Bill of Materials (BOM)
| Component | Image | Quantity | Code/Part ID | Suggested Supplier | Link | Description |
|---|---|---|---|---|---|---|
| Raspberry Pi Pico |  |
1 | N/A | The Pi Hut | Raspberry Pi Pico | The 'brain' of the module |
| 2.54mm (0.1") Male Header (20 pin) |  |
2 | N/A | The Pi Hut | 2.54mm Male Headers | The headers that allow the Pico to be removed |
| 2.54mm (0.1") Female Header (20 pin) |  |
2 | N/A | The Pi Hut | 2.54mm Female Headers | The female headers the Pico slots into |
| 2.54mm (0.1") Male Header (8 pin) | |
5 | N/A | The Pi Hut | 2.54mm Male Headers | The headers that are cut to form the power connector, pass-through header, and support connector |
| 2.54mm (0.1") Female Header (8 pin) | |
5 | N/A | The Pi Hut | 2.54mm Female Headers | The female headers that the boards slot into to hold together |
| 2 mm (JST PH) Male Header (16 pin) |  |
1 | N/A | The Pi Hut | 2mm Male Headers | The headers that are cut to form I2C expansion headers on the back of the module |
| 3.5mm Mono Jack (Female) |  |
8 | PJ398SM / PJ301M-12 | Thonk | Thonkiconn 3.5mm Jack Sockets | Digital and analogue output jacks |
| 9mm 50K Potentiometer T18 Shaft |  |
2 | B50K T18 | Thonk | Alpha 9mm Pots | Two control knobs |
| C&K Tactile Switch |  |
2 | D6R00 F1 LFS | Thonk | C&K Tactile Switch | Two control buttons |
| Flat top LEDs |  |
4 | L-424SRDT | Thonk | Flat Top LEDs | Digital jack indicator LEDs |
| 16 pin to 16 pin EuroRack Power Cable |  |
1 | N/A | Thonk | EuroRack Power Cables | The cable that allows the module to be powered by your EuroRack power supply |