Adding thanks for paulvha

README.md

@@ -5,7 +5,7 @@ SparkFun SCD30 CO₂ Sensor Library
 
 [*SparkX CO₂ Humidity and Temperature Sensor - SCD30 (SPX-14751)*](https://www.sparkfun.com/products/14751)
 
-The SCD30 from Sensirion is a high quality [NDIR](https://en.wikipedia.org/wiki/Nondispersive_infrared_sensor) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude.
+The SCD30 from Sensirion is a high quality [NDIR](https://en.wikipedia.org/wiki/Nondispersive_infrared_sensor) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to compensate for altitude.
 
 We've written an Arduino library to make reading the CO₂, humidity, and temperature very easy. It can be downloaded through the Arduino Library manager: search for 'SparkFun SCD30'. We recommend using a [Qwiic Breadboard Cable](https://www.sparkfun.com/products/14425) to connect the SCD30 to a Qwiic compatible board. The Ye*LL*ow wire goes in the SC*L* pin. The SCD30 also supports a serial interface but we haven't worked with it.
 
@@ -23,14 +23,15 @@ Thanks to!
 * [AndreasExner](https://github.com/AndreasExner) for adding [reset and getAutoSelfCalibration methods](https://github.com/sparkfun/SparkFun_SCD30_Arduino_Library/pull/17)
 * [awatterott](https://github.com/awatterott) for adding [getAltitudeCompensation()](https://github.com/sparkfun/SparkFun_SCD30_Arduino_Library/pull/18)
 * [jogi-k](https://github.com/jogi-k) for adding [teensy i2clib](https://github.com/sparkfun/SparkFun_SCD30_Arduino_Library/pull/19) support
+* [paulvha](https://github.com/paulvha) for the suggestions and corrections in [his version of the library](https://github.com/paulvha/scd30)
 
 Repository Contents
 -------------------
 
-* **/examples** - Example sketches for the library (.ino). Run these from the Arduino IDE. 
+* **/examples** - Example sketches for the library (.ino). Run these from the Arduino IDE.
 * **/src** - Source files for the library (.cpp, .h).
-* **keywords.txt** - Keywords from this library that will be highlighted in the Arduino IDE. 
-* **library.properties** - General library properties for the Arduino package manager. 
+* **keywords.txt** - Keywords from this library that will be highlighted in the Arduino IDE.
+* **library.properties** - General library properties for the Arduino package manager.
 
 Documentation
 --------------
@@ -40,9 +41,9 @@ Documentation
 License Information
 -------------------
 
-This product is _**open source**_! 
+This product is _**open source**_!
 
-Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round! 
+Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!
 
 Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.