Roo

TL;DR

Roo is the opposite of Kubernetes. It's designed for sub-1 minute cluster setup times.

This basically lets you run your own encrypted and load balanced Amazon AWS clusters on your own hardware, and is a 5-minute replacement for Kubernetes, with no configuration (no additional setup for clustered kv stores, no janky config files, no defining providers, no dodgy second hand helm charts, no ssl setup, no manual ssl certification, no single point failures etc). You can setup a cluster, and publish a new domain in around 30 seconds (once you get the one time, 5 minute setup out of the way).

All you need to do is add a few lines to a docker-compose file and Roo does the rest see a full configuration example:

      OriginHosts: example.com,www.example.com
      OriginScheme: https
      OriginPort: 443
      DestinationHost: test_test
      DestinationScheme: http
      DestinationPort: 80

See a 5 minute line-by-line run-through example setup (includes setting up physical infrastructure, virtual docker swarm infrastructure, and roo cluster that runs on top of the swarm, that handles requests and passes it to your underlying clustered services)

Introduction

This aims to be a free replacement of Amazon's ECS (Elastic Compute Service), EKS (Kubernetes), CertificateManager, Load-Balancer and CloudWatch using your own Docker Swarm. It IS a complete replacement for nginx, traefik, haproxy, and a lot of kubernetes. The idea is to give developers back the power and take it back from ridiculous self-complicating dev-ops tools that get more complicated and less useful (for example Traefik 2 just removed support for clustered Letsencrypt from their open source version to spruik their enterprise version. Nginx and HAProxy do the same). I wasted a lot of time on their software before writing this. I truly hope it benefits others too.

If you are unfamiliar with swarm/kubernetes and are a developer and want a quick intro into how powerful and easy swarm can be, see how you can setup a thousand-machine cluster in just 20 lines (just copy + paste from there) or check out my command notes. In a day I was scaling clusters up and down on my own infrastructure with single commands.

The power Roo gives you is to add HTTPS://example1.com and HTTPS://example2.com to your clustered services with zero configuration. Let's encrypt allocates your service's certificates. It works across every machine, docker node, service, in your cluster.

Roo itself is clustered. Every machine it runs on shares the load to your services. It's distributed store shares certificates from Letsencrypt used across all your nodes. Now apple is denying certificates older than a year, I feel as a dev, that lets encrypt is almost mandatory as it creates a lot of admin.

Getting Started (on docker)

Want to just run it?

docker run sfproductlabs/roo:latest

Want to compile and run?

git mod download
make
# update the config if you need
sudo rood ./config.json

Run a cluster on docker swarm (trivial example)

docker swarm init
docker network create -d overlay --attachable forenet --subnet 192.168.9.0/24
#the following label notifies that we should put a single instnce of roo on machines/swarm-nodes with the label "load_balancer"
docker node ls -q | xargs docker node update --label-add load_balancer=true
docker stack deploy -c roo-docker-compose.yml --resolve-image never roo

Lets examine whats going on in docker swarm

# Diagnostic Functions:
docker stack ls
docker stack services roo
docker service inspect roo_roo
docker stats --no-stream
docker node ls
docker node inspect --pretty <NODE_NAME> 
# or for a single machine cluster
docker node ls -q | xargs docker node inspect --pretty
docker service ps roo_roo
docker service logs roo_roo -f
echo "docker service rm roo_roo # WARNING WILL REMOVE CLUSTER"
echo "docker stack rm roo # WARNING WILL REMOVE CLUSTER"

Cluster API Endpoints

Write a record to the KV Store - PUT http://localhost:6299/roo/v1/kvs/hop Ex. curl -X POST -i http://localhost:6299/roo/v1/kv/hop --data 'scotch'
Get a record from the KV Store - GET http://localhost:6299/roo/v1/kv/hopscotch
Search/Scan the KV Store - GET http://localhost:6299/roo/v1/kvs/hop
Get the Server Status - GET http://localhost:6299/roo/v1/status
Clear the Cluster/Servers - POST http://localhost:6299/roo/v1/rescue
Swarm Update - POST http://localhost:6299/roo/v1/swarm
Ping - GET http://localhost:6299/roo/v1/ping
Join a machine to the swarm - POST http://localhost:6299/roo/v1/join
Remove a machine from the swarm - POST http://localhost:6299/roo/v1/remove
Debug Cmdline - GET http://localhost:6299/debug/pprof/heap
Debug Profile - GET http://localhost:6299/debug/pprof/profile
Debug Symbols - GET http://localhost:6299/debug/pprof/symbol
Debug Trace - GET http://localhost:6299/debug/pprof/trace
Debug Indices - GET http://localhost:6299/debug/pprof/1
Delete a permission - DELETE http://localhost:6299/roo/v1/perm/user
Add a permission - PUT http://localhost:6299/roo/v1/perm
Check a permission - POST http://localhost:6299/roo/v1/perm

Getting Started With a Real Example (complete run-through example on Hetzner Cloud)

Setup the physical nodes

This will set you up with a cluster on Hetzner Cloud (change the first 20 lines to suit your own cloud provider). I use this on my own production servers. I don't love Hetzner - the service isn't as good as I'd like - but it is improving and is CHEAP (~$3 per server).

# mac
brew install hcloud 
brew install jq
#debian/ubuntu
#sudo apt install hcloud-cli jq
#create a project in hetzner called test (https://console.hetzner.cloud/projects)
#create a api key in the project you setup on hetzner
#hcloud context create test #connect the api key to the project
#test the connection
hcloud server-type list 
#start with an empty project (check this is empty)
hcloud server list 
hcloud ssh-key create --name andy --public-key-from-file ~/.ssh/id_rsa.pub  
hcloud network create --ip-range=10.1.0.0/16 --name=aftnet
hcloud network add-subnet --ip-range=10.1.0.0/16 --type=server --network-zone=eu-central aftnet
#If you want a lot more machines see the horizontal web scraper project commands (https://github.com/sfproductlabs/scrp)
#for n in {1..30}; do (hcloud server create --name docker$RANDOM$RANDOM$RANDOM$RANDOM --type cx11 --image debian-9 --datacenter nbg1-dc3 --network aftnet --ssh-key andy 2>&1 >/dev/null &) ; done
#watch -n 5 "echo "Press Ctrl-c to exit when your server count meets the desired amount. You will need to copy and paste just the following instructions to proceed." && hcloud server list | grep 'running' | awk 'END {print NR}'"
hcloud server create --name docker1 --type cx11 --image debian-9 --datacenter nbg1-dc3 --network aftnet --ssh-key andy 
hcloud server create --name docker2 --type cx11 --image debian-9 --datacenter nbg1-dc3 --network aftnet --ssh-key andy 
hcloud server create --name docker3 --type cx11 --image debian-9 --datacenter nbg1-dc3 --network aftnet --ssh-key andy 
rm *.txt
hcloud server list -o columns=name -o noheader > worker-names.txt
hcloud server list -o columns=ipv4 -o noheader > worker-ips.txt
cat worker-names.txt | xargs -I {} hcloud server describe -o json {} | jq -r '.private_net[0].ip' >> worker-vips.txt
hcloud server create --name manager1 --type cx11 --image debian-9 --datacenter nbg1-dc3 --network aftnet --ssh-key andy
hcloud server describe -o json manager1 | jq -r '.private_net[0].ip' > manager-vip.txt
scp -o StrictHostKeyChecking=no *.txt root@$(hcloud server list -o columns=ipv4,name -o noheader | grep manager1 | awk '{print $1}'):~/
scp -o StrictHostKeyChecking=no ansible/* root@$(hcloud server list -o columns=ipv4,name -o noheader | grep manager1 | awk '{print $1}'):~/
scp -o StrictHostKeyChecking=no *-docker-compose.yml root@$(hcloud server list -o columns=ipv4,name -o noheader | grep manager1 | awk '{print $1}'):~/

If it stuffs up run DANGEROUS it will delete all your servers for the project:

hcloud server list -o columns=name -o noheader | xargs -P 8 -I {} hcloud server delete {}

Setup the docker swarm

Get on the manager1 node:

#only required on a mac
eval `ssh-agent` && ssh-add ~/.ssh/id_rsa 
#now login to manager1
ssh -l root -A $(hcloud server list -o columns=ipv4,name -o noheader | grep manager1 | awk '{print $1}')

Then run:

apt-get update && \
apt-get upgrade -y && \
apt-get install apt-transport-https ca-certificates curl gnupg-agent software-properties-common -y && \
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add - && \
apt-key fingerprint 0EBFCD88 && \
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/debian $(lsb_release -cs) stable" && \
apt-get update && \
apt-get install docker-ce docker-ce-cli containerd.io ansible -y && \
docker swarm init --advertise-addr=ens10 && \
docker swarm join-token worker | xargs | sed -r 's/^.*(docker.*).*$/\1/' > join.sh && \
chmod +x join.sh && \
printf "\n[defaults]\nhost_key_checking = False\n" >> /etc/ansible/ansible.cfg && \
printf "\n[managers]\n" >> /etc/ansible/hosts && \
cat manager-vip.txt >> /etc/ansible/hosts && \
printf "\n[dockers]\n" >> /etc/ansible/hosts && \
cat manager-vip.txt >> /etc/ansible/hosts && \
cat worker-vips.txt >> /etc/ansible/hosts && \
printf "\n[workers]\n" >> /etc/ansible/hosts && \
cat worker-vips.txt >> /etc/ansible/hosts && \
ansible dockers -a "uptime" && \
printf "\n            $(cat join.sh | awk '{print $0}')" >> swarm-init.yml && \
ansible-playbook swarm-init.yml && \
ansible dockers -a "docker stats --no-stream" && \
docker node ls

Setup roo

#It's required to run roo on a manager node to get the automatic updates from the docker-compose files. You don't need to serve content from it though.
docker node update --label-add load_balancer=true manager1 && \
docker node update --label-add load_balancer=true docker1 && \
docker node update --label-add load_balancer=true docker2 && \
docker node update --label-add load_balancer=true docker3 && \
docker network create -d overlay --attachable forenet --subnet 192.168.9.0/24 && \
docker stack deploy -c roo-docker-compose.yml roo

You can watch roo boot & status using docker service logs roo_roo -f otherwise wait about a minute for the services & raft-log to auto-start.

Start a service (test)

Setup a test-domain and and IPs in your host-name record.
Edit test-docker-compose.yml and replace test.sfpl.io with the test-domain, (make sure to set it up in your host records and use a load-balancer!).

Then run:

docker stack deploy -c test-docker-compose.yml test

So long as you have your DNS setup, this will do:

IP & Service Failover
Get your HTTPS certificate for you automatically
Route & Load balance all the traffic through to your services.

Go to your domain. All Done

Debug

Check roo's distributed keystore

docker run -it --net=forenet alpine ash
apk add curl
curl -X GET http://tasks.roo_roo:6299/roo/v1/kvs

Check the service log

docker service logs roo_roo -f
docker service ps roo_roo

Check using Ansible

ansible workers -a "ip addr"

More Help

Check the FAQ

Getting Started (on swarm)

Run this all in the docker swarm manager look here to get started.

Create the default network, for example:

docker network create -d overlay --attachable forenet --subnet 192.168.9.0/24

Add label to the nodes you want to run it on (load_balancer describes the label for roo to attach to):

docker node update --label-add load_balancer=true docker1-prod

You'll need to run roo on at least one manager node if you want docker services to auto-sync with Let's Encrypt. Don't worry though as this is not a security issue like in other platforms (like Traefik) as the manager node need not be publicly accessible.
Run the docker-compose file on swarm (WARNING: LetsEncrypt hates load, so update the ROO_ACME_STAGING=true if you plan to muck about):

# docker stack deploy -c roo-docker-compose.yml roo

It takes a minute to bootstrap
Notice the roo images are available at dockerhub sfproductlabs/roo:latest. I don't use the Github repository service as it requires a key to just get the image.
Then in your own docker-compose file do something like (note the label used in the zeroconfig, and the destination, its usually swarmstack_swarmservicename):

version: "3.7"
services:
  test:
    image: test
    deploy:
      replicas: 1
    networks:
      - forenet
    labels:
      OriginHosts: test.sfpl.io
      DestinationHost: test_test
      DestinationScheme: http
      DestinationPort: 80
    
networks:
  forenet:
    external: true

NOTE: Give it a minute before you query your service, as the service blocks unknown traffic (the docker watcher updates every 30 seconds or so, and it will need a bit to find your new service). JOB DONE!

Zeroconfig of docker swarm services

You need to tell roo what the incoming hostname etc is and where to route it to in the docker-compose file (if you want to go fully automoatic)

Letsencrypt caveats

Please be extremely careful, letsencrypt/acme have weekly limits (which are super low) that will ban you from getting certificates for a week. Please use the staging setting in the roo-docker-compose-file.

https://letsencrypt.org/docs/rate-limits/

Going Manual

Roo comes with a clustered Distributed Key-Value (KV) Store (See the API below for access). You can use this to manually configure roo. To add the route and do the zeroconfig example above manually, do this instead:

You'll need to first deploy the test stack

docker stack deploy -c test-docker-compose.yml test

Then let roo know the route (do this inside any machine in the forenet network):

curl -X PUT roo_roo:6299/roo/v1/kv/com.roo.host:test.sfpl.io:https -d 'http://test_test:80'

Building from source

You need to get the dependencies. Check the roo-docker-compose.yml file for a current list.
Run make in the root directory (not the roo directory).

Schema Definitions

Adding a route to the routing table

Use the Put API below

com.roo.host:<requesting_host<:port (optional)>:scheme>  <destination_url>

See an example

API

Post a single key to the distributed store

curl -X PUT -d'test data' http://localhost:6299/roo/v1/kv/test

Returns a json object { "ok" : true} if succeded

A Real Example Route

Put in a test route. For our example we are serving goole.com at our public endpoint, and routing to a swarm service with an endpoint inside our network on port 9001. The swarm stack is cool, the swarm service name is game. In docker swarm world this equates to a mesh network load balanced DNS record of tasks.cool_game. (you'll need to find your stack, service, and replace that and port 9001 with your details to get it working). The overall result to add this to our routing tables is:

curl -X PUT -d'http://tasks.cool_game:9001' http://localhost:6299/roo/v1/kv/com.roo.host:google.com:https

Note: as we don't specify a port in our requests we remove the optional port :443

To test you can run something like this (this just makes your localhost pretend like its responding to a request to google.com): curl -H "Host: google.com" https://localhost/

So to summarize, google.com:443 is the incoming route to roo from the internet, and tasks.cool_game:9001 is your service and port to your internal service (in this case its an internal intranet docker swarm service).

Get a SINGLE key from the store

curl -X GET http://localhost:6299/roo/v1/kv/test

Returns the raw bytes (you'll see this as a string if you stored it like that)

List multiple keys from the store (Using a SCAN/Prefix filter query)

curl -X GET http://localhost:6299/roo/v1/kvs/te #Searches the prefix _te_
curl -X GET http://localhost:6299/roo/v1/kvs/tes #Searches the prefix _tes_
curl -X GET http://localhost:6299/roo/v1/kvs/test #Searches the prefix _test_
curl -X GET http://localhost:6299/roo/v1/kvs #Gets everything in the _entire_ kv store (filter is on nothing)

Returns the rows searched using the SCAN query (in KV land its a prefix filter) in JSON
The resulting values are encoded in base64, so you may need to convert them (unlike the GET single query above which returns raw bytes)
Use window.atob("dGVz......dCBkYXRh") in javascript. Use json.Unmarshall or string([]byte) in Golang Go if you want a string... OR just use GET instead.

Setting a permission

Note : The rune is a single character (G,F,R etc.) KEEP LOWER CASE. Use 'G'.charCodeAt(0) to get int32 for javascript

curl -X PUT -i http://localhost:6299/roo/v1/perm --data '[{ 
  "Entity" : { "Val" : "dioptre", "Rune" : 117},
  "Context" : { "Val" : "/folder1", "Rune" : 102},  
  "Right" : [4],
  "Delete" : false
},{ 
  "Entity" : { "Val" : "marketing", "Rune" : 103},
  "Context" : { "Val" : "/folder1/folder2", "Rune" : 102},
  "Action" : { "Val" : "push_pr", "Rune" : 114},
  "Delete" : false
},{ 
  "Entity" : { "Val" : "admins", "Rune" : 103},
  "Context" : { "Val" : "/folder1/folder2", "Rune" : 102},
  "Right" : [4],
  "Delete" : false
}]'

Permission Request

curl -X POST -i http://localhost:6299/roo/v1/perm --data '{ 
  "User" : { "Val" : "dioptreX", "Rune" : 117},
  "Entities" : [ { "Val" : "admins", "Rune" : 103}, { "Val" : "marketing", "Rune" : 103}],
  "Resource" : { "Val" : "/folder1/folder2/wb1", "Rune" : 102},  
  "Right" : [4]
}
'

Another using Action:

curl -X POST -i http://localhost:6299/roo/v1/perm --data '{ 
  "User" : { "Val" : "dioptreX", "Rune" : 117},
  "Entities" : [ { "Val" : "marketing", "Rune" : 103}],
  "Resource" : { "Val" : "/folder1/folder2/wb1", "Rune" : 102},
  "Action" : { "Val" : "push_pr", "Rune": 114 }
}'

Help!

FAQ

It hangs

You've reached the maximum requests to LetsEncrypt probably. You can check this by running curl -X GET http://localhost:6299/roo/v1/kvs/ and finding com.roo.cache:your.domain.com. If it exists it's not this.
Or your stack_service name isn't correct (the DestinationHost label in your docker-compose file).

I don't see my site!

You may have tried to go to the site before the service updated the docker routing table (it updates every 60 seconds). If you went to your site before it updates, roo thinks that your domain is a dodgy request and puts similar requests in the bin for 4 minutes.

Something might be up!

Get a status of your containers (you first need to get ansible, and add your docker nodes to the docker-hosts group [you may need to look into ssh-agent too]):

ansible docker-hosts -a "docker stats --no-stream"

Or go deeper:

ansible docker -a "bash -c 'ps waux'" | grep -E "(rood)"

This will get a realtime snapshot on all your machines in your swarm.

Get some profiling info

NOTE: This might be removed in a future release, but it's super useful now

Install golang on a computer in your network and get profiler insights (see more https://golang.org/pkg/runtime/pprof/):

On swarm run go tool pprof http://roo_roo_host_from_internal_forenet_network:6299/debug/pprof/heap then type svg (or output to something you may like better).

On my local development machine I do:

go tool pprof http://localhost:6299/debug/pprof/heap?debug=1

then type:

(pprof) svg

Or for intermittent results

Run from source directory (./roo):

mkdir pprof
cd pprof
curl http://localhost:6299/debug/pprof/heap > heap.0.pprof
sleep 30
curl http://localhost:6299/debug/pprof/heap > heap.1.pprof
sleep 30
curl http://localhost:6299/debug/pprof/heap > heap.2.pprof
sleep 30
curl http://localhost:6299/debug/pprof/heap > heap.3.pprof

Then:

go tool pprof pprof/heap.3.pprof
(pprof) top20
(pprof) list NewWriterSize

Or for manual results

Go to http://roo_roo_host_from_internal_forenet_network:6299/debug/pprof/

Get detailed memory info using Valgrind

The docker image contains apt install valgrind

Run:

#valgrind --tool=memcheck --vgdb=yes --leak-check=yes --track-origins=yes --progress-interval=600 /app/roo/rood /app/roo/roo/config.json

Then run gdb (you may need to apt install gdb on swarm node first):

#gdb /app/roo/rood
(gdb) target remote | vgdb
(gdb) set logging on
(gdb) set logging redirect on
(gdb) set logging overwrite on
(gdb) set logging debugredirect on
(gdb) show logging
(gdb) monitor leak_check full reachable any

Or alternatively pipe it to a gdb.txt logfile:

gdb -c /app/roo/rood -ex "target remote | vgdb" -ex "set logging on" -ex "set logging redirect on" -ex "set logging debugredirect on" -ex "set logging overwrite on" -ex "monitor leak_check full reachable any" -ex detach -ex quit 0 2>&1 >/dev/null

Inspecting the roo containers

Inspect the logs

docker service logs roo_roo -f

Inspect the containers

docker run -it --net=forenet alpine ash
nslookup tasks.roo_roo.
curl -X GET http://<result_of_nslookup>:6299/roo/v1/kvs

Andrew's DevOps Setup (Yuck! But we have to do it)

I use floating IPs that transition from swarm worker to swarm worker upon failure. (Highly Available)
with round robin DNS (setup a few workers and share the IPs) (Load Balanced, a bit dodgy but works)
You need to make the swarm redundant with more than one node, the mesh network load balances internally. Make it more than 2 nodes so that the raft cluster doesn't fight over leadership. Odd numbers are great. (HA & LB)
It may not cost as much as an AWS ELB, but it probably won't saturate either. Yes, I've run into issues where you need to "warm up" the Amazon elastic load balancer before. I wouldn't be surprised if this handled as much traffic without the cost.
No need to say this is $$$$ cheap. I'm saving 10x as much as I would be if I used Amazon AWS using this setup. It's nice to give my startups the same tech my enterprise clients get, but they can actually afford. I don't want to share which cloud provider I used as it took 30 days to request 1 extra machine. But it was cheap. Let us all know if you find something better! You can get these benefits too if you look!
Add a loopback in macOS ifconfig lo0 alias 127.0.0.2

TODO

Support

Roo is in use commercially and in production. If you want support, email us at [email protected].

Name		Name	Last commit message	Last commit date
Latest commit History 388 Commits
.vscode		.vscode
ansible		ansible
keys		keys
misc		misc
roo		roo
tests		tests
.gitignore		.gitignore
.gitmodules		.gitmodules
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
benchmark.sh		benchmark.sh
build.sh		build.sh
debug.sh		debug.sh
distrib.sh		distrib.sh
dockercmd.sh		dockercmd.sh
gdebug.sh		gdebug.sh
gencerts.sh		gencerts.sh
go.mod		go.mod
go.sum		go.sum
nats-docker-compose.yml		nats-docker-compose.yml
roo-docker-compose.yml		roo-docker-compose.yml
run.sh		run.sh
swarm.sh		swarm.sh
test-docker-compose.yml		test-docker-compose.yml
test.sh		test.sh
wait-for		wait-for

License

sfproductlabs/roo

Folders and files

Latest commit

History

Repository files navigation

Roo