-
Notifications
You must be signed in to change notification settings - Fork 5.1k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
8192cu not working (out of the box) #169
Comments
Actually I was unable to reproduce the successful connection for the second time, so I guess the problem lies somewhere else. Here is the kernel log dump of the failure, I always get messages like these when plugging in the dongle: Dec 2 21:43:39 raspberrypi kernel: usb 1-1.2.3: new high-speed USB device number 8 using dwc_otg |
subscribe. haven't got my EDIMAX 7811-un working yet.. |
Under latest raspbian I can get the wifi working by setting up the wpa_supplicant.conf as follows: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="hinxx" scan_ssid=1 key_mgmt=NONE } I have not looked at the dmesg messages closely this time, so I can't say what is different. Note that I do not have any encryption set, I'm just allowing specific MACs on my AP.. |
Closing as this doesn't seem to be a linux kernel issue. |
…ribute Otherwise, the kernel oopses in nla_for_each_nested when iterating over the unset attribute NFTA_SET_ELEM_LIST_ELEMENTS in the nf_tables_{new,del}setelem() path. netlink: 65524 bytes leftover after parsing attributes in process `nft'. [...] Oops: 0000 [#1] SMP [...] CPU: 2 PID: 6287 Comm: nft Not tainted 3.16.0-rc2+ #169 RIP: 0010:[<ffffffffa0526e61>] [<ffffffffa0526e61>] nf_tables_newsetelem+0x82/0xec [nf_tables] [...] Call Trace: [<ffffffffa05178c4>] nfnetlink_rcv+0x2e7/0x3d7 [nfnetlink] [<ffffffffa0517939>] ? nfnetlink_rcv+0x35c/0x3d7 [nfnetlink] [<ffffffff8137d300>] netlink_unicast+0xf8/0x17a [<ffffffff8137d6a5>] netlink_sendmsg+0x323/0x351 [...] Fix this by returning -EINVAL if this attribute is not set, which doesn't make sense at all since those commands are there to add and to delete elements from the set. Signed-off-by: Pablo Neira Ayuso <[email protected]>
I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 11749e0 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Cc: [email protected] Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f043bfc upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Jaejoong Kim <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
When arm_ffa firmware driver module is unloaded or removed we call __ffa_devices_unregister on all the devices on the ffa bus. It must unregister all the devices instead it is currently just releasing the devices without unregistering. That is pure wrong as when we try to load the module back again, it will result in the kernel crash something like below. -->8 CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169 Hardware name: FVP Base RevC (DT) Call trace: dump_backtrace+0x0/0x1cc show_stack+0x18/0x64 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 sysfs_create_dir_ns+0xe4/0x140 kobject_add_internal+0x170/0x358 kobject_add+0x94/0x100 device_add+0x178/0x5f0 device_register+0x20/0x30 ffa_device_register+0x80/0xcc [ffa_module] ffa_setup_partitions+0x7c/0x108 [ffa_module] init_module+0x290/0x2dc [ffa_module] do_one_initcall+0xbc/0x230 do_init_module+0x58/0x304 load_module+0x15e0/0x1f68 __arm64_sys_finit_module+0xb8/0xf4 invoke_syscall+0x44/0x140 el0_svc_common+0xb4/0xf0 do_el0_svc+0x24/0x80 el0_svc+0x20/0x50 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a0/0x1a4 kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to register things with the same name in the same directory. ---- Fix the issue by calling device_unregister in __ffa_devices_unregister which will also take care of calling device_release(which is mapped to ffa_release_device) Link: https://lore.kernel.org/r/[email protected] Fixes: e781858 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Tested-by: Jens Wiklander <[email protected]> Signed-off-by: Sudeep Holla <[email protected]>
commit eb7b52e upstream. When arm_ffa firmware driver module is unloaded or removed we call __ffa_devices_unregister on all the devices on the ffa bus. It must unregister all the devices instead it is currently just releasing the devices without unregistering. That is pure wrong as when we try to load the module back again, it will result in the kernel crash something like below. -->8 CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169 Hardware name: FVP Base RevC (DT) Call trace: dump_backtrace+0x0/0x1cc show_stack+0x18/0x64 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 sysfs_create_dir_ns+0xe4/0x140 kobject_add_internal+0x170/0x358 kobject_add+0x94/0x100 device_add+0x178/0x5f0 device_register+0x20/0x30 ffa_device_register+0x80/0xcc [ffa_module] ffa_setup_partitions+0x7c/0x108 [ffa_module] init_module+0x290/0x2dc [ffa_module] do_one_initcall+0xbc/0x230 do_init_module+0x58/0x304 load_module+0x15e0/0x1f68 __arm64_sys_finit_module+0xb8/0xf4 invoke_syscall+0x44/0x140 el0_svc_common+0xb4/0xf0 do_el0_svc+0x24/0x80 el0_svc+0x20/0x50 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a0/0x1a4 kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to register things with the same name in the same directory. ---- Fix the issue by calling device_unregister in __ffa_devices_unregister which will also take care of calling device_release(which is mapped to ffa_release_device) Link: https://lore.kernel.org/r/[email protected] Fixes: e781858 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Tested-by: Jens Wiklander <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit dbb4cfe ] The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dbb4cfe ] The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dbb4cfe ] The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dbb4cfe ] The interrupt handling should be related to the firmware version. If the driver matches an old firmware, then the driver should not handle interrupt such as i2c or dma, otherwise it will cause some errors. This log reveals it: [ 27.708641] INFO: trying to register non-static key. [ 27.710851] The code is fine but needs lockdep annotation, or maybe [ 27.712010] you didn't initialize this object before use? [ 27.712396] turning off the locking correctness validator. [ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty raspberrypi#169 [ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.714149] Call Trace: [ 27.714329] <IRQ> [ 27.714480] dump_stack+0xba/0xf5 [ 27.714737] register_lock_class+0x873/0x8f0 [ 27.715052] ? __lock_acquire+0x323/0x1930 [ 27.715353] __lock_acquire+0x75/0x1930 [ 27.715636] lock_acquire+0x1dd/0x3e0 [ 27.715905] ? netup_i2c_interrupt+0x19/0x310 [ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60 [ 27.716544] ? netup_i2c_interrupt+0x19/0x310 [ 27.716863] netup_i2c_interrupt+0x19/0x310 [ 27.717178] netup_unidvb_isr+0xd3/0x160 [ 27.717467] __handle_irq_event_percpu+0x53/0x3e0 [ 27.717808] handle_irq_event_percpu+0x35/0x90 [ 27.718129] handle_irq_event+0x39/0x60 [ 27.718409] handle_fasteoi_irq+0xc2/0x1d0 [ 27.718707] __common_interrupt+0x7f/0x150 [ 27.719008] common_interrupt+0xb4/0xd0 [ 27.719289] </IRQ> [ 27.719446] asm_common_interrupt+0x1e/0x40 [ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.724289] default_idle+0x9/0x10 [ 27.724537] arch_cpu_idle+0xa/0x10 [ 27.724791] default_idle_call+0x6e/0x250 [ 27.725082] do_idle+0x1f0/0x2d0 [ 27.725326] cpu_startup_entry+0x18/0x20 [ 27.725613] start_secondary+0x11f/0x160 [ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb [ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 27.726768] #PF: supervisor read access in kernel mode [ 27.727138] #PF: error_code(0x0000) - not-present page [ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0 [ 27.727999] Oops: 0000 [raspberrypi#1] PREEMPT SMP PTI [ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty raspberrypi#169 [ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.736744] Call Trace: [ 27.736924] <IRQ> [ 27.737074] netup_unidvb_isr+0xd3/0x160 [ 27.737363] __handle_irq_event_percpu+0x53/0x3e0 [ 27.737706] handle_irq_event_percpu+0x35/0x90 [ 27.738028] handle_irq_event+0x39/0x60 [ 27.738306] handle_fasteoi_irq+0xc2/0x1d0 [ 27.738602] __common_interrupt+0x7f/0x150 [ 27.738899] common_interrupt+0xb4/0xd0 [ 27.739176] </IRQ> [ 27.739331] asm_common_interrupt+0x1e/0x40 [ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20 [ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6 [ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6 [ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408 [ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000 [ 27.744157] default_idle+0x9/0x10 [ 27.744405] arch_cpu_idle+0xa/0x10 [ 27.744658] default_idle_call+0x6e/0x250 [ 27.744948] do_idle+0x1f0/0x2d0 [ 27.745190] cpu_startup_entry+0x18/0x20 [ 27.745475] start_secondary+0x11f/0x160 [ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb [ 27.746123] Modules linked in: [ 27.746348] Dumping ftrace buffer: [ 27.746596] (ftrace buffer empty) [ 27.746852] CR2: 0000000000000002 [ 27.747094] ---[ end trace ebafd46f83ab946d ]--- [ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310 [ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02 [ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046 [ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000 [ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8 [ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001 [ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000 [ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400 [ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0 [ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt [ 27.755033] Dumping ftrace buffer: [ 27.755279] (ftrace buffer empty) [ 27.755534] Kernel Offset: disabled [ 27.755785] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Pu Lehui says: ==================== patch 1 fix a minor issue where usdt_cookie is cast to 32 bits. patch 2 add support riscv libbpf USDT argument parsing logic, both RV32 and RV64 tests have been passed as like follow: # ./test_progs -t usdt raspberrypi#169 usdt:OK Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED ==================== Signed-off-by: Andrii Nakryiko <[email protected]>
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
Hi all,
I'm was trying to use 8192cu based USB wireless network adapter on the rpi. I could not get it working with several rpi distros until I noticed in kernel logs that that ssid always contained garbage.
...
Dec 2 21:05:57 raspberrypi kernel: rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
Dec 2 21:05:57 raspberrypi kernel: -871x_drv - drv_close, bup=1
Dec 2 21:05:57 raspberrypi kernel: =>rtw_wx_set_essid
Dec 2 21:05:57 raspberrypi kernel: ssid=���
z��t]O��٣O�F�q����@=��� ��� ���, len=32Dec 2 21:05:57 raspberrypi kernel: Set SSID under fw_state=0x00000008
Dec 2 21:05:57 raspberrypi kernel: <=rtw_wx_set_essid, ret 0
...
At this point it would obviously fail to get connected to any APs.
As proof of concept I've hacked the ioctl_linux.c and hardcoded the ssid I want to use and voila it worked.
...
Dec 2 21:05:57 raspberrypi kernel: +871x_drv - drv_open, bup=1
Dec 2 21:05:57 raspberrypi kernel: -871x_drv - drv_open, bup=1
Dec 2 21:05:58 raspberrypi kernel: survey done event(16)
Dec 2 21:05:58 raspberrypi kernel: [by_bssid:0][assoc_ssid:hinxx][to_roaming:0] new candidate: hinxx(68:7f:74:10:9b:2d) rssi:-64
Dec 2 21:05:58 raspberrypi kernel: rtw_select_and_join_from_scanned_queue: candidate: hinxx(68:7f:74:10:9b:2d)
Dec 2 21:05:58 raspberrypi kernel: link to Broadcom AP
Dec 2 21:05:59 raspberrypi kernel: link to Broadcom AP
Dec 2 21:05:59 raspberrypi kernel: issue_deauth to 68:7f:74:10:9b:2d
Dec 2 21:05:59 raspberrypi kernel: OnAuthClient
...
I have followed several guides on how to get this kind of card to work on rpi, and have setup wlan0 like this:
/etc/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="hinxx"
}
/etc/network/interfaces:
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf
I wonder if someone else had issues with this..
My AP is set not to broadcast ssid, it that might matter.. But there are other APs near me and I would probably need to see them also .. just a thought.
Also, I've used the latest driver sources from Realtek (rtl8188C_8192C_usb_linux_v3.4.4_4749.20121105.tar.gz) and dumped them into the linux source tree for this test.
The text was updated successfully, but these errors were encountered: