weact docs patch re "security vulnerability" (qmk#19572)

sboysel · Jan 17, 2023 · b695a7f · b695a7f
1 parent f623910
commit b695a7f
Show file tree

Hide file tree

Showing 5 changed files with 5 additions and 5 deletions.
diff --git a/docs/platformdev_blackpill_f4x1.md b/docs/platformdev_blackpill_f4x1.md
@@ -4,7 +4,7 @@ This document applies to the F401- and F411-based Blackpills.
 
 The WeAct Blackpill is a popular choice for handwired boards, as it offers a powerful micro controller, USB Type C, a good number of pins to use, and a large amount of firmware space.  All for a ~$6 USD price tag. 
 
-* [WeAct GitHub for F4x1 Blackpill](https://github.com/WeActTC/MiniSTM32F4x1)
+* [WeAct GitHub for F4x1 Blackpill](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1)
   * Unfortunately, due to supply issues official WeAct F411 based blackpills may not be available.
 
 ![Blackpill F411](https://i.imgur.com/nCgeolTh.png)

diff --git a/keyboards/handwired/dactyl_manuform/6x6/readme.md b/keyboards/handwired/dactyl_manuform/6x6/readme.md
@@ -17,7 +17,7 @@ Basic guide how to build 6x6 board is in root keyboard dir. This will help you t
 
 If you want to use 5thumb cluster or stm32, you also should read base guide, but please came back here after you finish 😉.
 
-For my build I used stm32f411 black pill. It's pretty cheap board and I highly recommend you to buy one from official distributors, to support board creators. [To buy it, please go into designer site](https://github.com/WeActTC/MiniSTM32F4x1).
+For my build I used stm32f411 black pill. It's pretty cheap board and I highly recommend you to buy one from official distributors, to support board creators. [To buy it, please go into designer site](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1).
 
 I recommend using stm32 boards for this project, because QMK recently added support for [tinyuf2 bootloader](https://github.com/adafruit/tinyuf2). This bootloader is great for cases where you are going to use QMK Configurator and don't want to use any command line interface. This way when you need change keyboard layout, you only need an UF2 file. Setting up board in boot mode will allow you to drag and drop it on to created STM32F flash drive.
 ![BlackPill Schematic](blackpill_f411/STM32F4x1_PinoutDiagram_RichardBalint.png "Schematic of stm32f4 blackpill")

diff --git a/keyboards/handwired/dygma/raise/readme.md b/keyboards/handwired/dygma/raise/readme.md
@@ -3,7 +3,7 @@
 ![](https://cdn.shopify.com/s/files/1/0374/9448/9228/files/Dygma-Raise-Hero2.png)
 
 * Keyboard Maintainer: [ibash](https://github.com/ibash)
-* Hardware Supported: [F411 Blackpill](https://github.com/WeActTC/MiniSTM32F4x1) with the [Dygma Raise](http://www.dygma.com)
+* Hardware Supported: [F411 Blackpill](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1) with the [Dygma Raise](http://www.dygma.com)
 * Hardware Availability: See below
 
 

diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md
@@ -11,7 +11,7 @@
 * SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1
 
 * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
-* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
+* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
 
 Make example for this keyboard (after setting up your build environment):
 

diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
@@ -19,7 +19,7 @@
 ## Keyboard Info
 
 * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
-* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
+* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
 
 Make example for this keyboard (after setting up your build environment):