Home

Welcome to the MikroDev wiki!

Thank you for visiting the project. To get started if you already have the unlock key, use Freematics Arduino Builder to flash your Wemos D1/Node Mcu or ESP01, please refer to the following steps to get you started. Perks of having the unlock key is given on the readme file, still you can use the firmware without the unlock key but is limited to standard mikrotik api commands only.

Getting Started

For Nodemcu/WemosD1/ESP12-E&F use this NODEMCU_SHIELD_V0.5.3.1.ino.bin

• Step 1: Load code / Binary and select the binary

• Step 2: Select Target as Nodemcu(ESP8266) for Nodemcu/WemosD1/ESP12-E&F

• Step 3: Click on the serial port of your esp in your case might be COM1 or COM2 ... etc.

• Step 4: Unlocking the sweet features.

---

For ESP-01 use this ESP01_SHIELD_V0.5.3.1.ino.bin

• Step 1: Load code / Binary and select the binary

• Step 2: Select Target as ESP8266(1MB) for ESP-01

• Step 3: Click on the serial port of your esp in your case might be COM1 or COM2 ... etc.

• Step 4: Unlocking the sweet features, type in license + Key and press enter.