Rollup of 14 pull requests #77206
Closed
Rollup of 14 pull requests #77206
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…stead of whole format string
…ack message when RUST_BACKTRACE=0
0.4.2 -> 0.4.3
This patch also: * Add soft-float supports: only f32 * zero-extend i8/i16 to i32 because MIPS only supports register-length arithmetic. * Update table in asm! chapter in unstable book.
- Suggest `x.py setup` if config.toml doesn't exist yet (twice, once before and once after the build) - Prompt for a profile if not given on the command line - Print the configuration file that will be used - Print helpful starting commands after setup - Link to the dev-guide after finishing - Note that distro maintainers will see the changelog warning
The (internal) std::io::lazy::Lazy was used to lazily initialize the stdout and stdin buffers (and mutexes). It uses atexit() to register a destructor to flush the streams on exit, and mark the streams as 'closed'. Using the stream afterwards would result in a panic. Stdout uses a LineWriter which contains a BufWriter that will flush the buffer on drop. This one is important to be executed during shutdown, to make sure no buffered output is lost. It also forbids access to stdout afterwards, since the buffer is already flushed and gone. Stdin uses a BufReader, which does not implement Drop. It simply forgets any previously read data that was not read from the buffer yet. This means that in the case of stdin, the atexit() function's only effect is making stdin inaccessible to the program, such that later accesses result in a panic. This is uncessary, as it'd have been safe to access stdin during shutdown of the program. --- This change removes the entire io::lazy module in favour of SyncOnceCell. SyncOnceCell's fast path is much faster (a single atomic operation) than locking a sys_common::Mutex on every access like Lazy did. However, SyncOnceCell does not use atexit() to drop the contained object during shutdown. As noted above, this is not a problem for stdin. It simply means stdin is now usable during shutdown. The atexit() call for stdout is moved to the stdio module. Unlike the now-removed Lazy struct, SyncOnceCell does not have a 'gone and unusable' state that panics. Instead of adding this again, this simply replaces the buffer with one with zero capacity. This effectively flushes the old buffer *and* makes any writes afterwards pass through directly without touching a buffer, making print!() available during shutdown without panicking.
The main use case of TrustedLen is allowing APIs to specialize on it, but no use of it uses that specialization. Instead, only the .len() function provided by ExactSizeIterator is used, which is already required to be accurate. Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
The syscalls returning a new file descriptors generally use
lowest-numbered file descriptor not currently opened, without any
exceptions for those corresponding to the standard streams.
Previously when any of standard streams has been closed before starting
the application, operations on std::io::{stderr,stdin,stdout} objects
were likely to operate on other logically unrelated file resources
opened afterwards.
Avoid the issue by reopening the standard streams when they are closed.
This refactors handling of `Rvalue::{Unary,Binary}Op` in the
const-checker. Now we `span_bug` if there's an unexpected type in a
primitive operation. This also allows unary negation on
`char` values through the const-checker because it makes the code a bit
cleaner. `char` does not actually support these operations, and if it
did, we could evaluate them at compile-time.
Reopen standard file descriptors when they are missing on Unix
The syscalls returning a new file descriptors generally return lowest-numbered
file descriptor not currently opened, without any exceptions for those
corresponding to stdin, sdout, or stderr.
Previously when any of standard file descriptors has been closed before starting
the application, operations on std::io::{stderr,stdin,stdout} were likely to
either succeed while being performed on unrelated file descriptor, or fail with
EBADF which is silently ignored.
Avoid the issue by using /dev/null as a replacement when the standard file
descriptors are missing.
The implementation is based on the one found in musl. It was selected among a
few others on the basis of the lowest overhead in the case when all descriptors
are already present (measured on GNU/Linux).
Closes #57728.
Closes #46981.
Closes #60447.
Benefits:
* Makes applications robust in the absence of standard file descriptors.
* Upholds IntoRawFd / FromRawFd safety contract (which was broken previously).
Drawbacks:
* Additional syscall during startup.
* The standard descriptors might have been closed intentionally.
* Requires /dev/null.
Alternatives:
* Check if stdin, stdout, stderr are opened and provide no-op substitutes in std::io::{stdin,stdout,stderr} without reopening them directly.
* Leave the status quo, expect robust applications to reopen them manually.
Point at named argument not found when using `format_args_capture` instead of whole format string
Add `x.py setup` Closes #76503. - Suggest `x.py setup` if config.toml doesn't exist yet - Prompt for a profile if not given on the command line - Print the configuration that will be used - Print helpful starting commands after setup - Link to the dev-guide after finishing
Add asm! support for MIPS For now, I only add support for mips32. mips64 may come in future PRs if I could learn more about the target.
Add accessors to Command. This adds some accessor methods to `Command` to provide a way to access the values set when building the `Command`. An example where this can be useful is to display the command to be executed. This is roughly based on the [`ProcessBuilder`](https://github.com/rust-lang/cargo/blob/13b73cdaf76b2d9182515c9cf26a8f68342d08ef/src/cargo/util/process_builder.rs#L105-L134) in Cargo. Possible concerns about the API: - Values with NULs on Unix will be returned as `"<string-with-nul>"`. I don't think it is practical to avoid this, since otherwise a whole separate copy of all the values would need to be kept in `Command`. - Does not handle `arg0` on Unix. This can be awkward to support in `get_args` and is rarely used. I figure if someone really wants it, it can be added to `CommandExt` as a separate method. - Does not offer a way to detect `env_clear`. I'm uncertain if it would be useful for anyone. - Does not offer a way to get an environment variable by name (`get_env`). I figure this can be added later if anyone really wants it. I think the motivation for this is weak, though. Also, the API could be a little awkward (return a `Option<Option<&OsStr>>`?). - `get_envs` could skip "cleared" entries and just return `&OsStr` values instead of `Option<&OsStr>`. I'm on the fence here. My use case is to display a shell command, and I only intend it to be roughly equivalent to the actual execution, and I probably won't display `None` entries. I erred on the side of providing extra information, but I suspect many situations will just filter out the `None`s. - Could implement more iterator stuff (like `DoubleEndedIterator`). I have not implemented new std items before, so I'm uncertain if the existing issue should be reused, or if a new tracking issue is needed. cc #44434
Enable const propagation into operands at mir_opt_level=2 Feature was added in #74507 but gated with `mir_opt_level>=3` because of compile time regressions. Let's see whether the LLVM 11 update solves that. As the [perf results](#77107 (comment)) show, enabling this optimization results in a lot less regression as before. cc @oli-obk r? @ghost
…ng,oli-obk Add `#![feature(const_fn_floating_point_arithmetic)]` cc #76618 This is a template for splitting up `const_fn` into granular feature gates. I think this will make it easier, both for us and for users, to track stabilization of each individual feature. We don't *have* to do this, however. We could also keep stabilizing things out from under `const_fn`. cc @rust-lang/wg-const-eval r? @oli-obk
Update mdBook 0.4.2 -> 0.4.3 Also updated version requirement in `Cargo.toml` from 0.4.0 to 0.4.3.
Update cargo 7 commits in 8777a6b1e8834899f51b7e09cc9b8d85b2417110..05c611ae3c4255b7a2bcf4fcfa65b20286a07839 2020-09-15 19:11:03 +0000 to 2020-09-23 23:10:38 +0000 - --workspace flag for locate-project to find the workspace root (rust-lang/cargo#8712) - Remove some badges documentation. (rust-lang/cargo#8727) - Add plain message format for locate-project (rust-lang/cargo#8707) - Add a term option to configure the progress bar (rust-lang/cargo#8165) - Replace d_as_f64 with as_secs_f64 (rust-lang/cargo#8721) - Add cross check to filters_target test. (rust-lang/cargo#8713) - Add test for whitespace behavior in env flags. (rust-lang/cargo#8706)
Remove std::io::lazy::Lazy in favour of SyncOnceCell The (internal) std::io::lazy::Lazy was used to lazily initialize the stdout and stdin buffers (and mutexes). It uses atexit() to register a destructor to flush the streams on exit, and mark the streams as 'closed'. Using the stream afterwards would result in a panic. Stdout uses a LineWriter which contains a BufWriter that will flush the buffer on drop. This one is important to be executed during shutdown, to make sure no buffered output is lost. It also forbids access to stdout afterwards, since the buffer is already flushed and gone. Stdin uses a BufReader, which does not implement Drop. It simply forgets any previously read data that was not read from the buffer yet. This means that in the case of stdin, the atexit() function's only effect is making stdin inaccessible to the program, such that later accesses result in a panic. This is uncessary, as it'd have been safe to access stdin during shutdown of the program. --- This change removes the entire io::lazy module in favour of SyncOnceCell. SyncOnceCell's fast path is much faster (a single atomic operation) than locking a sys_common::Mutex on every access like Lazy did. However, SyncOnceCell does not use atexit() to drop the contained object during shutdown. As noted above, this is not a problem for stdin. It simply means stdin is now usable during shutdown. The atexit() call for stdout is moved to the stdio module. Unlike the now-removed Lazy struct, SyncOnceCell does not have a 'gone and unusable' state that panics. Instead of adding this again, this simply replaces the buffer with one with zero capacity. This effectively flushes the old buffer *and* makes any writes afterwards pass through directly without touching a buffer, making print!() available during shutdown without panicking. --- In addition, because the contents of the SyncOnceCell are no longer dropped, we can now use `&'static` instead of `Arc` in `Stdout` and `Stdin`. This also saves two levels of indirection in `stdin()` and `stdout()`, since Lazy effectively stored a `Box<Arc<T>>`, and SyncOnceCell stores the `T` directly.
Remove TrustedLen requirement from BuilderMethods::switch The main use case of TrustedLen is allowing APIs to specialize on it, but no use of it uses that specialization. Instead, only the .len() function provided by ExactSizeIterator is used, which is already required to be accurate. Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
update Miri Fixes #77130
Remove stray word from `ClosureKind::extends` docs
|
📌 Commit 3680c17 has been approved by |
bors
added
the
S-waiting-on-bors
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Successful merges:
format_args_captureinstead of whole format string #76485 (Point at named argument not found when usingformat_args_captureinstead of whole format string)x.py setup#76631 (Addx.py setup)#![feature(const_fn_floating_point_arithmetic)]#77122 (Add#![feature(const_fn_floating_point_arithmetic)])ClosureKind::extendsdocs #77204 (Remove stray word fromClosureKind::extendsdocs)Failed merges:
#[rustc_allow_const_fn_ptr]and add#![feature(const_fn_fn_ptr_basics)]#77170 (Remove#[rustc_allow_const_fn_ptr]and add#![feature(const_fn_fn_ptr_basics)])r? @ghost