clj-new

Generate new projects from Leiningen or Boot templates, or clj-template projects, using just the clojure command-line installation of Clojure!

For support, help, general questions, use the #deps-new channel on the Clojurians Slack.

Getting Started

Note: these instructions assume you are using the Clojure CLI version 1.10.3.933 or later! See Clojure Tools Releases for details about the functionality in recent CLI releases. Projects generated by clj-new also assume at least version 1.10.3.933!

If you want to create basic application or library projects, or you want to develop your own templates, I recommend looking at deps-new which is a simpler, newer project, based around tools.build.

Installation as a Tool

The easiest way to use clj-new is by installing it as a "tool" instead of updating your deps.edn file and then invoke it using the following commands:

# one-off to install clj-new as a tool:
clojure -Ttools install-latest :lib com.github.seancorfield/clj-new :as clj-new

Note: older versions of this documentation -- and some public templates' documentation -- showed installation :as new but that is the alias recommended for deps-new so this project now recommends :as clj-new instead, to avoid conflicts.

# commands to create new projects:

# create a new app:
clojure -Tclj-new app :name myname/myapp
# create a new library:
clojure -Tclj-new lib :name myname/mylib
# create a new template:
clojure -Tclj-new template :name myname/mytemplate
# create a new project from a public template:
clojure -Tclj-new create :template electron-app :name myname/myelectron-app

Note: if you have created a new project from a public template, follow the instructions for that template on how to use and run the project -- all templates are different! The built-in app, lib, and template projects are described briefly below but also have their own README files in their newly created projects.

You can get help about the functions available in clj-new:

clojure -A:deps -Tclj-new help/doc

Note: if you are on Windows, read Quoting keys and values in the official Deps and CLI Reference documentation to understand how the above commands need to look on Powershell. Or take a look at the Babashka CLI library support.

Installation via `deps.edn`

If you don't want to install clj-new as a "tool", you can add an alias to your ~/.clojure/deps.edn file (or ~/.config/clojure/deps.edn file) like this:

    ;; add this inside your :aliases map:
    :clj-new {:extra-deps {com.github.seancorfield/clj-new
                           {:mvn/version "1.3.415"}}
              :exec-fn clj-new/create
              :exec-args {:template "app"}}

A minimal, complete deps.edn file with just this :clj-new alias would look like this:

{:aliases
 {:clj-new {:extra-deps {com.github.seancorfield/clj-new {:mvn/version "1.3.415"}}
            :exec-fn clj-new/create
            :exec-args {:template "app"}}}}

Now you can create a basic application:

    clojure -X:clj-new :name myname/myapp
    cd myapp
    clojure -M -m myname.myapp

Run the tests:

    clojure -T:build test

or you can create a basic library:

    clojure -X:clj-new :template lib :name myname/mylib
    cd mylib

Run the tests:

    clojure -T:build test

If you think you are going to be creating more libraries than applications, you could specify :template "lib" in the :exec-args hash map, to specify the default. Or you could provide different aliases, such as:

      ;; add these into your :aliases map:
      :new-app {:extra-deps {com.github.seancorfield/clj-new
                             {:mvn/version "1.3.415"}}
                :exec-fn clj-new/create
                :exec-args {:template "app"}}
      :new-lib {:extra-deps {com.github.seancorfield/clj-new
                             {:mvn/version "1.3.415"}}
                :exec-fn clj-new/create
                :exec-args {:template "lib"}}}

Now you can use those as follows:

    clojure -X:new-app :name myname/myapp
    clojure -X:new-lib :name myname/mylib

Babashka CLI

The babashka CLI library allows you to call an -X (exec) function in a more Unixy way, without writing EDN on the command line. If you are dealing with quoting issues in your shell, this could be a viable alternative:

       :clj-new {:deps {org.babashka/cli {:mvn/version "0.2.14"}
                        com.github.seancorfield/clj-new {:mvn/version "1.3.415"}}
                 :exec-fn clj-new/create
                 :exec-args {:template "app"
                             :env {:group io.github.myuser}}
                 :main-opts ["-m" "babashka.cli.exec"]}

Note that we no longer need quotes to call the same exec function:

$ clj -M:clj-new --name foo/bar --args 1 2 3 --query
Will create the folder: bar
From the template: app
Passing these arguments: 1 2 3
The following substitutions will be used:
{:date "2022-06-05",
 :group io.github.myuser,
 :name "bar",
 :sanitized "bar",
 :year 2022,
 :scm-domain "github.com",
 :template-nested-dirs "{{nested-dirs}}",
 :artifact "bar",
 :developer "Borkdude",
 :nested-dirs "foo/bar",
 :version "0.1.0-SNAPSHOT",
 :namespace "foo.bar",
 :user "borkdude",
 :scm-user "foo",
 :raw-name "foo/bar"}

Options for `clj-new/create`

The following :exec-args can be provided for clj-new/create:

:name -- the name of the project (as a symbol or a string); required; must be a qualified project name or a multi-segment dotted project name
:template -- the name of the template to use (as a symbol or a string); required
:args -- an optional vector of strings (or symbols) to pass to the template itself as command-line argument strings
:edn-args -- an optional EDN expression to pass to the template itself as the arguments for the template; takes precedence over :args; nearly all templates expect a sequence of strings so :args is going to be the easiest way to pass arguments
:env -- a hash map of additional variable substitutions in templates (see The Generated pom.xml File below for a list of "built-in" variables that can be overridden)
:force -- if true, will force overwrite the target directory if it exists
:help -- if true, will provide a summary of these options as help
:output -- specify the project directory to create (the default is to use the project name as the directory)
:query -- if true, instead of actually looking up the template and generating the project, output an explanation of what clj-new will try to do
:snapshot -- if true, look for -SNAPSHOT version of the template (not just a release version)
:verbose -- 1, 2, or 3, indicating the level of debugging in increasing detail
:version -- use this specific version of the template, e.g., '"1.2.3"' (remember that strings need to be 'quoted' as exec args)

Project Names

Unlike Leiningen, clj-new requires that you use either a qualified name for your project, such as <username>/<project-name> or <org-name>/<project-name>, or a dotted name, such as my.project.

If you are going to publish a library, it will have a group ID and an artifact ID (e.g., com.github.seancorfield/clj-new) and the group ID should be something unique to you or your organization -- most people use their GitHub username or their company name (i.e., their domain name in reverse, e.g., com.stuartsierra/component). The qualified name you provide to clj-new is effectively group/artifact (but keep reading!). clj-new uses that to create the main namespace: src/group/artifact.clj containing (ns group.artifact ...) -- this ensures that when someone uses your library, it's not going to clash with other code because the first portion of the namespace should be something unique to you or your organization.

If you plan on publishing your library to clojars.org your project should have a group ID that follows the Clojars Verified Group Names policy. If you use myname/mylib as your project name, clj-new will generate a pom.xml file with a group ID of net.clojars.myname and assume the library source will live at https://github.com/myname/mylib (so that clojure -T:build ci and clojure -T:build deploy will "do the right thing" by default). The main namespace will be myname.mylib, in src/myname/mylib.clj. See The Generated pom.xml File below for more details about group and artifact IDs.

If you use com.github.myname/mylib as your project name, clj-new will use com.github.myname as the group ID and mylib as the artifact ID but will use myname.mylib as the primary namespace, in src/myname/mylib.clj, rather than src/com/github/myname/mylib.clj (and com.github.myname.mylib). You should think about whether myname.mylib is unique enough that users of your library will not encounter conflicts with namespaces in other libraries. clj-new also understands io.github.myname, com.gitlab.myname, and io.gitlab.myname in project names.

It's good practice to follow this convention even if you are creating an application, or a library that you don't plan to publish, because it will mean that your code is much less likely to clash with any libraries your code uses.

If you're unsure about how clj-new will compute the group, artifact, main namespace, and so on, you can use the :query true option, and clj-new will print out what it will do:

$ clojure -Tclj-new lib :query true :name myname/myproj
Will create the folder: myproj
From the template: app
The following substitutions will be used:
{:date "2021-03-02",
 :group "net.clojars.myname",
 :name "myproj",
 :sanitized "myproj",
 :year 2021,
 :scm-domain "github.com",
 :template-nested-dirs "{{nested-dirs}}",
 :artifact "myproj",
 :developer "Seanc",
 :nested-dirs "myname/myproj",
 :version "0.1.0-SNAPSHOT",
 :namespace "myname.myproj",
 :user "seanc",
 :scm-user "myname",
 :raw-name "myname/myproj"}

# or:

$ clojure -X:clj-new :query true :name myname/myproj

You can use the :env option to pass in a hash map of substitutions to override any of these.

Note: lein new myapp will treat myapp as both the group ID and the artifact ID, which is why a lot of older Clojure libs just have an unqualified lib name, like ring -- but really it's ring/ring and recent versions of the Clojure CLI display a deprecation warning on just ring: see the Deprecated unqualified lib names section near the end of this Inside Clojure post about the -X option. Leiningen also stuck .core onto your project name to create the main namespace, which is why a lot of older Clojure libs have a something.core namespace: just because Leiningen did that by default. Both default behaviors here are bad because they're likely to lead to conflicts with other libraries.

You can get something close to Leiningen's default behavior by specifying a dotted project name that ends in .core, e.g., clojure -Tclj-new lib :name foo.core. That will create a folder called foo.core and the project will have a group ID of net.clojars.foo and an artifact ID of foo.core -- which is similar behavior to running lein new foo.core but complies with Clojars' Verified Group Names policy -- with a main namespace of foo.core in src/foo/core.clj. [lein new foo creates a folder called foo and the project has a group ID of foo and an artifact ID of foo, even though the main namespace will be foo.core].

Templates

Built-in templates are:

app -- A minimal Hello World! application with deps.edn. Can run it via clojure -M -m and can test it with clojure -T:build test.
lib -- A minimal library with deps.edn. Can test it with clojure -T:build test.
polylith -- A minimal Polylith workspace with a minimal application project and a minimal library project (new in 1.1.293).
template -- A minimal clj-new template.

Third-party templates

Third-party templates can be used like this:

clojure -Tclj-new create :template clj-py-r-template :name myname/mylib

This requires that the naming conventions for templates are followed, and one of the following templates exists in the remote repository (Maven, Clojars, etc):

clj-py-r-template/clj-template
clj-py-r-template/lein-template
clj-py-r-template/boot-template

If your template name is a qualified symbol, such as us.technomancy/liquid-cool, the following templates are searched for:

us.technomancy/clj-template.liquid-cool
us.technomancy/lein-template.liquid-cool
us.technomancy/boot-template.liquid-cool

Leiningen's documentation has a detailed explanation of how template names map to group and artifact IDs. Boot does not yet support qualified template names.

Note: you can currently find third-party templates on Clojars using these searches <template-name>/clj-template, <template-name>/lein-template or <template-name>/boot-template. The project created from each template is likely to be different -- maybe project.clj, maybe deps.edn, maybe something else -- consult the template's documentation on how to use the newly created project!

As noted above, the project name should be a qualified Clojure symbol, where the first part is typically your GitHub account name or your organization's domain reversed, e.g., com.acme, and the second part is the "local" name for your project (and is used as the name of the folder in which the project is created), e.g., com.acme/my-cool-project. This will create a folder called my-cool-project and the main namespace for the new project will be com.acme.my-cool-project, so the file will be src/com/acme/my_cool_project.clj. In the generated pom.xml file, the group ID will be com.acme and the artifact ID will be my-cool-project -- following this pattern means you are already set up for publishing to Clojars (or some other Maven-like repository).

An alternative is to use a multi-segment project name, such as com.acme.another-project. This will create a folder called com.acme.another-project (compared to above, which just uses the portion after the /). The main namespace will be com.acme.another-project in src/com/acme/another_project.clj, similar to the qualified project name above. In the generated pom.xml file, the group ID will be the "stem" of the project name (com.acme) and the artifact ID will be the full project name (com.acme.another-project) -- again, you'll be set up for publishing to Clojars etc, but be aware of the difference between how dotted names and qualified names affect the generated project. As noted above, you can override any of these subsitutions using the :env option, if you need to.

$ clojure -Tclj-new create :query true :name com.acme.another-project
Will create the folder: com.acme.another-project
From the template: app
The following substitutions will be used:
{:date "2021-03-02",
 :group "com.acme",
 :name "com.acme.another-project",
 :sanitized "com.acme.another_project",
 :year 2021,
 :scm-domain "github.com",
 :template-nested-dirs "{{nested-dirs}}",
 :artifact "com.acme.another-project",
 :developer "Seanc",
 :nested-dirs "com/acme/another_project",
 :version "0.1.0-SNAPSHOT",
 :namespace "com.acme.another-project",
 :user "seanc",
 :scm-user "com.acme",
 :raw-name "com.acme.another-project"}

You can, of course, modify the generated pom.xml file to have whatever group and artifact ID you want, if you don't like these defaults.

The `app` Template

The generated project is an application. It has a -main function in the main project namespace, with a (:gen-class) class in the ns form. In addition to being able to run the project directly (with clojure -M -m myname.myapp) and run the tests, you can also build an uberjar for the project with clojure -T:build ci, which you can then run with java -jar target/myapp-0.1.0-SNAPSHOT.jar.

The `lib` Template

The generated project is a library. It has no -main function. In addition to being able to run the tests, you can also build a jar file for deployment with clojure -T:build ci. You will probably need to adjust some of the information inside the generated pom.xml file before deploying the jar file.

The generated project includes a pom.xml file on the assumption that you will be deploying the library to Clojars or a similar repository. It will be kept in sync with deps.edn automatically whenever you run clojure -T:build ci to build the library and it will be added to the JAR file. If you do not intend to deploy the library, you can delete the pom.xml file.

If you are going to deploy the library, you'll probably want to review and adjust some of the fields in the pom.xml (developer information, group/artifact, version, SCM, licensing etc) -- although the defaults should mostly be suitable out of the box.

Once you've updated the pom.xml file, you can install it locally with clojure -T:build install or deploy it to Clojars with clojure -T:build deploy. For that you need these environment variables set:

CLOJARS_USERNAME -- your Clojars username
CLOJARS_PASSWORD -- your Clojars password

The `polylith` Template

Whilst you can create a new Polylith workspace with the poly create workspace command, that produces a completely empty workspace skeleton. This clj-new template produces a workspace that has some example code in it:

bases -- contains a command-line API (cli)
components -- contains a simple component (greeter interface and implementation)
projects -- contains a simple application, based on cli and greeter, and a simple library, based on greeter

The generated README shows how you can run tests, build an uberjar, and build a library JAR.

See the Polylith documentation for more details.

The `template` Template

The generated project is a very minimal clj-template. It has no -main function and has no tests. You can however build a jar file for deployment with clojure -T:build ci. You will probably need to adjust some of the information inside the generated pom.xml file before deploying the jar file.

Note: when you create a template project called myname/mytemplate, you will get a folder called mytemplate and the pom.xml file will specify the group/artifact as net.clojars.myname/clj-template.mytemplate which is a convention supported by clj-new.

As with the lib template, this template includes a pom.xml to make it easier to deploy the template as a library. Once you have reviewed and possibly updated the pom.xml file, you can install it locally or deploy it to Clojars, via the appropriate aliases.

The Generated `pom.xml` File

Each of the built-in templates produces a project that contains a pom.xml file, which is used to build the uberjar (app) or jar file (lib and template), as well as guide the deployment of the latter two. If you don't plan to deploy the library or template, or you just don't want a pom.xml lying around for your application, you can delete it.

The goal is such that if you used an appropriate myname/myapp style name for the project that you asked clj-new to create, then most of the fields in the pom.xml file should be usable as-is.

You can override the default value of several fields in the pom.xml file using the :env exec-arg to clj-new/create as a hash map:

:group -- defaults to the myname portion of myname/myapp (but see below),
:artifact -- defaults to the myapp portion of myname/myapp,
:version -- defaults to "0.1.0-SNAPSHOT",
:description -- defaults to "FIXME: my new ..." (application, library, or template),
:developer -- defaults to a capitalized version of your computer's logged in username.
:scm-domain -- defaults to github.com (but see below); used in all the SCM links in the generated projects: https://{{scm-domain}}/{{scm-user}}/{{artifact}}
:scm-user -- defaults to (part of) the group name (but see below); used in all the SCM links in the generated projects: https://{{scm-domain}}/{{scm-user}}/{{artifact}}

Note: clj-new tries to conform to the Clojars Verified Group Names policy -- which is similar to Maven Central's policy about group IDs -- by setting the default for :group to be something that seems to be a reverse domain name. If you use myname/myapp for your project name, the default for :group will be net.clojars.myname, :artifact will be myapp, :scm-domain will be github.com, and :scm-user will be myname. If you use com.github.myname/myapp for your project name, the default for :group will be com.github.myname, :artifact will be myapp, :scm-domain will be github.com, and :scm-user will be myname. clj-new also recognizes io.github, com.gitlab, and io.gitlab prefixes. The latter two will cause :scm-domain to default to gitlab.com. If your project name seems to have a group name that could be a reverse domain name, then it will be accepted as is, e.g., com.acme/myapp would produce :group "com.acme", :artifact "myapp", :scm-domain "github.com", :scm-user "com.acme".

The :description field is also used in the generated project's README.md file.

Example:

    clojure -Tclj-new app :name myname/myapp :env '{:group "com.acme" :artifact my-cool-app :version "1.2.3" :scm-user myusername}'

This creates the same project structure as in the earlier myname/myapp example except that the generated pom.xml file will contain:

  <groupId>com.acme</groupId>
  <artifactId>my-cool-app</artifactId>
  <version>1.2.3</version>
  <name>myname/myapp</name>
  <description>FIXME: my new application.</description>
  <url>https://github.com/myusername/my-cool-app</url>
  ...
  <scm>
    <url>https://github.com/myusername/my-cool-app</url>
    <connection>scm:git:git://github.com/myusername/my-cool-app.git</connection>
    <developerConnection>scm:git:ssh://[email protected]/myusername/my-cool-app.git</developerConnection>
    <tag>v1.2.3</tag>
  </scm>

The Generated `LICENSE` File

The generated projects (from the built-in app, lib, and template templates) all contain a LICENSE file which is the Eclipse Public License (version 1.0) and that is also mentioned in the generated README.md files. This is a tradition that started with Leiningen's lein new and carried over into boot new and now clj-new. The idea is that it's better to ensure any open source projects created have a valid license of some sort, as a starting point, and historically most Clojure projects use the EPLv1.0 because Clojure itself and the Contrib libraries have all used this license for a long time.

You are not required to open source your generated project! Just because the projects are generated with an open source LICENSE file and have a License section in their README.md files does not mean you need to keep that license in place.

You are not required to use EPLv1.0 for your project! If you prefer a different license, use it! Replace the LICENSE file and update the README.md file to reflect your personal preference in licensing (I have tended to use the Apache License 2.0 in most of my open source projects, prior to working with Clojure, but see Prefer the MIT License for an alternative viewpoint from the folks who wrote XTDB).

Note: if you incorporate any source code from other people's open source projects, be aware of the legal implications and that you must respect whatever license they have used for that code (which may require you to release your enhancements under the same license and will, most likely, require you to include their copyright notices, etc). Do not copy other people's code without attribution!

General Template Usage

The general form of the command is:

clojure -Tclj-new create :template template-name :name project-name :args '[arg1 arg2 arg3 ...]'

As noted above, project-name should be a qualified symbol, such as mygithubusername/my-new-project, or a multi-segment symbol, such as my.cool.project. Some templates will not work with the former but it is recommended you try that format first.

If template-name is not one of the built-in ones (or is not already on the classpath), clj-new will attempt to find it on Clojars or Maven Central (or any other :mvn/repos you have configured) in the following manner:

If template-name is a qualified name, some.group/example, look for:
- some.group/clj-template.example, then
- some.group/boot-template.example, then
- some.group/lein-template.example,
Else, for an unqualified name, look for:
- template-name/clj-template, then
- template-name/boot-template, then
- template-name/lein-template.

Currently, Boot and Leiningen only support the second form, with an unqualified template-name (Leiningen is adding support for the qualified form). Historically, clj-new also only supported the unqualified template-name but as of 1.1.264 the qualified name is also supported so that templates can have group names that follow the Clojars Verified Group Names policy and artifact names that start with clj-template..

clj-new should be able to run any existing Leiningen or Boot templates (if you find one that doesn't work, please tell me about it!) -- with the caveat that some Leiningen and Boot templates do not accept a qualified project name and so you must use a dotted project name instead.

clj-new will generate a new project folder based on the project-name containing files generated from the specified template-name. It does that by requiring clj.new.<template-name> (or boot.new.<template-name> or leiningen.new.<template-name>) and invoking the <template-name> function inside that namespace, passing in <project-name> and those arguments from the command line.

Alternatively, template-name can be a :git/url and :sha like this:

clojure -Tclj-new create :template '"https://github.com/somename/someapp@c1fc0cdf5a21565676003dbc597e380467394a89"' \
  :name project-name :args '[arg1 arg2 arg3 ...]'

In this case, clj.new.someapp must exist in the template and clj.new.someapp/someapp will be invoked to generate the template. A GitHub repository may include multiple templates, so you can also use this form:

clojure -Tclj-new create :template '"https://github.com/somename/somerepo/someapp@c1fc0cdf5a21565676003dbc597e380467394a89"' \
  :name project-name :args '[arg1 arg2 arg3 ...]'

somename/somerepo here contains templates in subdirectories, including someapp. Again, clj.new.someapp must exist in the template in that subdirectory and clj.new.someapp/someapp will be invoked to generate the template.

Or, template-name can be a :local/root and template name like this:

clojure -Tclj-new create :template '"/path/to/clj-template::new-app"' \
  :name project-name :args '[arg1 arg2 arg3 ...]'

In this case, clj.new.new-app must exist in the template and clj.new.new-app/new-app will be invoked to generate the template.

Note: since the :git/url and :local/root forms of :template cannot be provided as Clojure symbols, they must be provided as Clojure strings, with "...", and those must be quoted for the shell correctly, with '...' around the string.

If the folder for project-name already exists, clj-new will not overwrite it unless you specify the :force option.

Example Usage

Here are some examples, generating projects from existing templates:

    clojure -Tclj-new create :template luminus :name yourname/example.webapp :output mywebapp :args '[+http-kit +h2 +reagent +auth]'

This creates a folder called mywebapp with a Luminus web application that will use http-kit, the H2 database, the Reagent ClojureScript library, and the Buddy library for authentication. The -main function is in yourname.example.webapp.core, which is in the mywebapp/src/clj/yourname/example/webapp/core.clj file. Note that the Luminus template produces a Leiningen-based project, not a CLI/deps.edn one, but you can also tell it to produce a Boot-based project (with +boot).

    clojure -Tclj-new create :template re-frame :name yourname.spa :output front-end :args '[+garden "+10x" +routes]'

This creates a folder called front-end with a ClojureScript Single Page Application that uses re-frame for state management, Garden for CSS, re-frame-10x for debugging, and bidi + pushy for routing. The entry point is in the yourname.spa.core namespace which is in the front-end/src/cljs/yourname/spa/core.cljs file. The re-frame template produces a shadow-cljs project, not a CLI/deps.edn one. Note that +10x needs to be quoted, because it is not a valid EDN symbol.

Note: the re-frame template (a Leiningen template) does not support qualified project names so you have to use a dotted name instead -- yourname/spa would produce an invalid shadow-cljs.edn file in the project.

    clojure -Tclj-new create :template electron-app :name yourname/example

This creates a folder called example with a skeleton Electron application, using Figwheel and Reagent. The entry point is in the example.main.core namespace which is in the example/src/main/example/main/core.cljs file. This Electron template produces a CLI/deps.edn-based project.

In general, consult the documentation for the template you used for how the newly created project works. Generally, Leiningen templates produce Leiningen projects (with a project.clj file), Boot templates produce Boot projects, and a clj-template will produce a CLI / deps.edn project. Some templates support multiple build tools. Some projects don't support any of these and use some other build tool.

`clj` Templates

clj templates are very similar to Leiningen and Boot templates but have an artifact name based on clj-template instead of lein-template or boot-template and use clj instead of leiningen or boot in all the namespace names. In particular the clj.new.templates namespace provides functions such as renderer and ->files that are the equivalent of the ones found in leiningen.new.templates when writing a Leiningen Template (or boot.new.templates when writing a Boot Template). The built-in templates are clj templates, that produce clj projects with deps.edn files.

If your template project name is myname/foo-bar, then you should have clj.new.foo-bar as the main namespace and it should contain a foo-bar function that will render the template:

;; src/clj/new/foo_bar.clj:
(ns clj.new.foo-bar ,,,)

(defn foo-bar
  "Generate a cool new foo bar project!"
  [name & args]
  ,,,)

When you publish it to Clojars, it should have an appropriate (reverse domain name) group ID and the artifact ID should match the template name preceded by clj-template.: net.clojars.myname/clj-template.foo-bar. If you expect people to depend on the template via GitHub, you should also name the repo foo-bar so that https://github.com/<username>/foo-bar is the :git/url people will use.

A minimal example, using the default bare bones template:

$ clojure -Tclj-new create :template template :name myname/mytemplate
Generating a project called mytemplate that is a 'clj-new' template

You will now have a folder called mytemplate that is a very minimal template.

To create a new project based on that template, you need to have it on the classpath (just as if it were a library) and you also need clj-new on the classpath since you are using it to generate a project from that template:

$ clojure -Sdeps '{:deps {myname/mytemplate {:local/root "mytemplate"}}}' -Tclj-new create :template mytemplate :name myname/myproject
Generating fresh 'clj new' mytemplate project.
$ tree myproject
myproject
|____deps.edn
|____src
| |____myname
| | |____myproject
| | | |____foo.clj

This example uses a local template project structure, which is probably a good idea when you are developing your template, because the only real way to test a template is by trying to use it to generate a new project.

Once you have it working, you can publish it to GitHub or Clojars just like a regular library.

Arguments

Previous sections have revealed that it is possible to pass arguments to templates. For example:

    clojure -Tclj-new create :template custom-template :name project-name \
      :args '[arg1 arg2 arg3]'

These arguments are accessible in the custom-template function as a second argument.

(ns clj.new.custom-template ,,,)

(defn custom-template
  [name & args]
  (println name " has the following arguments: " args))

Nearly all templates will expect these to be strings but you can use symbols and clj-new will coerce them to strings for you:

    clojure -Tclj-new create :template custom-template :name project-name \
      :args '["arg1" "arg2" "arg3"]'
    # can usually be written as:
    clojure -Tclj-new create :template custom-template :name project-name \
      :args '[arg1 arg2 arg3]'
    # unless the arguments cannot be represented as Clojure symbols

Note: conversion of :args (and :output) from symbols to strings was added in clj-new 1.1.297.

Using `clj-new` Programmatically

Since you can depend on clj-new as a library, you can invoke clj-new/create programmatically, such as in a build/test pipeline. By default, clj-new/create calls shutdown-agents when it completes, which is reasonable for a "tool" but is not conducive to programmatic use. An otherwise undocumented dynamic Var exists which lets you override this behavior:

  (require 'clj-new)

  (binding [clj-new.helpers/*shutdown* nil]
    (clj-new/create {:template "app" :name 'example/four}))

This will suppress the call to shutdown-agents.

Note: the clj-new.helpers namespace is undocumented and contains implementation details that are subject to change. Only this *shutdown* Var and behavior should be relied on.

clj Generators

Whereas clj templates will generate an entire new project in a new directory, clj generators are intended to add / modify code in an existing project.

You can either say clojure -Tclj-new generate ... or add an alias for it:

    ;; add this inside your :aliases map:
    :generate {:extra-deps {com.github.seancorfield/clj-new
                            {:mvn/version "1.3.415"}}
               :exec-fn clj-new/generate}}

Given the alias above, you can say clojure -X:generate to run one or more generators, based on a :generate vector argument that you provide. Each generator in the vector is a string -- either "type" or "type=name". The type specifies the type of generator to use. The name is the main argument that is passed to the generator.

A clj generator can be part of a project or a template. A generator foo, has a clj.generate.foo/generate function that accepts at least two arguments, prefix and the name specified as the main argument. prefix specifies the directory in which to perform the code generation and defaults to src (it cannot currently be overridden). In addition, any additional arguments are passed as additional arguments to the generator.

There are currently a few built-in generators:

file
ns
def
defn
edn

The file generator creates files relative to the prefix. It optionally accepts a body, and file extension, supplied via an :args vector of strings. Those default to nil and "clj" respectively.

# Inside project folder, relying on the clj-new dependency.
clojure -Tclj-new generate :generate '["file=foo.bar"]' :args '["(ns foo.bar)" "clj"]'

The ns generator creates a clojure namespace by using the file generator and providing a few defaults.

clojure -Tclj-new generate :generate '["ns=foo.bar"]'

This will generate src/foo/bar.clj containing (ns foo.bar) (and a placeholder docstring). It will not replace an existing file.

clojure -Tclj-new generate :generate '["defn=foo.bar/my-func"]'

If src/foo/bar.clj does not exist, it will be generated as a namespace first (using the ns generator above), then a definition for my-func will be appended to that file (with a placeholder docstring and a dummy argument vector of [args]). The generator does not check whether that defn already exists so it always appends a new defn.

Both the def and defn generators create files using the ns generator above.

The edn generator uses the file generator internally, with a default extension of "edn".

clojure -Tclj-new generate :generate '["edn=foo.bar"]' :args '["(ns foo.bar)"]'

You can provide as many generators as you want in the :generate vector, but if you provide an :args vector then those arguments will be passed into each of the generator functions, so you may still need to run multiple clojure -Tclj-new generate commands.

The exec-args available for the generate function are:

:generate -- a (non-empty) vector of generator strings to use
:args -- an optional vector of string to pass to the generator itself as command-line arguments
:edn-args -- an optional EDN expression to pass to the generator itself as the arguments for the generator; takes precedence over :args; nearly all generators expect a sequence of strings so :args is going to be the easiest way to pass arguments
:force -- if true, will force overwrite the target directory/file if it exists
:help -- if true, will provide a summary of these options as help
:prefix -- specify the project directory in which to run the generator (the default is src but :prefix '"."' will allow a generator to modify files in the root of your project)
:snapshot -- if true, look for -SNAPSHOT version of the template (not just a release version)
:template -- load this template (using the same rules as for clj-new/create above) and then run the specified generator
:version -- use this specific version of the template

Emacs Integration

An emacs package is available which provides a Magit-style interface to clj-new and deps-new. It includes some community templates and welcomes for recommendations for more.

Releases

This project follows the version scheme MAJOR.MINOR.COMMITS where MAJOR and MINOR provide some relative indication of the size of the change, but do not follow semantic versioning. In general, all changes endeavor to be non-breaking (by moving to new names rather than by breaking existing names). COMMITS is an ever-increasing counter of commits since the beginning of this repository.

Latest stable release: 1.3.415

Roadmap

Improve the built-in template template so that it can be used to seed a new clj project.

License

Distributed under the Eclipse Public License version 1.0.

Name		Name	Last commit message	Last commit date
Latest commit History 415 Commits
.github		.github
src		src
.gitignore		.gitignore
.gitpod.dockerfile		.gitpod.dockerfile
.gitpod.yml		.gitpod.yml
CHANGELOG.md		CHANGELOG.md
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
LICENSE		LICENSE
README.md		README.md
build.clj		build.clj
deps.edn		deps.edn

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

clj-new

Getting Started

Installation as a Tool

Installation via `deps.edn`

Babashka CLI

Options for `clj-new/create`

Project Names

Templates

Third-party templates

The `app` Template

The `lib` Template

The `polylith` Template

The `template` Template

The Generated `pom.xml` File

The Generated `LICENSE` File

General Template Usage

Example Usage

`clj` Templates

Arguments

Using `clj-new` Programmatically

clj Generators

Emacs Integration

Releases

Roadmap

License

About

Releases 39

Sponsor this project

Packages

Languages

License

seancorfield/clj-new

Folders and files

Latest commit

History

Repository files navigation

clj-new

Getting Started

Installation as a Tool

Installation via deps.edn

Babashka CLI

Options for clj-new/create

Project Names

Templates

Third-party templates

The app Template

The lib Template

The polylith Template

The template Template

The Generated pom.xml File

The Generated LICENSE File

General Template Usage

Example Usage

clj Templates

Arguments

Using clj-new Programmatically

clj Generators

Emacs Integration

Releases

Roadmap

License

About

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases 39

Sponsor this project

Packages 0

Languages

Installation via `deps.edn`

Options for `clj-new/create`

The `app` Template

The `lib` Template

The `polylith` Template

The `template` Template

The Generated `pom.xml` File

The Generated `LICENSE` File

`clj` Templates

Using `clj-new` Programmatically

Packages