Add RFC for improving request ID access in SDK clients

design/src/SUMMARY.md

@@ -54,7 +54,8 @@
   - [RFC-0029: Finding New Home for Credential Types](./rfcs/rfc0029_new_home_for_cred_types.md)
   - [RFC-0030: Serialization And Deserialization](./rfcs/rfc0030_serialization_and_deserialization.md)
   - [RFC-0031: Providing Fallback Credentials on Timeout](./rfcs/rfc0031_providing_fallback_credentials_on_timeout.md)
-  - [RFC-0032: Better Constraint Violations](./rfc0031_better_constraint_violations.md)
+  - [RFC-0032: Better Constraint Violations](./rfcs/rfc0032_better_constraint_violations.md)
+  - [RFC-0033: Improving access to request IDs in SDK clients](./rfcs/rfc0033_improve_sdk_request_id_access.md)
 
 - [Contributing](./contributing/overview.md)
   - [Writing and debugging a low-level feature that relies on HTTP](./contributing/writing_and_debugging_a_low-level_feature_that_relies_on_HTTP.md)

design/src/rfcs/overview.md

@@ -41,4 +41,5 @@
 - [RFC-0029: Finding New Home for Credential Types](./rfc0029_new_home_for_cred_types.md)
 - [RFC-0030: Serialization And Deserialization](./rfc0030_serialization_and_deserialization.md)
 - [RFC-0031: Providing Fallback Credentials on Timeout](./rfc0031_providing_fallback_credentials_on_timeout.md)
-- [RFC-0032: Better Constraint Violations](./rfc0031_better_constraint_violations.md)
+- [RFC-0032: Better Constraint Violations](./rfc0032_better_constraint_violations.md)
+- [RFC-0033: Improving access to request IDs in SDK clients](./rfc0033_improve_sdk_request_id_access.md)

design/src/rfcs/rfc0033_improve_sdk_request_id_access.md

@@ -0,0 +1,245 @@
+RFC: Improving access to request IDs in SDK clients
+===================================================
+
+> Status: Implemented in [#2129](https://github.com/awslabs/smithy-rs/pull/2129)
+>
+> Applies to: AWS SDK clients
+
+At time of writing, customers can retrieve a request ID in one of four ways in the Rust SDK:
+
+1. For error cases where the response parsed successfully, the request ID can be retrieved
+   via accessor method on operation error. This also works for unmodeled errors so long as
+   the response parsing succeeds.
+2. For error cases where a response was received but parsing fails, the response headers
+   can be retrieved from the raw response on the error, but customers have to manually extract
+   the request ID from those headers (there's no convenient accessor method).
+3. For all error cases where the request ID header was sent in the response, customers can
+   call `SdkError::into_service_error` to transform the `SdkError` into an operation error,
+   which has a `request_id` accessor on it.
+4. For success cases, the customer can't retrieve the request ID at all if they use the fluent
+   client. Instead, they must manually make the operation and call the underlying Smithy client
+   so that they have access to `SdkSuccess`, which provides the raw response where the request ID
+   can be manually extracted from headers.
+
+Only one of these mechanisms is convenient and ergonomic. The rest need considerable improvements.
+Additionally, the request ID should be attached to tracing events where possible so that enabling
+debug logging reveals the request IDs without any code changes being necessary.
+
+This RFC proposes changes to make the request ID easier to access.
+
+Terminology
+-----------
+
+- **Request ID:** A unique identifier assigned to and associated with a request to AWS that is
+  sent back in the response headers. This identifier is useful to customers when requesting support.
+- **Operation Error:** Operation errors are code generated for each operation in a Smithy model.
+  They are an enum of every possible modeled error that that operation can respond with, as well
+  as an `Unhandled` variant for any unmodeled or unrecognized errors.
+- **Modeled Errors:** Any error that is represented in a Smithy model with the `@error` trait.
+- **Unmodeled Errors:** Errors that a service responds with that do not appear in the Smithy model.
+- **SDK Clients:** Clients generated for the AWS SDK, including "adhoc" or "one-off" clients.
+- **Smithy Clients:** Any clients not generated for the AWS SDK, excluding "adhoc" or "one-off" clients.
+
+SDK/Smithy Purity
+-----------------
+
+Before proposing any changes, the topic of purity needs to be covered. Request IDs are not
+currently a Smithy concept. However, at time of writing, the request ID concept is leaked into
+the non-SDK rust runtime crates and generated code via the [generic error] struct and the
+`request_id` functions on generated operation errors (e.g., [`GetObjectError` example in S3]).
+
+This RFC attempts to remove these leaks from Smithy clients.
+
+Proposed Changes
+----------------
+
+First, we'll explore making it easier to retrieve a request ID from errors,
+and then look at making it possible to retrieve them from successful responses.
+To see the customer experience of these changes, see the **Example Interactions**
+section below.
+
+### Make request ID retrieval on errors consistent
+
+One could argue that customers being able to convert a `SdkError` into an operation error
+that has a request ID on it is sufficient. However, there's no way to write a function
+that takes an error from any operation and logs a request ID, so it's still not ideal.
+
+The `aws-http` crate needs to have a `RequestId` trait on it to facilitate generic
+request ID retrieval:
+
+```rust
+pub trait RequestId {
+    /// Returns the request ID if it's available.
+    fn request_id(&self) -> Option<&str>;
+}
+```
+
+This trait will be implemented for `SdkError` in `aws-http` where it is declared,
+complete with logic to pull the request ID header out of the raw HTTP responses
+(it will always return `None` for event stream `Message` responses; an additional
+trait may need to be added to `aws-smithy-http` to facilitate access to the headers).
+This logic will try different request ID header names in order of probability
+since AWS services have a couple of header name variations. `x-amzn-requestid` is
+the most common, with `x-amzn-request-id` being the second most common.
+
+`aws-http` will also implement `RequestId` for `aws_smithy_types::error::Error`,
+and the `request_id` method will be removed from `aws_smithy_types::error::Error`.
+Places that construct `Error` will place the request ID into its `extras` field,
+where the `RequestId` trait implementation can retrieve it.
+
+A codegen decorator will be added to `sdk-codegen` to implement `RequestId` for
+operation errors, and the existing `request_id` accessors will be removed from
+`CombinedErrorGenerator` in `codegen-core`.
+
+With these changes, customers can directly access request IDs from `SdkError` and
+operations errors by importing the `RequestId` trait. Additionally, the Smithy/SDK
+purity is improved since both places where request IDs are leaked to Smithy clients
+will be resolved.
+
+### Implement `RequestId` for outputs
+
+To make it possible to retrieve request IDs when using the fluent client, the new
+`RequestId` trait can be implemented for outputs.
+
+Some services (e.g., Transcribe Streaming) model the request ID header in their
+outputs, while other services (e.g., Directory Service) model a request ID
+field on errors. In some cases, services take `RequestId` as a modeled input
+(e.g., IoT Event Data). It follows that it is possible, but unlikely, that
+a service could have a field named `RequestId` that is not the same concept
+in the future.
+
+Thus, name collisions are going to be a concern for putting a request ID accessor
+on output. However, if it is implemented as a trait, then this concern is partially
+resolved. In the vast majority of cases, importing `RequestId` will provide the
+accessor without any confusion. In cases where it is already modeled and is the
+same concept, customers will likely just use it and not even realize they didn't
+import the trait. The only concern is future cases where it is modeled as a
+separate concept, and as long as customers don't import `RequestId` for something
+else in the same file, that confusion can be avoided.
+
+In order to implement `RequestId` for outputs, either the original response needs
+to be stored on the output, or the request ID needs to be extracted earlier and
+stored on the output. The latter will lead to a small amount of header lookup
+code duplication.
+
+In either case, the `StructureGenerator` needs to be customized in `sdk-codegen`
+(Appendix B outlines an alternative approach to this and why it was dismissed).
+This will be done by adding customization hooks to `StructureGenerator` similar
+to the ones for `ServiceConfigGenerator` so that a `sdk-codegen` decorator can
+conditionally add fields and functions to any generated structs. A hook will
+also be needed to additional trait impl blocks.
+
+Once the hooks are in place, a decorator will be added to store either the original
+response or the request ID on outputs, and then the `RequestId` trait will be
+implemented for them. The `ParseResponse` trait implementation will be customized
+to populate this new field.
+
+Note: To avoid name collisions of the request ID or response on the output struct,
+these fields can be prefixed with an underscore. It shouldn't be possible for SDK
+fields to code generate with this prefix given the model validation rules in place.
+
+### Implement `RequestId` for `Operation` and `operation::Response`
+
+In the case that a customer wants to ditch the fluent client, it should still
+be easy to retrieve a request ID. To do this, `aws-http` will provide `RequestId`
+implementations for `Operation` and `operation::Response`. These implementations
+will likely make the other `RequestId` implementations easier to implement as well.
+
+### Implement `RequestId` for `Result`
+
+The `Result` returned by the SDK should directly implement `RequestId` when both
+its `Ok` and `Err` variants implement `RequestId`. This will make it possible
+for a customer to feed the return value from `send()` directly to a request ID logger.
+
+Example Interactions
+--------------------
+
+### Generic Handling Case
+
+```rust
+// A re-export of the RequestId trait
+use aws_sdk_service::primitives::RequestId;
+
+fn my_request_id_logging_fn(request_id: &dyn RequestId) {
+    println!("request ID: {:?}", request_id.request_id());
+}
+
+let result = client.some_operation().send().await?;
+my_request_id_logging_fn(&result);
+```
+
+### Success Case
+
+```rust
+use aws_sdk_service::primitives::RequestId;
+
+let output = client.some_operation().send().await?;
+println!("request ID: {:?}", output.request_id());
+```
+
+### Error Case with `SdkError`
+
+```rust
+use aws_sdk_service::primitives::RequestId;
+
+match client.some_operation().send().await {
+    Ok(_) => { /* handle OK */ }
+    Err(err) => {
+        println!("request ID: {:?}", output.request_id());
+    }
+}
+```
+
+### Error Case with operation error
+
+```rust
+use aws_sdk_service::primitives::RequestId;
+
+match client.some_operation().send().await {
+    Ok(_) => { /* handle OK */ }
+    Err(err) => match err.into_service_err() {
+        err @ SomeOperationError::SomeError(_) => { println!("request ID: {:?}", err.request_id()); }
+        _ => { /* don't care */ }
+    }
+}
+```
+
+Changes Checklist
+-----------------
+
+- [x] Create the `RequestId` trait in `aws-http`
+- [x] Implement for errors
+  - [x] Implement `RequestId` for `SdkError` in `aws-http`
+  - [x] Remove `request_id` from `aws_smithy_types::error::Error`, and store request IDs in its `extras` instead
+  - [x] Implement `RequestId` for `aws_smithy_types::error::Error` in `aws-http`
+  - [x] Remove generation of `request_id` accessors from `CombinedErrorGenerator` in `codegen-core`
+- [x] Implement for outputs
+  - [x] Add customization hooks to `StructureGenerator`
+  - [x] Add customization hook to `ParseResponse`
+  - [x] Add customization hook to `HttpBoundProtocolGenerator`
+  - [x] Customize output structure code gen in `sdk-codegen` to add either a request ID or a response field
+  - [x] Customize `ParseResponse` in `sdk-codegen` to populate the outputs
+- [x] Implement `RequestId` for `Operation` and `operation::Response`
+- [x] Implement `RequestId` for `Result<O, E>` where `O` and `E` both implement `RequestId`
+- [x] Re-export `RequestId` in generated crates
+- [x] Add integration tests for each request ID access point
+
+Appendix A: Alternate solution for access on successful responses
+-----------------------------------------------------------------
+
+Alternatively, for successful responses, a second `send` method (that is difficult to name)w
+be added to the fluent client that has a return value that includes both the output and
+the request ID (or entire response).
+
+This solution was dismissed due to difficulty naming, and the risk of name collision.
+
+Appendix B: Adding `RequestId` as a string to outputs via model transform
+-------------------------------------------------------------------------
+
+The request ID could be stored on outputs by doing a model transform in `sdk-codegen` to add a
+`RequestId` member field. However, this causes problems when an output already has a `RequestId` field,
+and requires the addition of a synthetic trait to skip binding the field in the generated
+serializers/deserializers.
+
+[generic error]: https://docs.rs/aws-smithy-types/0.51.0/aws_smithy_types/error/struct.Error.html
+[`GetObjectError` example in S3]: https://docs.rs/aws-sdk-s3/0.21.0/aws_sdk_s3/error/struct.GetObjectError.html#method.request_id