewritten to allow such
configurations later on, which would end up as a complete rewrite of the
control path, so let us go with this temporary fix.

[420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082
[420160.566359] #PF: supervisor read access in kernel mode
[420160.572657] #PF: error_code(0x0000) - not-present page
[420160.579002] PGD 0 P4D 0
[420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI
[420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G           OE     5.19.0-rc7+ #10
[420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420160.693211] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420160.703645] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420160.740707] PKRU: 55555554
[420160.745960] Call Trace:
[420160.750962]  <TASK>
[420160.755597]  ? kmalloc_large_node+0x79/0x90
[420160.762703]  ? __kmalloc_node+0x3f5/0x4b0
[420160.769341]  xp_assign_dev+0xfd/0x210
[420160.775661]  ? shmem_file_read_iter+0x29a/0x420
[420160.782896]  xsk_bind+0x152/0x490
[420160.788943]  __sys_bind+0xd0/0x100
[420160.795097]  ? exit_to_user_mode_prepare+0x20/0x120
[420160.802801]  __x64_sys_bind+0x16/0x20
[420160.809298]  do_syscall_64+0x38/0x90
[420160.815741]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[420160.823731] RIP: 0033:0x7fa86a0dd2fb
[420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48
[420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb
[420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003
[420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000
[420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0
[420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000
[420160.919817]  </TASK>
[420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice]
[420160.977576] CR2: 0000000000000082
[420160.985037] ---[ end trace 0000000000000000 ]---
[420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420161.201505] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420161.213628] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420161.257052] PKRU: 55555554

Fixes: 2d4238f ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <[email protected]>
Tested-by: George Kuruvinakunnel <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Sep 14, 2022
@gregkh
binder: fix UAF of ref->proc caused by race condition
603a47f 
commit a0e44c6 upstream.

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.

The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.

  ==================================================================
  BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
  Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590

  CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   dump_backtrace.part.0+0x1d0/0x1e0
   show_stack+0x18/0x70
   dump_stack_lvl+0x68/0x84
   print_report+0x2e4/0x61c
   kasan_report+0xa4/0x110
   kasan_check_range+0xfc/0x1a4
   __kasan_check_write+0x3c/0x50
   _raw_spin_lock+0xa8/0x150
   binder_deferred_func+0x5e0/0x9b0
   process_one_work+0x38c/0x5f0
   worker_thread+0x9c/0x694
   kthread+0x188/0x190
   ret_from_fork+0x10/0x20

Acked-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Carlos Llamas <[email protected]>
Cc: stable <[email protected]> # 4.14+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil pushed a commit that referenced this issue Oct 27, 2022
@gregkh
powerpc/kprobes: Fix null pointer reference in arch_prepare_kprobe()
4eac4f6 
[ Upstream commit 97f88a3 ]

I found a null pointer reference in arch_prepare_kprobe():

  # echo 'p cmdline_proc_show' > kprobe_events
  # echo 'p cmdline_proc_show+16' >> kprobe_events
  Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
  BUG: Kernel NULL pointer dereference on read at 0x00000000
  Faulting instruction address: 0xc000000000050bfc
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
  NIP:  c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
  REGS: c0000000348475b0 TRAP: 0300   Not tainted  (6.0.0-rc3-00007-gdcf8e5633e2e)
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 88002444  XER: 20040006
  CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
  ...
  NIP arch_prepare_kprobe+0x10c/0x2d0
  LR  arch_prepare_kprobe+0xfc/0x2d0
  Call Trace:
    0xc0000000012f77a0 (unreliable)
    register_kprobe+0x3c0/0x7a0
    __register_trace_kprobe+0x140/0x1a0
    __trace_kprobe_create+0x794/0x1040
    trace_probe_create+0xc4/0xe0
    create_or_delete_trace_kprobe+0x2c/0x80
    trace_parse_run_command+0xf0/0x210
    probes_write+0x20/0x40
    vfs_write+0xfc/0x450
    ksys_write+0x84/0x140
    system_call_exception+0x17c/0x3a0
    system_call_vectored_common+0xe8/0x278
  --- interrupt: 3000 at 0x7fffa5682de0
  NIP:  00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
  REGS: c000000034847e80 TRAP: 3000   Not tainted  (6.0.0-rc3-00007-gdcf8e5633e2e)
  MSR:  900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 44002408  XER: 00000000

The address being probed has some special:

  cmdline_proc_show: Probe based on ftrace
  cmdline_proc_show+16: Probe for the next instruction at the ftrace location

The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:

  ...
  prev = get_kprobe(p->addr - 1);
  preempt_enable_no_resched();
  if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
  ...

If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.

Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.

Fixes: b4657f7 ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <[email protected]>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Apr 1, 2023
@sassmann @gregkh
iavf: fix hang on reboot with ice
7a29799 
[ Upstream commit 4e264be ]

When a system with E810 with existing VFs gets rebooted the following
hang may be observed.

 Pid 1 is hung in iavf_remove(), part of a network driver:
 PID: 1        TASK: ffff965400e5a340  CPU: 24   COMMAND: "systemd-shutdow"
  #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
  #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
  #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
  starfive-tech#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
  starfive-tech#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
  starfive-tech#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
  starfive-tech#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
  starfive-tech#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
  starfive-tech#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
  starfive-tech#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
 starfive-tech#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
 starfive-tech#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
 starfive-tech#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
 starfive-tech#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
 starfive-tech#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
 starfive-tech#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
 starfive-tech#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
 starfive-tech#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
 starfive-tech#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
 starfive-tech#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
 starfive-tech#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
 starfive-tech#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
 starfive-tech#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
     RIP: 00007f1baa5c13d7  RSP: 00007fffbcc55a98  RFLAGS: 00000202
     RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f1baa5c13d7
     RDX: 0000000001234567  RSI: 0000000028121969  RDI: 00000000fee1dead
     RBP: 00007fffbcc55ca0   R8: 0000000000000000   R9: 00007fffbcc54e90
     R10: 00007fffbcc55050  R11: 0000000000000202  R12: 0000000000000005
     R13: 0000000000000000  R14: 00007fffbcc55af0  R15: 0000000000000000
     ORIG_RAX: 00000000000000a9  CS: 0033  SS: 002b

During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.

Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().

Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove")
Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <[email protected]>
Signed-off-by: Stefan Assmann <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
hal-feng pushed a commit that referenced this issue Apr 25, 2023
@sassmann @anguy11
iavf: fix hang on reboot with ice
4e264be 
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.

 Pid 1 is hung in iavf_remove(), part of a network driver:
 PID: 1        TASK: ffff965400e5a340  CPU: 24   COMMAND: "systemd-shutdow"
  #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
  #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
  #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
  #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
  #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
  #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
  #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
  #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
  #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
  #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
 #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
 #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
 #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
 #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
 #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
     RIP: 00007f1baa5c13d7  RSP: 00007fffbcc55a98  RFLAGS: 00000202
     RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f1baa5c13d7
     RDX: 0000000001234567  RSI: 0000000028121969  RDI: 00000000fee1dead
     RBP: 00007fffbcc55ca0   R8: 0000000000000000   R9: 00007fffbcc54e90
     R10: 00007fffbcc55050  R11: 0000000000000202  R12: 0000000000000005
     R13: 0000000000000000  R14: 00007fffbcc55af0  R15: 0000000000000000
     ORIG_RAX: 00000000000000a9  CS: 0033  SS: 002b

During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.

Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().

Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove")
Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <[email protected]>
Signed-off-by: Stefan Assmann <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue May 30, 2023
@tamird @gregkh
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
3a7a4aa 
[ Upstream commit 05bb016 ]

ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
  #1.2  0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f
  #1.1  0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f
  #1    0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f
  #2    0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d
  starfive-tech#3    0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d
  starfive-tech#4    0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
  starfive-tech#5    0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369
  starfive-tech#6    0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac
  starfive-tech#7    0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2
  starfive-tech#8    0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052
  starfive-tech#9    0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8
  starfive-tech#10   0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98
  starfive-tech#11   0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac
  starfive-tech#12   0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d
  starfive-tech#13   0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603

Add a simple check that avoids incrementing a pointer by zero, but
otherwise behaves as before. Note that our findings are against ACPICA
20221020, but the same code exists on master.

Link: acpica/acpica@770653e3
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Fishwaldo pushed a commit to Fishwaldo/Star64_linux that referenced this issue Jun 7, 2023
@tamird @Fishwaldo
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
1fa6841 
[ Upstream commit 05bb016 ]

ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
  #1.2  0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f
  #1.1  0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f
  #1    0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f
  #2    0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d
  #3    0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d
  #4    0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
  starfive-tech#5    0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369
  starfive-tech#6    0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac
  starfive-tech#7    0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2
  starfive-tech#8    0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052
  starfive-tech#9    0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8
  starfive-tech#10   0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98
  starfive-tech#11   0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac
  starfive-tech#12   0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d
  starfive-tech#13   0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603

Add a simple check that avoids incrementing a pointer by zero, but
otherwise behaves as before. Note that our findings are against ACPICA
20221020, but the same code exists on master.

Link: acpica/acpica@770653e3
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
hal-feng pushed a commit that referenced this issue Jun 13, 2023
net/mlx5e: Prevent encap offload when neigh update is running
37c3b9f 
The cited commit adds a compeletion to remove dependency on rtnl
lock. But it causes a deadlock for multiple encapsulations:

 crash> bt ffff8aece8a64000
 PID: 1514557  TASK: ffff8aece8a64000  CPU: 3    COMMAND: "tc"
  #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45
  #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418
  #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898
  #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8
  #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb
  #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core]
  #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core]
  #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core]
  #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core]
  #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core]
 #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core]
 #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core]
 #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8
 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower]
 #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower]
 #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047
 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31
 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853
 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835
 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27
 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245
 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482
 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a
 #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2
 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2
 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f
 #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8
 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c
 crash> bt 0xffff8aeb07544000
 PID: 1110766  TASK: ffff8aeb07544000  CPU: 0    COMMAND: "kworker/u20:9"
  #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45
  #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418
  #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88
  #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b
  #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core]
  #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core]
  #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core]
  #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c
  #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012
  #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d
 #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f

After the first encap is attached, flow will be added to encap
entry's flows list. If neigh update is running at this time, the
following encaps of the flow can't hold the encap_tbl_lock and
sleep. If neigh update thread is waiting for that flow's init_done,
deadlock happens.

Fix it by holding lock outside of the for loop. If neigh update is
running, prevent encap flows from offloading. Since the lock is held
outside of the for loop, concurrent creation of encap entries is not
allowed. So remove unnecessary wait_for_completion call for res_ready.

Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update")
Signed-off-by: Chris Mi <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
hal-feng pushed a commit that referenced this issue Jun 13, 2023
@chaudron @davem330
net: openvswitch: fix upcall counter access before allocation
de9df6c 
Currently, the per cpu upcall counters are allocated after the vport is
created and inserted into the system. This could lead to the datapath
accessing the counters before they are allocated resulting in a kernel
Oops.

Here is an example:

  PID: 59693    TASK: ffff0005f4f51500  CPU: 0    COMMAND: "ovs-vswitchd"
   #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4
   #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc
   #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60
   #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58
   #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388
   #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c
   #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68
   #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch]
   ...

  PID: 58682    TASK: ffff0005b2f0bf00  CPU: 0    COMMAND: "kworker/0:3"
   #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758
   #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994
   #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8
   #3 [ffff80000a5d3120] die at ffffb70f0628234c
   #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8
   #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4
   #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4
   #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710
   #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74
   #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac
  #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24
  #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc
  #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch]
  #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch]
  #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch]
  #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch]
  #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch]
  #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90

We moved the per cpu upcall counter allocation to the existing vport
alloc and free functions to solve this.

Fixes: 95637d9 ("net: openvswitch: release vport resources on failure")
Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: Eelco Chaudron <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
hal-feng pushed a commit that referenced this issue Jun 29, 2023
net/mlx5: Free IRQ rmap and notifier on kernel shutdown
314ded5 
The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.

On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.

To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.

[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.4.0-rc4+ #10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158]  <TASK>
[ 4497.507299]  ? free_irq+0x295/0x340
[ 4497.507522]  ? __warn+0x7c/0x130
[ 4497.507740]  ? free_irq+0x295/0x340
[ 4497.507963]  ? report_bug+0x171/0x1a0
[ 4497.508197]  ? handle_bug+0x3c/0x70
[ 4497.508417]  ? exc_invalid_op+0x17/0x70
[ 4497.508662]  ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926]  ? free_irq+0x295/0x340
[ 4497.509146]  mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421]  mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714]  mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984]  shutdown+0x7b/0x100
[ 4497.510184]  pci_device_shutdown+0x30/0x60
[ 4497.510440]  device_shutdown+0x14d/0x240
[ 4497.510698]  kernel_power_off+0x30/0x70
[ 4497.510938]  process_one_work+0x1e6/0x3e0
[ 4497.511183]  worker_thread+0x49/0x3b0
[ 4497.511407]  ? __pfx_worker_thread+0x10/0x10
[ 4497.511679]  kthread+0xe0/0x110
[ 4497.511879]  ? __pfx_kthread+0x10/0x10
[ 4497.512114]  ret_from_fork+0x29/0x50
[ 4497.512342]  </TASK>

Fixes: 9c2d080 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Sep 22, 2023
@gregkh
net/mlx5: Free IRQ rmap and notifier on kernel shutdown
8eea0af 
commit 314ded5 upstream.

The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.

On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.

To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.

[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.4.0-rc4+ starfive-tech#10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158]  <TASK>
[ 4497.507299]  ? free_irq+0x295/0x340
[ 4497.507522]  ? __warn+0x7c/0x130
[ 4497.507740]  ? free_irq+0x295/0x340
[ 4497.507963]  ? report_bug+0x171/0x1a0
[ 4497.508197]  ? handle_bug+0x3c/0x70
[ 4497.508417]  ? exc_invalid_op+0x17/0x70
[ 4497.508662]  ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926]  ? free_irq+0x295/0x340
[ 4497.509146]  mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421]  mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714]  mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984]  shutdown+0x7b/0x100
[ 4497.510184]  pci_device_shutdown+0x30/0x60
[ 4497.510440]  device_shutdown+0x14d/0x240
[ 4497.510698]  kernel_power_off+0x30/0x70
[ 4497.510938]  process_one_work+0x1e6/0x3e0
[ 4497.511183]  worker_thread+0x49/0x3b0
[ 4497.511407]  ? __pfx_worker_thread+0x10/0x10
[ 4497.511679]  kthread+0xe0/0x110
[ 4497.511879]  ? __pfx_kthread+0x10/0x10
[ 4497.512114]  ret_from_fork+0x29/0x50
[ 4497.512342]  </TASK>

Fixes: 9c2d080 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Mathieu Tortuyaux <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Sep 22, 2023
@acmel @gregkh
perf trace: Really free the evsel->priv area
c3bc668 
[ Upstream commit 7962ef1 ]

In 3cb4d5e ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.

Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.

Also use the pre-existing evsel_trace__delete() function.

This resolves these leaks, detected with:

  $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin

  =================================================================
  ==481565==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      starfive-tech#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      starfive-tech#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      starfive-tech#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      starfive-tech#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
      starfive-tech#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      starfive-tech#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      starfive-tech#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      starfive-tech#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      starfive-tech#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      starfive-tech#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      starfive-tech#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      starfive-tech#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      starfive-tech#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      starfive-tech#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      starfive-tech#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
      starfive-tech#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      starfive-tech#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      starfive-tech#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      starfive-tech#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      starfive-tech#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      starfive-tech#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      starfive-tech#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
  [root@quaco ~]#

With this we plug all leaks with "perf trace sleep 1".

Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Sep 22, 2023
@gregkh
net/mlx5: Free IRQ rmap and notifier on kernel shutdown
3375186 
commit 314ded5 upstream.

The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.

On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.

To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.

[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.4.0-rc4+ starfive-tech#10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158]  <TASK>
[ 4497.507299]  ? free_irq+0x295/0x340
[ 4497.507522]  ? __warn+0x7c/0x130
[ 4497.507740]  ? free_irq+0x295/0x340
[ 4497.507963]  ? report_bug+0x171/0x1a0
[ 4497.508197]  ? handle_bug+0x3c/0x70
[ 4497.508417]  ? exc_invalid_op+0x17/0x70
[ 4497.508662]  ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926]  ? free_irq+0x295/0x340
[ 4497.509146]  mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421]  mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714]  mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984]  shutdown+0x7b/0x100
[ 4497.510184]  pci_device_shutdown+0x30/0x60
[ 4497.510440]  device_shutdown+0x14d/0x240
[ 4497.510698]  kernel_power_off+0x30/0x70
[ 4497.510938]  process_one_work+0x1e6/0x3e0
[ 4497.511183]  worker_thread+0x49/0x3b0
[ 4497.511407]  ? __pfx_worker_thread+0x10/0x10
[ 4497.511679]  kthread+0xe0/0x110
[ 4497.511879]  ? __pfx_kthread+0x10/0x10
[ 4497.512114]  ret_from_fork+0x29/0x50
[ 4497.512342]  </TASK>

Fixes: 9c2d080 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Mathieu Tortuyaux <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Sep 23, 2023
@biger410 @gregkh
scsi: megaraid_sas: Fix deadlock on firmware crashdump
72a2269 
commit 0b0747d upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   starfive-tech#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   starfive-tech#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   starfive-tech#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   starfive-tech#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   starfive-tech#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   starfive-tech#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   starfive-tech#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   starfive-tech#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   starfive-tech#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   starfive-tech#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   starfive-tech#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   starfive-tech#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   starfive-tech#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   starfive-tech#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   starfive-tech#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   starfive-tech#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   starfive-tech#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   starfive-tech#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   starfive-tech#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   starfive-tech#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   starfive-tech#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   starfive-tech#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   starfive-tech#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   starfive-tech#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   starfive-tech#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   starfive-tech#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Cc: [email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Sep 23, 2023
@biger410 @gregkh
scsi: megaraid_sas: Fix deadlock on firmware crashdump
c2cb422 
commit 0b0747d upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   starfive-tech#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   starfive-tech#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   starfive-tech#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   starfive-tech#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   starfive-tech#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   starfive-tech#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   starfive-tech#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   starfive-tech#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   starfive-tech#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   starfive-tech#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   starfive-tech#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   starfive-tech#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   starfive-tech#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   starfive-tech#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   starfive-tech#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   starfive-tech#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   starfive-tech#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   starfive-tech#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   starfive-tech#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   starfive-tech#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   starfive-tech#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   starfive-tech#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   starfive-tech#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   starfive-tech#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   starfive-tech#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   starfive-tech#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Cc: [email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Oct 13, 2023
@biger410 @gregkh
scsi: target: core: Fix deadlock due to recursive locking
b67adca 
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  starfive-tech#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  starfive-tech#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  starfive-tech#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  starfive-tech#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  starfive-tech#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  starfive-tech#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  starfive-tech#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 starfive-tech#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 starfive-tech#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 starfive-tech#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 starfive-tech#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 starfive-tech#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 starfive-tech#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 starfive-tech#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 starfive-tech#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 starfive-tech#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 starfive-tech#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 starfive-tech#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Oct 13, 2023
@biger410 @gregkh
scsi: target: core: Fix deadlock due to recursive locking
6c5d7f5 
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  starfive-tech#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  starfive-tech#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  starfive-tech#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  starfive-tech#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  starfive-tech#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  starfive-tech#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  starfive-tech#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 starfive-tech#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 starfive-tech#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 starfive-tech#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 starfive-tech#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 starfive-tech#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 starfive-tech#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 starfive-tech#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 starfive-tech#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 starfive-tech#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 starfive-tech#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 starfive-tech#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Oct 16, 2023
@captain5050 @namhyung
perf pmu: Ensure all alias variables are initialized
eaaebb0 
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
    #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
    #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
    #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
    #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
    #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
    #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
    #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
    #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
    #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
    #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
    #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
    #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
    #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
    #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
    #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
    #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
    #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
    #17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```

Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
esmil pushed a commit that referenced this issue Oct 16, 2023
@biger410 @martinkpetersen
scsi: target: core: Fix deadlock due to recursive locking
a154f5f 
The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
andyhu-stf pushed a commit that referenced this issue Nov 7, 2023
@mindachen1987
drm/i915: Disable tracing points on PREEMPT_RT
21d7bdc 
Luca Abeni reported this:
| BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003
| CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10
| Call Trace:
|  rt_spin_lock+0x3f/0x50
|  gen6_read32+0x45/0x1d0 [i915]
|  g4x_get_vblank_counter+0x36/0x40 [i915]
|  trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915]

The tracing events use trace_i915_pipe_update_start() among other events
use functions acquire spinlock_t locks which are transformed into
sleeping locks on PREEMPT_RT. A few trace points use
intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also
might acquire a sleeping locks on PREEMPT_RT.
At the time the arguments are evaluated within trace point, preemption
is disabled and so the locks must not be acquired on PREEMPT_RT.

Based on this I don't see any other way than disable trace points on
PREMPT_RT.

Reported-by: Luca Abeni <[email protected]>
Cc: Steven Rostedt <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
esmil pushed a commit that referenced this issue Nov 27, 2023
Merge branch 'verify-callbacks-as-if-they-are-called-unknown-number-o…
acb12c8 
…f-times'

Eduard Zingerman says:

====================
verify callbacks as if they are called unknown number of times

This series updates verifier logic for callback functions handling.
Current master simulates callback body execution exactly once,
which leads to verifier not detecting unsafe programs like below:

    static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx)
    {
        ctx->i = 0;
        return 0;
    }

    SEC("?raw_tp")
    int unsafe_on_zero_iter(void *unused)
    {
        struct num_context loop_ctx = { .i = 32 };
        __u8 choice_arr[2] = { 0, 1 };

        bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0);
        return choice_arr[loop_ctx.i];
    }

This was reported previously in [0].
The basic idea of the fix is to schedule callback entry state for
verification in env->head until some identical, previously visited
state in current DFS state traversal is found. Same logic as with open
coded iterators, and builds on top recent fixes [1] for those.

The series is structured as follows:
- patches #1,2,3 update strobemeta, xdp_synproxy selftests and
  bpf_loop_bench benchmark to allow convergence of the bpf_loop
  callback states;
- patches #4,5 just shuffle the code a bit;
- patch #6 is the main part of the series;
- patch #7 adds test cases for #6;
- patch #8 extend patch #6 with same speculative scalar widening
  logic, as used for open coded iterators;
- patch #9 adds test cases for #8;
- patch #10 extends patch #6 to track maximal number of callback
  executions specifically for bpf_loop();
- patch #11 adds test cases for #10.

Veristat results comparing this series to master+patches #1,2,3 using selftests
show the following difference:

File                       Program        States (A)  States (B)  States (DIFF)
-------------------------  -------------  ----------  ----------  -------------
bpf_loop_bench.bpf.o       benchmark               1           2  +1 (+100.00%)
pyperf600_bpf_loop.bpf.o   on_event              322         407  +85 (+26.40%)
strobemeta_bpf_loop.bpf.o  on_event              113         151  +38 (+33.63%)
xdp_synproxy_kern.bpf.o    syncookie_tc          341         291  -50 (-14.66%)
xdp_synproxy_kern.bpf.o    syncookie_xdp         344         301  -43 (-12.50%)

Veristat results comparing this series to master using Tetragon BPF
files [2] also show some differences.
States diff varies from +2% to +15% on 23 programs out of 186,
no new failures.

Changelog:
- V3 [5] -> V4, changes suggested by Andrii:
  - validate mark_chain_precision() result in patch #10;
  - renaming s/cumulative_callback_depth/callback_unroll_depth/.
- V2 [4] -> V3:
  - fixes in expected log messages for test cases:
    - callback_result_precise;
    - parent_callee_saved_reg_precise_with_callback;
    - parent_stack_slot_precise_with_callback;
  - renamings (suggested by Alexei):
    - s/callback_iter_depth/cumulative_callback_depth/
    - s/is_callback_iter_next/calls_callback/
    - s/mark_callback_iter_next/mark_calls_callback/
  - prepare_func_exit() updated to exit with -EFAULT when
    callee->in_callback_fn is true but calls_callback() is not true
    for callsite;
  - test case 'bpf_loop_iter_limit_nested' rewritten to use return
    value check instead of verifier log message checks
    (suggested by Alexei).
- V1 [3] -> V2, changes suggested by Andrii:
  - small changes for error handling code in __check_func_call();
  - callback body processing log is now matched in relevant
    verifier_subprog_precision.c tests;
  - R1 passed to bpf_loop() is now always marked as precise;
  - log level 2 message for bpf_loop() iteration termination instead of
    iteration depth messages;
  - __no_msg macro removed;
  - bpf_loop_iter_limit_nested updated to avoid using __no_msg;
  - commit message for patch #3 updated according to Alexei's request.

[0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
[1] https://lore.kernel.org/bpf/[email protected]/
[2] [email protected]:cilium/tetragon.git
[3] https://lore.kernel.org/bpf/[email protected]/T/#t
[4] https://lore.kernel.org/bpf/[email protected]/T/#t
[5] https://lore.kernel.org/bpf/[email protected]/T/#t
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Nov 29, 2023
@gregkh
tty: Fix uninit-value access in ppp_sync_receive()
4b3b254 
[ Upstream commit 7196398 ]

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
 ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591
 __alloc_pages_node include/linux/gfp.h:238 [inline]
 alloc_pages_node include/linux/gfp.h:261 [inline]
 __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691
 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722
 page_frag_alloc include/linux/gfp.h:322 [inline]
 __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728
 netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
 dev_alloc_skb include/linux/skbuff.h:3238 [inline]
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
 ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd starfive-tech#10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS
and PPP_UI. However, if the data length is 1 and the first byte is
PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking
PPP_UI. This patch resolves this issue by checking the data length.

Fixes: 1da177e ("Linux-2.6.12-rc2")
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Nov 29, 2023
@gregkh
tipc: Fix kernel-infoleak due to uninitialized TLV value
9ae8230 
[ Upstream commit fb317eb ]

KMSAN reported the following kernel-infoleak issue:

=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter net/core/datagram.c:532 [inline]
 __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420
 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 __sys_recvfrom+0x476/0x860 net/socket.c:2246
 __do_sys_recvfrom net/socket.c:2264 [inline]
 __se_sys_recvfrom net/socket.c:2260 [inline]
 __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523
 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline]
 tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170
 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324
 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545
 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x997/0xd60 net/socket.c:2588
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
 __sys_sendmsg net/socket.c:2671 [inline]
 __do_sys_sendmsg net/socket.c:2680 [inline]
 __se_sys_sendmsg net/socket.c:2678 [inline]
 __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 34-35 of 36 are uninitialized
Memory access of size 36 starts at ffff88802d464a00
Data copied to user address 00007ff55033c0a0

CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd starfive-tech#10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is
calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and
the length of TLV value passed as an argument, and aligns the result to a
multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes.

If the size of struct tlv_desc plus the length of TLV value is not aligned,
the current implementation leaves the remaining bytes uninitialized. This
is the cause of the above kernel-infoleak issue.

This patch resolves this issue by clearing data up to an aligned size.

Fixes: d0796d1 ("tipc: convert legacy nl bearer dump to nl compat")
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Nov 29, 2023
@captain5050 @gregkh
perf stat: Fix aggr mode initialization
550711e 
[ Upstream commit a84fbf2 ]

Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.

```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
    #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
    #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
    #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
    starfive-tech#3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
    starfive-tech#4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
    starfive-tech#5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
    starfive-tech#6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
    starfive-tech#7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
    starfive-tech#8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
    starfive-tech#9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
    starfive-tech#10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
    starfive-tech#11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
    starfive-tech#12 0x558265bb9389 in main tools/perf/perf.c:537:3
```

The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.

Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Nov 29, 2023
@gregkh
tty: Fix uninit-value access in ppp_sync_receive()
76bd428 
[ Upstream commit 7196398 ]

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
 ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591
 __alloc_pages_node include/linux/gfp.h:238 [inline]
 alloc_pages_node include/linux/gfp.h:261 [inline]
 __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691
 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722
 page_frag_alloc include/linux/gfp.h:322 [inline]
 __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728
 netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
 dev_alloc_skb include/linux/skbuff.h:3238 [inline]
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
 ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd starfive-tech#10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS
and PPP_UI. However, if the data length is 1 and the first byte is
PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking
PPP_UI. This patch resolves this issue by checking the data length.

Fixes: 1da177e ("Linux-2.6.12-rc2")
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Nov 29, 2023
@gregkh
tipc: Fix kernel-infoleak due to uninitialized TLV value
1e83edb 
[ Upstream commit fb317eb ]

KMSAN reported the following kernel-infoleak issue:

=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter net/core/datagram.c:532 [inline]
 __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420
 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 __sys_recvfrom+0x476/0x860 net/socket.c:2246
 __do_sys_recvfrom net/socket.c:2264 [inline]
 __se_sys_recvfrom net/socket.c:2260 [inline]
 __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523
 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline]
 tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170
 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324
 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545
 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x997/0xd60 net/socket.c:2588
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
 __sys_sendmsg net/socket.c:2671 [inline]
 __do_sys_sendmsg net/socket.c:2680 [inline]
 __se_sys_sendmsg net/socket.c:2678 [inline]
 __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 34-35 of 36 are uninitialized
Memory access of size 36 starts at ffff88802d464a00
Data copied to user address 00007ff55033c0a0

CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd starfive-tech#10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is
calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and
the length of TLV value passed as an argument, and aligns the result to a
multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes.

If the size of struct tlv_desc plus the length of TLV value is not aligned,
the current implementation leaves the remaining bytes uninitialized. This
is the cause of the above kernel-infoleak issue.

This patch resolves this issue by clearing data up to an aligned size.

Fixes: d0796d1 ("tipc: convert legacy nl bearer dump to nl compat")
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
esmil pushed a commit that referenced this issue Dec 11, 2023
@rleon
RDMA/core: Fix uninit-value access in ib_get_eth_speed()
0550d46 
KMSAN reported the following uninit-value access issue:

lo speed is unknown, defaulting to 1000
=====================================================
BUG: KMSAN: uninit-value in ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
BUG: KMSAN: uninit-value in ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
 ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
 ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
 siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203
 setup_port_data drivers/infiniband/core/device.c:848 [inline]
 setup_device drivers/infiniband/core/device.c:1244 [inline]
 ib_register_device+0x1589/0x1df0 drivers/infiniband/core/device.c:1383
 siw_device_register drivers/infiniband/sw/siw/siw_main.c:72 [inline]
 siw_newlink+0x129e/0x13d0 drivers/infiniband/sw/siw/siw_main.c:490
 nldev_newlink+0x8fd/0xa60 drivers/infiniband/core/nldev.c:1763
 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
 rdma_nl_rcv+0xe8a/0x1120 drivers/infiniband/core/netlink.c:259
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x997/0xd60 net/socket.c:2588
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
 __sys_sendmsg net/socket.c:2671 [inline]
 __do_sys_sendmsg net/socket.c:2680 [inline]
 __se_sys_sendmsg net/socket.c:2678 [inline]
 __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Local variable lksettings created at:
 ib_get_eth_speed+0x4b/0xaf0 drivers/infiniband/core/verbs.c:1974
 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
 siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203

CPU: 0 PID: 11257 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

If __ethtool_get_link_ksettings() fails, `netdev_speed` is set to the
default value, SPEED_1000. In this case, if `lanes` field of struct
ethtool_link_ksettings is not initialized, an uninitialized value is passed
to ib_get_width_and_speed(). This causes the above issue. This patch
resolves the issue by initializing `lanes` to 0.

Fixes: cb06b6b ("RDMA/core: Get IB width and speed from netdev")
Signed-off-by: Shigeru Yoshida <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
esmil pushed a commit that referenced this issue Dec 11, 2023
@jgunthorpe
RDMA/irdma: Avoid free the non-cqp_request scratch
e3e82fc 
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   #3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   #15 [ffff88aa841efb88] device_del at ffffffff82179d23
   #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   #20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: "Ismail, Mustafa" <[email protected]>
Signed-off-by: Shifeng Li <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Dec 15, 2023
@gregkh
RDMA/irdma: Avoid free the non-cqp_request scratch
0511a9c 
[ Upstream commit e3e82fc ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   starfive-tech#3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   starfive-tech#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   starfive-tech#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   starfive-tech#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   starfive-tech#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   starfive-tech#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   starfive-tech#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   starfive-tech#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   starfive-tech#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   starfive-tech#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   starfive-tech#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   starfive-tech#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   starfive-tech#15 [ffff88aa841efb88] device_del at ffffffff82179d23
   starfive-tech#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   starfive-tech#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   starfive-tech#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   starfive-tech#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   starfive-tech#20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   starfive-tech#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: "Ismail, Mustafa" <[email protected]>
Signed-off-by: Shifeng Li <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Dec 15, 2023
@gregkh
RDMA/irdma: Avoid free the non-cqp_request scratch
1ff5629 
[ Upstream commit e3e82fc ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   starfive-tech#3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   starfive-tech#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   starfive-tech#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   starfive-tech#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   starfive-tech#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   starfive-tech#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   starfive-tech#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   starfive-tech#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   starfive-tech#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   starfive-tech#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   starfive-tech#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   starfive-tech#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   starfive-tech#15 [ffff88aa841efb88] device_del at ffffffff82179d23
   starfive-tech#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   starfive-tech#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   starfive-tech#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   starfive-tech#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   starfive-tech#20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   starfive-tech#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: "Ismail, Mustafa" <[email protected]>
Signed-off-by: Shifeng Li <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Apr 29, 2024
@gregkh
tun: limit printing rate when illegal packet received by tun dev
a50dbec 
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 starfive-tech#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 starfive-tech#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 starfive-tech#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 starfive-tech#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 starfive-tech#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 starfive-tech#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 starfive-tech#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 starfive-tech#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 starfive-tech#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 starfive-tech#12 [ffffa65531497b68] printk at ffffffff89318306
 starfive-tech#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 starfive-tech#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 starfive-tech#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 starfive-tech#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 starfive-tech#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 starfive-tech#18 [ffffa65531497f10] kthread at ffffffff892d2e72
 starfive-tech#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Apr 29, 2024
@gregkh
tun: limit printing rate when illegal packet received by tun dev
62e27ef 
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 starfive-tech#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 starfive-tech#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 starfive-tech#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 starfive-tech#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 starfive-tech#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 starfive-tech#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 starfive-tech#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 starfive-tech#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 starfive-tech#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 starfive-tech#12 [ffffa65531497b68] printk at ffffffff89318306
 starfive-tech#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 starfive-tech#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 starfive-tech#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 starfive-tech#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 starfive-tech#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 starfive-tech#18 [ffffa65531497f10] kthread at ffffffff892d2e72
 starfive-tech#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Jun 15, 2024
@captain5050 @gregkh
perf ui browser: Don't save pointer to stack memory
598eb7d 
[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    #1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    #2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561
    starfive-tech#21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
orangecms pushed a commit to orangecms/linux-starfive that referenced this issue Jun 26, 2024
@captain5050 @gregkh
perf ui browser: Don't save pointer to stack memory
2f0d8e2 
[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    starfive-tech#1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    starfive-tech#2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561
    starfive-tech#21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
orangecms pushed a commit to orangecms/linux-starfive that referenced this issue Jun 26, 2024
@acmel @gregkh
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAM…
0effd15 
…PLES event"

commit 5b3cde1 upstream.

This reverts commit 7d1405c.

This causes segfaults in some cases, as reported by Milian:

  ```
  sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
  raw_syscalls:sys_enter ls
  ...
  [ perf record: Woken up 3 times to write data ]
  malloc(): invalid next size (unsorted)
  Aborted
  ```

  Backtrace with GDB + debuginfod:

  ```
  malloc(): invalid next size (unsorted)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
  no_tid=no_tid@entry=0) at pthread_kill.c:44
  Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
  44            return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
  (ret) : 0;
  (gdb) bt
  #0  __pthread_kill_implementation (threadid=<optimized out>,
  signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
  starfive-tech#1  0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
  signo=6) at pthread_kill.c:78
  starfive-tech#2  0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
  raise.c:26
  starfive-tech#3  0x00007ffff6e384c3 in __GI_abort () at abort.c:79
  starfive-tech#4  0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
  "%s\n") at ../sysdeps/posix/libc_fatal.c:132
  starfive-tech#5  0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
  "malloc(): invalid next size (unsorted)") at malloc.c:5772
  starfive-tech#6  0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
  <main_arena>, bytes=bytes@entry=368) at malloc.c:4081
  starfive-tech#7  0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
  elem_size=<optimized out>) at malloc.c:3754
  starfive-tech#8  0x000055555569bdb6 in perf_session.do_write_header ()
  starfive-tech#9  0x00005555555a373a in __cmd_record.constprop.0 ()
  starfive-tech#10 0x00005555555a6846 in cmd_record ()
  starfive-tech#11 0x000055555564db7f in run_builtin ()
  starfive-tech#12 0x000055555558ed77 in main ()
  ```

  Valgrind memcheck:
  ```
  ==45136== Invalid write of size 8
  ==45136==    at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
  ==45136==    by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
  ==45136== Syscall param write(buf) points to unaddressable byte(s)
  ==45136==    at 0x575953D: __libc_write (write.c:26)
  ==45136==    by 0x575953D: write (write.c:24)
  ==45136==    by 0x35761F: ion (in /usr/bin/perf)
  ==45136==    by 0x357778: writen (in /usr/bin/perf)
  ==45136==    by 0x1548F7: record__write (in /usr/bin/perf)
  ==45136==    by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
 -----

Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <[email protected]>
Tested-by: Milian Wolff <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected] # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
orangecms pushed a commit to orangecms/linux-starfive that referenced this issue Jun 26, 2024
@osandov @gregkh
btrfs: fix crash on racing fsync and size-extending write into prealloc
f4e5ed9 
commit 9d274c1 upstream.

We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():

  BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:2620!
  invalid opcode: 0000 [starfive-tech#1] PREEMPT SMP PTI
  CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 starfive-tech#6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
  RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]

With the following stack trace:

  #0  btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
  starfive-tech#1  btrfs_drop_extents (fs/btrfs/file.c:411:4)
  starfive-tech#2  log_one_extent (fs/btrfs/tree-log.c:4732:9)
  starfive-tech#3  btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
  starfive-tech#4  btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
  starfive-tech#5  btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
  starfive-tech#6  btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
  starfive-tech#7  btrfs_sync_file (fs/btrfs/file.c:1933:8)
  starfive-tech#8  vfs_fsync_range (fs/sync.c:188:9)
  starfive-tech#9  vfs_fsync (fs/sync.c:202:9)
  starfive-tech#10 do_fsync (fs/sync.c:212:9)
  starfive-tech#11 __do_sys_fdatasync (fs/sync.c:225:9)
  starfive-tech#12 __se_sys_fdatasync (fs/sync.c:223:1)
  starfive-tech#13 __x64_sys_fdatasync (fs/sync.c:223:1)
  starfive-tech#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
  starfive-tech#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
  starfive-tech#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)

So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().

This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:

  >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
  leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
  leaf 33439744 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
          item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
                  generation 7 transid 9 size 8192 nbytes 8473563889606862198
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 204 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417704.983333333 (2024-05-22 15:41:44)
                  mtime 1716417704.983333333 (2024-05-22 15:41:44)
                  otime 17592186044416.000000000 (559444-03-08 01:40:16)
          item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
                  index 195 namelen 3 name: 193
          item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 4096 ram 12288
                  extent compression 0 (none)
          item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 4096 nr 8192
          item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096
  ...

So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.

Here is the state of the filesystem tree at the time of the crash:

  >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
  >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
  >>> print_extent_buffer(nodes[0])
  leaf 30425088 level 0 items 184 generation 9 owner 5
  leaf 30425088 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
  	...
          item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
                  generation 7 transid 7 size 4096 nbytes 12288
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 6 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417703.220000000 (2024-05-22 15:41:43)
                  mtime 1716417703.220000000 (2024-05-22 15:41:43)
                  otime 1716417703.220000000 (2024-05-22 15:41:43)
          item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
                  index 195 namelen 3 name: 193
          item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 8192 ram 12288
                  extent compression 0 (none)
          item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096

Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.

btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.

If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.

This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:

- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
  prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
  the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
  to the log tree.
- An xattr is set on the file, which sets the
  BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
  extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
  calls copy_inode_items_to_log(), which calls
  btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
  filesystem tree. Since it starts before i_size, it skips it. Since it
  is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
  the prealloc extent to written and inserts the remaining prealloc part
  from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
  8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
  the log tree. Note that it overlaps with the 4k-12k prealloc extent
  that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
  extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
  adjusting the start of the 4k-12k prealloc extent in the log tree to
  8k.
- btrfs_set_item_key_safe() sees that there is already an extent
  starting at 8k in the log tree and calls BUG().

Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.

CC: [email protected] # 6.1+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Jul 5, 2024
@jankara @gregkh
ocfs2: fix DIO failure due to insufficient transaction credits
320273b 
commit be346c1 upstream.

The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  #1 __crash_kexec at ffffffff8c1338fa
  #2 panic at ffffffff8c1d69b9
  starfive-tech#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  starfive-tech#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  starfive-tech#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  starfive-tech#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  starfive-tech#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  starfive-tech#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  starfive-tech#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
starfive-tech#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
starfive-tech#11 dio_complete at ffffffff8c2b9fa7
starfive-tech#12 do_blockdev_direct_IO at ffffffff8c2bc09f
starfive-tech#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
starfive-tech#14 generic_file_direct_write at ffffffff8c1dcf14
starfive-tech#15 __generic_file_write_iter at ffffffff8c1dd07b
starfive-tech#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
starfive-tech#17 aio_write at ffffffff8c2cc72e
starfive-tech#18 kmem_cache_alloc at ffffffff8c248dde
starfive-tech#19 do_io_submit at ffffffff8c2ccada
starfive-tech#20 do_syscall_64 at ffffffff8c004984
starfive-tech#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Heming Zhao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Jul 5, 2024
@osandov @gregkh
btrfs: fix crash on racing fsync and size-extending write into prealloc
1ff2bd5 
commit 9d274c1 upstream.

We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():

  BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:2620!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 starfive-tech#6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
  RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]

With the following stack trace:

  #0  btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
  #1  btrfs_drop_extents (fs/btrfs/file.c:411:4)
  #2  log_one_extent (fs/btrfs/tree-log.c:4732:9)
  starfive-tech#3  btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
  starfive-tech#4  btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
  starfive-tech#5  btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
  starfive-tech#6  btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
  starfive-tech#7  btrfs_sync_file (fs/btrfs/file.c:1933:8)
  starfive-tech#8  vfs_fsync_range (fs/sync.c:188:9)
  starfive-tech#9  vfs_fsync (fs/sync.c:202:9)
  starfive-tech#10 do_fsync (fs/sync.c:212:9)
  starfive-tech#11 __do_sys_fdatasync (fs/sync.c:225:9)
  starfive-tech#12 __se_sys_fdatasync (fs/sync.c:223:1)
  starfive-tech#13 __x64_sys_fdatasync (fs/sync.c:223:1)
  starfive-tech#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
  starfive-tech#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
  starfive-tech#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)

So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().

This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:

  >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
  leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
  leaf 33439744 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
          item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
                  generation 7 transid 9 size 8192 nbytes 8473563889606862198
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 204 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417704.983333333 (2024-05-22 15:41:44)
                  mtime 1716417704.983333333 (2024-05-22 15:41:44)
                  otime 17592186044416.000000000 (559444-03-08 01:40:16)
          item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
                  index 195 namelen 3 name: 193
          item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 4096 ram 12288
                  extent compression 0 (none)
          item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 4096 nr 8192
          item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096
  ...

So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.

Here is the state of the filesystem tree at the time of the crash:

  >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
  >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
  >>> print_extent_buffer(nodes[0])
  leaf 30425088 level 0 items 184 generation 9 owner 5
  leaf 30425088 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
  	...
          item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
                  generation 7 transid 7 size 4096 nbytes 12288
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 6 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417703.220000000 (2024-05-22 15:41:43)
                  mtime 1716417703.220000000 (2024-05-22 15:41:43)
                  otime 1716417703.220000000 (2024-05-22 15:41:43)
          item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
                  index 195 namelen 3 name: 193
          item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 8192 ram 12288
                  extent compression 0 (none)
          item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096

Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.

btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.

If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.

This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:

- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
  prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
  the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
  to the log tree.
- An xattr is set on the file, which sets the
  BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
  extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
  calls copy_inode_items_to_log(), which calls
  btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
  filesystem tree. Since it starts before i_size, it skips it. Since it
  is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
  the prealloc extent to written and inserts the remaining prealloc part
  from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
  8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
  the log tree. Note that it overlaps with the 4k-12k prealloc extent
  that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
  extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
  adjusting the start of the 4k-12k prealloc extent in the log tree to
  8k.
- btrfs_set_item_key_safe() sees that there is already an extent
  starting at 8k in the log tree and calls BUG().

Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.

CC: [email protected] # 6.1+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
MichaIng pushed a commit to MichaIng/linux that referenced this issue Jul 5, 2024
@jankara @gregkh
ocfs2: fix DIO failure due to insufficient transaction credits
9ea2d1c 
commit be346c1 upstream.

The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  #1 __crash_kexec at ffffffff8c1338fa
  #2 panic at ffffffff8c1d69b9
  starfive-tech#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  starfive-tech#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  starfive-tech#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  starfive-tech#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  starfive-tech#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  starfive-tech#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  starfive-tech#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
starfive-tech#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
starfive-tech#11 dio_complete at ffffffff8c2b9fa7
starfive-tech#12 do_blockdev_direct_IO at ffffffff8c2bc09f
starfive-tech#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
starfive-tech#14 generic_file_direct_write at ffffffff8c1dcf14
starfive-tech#15 __generic_file_write_iter at ffffffff8c1dd07b
starfive-tech#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
starfive-tech#17 aio_write at ffffffff8c2cc72e
starfive-tech#18 kmem_cache_alloc at ffffffff8c248dde
starfive-tech#19 do_io_submit at ffffffff8c2ccada
starfive-tech#20 do_syscall_64 at ffffffff8c004984
starfive-tech#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Heming Zhao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
andyhu-stf pushed a commit that referenced this issue Oct 22, 2024
@andyhu-stf
drm/i915: Disable tracing points on PREEMPT_RT
bde971e 
Luca Abeni reported this:
| BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003
| CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10
| Call Trace:
|  rt_spin_lock+0x3f/0x50
|  gen6_read32+0x45/0x1d0 [i915]
|  g4x_get_vblank_counter+0x36/0x40 [i915]
|  trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915]

The tracing events use trace_i915_pipe_update_start() among other events
use functions acquire spinlock_t locks which are transformed into
sleeping locks on PREEMPT_RT. A few trace points use
intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also
might acquire a sleeping locks on PREEMPT_RT.
At the time the arguments are evaluated within trace point, preemption
is disabled and so the locks must not be acquired on PREEMPT_RT.

Based on this I don't see any other way than disable trace points on
PREMPT_RT.

Reported-by: Luca Abeni <[email protected]>
Cc: Steven Rostedt <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@pdp7