Retour allows you to intelligently redirect legacy URLs, so that you don't lose SEO value when rebuilding & restructuring a website
Related: Retour for Craft 2.x
Note: The license fee for this plugin is $59.00 via the Craft Plugin Store.
Even though this version of Retour was entirely rewritten for Craft CMS 3, it was designed to use all of the same data used by the Craft CMS 2.x version of Retour.
So any existing redirects and statistics will continue to be in place.
This plugin requires Craft CMS 3.0.0 or later.
To install the plugin, follow these instructions.
-
Open your terminal and go to your Craft project:
cd /path/to/project -
Then tell Composer to load the plugin:
composer require nystudio107/craft-retour -
In the Control Panel, go to Settings → Plugins and click the “Install” button for Retour.
You can also install Retour via the Plugin Store in the Craft AdminCP.
Retour allows you to intelligently redirect legacy URLs, so that you don't lose SEO value when rebuilding & restructuring a website.
In addition to supporting traditional exact and RegEx matching of URL patterns, Retour allows you to have dynamic redirects that have access to the data in your entries when matching URL patterns.
Retour will also automatically create a redirect for you if you change an entry's slug, or move an entry around in a Structure.
Unlike other redirect plugins or utilizing .htaccess to do redirects, Retour does not add overhead to each request for each redirect you have in place.
Retour is written to be performant. There is no impact on your website's performance until a 404 exception happens; and even then the resulting matching happens with minimal impact.
Don't just rebuild a website. Transition it with Retour.
If you have just a few static redirects, then your best bet is to put them in your .htaccess file, or better yet, in your .conf file for your virtual host. However, there are a number of cases where using a plugin to handle it is a better solution:
- If you have a large number of redirects, it will slow down every single request your web server handles unnecessarily if they are in
.htaccessor.conf - Often the URL patterns from the legacy website do not match the new website URLs in a deterministic way, which makes creating redirects difficult
- Sometimes you don't have access to the server config files, or you want to give your client the ability to manage redirects easily
Retour solves these problems:
- Retour only attempts to do a redirect after the web server has already thrown a 404 exception. Once a redirect mapping is successfully determined, it also caches the result for speedy resolution of the next redirect request.
- Retour also gives you the ability to do Dynamic Redirects that allow you to import a piece of legacy data into your entries to use as a key for determining the new URL mapping. In this way, utterly dissimilar URLs can be mapped for redirection effectively.
- It provides an easy to use GUI that the client can use from Craft's AdminCP, and keeps statistics on the 404 hits (and misses)
People using the Apache webserver are familiar with the .htaccess file, and may even be using it for redirects. It's very likely that you should not be using .htaccess at all; instead you should disable .htaccess via AllowOverride none and make your configuration changes in your webserver configuration files. From Apache HTTP Server Tutorial: .htaccess files
There are two main reasons to avoid the use of .htaccess files.
The first of these is performance. When AllowOverride is set to allow the
use of .htaccess files, httpd will look in every directory for .htaccess
files. Thus, permitting .htaccess files causes a performance hit, whether or
not you actually even use them! Also, the .htaccess file is loaded every
time a document is requested.
Further note that httpd must look for .htaccess files in all higher-level
directories, in order to have a full complement of directives that it must
apply. (See section on how directives are applied.) Thus, if a file is
requested out of a directory /www/htdocs/example, httpd must look for the
following files:
/.htaccess
/www/.htaccess
/www/htdocs/.htaccess
/www/htdocs/example/.htaccess
And so, for each file access out of that directory, there are 4 additional
file-system accesses, even if none of those files are present. (Note that
this would only be the case if .htaccess files were enabled for /, which is
not usually the case.)
In the case of RewriteRule directives, in .htaccess context these regular
expressions must be re-compiled with every request to the directory, whereas
in main server configuration context they are compiled once and cached.
Additionally, the rules themselves are more complicated, as one must work
around the restrictions that come with per-directory context and
mod_rewrite. Consult the Rewrite Guide for more detail on this subject.
As you can see, avoiding the use of .htaccess completely is best if at all possible, and especially avoid it for RewriteRule directives, such as 404 rewrites.
You can read more in the Stop using .htaccess files! No, really. article.
If you are using Craft CMS "Pro" edition, Retour provides permissions that can be used to grant access to users based on their User Group. These are set in Settings->Users->User Groups:
- Dashboard - whether the user group has access to view the Retour Dashboard
- Redirects - whether the user group has access to viewing and changing Retour Redirects
- Settings - whether the user has access to viewing and changing the Retour Settings
You should also grant them the Access Retour permission under General permissions.
The Retour->Redirects page lists all of your static redirects. You can sort by any column by clicking on the column name, and you can filter the results by typing in the Search for: field.
Clicking on the x next to a static redirect will delete it.
Static Redirects are useful when the Legacy URL Patterns and the new URL patterns are deterministic. You can create them by clicking on Retour->Redirects and then clicking on the New Static Redirect button.
- Legacy URL Pattern - Enter the URL pattern that Retour should match. This matches against the path, the part of the URL after the domain name. e.g.: Exact Match:
/recipes/or RegEx Match:.*RecipeID=(.*) - Destination URL - Enter the destination URL that should be redirected to. This can either be a fully qualified URL or a relative URL. e.g.: Exact Match:
/new-recipes/or RegEx Match:/new-recipes/$1 - Pattern Match Type - What type of matching should be done with the Legacy URL Pattern. Details on RegEx matching can be found at regexr.com. If a plugin provides a custom matching function, you can select it here.
- Redirect Type - Select whether the redirect should be permanent or temporary.
If you rename an Entry's slug (or any other Element with URLs), Retour will automatically create a static redirect for you to keep traffic going to the right place. It will also automatically create a static redirect if you move an entry around in a Structure.
It will appear listed under the "Static Redirects" section like any other static redirect.
The Create Entry Redirects setting in Retour->Settings allows you to enable or disable this feature.
The Export CSV File button on the Retour->Redirects page allows you to export all of your redirects to a CSV file for external processing or archival purposes.
Retour allows you to import redirects from a CSV file, with a GUI that allows you to choose how to map the data:
The first row of data in the CSV file should be the headings for the columns.
Choose the fields to import into Retour from the CSV file by dragging them in the appropriate order. Click on the x to delete an unused field.
The Match Type field must be either exactmatch or regexmatch (case sensitive). Anything left blank will be filled in with default values.
Retour will automatically prevent the creation of a "redirect loop". If you create a new redirect that's destination URL is the same as the source URL of an existing redirect, it will remove the older redirect.
The Retour->Settings page allows you to configure various site-wide settings for Retour:
- Plugin name - The public-facing name of the plugin
- Create Entry Redirects - Controls whether Retour automatically creates static redirects when an entry's URI changes.
- Strip Query String from 404s - Should the query string be stripped from all 404 URLs before their evaluation?
- Strip Query String from Statistics - Should the query string be stripped from the saved statistics source URLs?
- Statistics to Store - How many unique 404 statistics should be stored before they are trimmed.
Retour keeps track of every 404 your website receives. You can view them by clicking on Retour->Dashboard.
You can sort by any column by clicking on the column name, and you can filter the results by typing in the Search for: field.
Only one record is saved per URL Pattern, so the database won't get clogged with a ton of records.
The charts show you how many directs happened during the last month, week, and day, including how many were handled by Retour.
The Handled column will display an √ if the last 404 hit to this URL was handled by Retour, and an x if it was not.
Clicking on the + next to an unhandled 404 will create a new Static Redirect with the 404's URL set as the source.
The Export CSV File button on the Retour->Statistics page allows you to export all of your statistics to a CSV file for external processing or archival purposes.
If you'd like to see an overview of the Retour Statistics in your dashboard, you can add a Retour widget to your Dashboard:
It displays the total number of handled and not handled 404s, and the 5 most recent 404 URLs in each category right in your dashboard.
Retour allows you to implement a custom matching function via plugin, if the Exact and RegEx matching are not sufficient for your purposes.
In your main plugin class file, simply add this function:
/**
* retourMatch gives your plugin a chance to use whatever custom logic is needed for URL redirection. You are passed
* in an array that contains the details of the redirect. Do whatever matching logic, then return true if is a
* matched, false if it is not.
*
* You can alter the 'redirectDestUrl' to change what URL they should be redirected to, as well as the 'redirectHttpCode'
* to change the type of redirect. None of the changes made are saved in the database.
*
* @param mixed An array of arguments that define the redirect
* $args = array(
* 'redirect' => array(
* 'id' => the id of the redirect record in the retour_redirects table
* 'associatedElementId' => the id of the entry if this is a Dynamic Entry Redirect; 0 otherwise
* 'redirectSrcUrl' => the legacy URL as entered by the user
* 'redirectSrcUrlParsed' => the redirectSrcUrl after it has been parsed as a micro template for {variables}
* via renderObjectTemplate(). This is typically what you would want to match against.
* 'redirectMatchType' => the type of match; this will be set to your plugin's ClassHandle
* 'redirectDestUrl' => the destination URL for the entry this redirect is associated with, or the
* destination URL that was manually entered by the user
* 'redirectHttpCode' => the redirect HTTP code (typically 301 or 302)
* 'hitCount' => the number of times this redirect has been matched, and the redirect done in the browser
* 'hitLastTime' => the date and time of the when this redirect was matched
* 'locale' => the locale of this redirect
* )
* );
* @return bool Return true if it's a match, false otherwise
*/
public function retourMatch($args)
{
return true;
}
Your plugin will then appear in the list of Pattern Match Types that can be chosen from via Retour->Redirects.
craft.retour.getHttpStatus in your templates will return the HTTP Status code for the current template, so you can display a special message for people who end up on a page via a 301 or 302 redirect.
Some things to do, and ideas for potential features:
- Release it
Brought to you by nystudio107