Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Target develop branch instead of master (#10)
* Start `develop` for 2022q1. * Added cancel_key_lock function (qmk#15321) * [Core] Remove matrix_is_modified() and debounce_is_active() (qmk#15349) * [Keyboard] Added Wakizashi 40 (qmk#15336) Co-authored-by: Ryan <[email protected]> * Change default USB Polling rate to 1kHz (qmk#15352) * [Keyboard] Convert ergoinu to SPLIT_KEYBOARD (qmk#15305) * Implement MAGIC_TOGGLE_CONTROL_CAPSLOCK (qmk#15368) * Convert not_so_minidox to SPLIT_KEYBOARD (qmk#15306) * Convert ai03/orbit to SPLIT_KEYBOARD (qmk#15340) * Tidy up existing i2c_master implementations (qmk#15376) * Move chibios defines out of header * Make some avr defines internal * Generalize Unicode defines (qmk#15409) * Add missing define for unicode common (qmk#15416) * Remove Deprecated USB Polling comment from vusb.c (qmk#15420) * Expand rotational range for PMW3360 Optical Sensor (qmk#15431) * Add support for 21.11.x, remove 21.6.x as ChibiOS "canceled" it. (qmk#15435) * added missing audio_off_user() callback (qmk#15457) Co-authored-by: Raoul Rubien <[email protected]> * [Core] Don't send keyboard reports that propagate no changes to the host (qmk#14065) * Migrate serial_uart usages to UART driver (qmk#15479) * Migrate Thermal Printer feature to UART driver * Migrate 40percentclub UT47 to UART driver * Migrate Centromere to UART driver * Migrate Chimera Ergo to UART driver * Migrate Chimera Let's Split to UART driver * Migrate Chimera Ortho to UART driver * Migrate Chimera Ortho Plus to UART driver * Migrate Comet46 to UART driver * Migrate Palm USB converter to UART driver * Migrate Sun USB converter to UART driver * Migrate Dichotomy to UART driver * Migrate Honeycomb to UART driver * Migrate Mitosis to UART driver * Migrate Redox W to UART driver * Migrate Uni660 to UART driver * Migrate Telophase to UART driver * Fix build failure for UT47 (qmk#15483) * Use the PR title rather than parsing the commit message. (qmk#15537) * Migrate RN42 to UART driver and refactor (qmk#15492) * [CI] Format code according to conventions (qmk#15541) * Documentation Typo fix (qmk#15538) * Fix some typos, especially the sensor name. (qmk#15557) * Add open-drain GPIO support. (qmk#15282) * Add open-drain GPIO support. * `qmk format-c` * Wording. * Remove port GPIO implementations as the only board that uses it has its own internal defs anyway. Will wait for first-class handling of ports in core before reimplementing. * Fixes potential wpm sampling overflow, along with code comment fixes (qmk#15277) Co-authored-by: Trevor Powell <[email protected]> * Add a clarification to an error message (qmk#15207) Makes this a bit more foolproof. See qmk#15202 * [Core] Split support for pointing devices. (qmk#15304) * Draft implementation * formatting * fix combined buttons * remove pimoroni throttle * sync pointing on a throttle loop with checksum * no longer used * doh Co-authored-by: Drashna Jaelre <[email protected]> * switch pimoroni to a cpi equivalent * add cpi support * allow user modification of seperate mouse reports * a little tidy up * add *_RIGHT defines. * docs * doxygen comments * basic changelog * clean up pimoroni * small doc fixes * Update docs/feature_pointing_device.md Co-authored-by: Drashna Jaelre <[email protected]> * performance tweak if side has usb * Don't run init funtions on wrong side * renamed some variables for consistency * fix pimoroni typos * Clamp instead of OR * Promote combined values to uint16_t * Update pointing_device.c Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Nick Brassel <[email protected]> * Format code according to conventions (qmk#15588) * Make (un)register code functions weak (qmk#15285) * Defer pin operations to gpio.h (qmk#15589) * Add sym_defer_pr debouncer type (qmk#14948) * Durgod: Increase scan rate by using wait_us GPT timer (qmk#14091) Lower the tick rate from 10kHz to 1kHz (otherwise all the extra interrupts reduce the achievable scan rate). Enable the WAIT_US_TIMER using GPT TIM3. Observed scan rate on the K320 is increased from 625Hz to 2090-2120Hz. * Format code according to conventions (qmk#15590) * Fixup line endings * More GPIO compilation fixes. (qmk#15592) * Custom matrix lite support for split keyboards (qmk#14674) * Custom matrix lite support for split keyboards * WIP: matrix -> matrix_common refactor * Move matrix_post_scan() to matrix_common.c * Refactor `bootloader_jump()` implementations (qmk#15450) * Refactor `bootloader_jump()` implementations * Fix tests? * Rename `atmel-samba` to `md-boot` * [Keymap] Add vitoni keymap for GMMK Pro (ISO) (qmk#15006) * [Keymap] Add vitoni layout for GMMK Pro (ISO) Keymap has layered cursor keys similar to laptop keyboards. * Configure RGB defaults for startup * Configure encoder to change value/brightness on FN layer * Remove FN layer and add dedicated RGB layer * Make RGB layer sticky (using TG) to avoid holding FN while configuring RGB * Add RGB indicators for active layers * Add RGB indicator for active RESET mode Signed-off-by: Victor Toni <[email protected]> * Configure idle / USB suspend settings * Add RGB fade in when resuming after suspend * Add RGB fade out before suspend * Add fade out before idle * Add breathe effect when idle * Convert some more boards to Matrix Lite (qmk#15489) * Fix for SPI write timing in PMW3360 driver (qmk#15519) Timing does not match Pixart documentation for this sensor (may have been carried forward from adns9800). Not aware of any issues coming from this currently. It should only cause issues when writing to multiple registers in succession which currently only happens during initialization for the PMW3360. This should prevent future issues with write operations if other features of the sensor are added. * Format code according to conventions (qmk#15593) * pwm3360 driver cleanup and diff reduction to adns9800 (qmk#15559) * Diff reduction between ADNS9800 and PMW3360 drivers. They are very similar devices. This (somewhat) unreadable diff is essentially a no-op, but it makes a `vimdiff` between the 2 drivers much more readable. * Cleanup pwm3360 driver some more. Remove redundant calls to spi_start() and spi_stop(), as pmw3360_write() will already call these. * [Core] Fix bug and code regression for Split Common (qmk#15603) * Format code according to conventions (qmk#15604) * [Bug] Include missing string.h include (qmk#15606) * move bm65hsrgb_iso and bm68hsrgb to rev1/ (qmk#15132) * Move to organization folder (qmk#15481) * move directory * fix * move wings42 to dailycraft * Adjust wings42 to work with organization folder. * [Keyboard] Update Tractyl Manuform to use Split Pointing Device Sync * [Keyboard] Update grs_70ec to use newer custom matrix (qmk#15609) * [Keyboard] Fix compiler issue with tractyl manuform 4x6 (qmk#15646) * Fix split pointing for analog joystick (qmk#15691) Co-authored-by: Nick Brassel <[email protected]> * Format code according to conventions (qmk#15693) * Update pmw3360 comments to match the datasheet better, fix delays. (qmk#15682) * move @yangdigi 's keyboards to a YDKB folder (qmk#15681) * Format code according to conventions (qmk#15705) Co-authored-by: Nick Brassel <[email protected]> Co-authored-by: QMK Bot <[email protected]> Co-authored-by: wheredoesyourmindgo <[email protected]> Co-authored-by: Stefan Kerkmann <[email protected]> Co-authored-by: xiao <[email protected]> Co-authored-by: Ryan <[email protected]> Co-authored-by: Drashna Jaelre <[email protected]> Co-authored-by: Joel Challis <[email protected]> Co-authored-by: Dipl.-Ing. Raoul Rubien, BSc <[email protected]> Co-authored-by: Raoul Rubien <[email protected]> Co-authored-by: SmollChungus <[email protected]> Co-authored-by: uqs <[email protected]> Co-authored-by: vectorstorm <[email protected]> Co-authored-by: Trevor Powell <[email protected]> Co-authored-by: Hugo Osvaldo Barrera <[email protected]> Co-authored-by: Dasky <[email protected]> Co-authored-by: Chad Austin <[email protected]> Co-authored-by: Simon Arlott <[email protected]> Co-authored-by: Jay Greco <[email protected]> Co-authored-by: Victor Toni <[email protected]> Co-authored-by: Alabastard-64 <[email protected]> Co-authored-by: peepeetee <[email protected]> Co-authored-by: yfuku <[email protected]>
- Loading branch information