[Keyboard] Add ReverseStudio-DecadePad

keyboards/reversestudio/decadepad/config.h

@@ -0,0 +1,81 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ReverseStudio
+#define PRODUCT         DecadePad
+#define DESCRIPTION     6x4Pad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/* NIU Mini PCB default pin-out */
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN D5
+#ifdef RGB_DI_PIN
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 20
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/reversestudio/decadepad/decadepad.c

@@ -0,0 +1,12 @@
+#include "decadepad.h"
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)){
+        // writePin sets the pin high for 1 and low for 0.
+        // In this example the pins are inverted, setting
+        // it low/0 turns it on, and high/1 turns the LED off.
+        // This behavior depends on whether the LED is between the pin
+        // and VCC or the pin and GND.
+        writePin(D4, led_state.num_lock);
+    }
+    return true;
+}

keyboards/reversestudio/decadepad/decadepad.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+#define LAYOUT_numpad_6x4( \
+   k01, k02, k03, k04, \
+   k11, k12, k13, k14, \
+   k21, k22, k23,      \
+   k31, k32, k33, k34, \
+   k41, k42, k43,      \
+   k51,      k53, k54  \
+) \
+{ \
+    { k01, k02,   k03, k04     }, \
+    { k11, k12,   k13, k14     }, \
+    { k21, k22,   k23, KC_NO   }, \
+    { k31, k32,   k33, k34     }, \
+    { k41, k42,   k43, KC_NO   }, \
+    { k51, KC_NO, k53, k54     }, \
+}

keyboards/reversestudio/decadepad/info.json

@@ -0,0 +1,38 @@
+{
+    "keyboard_name": "DecadePad",
+    "url": "",
+    "maintainer": "huajijam",
+    "width": 6,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 21,
+            "layout": [
+                {"x":0, "y":0},
+                {"x":0, "y":1},
+                {"x":0, "y":2},
+                {"x":0, "y":3},
+                {"x":0, "y":4},
+                {"x":0, "y":5, "w":2},
+
+                {"x":1, "y":0},
+                {"x":1, "y":1},
+                {"x":1, "y":2},
+                {"x":1, "y":3},
+                {"x":1, "y":4},
+
+                {"x":2, "y":0},
+                {"x":2, "y":1},
+                {"x":2, "y":2},
+                {"x":2, "y":3},
+                {"x":2, "y":4},
+                {"x":2, "y":5},
+
+                {"x":3, "y":0},
+                {"x":3, "y":1},
+                {"x":3, "y":2, "h":2},
+                {"x":3, "y":4, "h":2},
+            ]
+        }
+    }
+}

keyboards/reversestudio/decadepad/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_numpad_6x4(
+  RGB_TOG,  RGB_MOD, RGB_VAI, RGB_M_R,   \
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,    \
+  KC_P7,   KC_P8,   KC_P9,               \
+  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,    \
+  KC_P1,   KC_P2,   KC_P3,               \
+  KC_P0,   KC_PDOT, KC_PENT              \
+),            
+};

keyboards/reversestudio/decadepad/keymaps/default/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_6x4(
+    RGB_TOG,  RGB_MOD,  RGB_VAI,  RGB_M_R,
+    KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
+    KC_P7,    KC_P8,    KC_P9,        
+    KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
+    KC_P1,    KC_P2,    KC_P3,    
+    KC_P0,              KC_PDOT,  KC_PENT        
+  ) 
+};

keyboards/reversestudio/decadepad/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+LAYOUTS = numpad_6x4
+LAYOUTS_HAS_RGB = no

keyboards/reversestudio/readme.md

@@ -0,0 +1 @@
+Made By huajijam