Merge pull request #1341 from rvykydal/remove-test-name-comment

Remove #test name comment from ks.in files
rhinstaller · Nov 28, 2024 · 109a503 · 109a503
2 parents fdeadf4 + b7d7310
commit 109a503
Show file tree

Hide file tree

Showing 290 changed files with 0 additions and 290 deletions.
diff --git a/anabot-1.ks.in b/anabot-1.ks.in
@@ -1,4 +1,3 @@
 #version=DEVEL
-#test name: anabot-1
 
 # NOTHING TO DO HERE! THIS FILE IS NOT USED!
diff --git a/anaconda-conf.ks.in b/anaconda-conf.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: anaconda-conf
 
 # Verify that the Anaconda configuration can be changed.
 

diff --git a/anaconda-modules.ks.in b/anaconda-modules.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: anaconda-modules
 
 # Verify that only the enabled Anaconda DBus modules are started.
 

diff --git a/authconfig.ks.in b/authconfig.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: authconfig
 %ksappend repos/default.ks
 
 %ksappend common/common_no_payload.ks

diff --git a/authselect-not-set.ks.in b/authselect-not-set.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: authselect-not-set
 #Test that authselect default configuration if authselect is not set in kickstart
 %ksappend repos/default.ks
 

diff --git a/authselect.ks.in b/authselect.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: authselect
 %ksappend repos/default.ks
 
 %ksappend common/common_no_payload.ks

diff --git a/autopart-encrypted-1.ks.in b/autopart-encrypted-1.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-encrypted-1
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-encrypted-2.ks.in b/autopart-encrypted-2.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-encrypted-2
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-encrypted-3.ks.in b/autopart-encrypted-3.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-encrypted-3
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-fstype.ks.in b/autopart-fstype.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-fstype
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/autopart-hibernation.ks.in b/autopart-hibernation.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-hibernation
 %ksappend repos/default.ks
 
 zerombr

diff --git a/autopart-luks-1.ks.in b/autopart-luks-1.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-luks-1
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-luks-2.ks.in b/autopart-luks-2.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-luks-2
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-luks-3.ks.in b/autopart-luks-3.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-luks-3
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-luks-4.ks.in b/autopart-luks-4.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-luks-4
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-luks-5.ks.in b/autopart-luks-5.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-luks-5
 
 %ksappend repos/default.ks
 network --bootproto=dhcp

diff --git a/autopart-nohome.ks.in b/autopart-nohome.ks.in
@@ -1,4 +1,3 @@
-#test name: autopart-nohome
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/basic-ftp.ks.in b/basic-ftp.ks.in
@@ -1,4 +1,3 @@
-#test name: basic-ftp
 url --url=@KSTEST_FTP_URL@
 network --bootproto=dhcp
 

diff --git a/basic-ostree.ks.in b/basic-ostree.ks.in
@@ -1,4 +1,3 @@
-#test name: basic-ostree
 # Substitute something in for REPO or this will all come crashing down.
 ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=@KSTEST_OSTREE_REPO@ --ref=fedora-atomic/rawhide/x86_64/base/core
 network --bootproto=dhcp

diff --git a/bindtomac-bond-vlan-httpks.ks.in b/bindtomac-bond-vlan-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-bond-vlan
 %ksappend repos/default.ks
 
 network --device bond0 --bootproto static --ip @KSTEST_STATIC_IP@ --netmask @KSTEST_STATIC_NETMASK@ --gateway @KSTEST_STATIC_GATEWAY@ --bondslaves=@KSTEST_NETDEV2@,@KSTEST_NETDEV3@ --bondopts=mode=active-backup,miimon=100,primary=@KSTEST_NETDEV2@ --activate --vlanid=222 --activate --onboot=no --bindto=mac

diff --git a/bindtomac-bond2-httpks.ks.in b/bindtomac-bond2-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-bond2
 %ksappend repos/default.ks
 
 network --device bond0 --bootproto dhcp --bondslaves=@KSTEST_NETDEV2@,@KSTEST_NETDEV3@ --bondopts=mode=active-backup,primary=@KSTEST_NETDEV2@ --activate --onboot=no --bindto=mac

diff --git a/bindtomac-bond2-pre.ks.in b/bindtomac-bond2-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-bond2-pre
 #NOTE: this test is a variant of bond2 test, it is sharing its .sh file (setup of NICs and network boot configuration) so beware of changing it independently of bond2 test
 %ksappend repos/default.ks
 

diff --git a/bindtomac-bridge-2devs-httpks.ks.in b/bindtomac-bridge-2devs-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bindtomac-bridge-2devs
 # One bridge with slave activated in dracut,
 # the other one with slave activated only with the bridge
 %ksappend repos/default.ks

diff --git a/bindtomac-bridge-2devs-pre.ks.in b/bindtomac-bridge-2devs-pre.ks.in
@@ -1,4 +1,3 @@
-#test name bindtomac-bridge-2devs-pre
 # One bridge with slave activated in dracut,
 # the other one with slave activated only with the bridge
 %ksappend repos/default.ks

diff --git a/bindtomac-bridge-httpks.ks.in b/bindtomac-bridge-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bindtomac-bridge
 %ksappend repos/default.ks
 
 # --onboot=no doesn't make much sense as a use case but we want to test that it works in this test

diff --git a/bindtomac-bridge-no-bootopts-net.ks.in b/bindtomac-bridge-no-bootopts-net.ks.in
@@ -1,4 +1,3 @@
-#test name bindtomac-bridge-no-bootopts-net
 # Test activating bridge from kickstart in dracut (requires no active network
 # when parsing kickstart, ie ks=hd: or ks=file:)
 # https://bugzilla.redhat.com/show_bug.cgi?id=1373360

diff --git a/bindtomac-bridged-bond-httpks.ks.in b/bindtomac-bridged-bond-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bindtomac-bridged-bond
 %ksappend repos/default.ks
 
 network --device=@KSTEST_NETDEV1@ --bootproto=dhcp --onboot=yes --activate

diff --git a/bindtomac-ifname-httpks.ks.in b/bindtomac-ifname-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-ifname-httpks
 %ksappend repos/default.ks
 
 network --bootproto=dhcp --device=ifname0 --ipv6=2001:cafe:cafe::2/64 --bindto=mac

diff --git a/bindtomac-network-device-default-httpks.ks.in b/bindtomac-network-device-default-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-device-default
 #NOTE: as this test is a "-httpks" the kickstart should be really applied
 #      in initrafs (config files created by parse-kickstart). The parse-kickstart
 #      code actually ignores the command without --device specified

diff --git a/bindtomac-network-device-mac-httpks.ks.in b/bindtomac-network-device-mac-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-device-mac
 %ksappend repos/default.ks
 
 network --bootproto=dhcp --device=52:54:00:12:34:51 --bindto=mac

diff --git a/bindtomac-network-device-mac-pre.ks.in b/bindtomac-network-device-mac-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-device-mac-pre
 %ksappend repos/default.ks
 
 %include /tmp/ksinclude

diff --git a/bindtomac-network-device-mac.ks.in b/bindtomac-network-device-mac.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-device-mac
 %ksappend repos/default.ks
 
 network --bootproto=dhcp --device=52:54:00:12:34:50 --bindto=mac

diff --git a/bindtomac-network-static-2-httpks.ks.in b/bindtomac-network-static-2-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-static-2
 #various combinations of activation in initramfs and stage 2
 %ksappend repos/default.ks
 # activated in initramfs with dhcp, reactivated in stage 2

diff --git a/bindtomac-network-static-to-dhcp-pre-single.ks.in b/bindtomac-network-static-to-dhcp-pre-single.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-network-static-to-dhcp-pre-single
 # rhbz#1432886
 %ksappend repos/default.ks
 %include /tmp/ksinclude

diff --git a/bindtomac-onboot-activate-httpks.ks.in b/bindtomac-onboot-activate-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-onboot-activate-httpks
 %ksappend repos/default.ks
 network --device=@KSTEST_NETDEV2@ --bootproto=dhcp --no-activate --onboot=yes --bindto=mac
 network --device=@KSTEST_NETDEV1@ --bootproto=dhcp --onboot=no --bindto=mac

diff --git a/bindtomac-onboot-bootopts-pre.ks.in b/bindtomac-onboot-bootopts-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-onboot-bootopts-pre
 %ksappend repos/default.ks
 
 %include /tmp/ksinclude

diff --git a/bindtomac-team-httpks.ks.in b/bindtomac-team-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-team
 %ksappend repos/default.ks
 
 network --device team0 --bootproto dhcp --teamslaves="@KSTEST_NETDEV2@'{\"prio\": -10, \"sticky\": true}',@KSTEST_NETDEV3@'{\"prio\": 100}'" --teamconfig="{\"runner\": {\"name\": \"activebackup\"}}" --activate --onboot=no --bindto=mac

diff --git a/bindtomac-team-pre.ks.in b/bindtomac-team-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bindtomac-team-pre
 #NOTE: this test is a variant of team test, it is sharing its .sh file (setup of NICs and network boot configuration) so beware of changing it independently of team test
 %ksappend repos/default.ks
 

diff --git a/bond-ks-initramfs.ks.in b/bond-ks-initramfs.ks.in
@@ -1,4 +1,3 @@
-#test name: bond-ks-intiramfs
 # Test bond configured via kickstart in initramfs
 # Because kickstart is obtained (injected in initramfs) without activating
 # network (which would be done from boot options network configuration),

diff --git a/bond-vlan-httpks.ks.in b/bond-vlan-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bond-vlan
 %ksappend repos/default.ks
 
 network --device bond0 --bootproto static --ip @KSTEST_STATIC_IP@ --netmask @KSTEST_STATIC_NETMASK@ --gateway @KSTEST_STATIC_GATEWAY@ --bondslaves=@KSTEST_NETDEV2@,@KSTEST_NETDEV3@ --bondopts=mode=active-backup,miimon=100,primary=@KSTEST_NETDEV2@ --activate --vlanid=222 --activate --onboot=no

diff --git a/bond-vlan-pre.ks.in b/bond-vlan-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bond-vlan-pre
 #NOTE: this test is a variant of bond-vlan-httpks test, it is sharing its .sh file (setup of NICs and network boot configuration) so beware of changing it independently of bond-vlan-httpks test
 %ksappend repos/default.ks
 

diff --git a/bond2-httpks.ks.in b/bond2-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name: bond2
 %ksappend repos/default.ks
 
 network --device bond0 --bootproto dhcp --bondslaves=@KSTEST_NETDEV2@,@KSTEST_NETDEV3@ --bondopts=mode=active-backup,primary=@KSTEST_NETDEV2@ --activate --onboot=no

diff --git a/bond2-pre.ks.in b/bond2-pre.ks.in
@@ -1,4 +1,3 @@
-#test name: bond2-pre
 #NOTE: this test is a variant of bond2 test, it is sharing its .sh file (setup of NICs and network boot configuration) so beware of changing it independently of bond2 test
 %ksappend repos/default.ks
 

diff --git a/bridge-2devs-httpks.ks.in b/bridge-2devs-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bridge-2devs
 # One bridge with slave activated in dracut,
 # the other one with slave activated only with the bridge
 %ksappend repos/default.ks

diff --git a/bridge-2devs-pre.ks.in b/bridge-2devs-pre.ks.in
@@ -1,4 +1,3 @@
-#test name bridge-2devs-pre
 # One bridge with slave activated in dracut,
 # the other one with slave activated only with the bridge
 %ksappend repos/default.ks

diff --git a/bridge-2devs.ks.in b/bridge-2devs.ks.in
@@ -1,4 +1,3 @@
-#test name bridge-2devs
 # One bridge with slave activated in dracut,
 # the other one with slave activated only with the bridge
 %ksappend repos/default.ks

diff --git a/bridge-httpks.ks.in b/bridge-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bridge
 # This test differs from bridge-2devs in using ip=dhcp (no dev specification)
 %ksappend repos/default.ks
 

diff --git a/bridge-no-bootopts-net.ks.in b/bridge-no-bootopts-net.ks.in
@@ -1,4 +1,3 @@
-#test name bridge-no-bootopts-net
 # Test activating bridge from kickstart in dracut (requires no active network
 # when parsing kickstart, ie ks=hd: or ks=file:)
 # https://bugzilla.redhat.com/show_bug.cgi?id=1373360

diff --git a/bridged-bond-httpks.ks.in b/bridged-bond-httpks.ks.in
@@ -1,4 +1,3 @@
-#test name bridged-bond
 %ksappend repos/default.ks
 
 network --device=@KSTEST_NETDEV1@ --bootproto=dhcp --onboot=yes --activate

diff --git a/btrfs-1.ks.in b/btrfs-1.ks.in
@@ -1,4 +1,3 @@
-#test name: btrfs-1
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/btrfs-2.ks.in b/btrfs-2.ks.in
@@ -1,4 +1,3 @@
-#test name: btrfs-2
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/clearpart-1.ks.in b/clearpart-1.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: ignoredisk
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/clearpart-2.ks.in b/clearpart-2.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: ignoredisk
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/clearpart-3.ks.in b/clearpart-3.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: ignoredisk
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/clearpart-4.ks.in b/clearpart-4.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: ignoredisk
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/container.ks.in b/container.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: container
 #
 # Test that a very minimal installation,
 # generally targetting constainer base images,

diff --git a/default-desktop.ks.in b/default-desktop.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-desktop
 #
 # Test default desktop configuration via the xconfig command.
 %ksappend repos/default.ks

diff --git a/default-fstype.ks.in b/default-fstype.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-fstype
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/default-menu-auto-hide-fedora.ks.in b/default-menu-auto-hide-fedora.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-menu-auto-hide
 %ksappend repos/default.ks
 
 %ksappend common/common_no_payload.ks

diff --git a/default-menu-auto-hide-rhel.ks.in b/default-menu-auto-hide-rhel.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-menu-auto-hide
 %ksappend repos/default.ks
 
 %ksappend common/common_no_payload.ks

diff --git a/default-systemd-target-gui-graphical-provides.ks.in b/default-systemd-target-gui-graphical-provides.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-gui-graphical-login-provides
 #
 # Test graphical.target is set as the default systemd target if:
 # - the installation runs in GUI mode

diff --git a/default-systemd-target-gui.ks.in b/default-systemd-target-gui.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-gui
 #
 # Test multi-user.target should be set by default as the default systemd target
 # when installation runs in GUI mode but not package with service(graphical-login)

diff --git a/default-systemd-target-rdp-graphical-provides.ks.in b/default-systemd-target-rdp-graphical-provides.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-rdp-graphical-provides
 #
 # Test multi-user.target is set as the default systemd target if:
 # - the installation runs in remote desktop mode

diff --git a/default-systemd-target-rdp.ks.in b/default-systemd-target-rdp.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-rdp
 #
 # Test multi-user.target should be set by default as the default systemd target
 # for remote desktop installs. While controlled remotely over RDP the installation itself runs

diff --git a/default-systemd-target-skipx.ks.in b/default-systemd-target-skipx.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-skipx
 #
 # Test default systemd target is correctly set via the skipx command.
 %ksappend repos/default.ks

diff --git a/default-systemd-target-startxonboot.ks.in b/default-systemd-target-startxonboot.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-startxonboot
 #
 # Test default systemd target configuration via the xconfig --startxonboot command.
 %ksappend repos/default.ks

diff --git a/default-systemd-target-tui-graphical-provides.ks.in b/default-systemd-target-tui-graphical-provides.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-tui-graphical-provides
 #
 # Test multi-user.target is set as the default systemd target if:
 # - the installation tuns in text mode

diff --git a/default-systemd-target-tui.ks.in b/default-systemd-target-tui.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-tui
 #
 # Test multi-user.target should be set by default as the default systemd target when:
 # - the installation runs in text mode

diff --git a/default-systemd-target-vnc-graphical-provides.ks.in b/default-systemd-target-vnc-graphical-provides.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-vnc-graphical-provides
 #
 # Test multi-user.target is set as the default systemd target if:
 # - the installation runs in VNC mode

diff --git a/default-systemd-target-vnc.ks.in b/default-systemd-target-vnc.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: default-systemd-target-vnc
 #
 # Test multi-user.target should be set by default as the default systemd target
 # for VNC installs. While controlled remotely over VNC the installation itslef runs

diff --git a/deprecated-rhel9-part1.ks.in b/deprecated-rhel9-part1.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: deprecated-logging-level
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/deprecated-rhel9-part2.ks.in b/deprecated-rhel9-part2.ks.in
@@ -1,5 +1,4 @@
 #version=DEVEL
-#test name: deprecated-timezone-ntpservers
 %ksappend repos/default.ks
 network --bootproto=dhcp
 

diff --git a/disklabel-default.ks.in b/disklabel-default.ks.in
@@ -1,4 +1,3 @@
-#test name: disklabel-default
 
 # Use defaults.
 %ksappend repos/default.ks

diff --git a/disklabel-gpt.ks.in b/disklabel-gpt.ks.in
@@ -1,4 +1,3 @@
-#test name: disklabel-gpt
 
 # Use defaults.
 %ksappend repos/default.ks