[devices]: Add lpmode in sfputil.py for Accton AS7716-32XB #3042
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: brandon_chuang [email protected]
What I did
Add lpmode in sfputil.py for as7716-32xb.
.
How I did it
Implement get_low_power_mode/set_low_power_mode in sfputil.py
How to verify it
sfputil show lpmode
sfputil lpmode off
sfputil lpmode on
Description for the changelog
Access eeprom from transceiver to get/set lpmode status
If "Power override" bit is not set, return the H/W pin status depended on H/W design.
For as7716-32xb, this pin is pulled low which is High Power Mode.
If "Power override" bit is set, retrun the S/W lpmode status read from eeprom.
Below is the Power Mode Truth Table defined in sff-8436
LPMode_Pin Power_overide_Bit Power_set_Bit Module_Power_Allowed
1 0 X Low Power
0 0 X High Power
X 1 1 Low Power
X 1 0 High Power