Using v3d performance counters causes kernel panic #6389
Comments
|
Random failures in well-tested, core kernel code is often a sign of power/voltage problems. How are you powering this Pi 4? And what else is attached? |
It's powered using one of the recommended CanaKit power supply. Note that for reproduction steps the bare and simple kmscube app results in the same kind of crash. |
|
I've been also monitoring temperature and throttling. Temperature doesn't get higher than 45-47C, and there's no throttling reported. |
|
I could reproduce this (on 6.6 kernel). @jasuarez - I believe you added the v3d perfmon interface. |
|
Interesting... I don't think it is a problem with too many performance counters. In your trace the problem happens when destroying the perfmon, not when creating it. I managed to reproduce the issue both in rpi4 and rpi5 (I need to ensure to export GALLIUM_HUD_VISIBLE and GALLIUM_HUD envvars). The stack trace I get is totally different: In a second retry I got totally different backtrace (too long to paste here). But I suspect we could trying to access an invalid memory address. In both cases we get a "Unable to handle kernel paging request at virtual address". I'm ccing @mairacanal who also works in the kernel, to see if she knows better what's going on here. |
|
I can reproduce the issue even with a few of the counters: I get again the same stack trace I got the first time. Worth to note that before that stack trace there is an Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000, which looks like we are trying to access an invalid address. Also, this time I've tested with an older kernel, 6.6.31, and still get the same issue. |
|
I was able to reproduce the issue in the RPi 4 and RPi 5. After some debugging, I determined that the issue was related to an invalid memory access by V3D. I wrote a patch fixing the issue, which is available in this branch (it is the first patch). This patch solved the kernel crashes I had on both machines (RPi 4 and 5). @w23 @jasuarez @popcornmix Could you also test the patch? I want to check if the crashes are also fixed on your side. |
mairacanal
added a commit
to mairacanal/linux-rpi
that referenced
this issue
Oct 3, 2024
…iptor When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [raspberrypi#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 raspberrypi#1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, explicitly stop the active performance monitor before destroying and freeing all perfmons when the file descriptor is closed. Closes: raspberrypi#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]>
|
Looks good here. Was panicking after typically 3 runs for me. |
mairacanal
added a commit
to mairacanal/linux-rpi
that referenced
this issue
Oct 4, 2024
…iptor When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [raspberrypi#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 raspberrypi#1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, explicitly stop the active performance monitor before destroying and freeing all perfmons when the file descriptor is closed. Cc: <[email protected]> # v5.15+ Closes: raspberrypi#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]>
mairacanal
added a commit
to mairacanal/linux-rpi
that referenced
this issue
Oct 4, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [raspberrypi#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 raspberrypi#1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: <[email protected]> # v5.15+ Closes: raspberrypi#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this issue
Oct 4, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: <[email protected]> # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]>
|
I slightly changed the patch as the previous one had an issue that if the active performance monitor didn't belong to the process that we were terminating, it would stop it anyway. I wrote a slightly different version of the patch with the same goal and it fixes the problem on RPi 4 and 5. I sent the fix to this issue to dri-devel mailing list: https://lore.kernel.org/dri-devel/[email protected]/T/ Also, as vc4's perfmon code is similar, I sent a fix for vc4 as well: https://lore.kernel.org/dri-devel/[email protected]/T/ @popcornmix let me know if you want me to send a PR with the patches. They will eventually land on 6.6 through the stable branch, but maybe you want to have the patches quickly in the branch. Anyway, let me know. |
|
@mairacanal a PR would be welcome. |
|
I've tested the fix and indeed fixes the issue. I'll add a R-b in the mailing list. Thanks! |
|
Can confirm that this patch intel-lab-lkp/linux@074b3b5 applied against the latest release kernel ( Thank you @mairacanal for your work, and for fixing this issue so quickly! |
mairacanal
added a commit
to mairacanal/linux-rpi
that referenced
this issue
Oct 5, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [raspberrypi#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 raspberrypi#1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
pelwell
pushed a commit
that referenced
this issue
Oct 7, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
pelwell
pushed a commit
that referenced
this issue
Oct 7, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
pelwell
pushed a commit
that referenced
this issue
Oct 7, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this issue
Oct 8, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
pelwell
pushed a commit
that referenced
this issue
Oct 10, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Oct 10, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Oct 10, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
popcornmix
pushed a commit
that referenced
this issue
Oct 14, 2024
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: #6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Reviewed-by: Juan A. Suarez <[email protected]> Signed-off-by: Maíra Canal <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this issue
Oct 14, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this issue
Oct 14, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this issue
Oct 14, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
KexyBiscuit
pushed a commit
to AOSC-Tracking/linux
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
KexyBiscuit
pushed a commit
to AOSC-Tracking/linux
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this issue
Oct 15, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 16, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 16, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 16, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 16, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 16, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Whissi
pushed a commit
to Whissi/linux-stable
that referenced
this issue
Oct 17, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
hubot
pushed a commit
to aosp-mirror/kernel_common
that referenced
this issue
Oct 17, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
hubot
pushed a commit
to aosp-mirror/kernel_common
that referenced
this issue
Oct 17, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Whissi
pushed a commit
to Whissi/linux-stable
that referenced
this issue
Oct 17, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
opsiff
pushed a commit
to deepin-community/kernel
that referenced
this issue
Oct 17, 2024
commit 7d1fd3638ee3a9f9bca4785fffb638ca19120718 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 07c51108d9e278831c16191d1223ee49986e7890)
Avenger-285714
pushed a commit
to deepin-community/kernel
that referenced
this issue
Oct 18, 2024
commit 7d1fd3638ee3a9f9bca4785fffb638ca19120718 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> (cherry picked from commit 07c51108d9e278831c16191d1223ee49986e7890)
0ctobot
pushed a commit
to 0ctobot/neutrino_kernel_google_zumapro
that referenced
this issue
Oct 19, 2024
commit 7d1fd3638ee3a9f9bca4785fffb638ca19120718 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 21, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 21, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
johnny-mnemonic
pushed a commit
to linux-ia64/linux-stable-rc
that referenced
this issue
Oct 21, 2024
commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the bug
Using v3d performance counters, e.g. from
GALLIUM_HUDleads to random kernel panics after a few runs.Steps to reproduce the behaviour
GALLIUM_HUDto show some performance counters. E.g like this:Not sure if any specific counter, or combination of, is causing this. Using just a single counter doesn't seem to crash even after several tries. Enabling 10-20 counters crashes on a second run.
Device (s)
Raspberry Pi 4 Mod. B
System
Logs
Usually panic messages and stacks are completely unrelated, I've seen from usb and ext4 call stacks.
One that might be relevant:
Additional context
No response
The text was updated successfully, but these errors were encountered: