removing wire.begin from inside library, updating examples to match, …

…changing Serial debug, adding simple example 1

examples/Example1_BasicReadings/Example1_BasicReadings.ino

@@ -18,33 +18,19 @@
 
 #include "SparkFun_SHTC3.h" // Click here to get the library: http://librarymanager/All#SparkFun_SHTC3
 
-#define SERIAL_PORT Serial  // #define-ing the SERIAL_PORT allows you to easily change your target port - for example if you are using a SAMD21 board you can change "Serial" to "SerialUSB"
-
 SHTC3 mySHTC3;              // Declare an instance of the SHTC3 class
 
 void setup() {
-  SERIAL_PORT.begin(115200);                                  // Begin Serial 
-  while(SERIAL_PORT == false){};                                   // Wait for the serial connection to start up
-  SERIAL_PORT.println("SHTC3 Example 1 - Basic Readings");    // Title
-  SERIAL_PORT.println();
 
-  SERIAL_PORT.print("Beginning sensor. Result = ");           // Most SHTC3 functions return a variable of the type "SHTC3_Status_TypeDef" to indicate the status of their execution 
+  Serial.begin(115200);                                  // Begin Serial 
+  while(Serial == false){};                                   // Wait for the serial connection to start up
+  Serial.println("SHTC3 Example 1 - Basic Readings");    // Title
+  Wire.begin();
+  Serial.print("Beginning sensor. Result = ");           // Most SHTC3 functions return a variable of the type "SHTC3_Status_TypeDef" to indicate the status of their execution 
   errorDecoder(mySHTC3.begin());                              // To start the sensor you must call "begin()", the default settings use Wire (default Arduino I2C port)
-  Wire.setClock(400000);                                      // The sensor is listed to work up to 1 MHz I2C speed, but the I2C clock speed is global for all sensors on that bus so using 400kHz or 100kHz is recommended
-  SERIAL_PORT.println();
-
-  if(mySHTC3.passIDcrc)                                       // Whenever data is received the associated checksum is calculated and verified so you can be sure the data is true
-  {                                                           // The checksum pass indicators are: passIDcrc, passRHcrc, and passTcrc for the ID, RH, and T readings respectively
-    SERIAL_PORT.print("ID Passed Checksum. ");
-    SERIAL_PORT.print("Device ID: 0b"); 
-    SERIAL_PORT.print(mySHTC3.ID, BIN);                       // The 16-bit device ID can be accessed as a member variable of the object
-  }
-  else
-  {
-    SERIAL_PORT.print("ID Checksum Failed. ");
-  }
-  SERIAL_PORT.println("\n\n");
-  SERIAL_PORT.println("Waiting for 5 seconds so you can read this info ^^^");
+  Serial.println();
+  Serial.println("\n\n");
+  Serial.println("Waiting for 5 seconds so you can read this info ^^^");
 
   delay(5000);                                                // Give time to read the welcome message and device ID. 
 }
@@ -64,45 +50,27 @@ void printInfo()
 {
   if(mySHTC3.lastStatus == SHTC3_Status_Nominal)              // You can also assess the status of the last command by checking the ".lastStatus" member of the object
   {
-    SERIAL_PORT.print("RH = "); 
-    SERIAL_PORT.print(mySHTC3.toPercent());                   // "toPercent" returns the percent humidity as a floating point number
-    SERIAL_PORT.print("% (checksum: "); 
-    if(mySHTC3.passRHcrc)                                     // Like "passIDcrc" this is true when the RH value is valid from the sensor (but not necessarily up-to-date in terms of time)
-    {
-      SERIAL_PORT.print("pass");
-    }
-    else
-    {
-      SERIAL_PORT.print("fail");
-    }
-    SERIAL_PORT.print("), T = "); 
-    SERIAL_PORT.print(mySHTC3.toDegF());                        // "toDegF" and "toDegC" return the temperature as a flaoting point number in deg F and deg C respectively 
-    SERIAL_PORT.print(" deg F (checksum: "); 
-    if(mySHTC3.passTcrc)                                        // Like "passIDcrc" this is true when the T value is valid from the sensor (but not necessarily up-to-date in terms of time)
-    {
-      SERIAL_PORT.print("pass");
-    }
-    else
-    {
-      SERIAL_PORT.print("fail");
-    }
-    SERIAL_PORT.println(")");
+    Serial.print("RH = "); 
+    Serial.print(mySHTC3.toPercent());                        // "toPercent" returns the percent humidity as a floating point number
+    Serial.print("%, T = "); 
+    Serial.print(mySHTC3.toDegF());                           // "toDegF" and "toDegC" return the temperature as a flaoting point number in deg F and deg C respectively 
+    Serial.println(" deg F); 
   }
   else
   {
-    SERIAL_PORT.print("Update failed, error: "); 
+    Serial.print("Update failed, error: "); 
     errorDecoder(mySHTC3.lastStatus);
-    SERIAL_PORT.println();
+    Serial.println();
   }
 }
 
 void errorDecoder(SHTC3_Status_TypeDef message)                             // The errorDecoder function prints "SHTC3_Status_TypeDef" resultsin a human-friendly way
 {
   switch(message)
   {
-    case SHTC3_Status_Nominal : SERIAL_PORT.print("Nominal"); break;
-    case SHTC3_Status_Error : SERIAL_PORT.print("Error"); break;
-    case SHTC3_Status_CRC_Fail : SERIAL_PORT.print("CRC Fail"); break;
-    default : SERIAL_PORT.print("Unknown return code"); break;
+    case SHTC3_Status_Nominal : Serial.print("Nominal"); break;
+    case SHTC3_Status_Error : Serial.print("Error"); break;
+    case SHTC3_Status_CRC_Fail : Serial.print("CRC Fail"); break;
+    default : Serial.print("Unknown return code"); break;
   }
 }