Skip to content

Spring Boot 3.4 Release Notes

Jump to bottom
Phillip Webb edited this page Nov 21, 2024 · 11 revisions

Upgrading from Spring Boot 3.3

RestClient and RestTemplate

Support for auto-configuring RestClient and RestTemplate to use Reactor Netty’s HttpClient or the JDK’s HttpClient has been added. In order of precedence, the supported clients are now:

  • Apache HTTP Components (HttpComponentsClientHttpRequestFactory)

  • Jetty Client (JettyClientHttpRequestFactory)

  • Reactor Netty HttpClient (ReactorClientHttpRequestFactory)

  • JDK HttpClient (JdkClientHttpRequestFactory)

  • Simple JDK HttpURLConnection (SimpleClientHttpRequestFactory)

Notably, if you don’t have an HTTP client library on the classpath, this will likely result in the use of JdkClientHttpRequestFactory where SimpleClientHttpRequestFactory would have been used previously. A particular client can be selected by setting spring.http.client.factory. Supported values are http-components, jetty, reactor, jdk, and simple.

All five clients will follow redirects by default. To disable this behavior, set spring.http.client.redirects to dont-follow.

Apache HTTP Components and Envoy

Apache HTTP Components have changed defaults in the HttpClient relating to HTTP/1.1 TLS upgrades. Most proxy servers handle upgrades without issue, however, you may encounter issues with Envoy or Istio.

If you need to restore previous behaviour, you can use the new ClientHttpRequestFactoryBuilder. Define a HttpComponentsClientHttpRequestFactoryBuilder and apply the following customization:

@Bean
public HttpComponentsClientHttpRequestFactoryBuilder httpComponentsClientHttpRequestFactoryBuilder() {
	return ClientHttpRequestFactoryBuilder.httpComponents()
			.withDefaultRequestConfigManagerCustomizer((builder) -> builder.setProtocolUpgradeEnabled(false));

Bean Validation of Configuration Properties

Previously, when a @ConfigurationProperties class annotated with @Validated was being validated using a Bean Validation implementation such as Hibernate Validator, validation of nested properties would be performed as they were bound, irrespective of the use of @Valid. In Spring Boot 3.4, validation now follows the behavior of the Bean Validation specification. Validation is performed from the @ConfigurationProperties-annoated class and only cascades down to nested properties where the corresponding field is annotated with @Valid.

When upgrading, inspect your @ConfigurationProperties classes with Bean Validation constraints. Add @Valid as necessary where you want the validation to cascade down to nested properties.

Bean-based Conditions

The behavior of @ConditionalOnBean and @ConditionalOnMissingBean has changed when used on a @Bean method and the annotation attribute is set. As before, both conditions will use the return type of the @Bean method as a default for the type to match. Previously, this default was not used if name, type, or value had been set. As of Spring Boot 3.4, this default will also not be used if annotation has been set. To restore the previous behavior, specify both a value that is the return type of the @Bean method and annotation.

Graceful Shutdown

Graceful shutdown of the embedded web server (Jetty, Rector Netty, Tomcat, or Undertow) is now enabled by default. If you need to restore the previous behavior, set server.shutdown to immediate.

Paketo tiny Builder for Building OCI Images

The default Cloud Native Buildpacks builder used when building OCI images for JVM applications using the Maven spring-boot:build-image goal or Gradle bootBuildImage task has changed from paketobuildpacks/builder-jammy-base to paketobuildpacks/builder-jammy-java-tiny. This should result in smaller images. The tiny builder does not include a shell, so it might not work for applications that require a start script to run the application. See the Maven or Gradle documentation for information on customizing the builder.

Dynamic Properties with Testcontainers

Support for defining dynamic properties by injecting a DynamicPropertyRegistry has been deprecated and attempting to do so will now fail by default. Instead of injecting DynamicPropertyRegistry, implement a separate @Bean method that returns a DynamicPropertyRegistrar. This separate bean method should inject the container from which the properties' values will be sourced. This addresses some container lifecycle issues and ensures that the container from which a property’s value has been sourced will have been started before the property is used.

If you wish to continue injecting DynamicPropertyRegistry (at the risk of encountering the lifecycle issue described above), set spring.testcontainers.dynamic-property-registry-injection to either warn or allow. The former will log a warning while allowing the use of an injected DynamicPropertyRegistry. The latter will silently allow the use of an injected DynamicPropertyRegistry, fully restoring Spring Boot 3.3’s behavior.

@AutoConfigureTestDatabase with Containers

The @AutoConfigureTestDatabase annotation now attempts to detect if a database has been sourced from a container. This should remove the need to add replace=Replace.NONE if you want to use the annotation with container databases.

If you need to revert to the old behavior, set replace=Replace.AUTO_CONFIGURED on the annotation.

Controlling Access to Actuator Endpoints

Support for enabling and disabling endpoints has been reworked, replacing the on/off support that it provided with a finer-grained access model. The new model supports only allowing read-only access to endpoint operations, in addition to disabling an endpoint (access of none) and fully enabling it (access of unrestricted).

The following properties have been deprecated:

  • management.endpoints.enabled-by-default

  • management.endpoint.<id>.enabled

Their replacements are:

  • management.endpoints.access.default

  • management.endpoint.<id>.access

Similarly, the enableByDefault attribute on @Endpoint has been deprecated with a new defaultAccess attribute replacing it.

As part of these changes, enabled-by-default is now applied consistently and irrespective of the use of @ConditionalOnEnabledEndpoint. If you lose access to an endpoint when upgrading, set management.endpoint.<id>.access to read-only or unrestricted or set management.endpoint.<id>.enabled to true to make the endpoint accessible again.

Additionally, a new property has been introduced that allows an operator to control the permitted level of access to Actuator endpoints:

  • management.endpoints.access.max-permitted

This property caps any access that may have been configured for an endpoint. For example, if management.endpoints.access.max-permitted is set to read-only and management.endpoint.loggers.access is set to unrestricted, only read-only access to the loggers endpoint will be allowed.

Cloud Foundry ConditionalOnAvailableEndpoint Exposure

The EndpointExposure.CLOUD_FOUNDRY enum value used with the @ConditionalOnAvailableEndpoint has been deprecated in favor of EndpointExposure.WEB. Typical Spring Boot application will probably not be affected by this change, however, if you have custom Cloud Foundry specific actuator endpoint beans you should update your conditions to use EndpointExposure.WEB.

HtmlUnit 4.3

HtmlUnit has been upgraded to 4.3. With this upgrade comes a change in dependency coordinates from net.sourceforge.htmlunit:htmlunit to org.htmlunit:htmlunit and a change in package names from com.gargoylesoftware.htmlunit. to org.htmlunit.. When upgrading, update your build configuration and imports accordingly.

Selenium HtmlUnit 4.22

Selenium HtmlUnit has been updated to 4.22. With this upgrade comes a change in dependency coordinates from org.seleniumhq.selenium:htmlunit-driver to org.seleniumhq.selenium:htmlunit3-driver. When upgrading, update your build configuration accordingly.

WebJars Locator Integration

For faster startup times and efficient WebJars asset resolution, you will need to update your pom.xml/build.gradle to depend on org.webjars:webjars-locator-lite instead of org.webjars:webjars-locator-core (both dependencies are managed by Spring Boot). Note that org.webjars:webjars-locator-core support in Spring is now deprecated and will be removed in a future version. See the reference documentation section on this feature.

OkHttp Dependency Management Removed

Spring Boot no longer depends on OkHttp so it no longer manages its version. If your application has OkHttp dependencies, update its build to use an OkHttp version that meets its needs.

Deprecations from Spring Boot 3.2

Classes, methods, and properties that were deprecated in Spring Boot 3.2 and marked for removal in 3.4 have been removed in this release. Please ensure that you aren’t calling deprecated methods before upgrading.

Minimum Requirements Changes

Gradle

Gradle 7.5, 8.0, 8.1, 8.2 and 8.3 are no longer supported. Gradle 7.x (7.6.4 or later) or Gradle 8.x (8.4 or later) is now required.

New and Noteworthy

Tip
 Check the configuration changelog for a complete overview of the changes in configuration.

Structured Logging

Support for structured logging has been introduced with built-in support for Elastic Common Schema (ecs), Graylog Extended Log Format (gelf) and Logstash (logstash). To enable structured file logging set logging.structured.format.file to ecs, gelf or logstash. Similarly, to enable structured console logging set logging.structured.format.console.

To learn more about Spring Boot’s support for structured logging, including how to define a custom format, see the reference documentation.

@Fallback Beans

@ConditionalOnSingleCandidate now supports @Fallback beans. The condition will match if there’s a single primary bean or, if there are no primary beans, if there’s a single non-fallback bean.

Defining Additional Beans

When type matching, bean-based conditions will now ignore any beans that are not default candidates. By declaring that a bean is not a default candidate (using @Bean(defaultCandidate=false)), a bean of an auto-configured type can now be defined without causing the auto-configure bean of the same type to back off. This reduces the configuration required to, for example, use two DataSource beans or two EntityManagerFactory beans in the same application.

ClientHttpRequestFactory Builders

A new ClientHttpRequestFactoryBuilder interface has been added which allows you to build ClientHttpRequestFactory instances for specific technologies. Builders allow for fine-grained customization of the underlying components, as well as a consistent way to apply common settings.

The following builders can be created for specific libraries using static factory methods from the interface:

  • Apache HTTP Components (ClientHttpRequestFactoryBuilder.httpComponents())

  • Jetty Client (ClientHttpRequestFactoryBuilder.jetty())

  • Reactor Netty HttpClient (ClientHttpRequestFactoryBuilder.reactor())

  • JDK HttpClient (ClientHttpRequestFactoryBuilder.jdk())

  • Simple JDK HttpURLConnection (ClientHttpRequestFactoryBuilder.simple())

See the updated reference docs for more details, including how to apply common settings using configuration properties.

Observability Improvements

Application Groups

The new spring.application.group property can be used to group applications together, for example if they all belong to some business unit or one bigger application arrangement. When this property is set, it’s also included in the log messages. This behavior can be controlled with the property logging.include-application.group. The application group is also automatically added to the OpenTelemetry Resource.

OTLP

It’s now possible to send OTLP spans over the gRPC transport. For this, set the new configuration property management.otlp.tracing.transport to grpc. This property defaults to http. Service connection support for this has been added, too.

The new properties under management.otlp.logs can be used to auto-configure OpenTelemetry’s OtlpHttpLogRecordExporter and SdkLoggerProvider.

Other Observability Updates

The ProcessInfoContributor now also shows memory info about heap and non-heap usage.

New management.otlp.tracing.export.enabled, management.wavefront.tracing.export.enabled and management.zipkin.tracing.export.enabled properties can now be used to enable or disable trace exporting more finely grained.

AssertJ Support for MockMvc

Auto-configuration for MockMvcTester is provided when AssertJ is on the classpath. MockMvcTester lets you define the requests and the assertions using a fluent API. It can be injected anywhere MockMvc is.

For more details, see the dedicated section of the Spring Framework reference documentation.

Spring Pulsar

Configuration properties are now provided for configuring a default tenant and namespace. The defaults apply when consuming or producing messages with a topic URL that is not fully qualified. Configure them using the spring.pulsar.defaults.topic.tenant and spring.pulsar.defaults.topic.namespace configuration properties or define your own PulsarTopicBuilder bean. Set spring.pulsar.defaults.topic.enabled=false to disable the defaults.

A new PulsarContainerFactoryCustomizer interface has been added to support customization of the auto-configured PulsarContainerFactory.

The spring.pulsar.consumer.subscription.name configuration property now applies to the auto-configured Pulsar listener container.

Two new configuration properties for configuring the Pulsar client’s concurrency have been introduced:

  • spring.pulsar.client.threads.io controls the number of threads to be used for handling connections to brokers.

  • spring.pulsar.client.threads.listener controls the number of threads to be used for message listeners.

Lastly, the new spring.pulsar.listener.concurrency property can be used to control the concurrency of the auto-configured Pulsar message listener container.

Couchbase Authentication

Client certificates can now be used to authenticate with a Couchbase cluster, as an alternative to basic username and password authentication. See the reference documentation for more details.

FreeMarker

FreeMarker variables that are used by the auto-configured FreeMarker’s Configuration object can now be customized. To do so, define one or more beans of type FreeMarkerVariablesCustomizer. These are invoked according to their defined order (if any).

Embedded Broker support with ActiveMQ Classic

Now that ActiveMQ Classic supports an embedded broker again, the auto-configuration has been updated to support it.

Note that contrary to Spring Boot 2.7.x, the ActiveMQ starter is client only. To use the embedded broker, org.apache.activemq:activemq-broker should be added to your application.

Configuration Metadata

The default value of an Enum is now detected by the annotation processor. If you have added manual metadata to provide the value for a custom property, make sure to remove it.

Deprecating and Replacing Auto-configuration Classes

To make it easier to evolve auto-configuration, support for deprecating and replacing auto-configuration classes has been introduced. Replacements can be declared in a new META-INF/spring/org.springframework.boot.autoconfigure.AutoConfiguration.replacements file. To learn more, please refer to the reference documentation.

Virtual Threads

If virtual threads are enabled, the following components will now use them:

  • OtlpMeterRegistry

  • Undertow web server

Image Building Improvements

Spring Boot now uses the paketobuildpacks/builder-jammy-java-tiny by default. This builder supports ARM and x64 platforms out of the box.

A trustBuilder option has been added to the Maven and Gradle plugins for building OCI images. This option controls how the CNB lifecycle is invoked, providing improved security when using builders from untrusted sources. By default, builders from the Paketo project, Heroku, and Google are trusted. See the Maven or Gradle documentation for information.

An imagePlatform option has been added to the Maven and Gradle plugins for building OCI images. This option can be used to specify the operating system and architecture of any CNB builder, run, and buildpack images that are pulled in order to run CNB buildpacks. This can be used to build an image for an operating system and architecture that is different from the OS/architecture of the host platform, when the host platform supports emulation of the other OS/architecture (for example, when using Rosetta on a Mac with Apple silicon to emulate the AMD archicture on an ARM host). See the Maven or Gradle documentation for more information.

Docker Compose Improvements

Docker Compose now supports multiple Docker Compose configuration files.

Command Line Arguments

The new properties spring.docker.compose.start.arguments and spring.docker.compose.stop.arguments can be used to specify additional command line arguments that are passed to the Docker Compose subcommands when starting and stopping services. A new spring.docker.compose.arguments property has been added to pass arguments to Docker Compose.

Updated Support

  • Postgres POSTGRES_HOST_AUTH_METHOD=trust environment variable is now supported.

  • Support for Redis Stack and Redis Stack Server has been added using the redis/redis-stack and redis/redis-stack-server container images respectively.

  • Support for Grafana LGTM has been added using the grafana/otel-lgtm container image.

  • Support has been added for Hazelcast (using HazelcastConnectionDetails).

  • Support has been added for OTLP logging.

Testcontainers Improvements

  • Support has been added for org.testcontainers.kafka.KafkaContainer.

  • Support for Redis Stack and Redis Stack Server has been added using the redis/redis-stack and redis/redis-stack-server container images respectively.

  • Support has been added for org.testcontainers.grafana.LgtmStackContainer.

  • Support has been added for Hazelcast (using HazelcastConnectionDetails).

  • Support has been added for OTLP logging.

  • Support for RedisContainer has been added

Actuator

Pluggable Actuator Exposers

It is now possible to extend Spring Boot to expose actuator endpoints in a pluggable way. The new EndpointExposureOutcomeContributor interface can be implemented to influence @ConditionalOnAvailableEndpoint conditions.

This extension should make it easier to offer additional platform integrations similar to our existing Cloud Foundry support.

SSL information and health check

If you’re using SSL bundles, there’s now a new endpoint showing SSL information (validity dates, issuer, subject, etc.) available under /actuator/info. This endpoint also shows soon to be expired certificates to alert you that they need to be rotated soon. There’s a new configuration property named management.health.ssl.certificate-validity-warning-threshold to configure the threshold.

A new health check monitoring the SSL certificates has been added, too. If a certificate is invalid, it sets the status to OUT_OF_SERVICE.

Additional info in /actuator/scheduledtasks endpoints

The /scheduledtasks Actuator endpoint now exposes additional metadata about scheduled tasks, such as "next scheduled execution time" and "last execution time, status and exception".

Dependency Upgrades

Spring Boot 3.4 moves to new versions of several Spring projects:

Numerous third-party dependencies have also been updated, some of the more noteworthy of which are the following:

Miscellaneous

Apart from the changes listed above, there have also been lots of minor tweaks and improvements including:

  • You can now use a Customizer<Liquibase> bean to customize Liquibase before it is being used

  • The properties used to create a JCache CacheManager can now be customized by defining a JCachePropertiesCustomizer bean.

  • The RequestToViewNameTranslator used by Spring MVC can now be customized by defining a bean named viewNameTranslator.

  • Lettuce’s ClientOptions can now be customized using a LettuceClientOptionsBuilderCustomizer bean. For broader configuration of the whole LettuceClientConfiguration, continue to use LettuceClientConfigurationBuilderCustomizer.

  • The new customizer ProxyConnectionFactoryCustomizer can be used to customize a R2DBC ProxyConnectionFactory.

  • An audit event is now published if a Spring Security logout happens.

  • TLS on JavaMailSender can now be configured with SSL bundles using the new properties spring.mail.ssl.*

  • GSON’s strictness can be configured using the new spring.gson.strictness property.

  • @Name can now be used on the field of a JavaBean-style configuration property to customize its name.

  • When derived from another DataSource, DataSourceBuilder can now determine the Driver class name using the source DataSource’s URL if it does not expose the Driver class name.

  • Liveness and Readiness health probes are now automatically enabled on Cloud Foundry Platforms.

  • The new property spring.application.version can be used to read and set the application version. The default value for the property is taken from the Implementation-Version of the manifest.

  • The auto-configured EntityManagerFactoryBuilder defines the native (e.g. Hibernate) properties as well.

  • Spring Integration’s TaskScheduler is now virtual thread aware, even if @EnableScheduling hasn’t been used.

  • @ConditionalOnAvailableEndpoint now has a value alais for endpoint.

  • A new configuration property, spring.data.web.pageable.serialization-mode, for configuring Spring Data Web’s serialization mode has been added.

  • When using the SpringApplication.from(…​) syntax, it’s now possible to specify the additional profiles to activate.

  • The Spring Boot plugin no longer sets BP_NATIVE_IMAGE: true in the buildpack environment.

  • Registered @ConfigurationProperties beans now respect @DependsOn, @Description, @Fallback, @Lazy, @Primary, @Scope and @Role annotations.

  • Log4j2’s MultiFormatStringBuilderFormattable is now supported in structured logging

  • A new configuration property, spring.jms.listener.max-messages-per-task, for configuring the maximum number of messages a listener processes in one task has been added.

  • The default security configuration now exposes health groups mapped to additional paths. In addition, both EndpointRequest classes now offer toAdditionalPaths(…​) methods.

  • The partitioned attribute of session cookies can now be set through properties.

  • A new server.jetty.max-form-keys property has been added to customize Jetty’s max form keys.

  • New properties management.otlp.logging.connect-timeout and management.otlp.tracing.connect-timeout have been added to configure the connect timeout to the OTLP collector.

  • Support for gRPC transport when shipping logs over OTLP has been added.

  • When binding a directory in the container which is used by buildpacks in the build process, a warning is now shown.

  • When building a native image with --enable-sbom=sbom, this SBOM is now auto-detected.

  • The DatabaseDriver enum now support the ClickHouse JDBC driver.

  • The new properties management.logging.export.enabled and management.otlp.logging.export.enabled can be used to disable log exporting.

  • The TaskExecutor used by Spring Batch can be customized by defining a TaskExecutor bean annotated with @BatchTaskExectuor.

  • Spring Session auto-configuration now supports the indexed repository type in reactive web applications.

  • A warning from HikariCheckpointRestoreLifecycle will be logged if pool suspension isn’t configured and a checkpoint is created.

Deprecations in Spring Boot 3.4

  • spring.gson.lenient in favor of spring.gson.strictness.

  • @MockBean and @SpyBean in favor of Spring Framework’s @MockitoBean and MockitoSpyBean respectively.

  • org.springframework.boot.ResourceBanner#getApplicationVersion(Class<?>) in favor of spring.application.version property.

  • org.springframework.boot.SpringApplication#logStartupInfo(boolean) in favor of org.springframework.boot.SpringApplication#logStartupInfo(ConfigurationApplicationContext).

  • org.springframework.boot.logging.logback.ApplicationNameConverter in favor of org.springframework.boot.logging.logback.EnclosedInSquareBracketsConverter.

  • org.springframework.boot.actuate.autoconfigure.endpoint.expose.EndpointExposure#CLOUD_FOUNDRY in favor of org.springframework.boot.actuate.autoconfigure.endpoint.expose.EndpointExposure#WEB.

  • org.springframework.boot.actuate.autoconfigure.tracing.otlp.OtlpTracingConnectionDetails#getUrl() in favor of getUrl(Transport)

  • org.springframework.boot.actuate.autoconfigure.tracing.OpenTelemetryAutoConfiguration in favor of org.springframework.boot.actuate.autoconfigure.tracing.OpenTelemetryTracingAutoConfiguration

  • OtlpAutoConfiguration has been in favor of OtlpTracingAutoConfiguration

  • management.endpoints.enabled-by-default and management.endpoint.<id>.enabled in favor of management.endpoints.access.default and management.endpoint.<id>.access respectively

  • enableByDefault on @Endpoint in favor of defaultAccess

Pages

Clone this wiki locally