prepared to control led light with marlin

rmpel · Feb 18, 2021 · a9bdea3 · a9bdea3
1 parent 0f13198
commit a9bdea3
Showing 1 changed file with 4 additions and 3 deletions.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -513,13 +513,14 @@
  */
 #define CASE_LIGHT_ENABLE
 #if ENABLED(CASE_LIGHT_ENABLE)
+  #undef FAN1_PIN
   #define CASE_LIGHT_PIN P2_04                  // Override the default pin if needed
   #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
-  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
+  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 250   // Set default power-up brightness (0-255, requires PWM pin)
   //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
   //#define CASE_LIGHT_MAX_PWM 128            // Limit PWM duty cycle (0-255)
-  //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
+  #define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
   #if ENABLED(NEOPIXEL_LED)
     //#define CASE_LIGHT_USE_NEOPIXEL         // Use NeoPixel LED as case light
   #endif
@@ -2189,7 +2190,7 @@
                                                   // 0 to disable start loading and skip to fast load only
   #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     1  // (mm) Load length of filament, from extruder gear to nozzle.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
   //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.