Keymap FAQ: fix positions of KC_HENK and KC_MHEN for JIS layout #4482
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
These keys were previously in each other's positions.
luandy64
added a commit
to luandy64/qmk_firmware
that referenced
this pull request
Dec 5, 2018
* Make Ergodox EZ Glow's rgb matrix user configurable * Fix i2c_master.d listed more than once warning * Add default glow board * Fix my community layouts (qmk#4449) * fix formatting of keymap * update readme with boards I currently own * made the wrong assumption that every board would use the same space for backspace * update readme with boards I currently own * Delete readme.md * Fix permanently on capslock led on Atom47 (qmk#4452) * Fix UCIS code Revert code change that broke UCIS due to bad suggestions * Adaptive debounce logic The debounce filtering reports a key/switch change directly, without any extra delay. After that the debounce logic will filter all further changes, until the key/switch reports the same state for the given count of scans. So a perfect switch will get a short debounce period and a bad key will get a much longer debounce period. The result is an adaptive debouncing period for each switch. This value defines how often the same key/switch state has to be detected in successive reads until the next key state can be reported. In other words this value defines the minimum debouncing period for a switch. * Update Levinson readme to support elite-c (qmk#4445) * init - updated levinson readme to support elite-c * updated readme per PR comment * added trailing spaces to lines 6 7 8 * updated readme bootloader instructions * updated readme * updated readme * Keyboard: Add Handwired 108 Key with Trackpoint (qmk#4448) * Include both base keyboards * Merge the keymap * Merge the configs * Add wiring diagram for clarity of documentation * Merge rules * Merge keyboard sources * Change names to compile * Update documentation to suit * Add qwerty layout to 108keyTrackpoint * Separate the dvorak standard layout from a media focused one * Update documentation to reflect new keymaps * [style] Add empty lines at ends of files * [style] Meet current QMK style guide * Bring READEME closer to the QMK template * [style] Change all "108keyTrackpoint" to "108key_trackpoint" * [style] Use "LAYOUT" instead of "KEYMAP" QMK terminology has changed Co-Authored-By: mkem114 <[email protected]> * Add two spaces after maintainer in README This is required to render properly Co-Authored-By: mkem114 <[email protected]> * Remove redundant line "PREVENT_STUCK_MODIFIERS" is default on for QMK Co-Authored-By: mkem114 <[email protected]> * Change include of keymaps to use QMK_KEYBOARD_H This includes automatically * Update make rules to match template * Change from KC_MENU to KC_APP The button functionality actually wanted is the context menu key * [style] Change "dvorakMedia" to "dvorak_media" * Update README to reflect minor changes * Fix row 11 * Keymap: Update keymap to match latest changes to Wilba's firmware. (qmk#4432) * Fix firmware to work with latest Wilba changes (i.e. dynamic keymap) and M60a. * Get back RGB Backlight codes. * More tweaks. * Update users/talljoe/rules.mk Co-Authored-By: Talljoe <[email protected]> * Fix raw hid define for chibios (qmk#4460) * Keymap: Clone layout for Massdrop's xd75 (qmk#4461) * Added default75. No lighting. * Added default75. No lighting. * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Fixes for pull request * Updated keyboard declartion structure * ergodox: update algernon's layout to v1.12 This is the final version of my layout. Overall changes =============== * Updated to work with QMK master. Miscellaneous ============= * The `😂` symbol can be entered with UCIS. * `LEAD r` now inputs `Right Alt`. Signed-off-by: Gergely Nagy <[email protected]> * Add EEPROM_RESET keycode to keycodes.md doc (qmk#4473) * Add RCTL to my Planck layout (qmk#4475) * Adding my new keymap for the Idobo (qmk#4468) * Adding my new keymap, based of xd75, with leds enabled via the rules.mk file * cleaned up the rules file * Per Change Requests: removed deprecated functions along with updated the map to use the layout macro instead of raw matrix * fix diffutils arch package name (qmk#4470) * Adding keymap layers for 40precentclub/foobar (qmk#4481) * Keymap FAQ: fix positions of KC_HENK and KC_MHEN for JIS layout (qmk#4482) These keys were previously in each other's positions. * Add Espectro ISO layout (qmk#4479) * Add Espectro ISO layout * Remove unused define from Espectro ISO layout * added ep/96 as a supported keyboard (qmk#4476) * added ep/96 * Update keyboards/ep/96/readme.md Co-Authored-By: e11i0t23 <[email protected]> * removed led code * Update keyboards/ep/96/config.h Co-Authored-By: e11i0t23 <[email protected]> * Update keyboards/ep/96/info.json Co-Authored-By: e11i0t23 <[email protected]> * Update keyboards/ep/96/readme.md Co-Authored-By: e11i0t23 <[email protected]> * Fix Blockey compiler (and size) issues (qmk#4390) * Keymap: add Interrobang (qmk#4420) * remove clmk and dvrk and backlight; switch esc and enter to be modtap; add meh key * change songs * space cadet; move enter; move '"; move pgup pgdn * remove extra songs * update from noahfredrick keymap * make it easier to type ../../thing/*/* * move pipe * requested changes * add interrobang support * add shift-insert to raise-v and lower-v, move pipe to raise-/lower-n * Keyboard: 40percentclub - enable 4x4 and 5x5 community keymaps (qmk#4437) * Enable 4x4 and 5x5 community keymap support * Pull 4x4 community keymap fixes from @noroadsleft * Build fixes for guidoism keymap - move keymap to layouts/community/planck_mit as it uses the LAYOUT_planck_mit macro * Keymap: Refactor edvorakjp user library (qmk#4480) * Refactor edvorakjp user library * add tap dance support * update keymaps * edvorakjp: add SWAP_SCLN option * fix behavior of SWAP_SCLN * Keyboard: 5291 firmware to replace the existing soarers controller firmware (qmk#4483) * compiles but is not working * still testing 5291 * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * fixed some issues * doumentation needed * doumentation needed * documentation needed * documentation needed * Update readme.md documentation * Update readme.md i dislike markdown <_> * merge preperation * Keyboard: add generic ortho 5x15 layout support to Idobo (qmk#4486) * Add support for PR and Issue templates to QMK_firmware GitHub (qmk#4491) * Add support document * Add Bug Report * Add GitHub Pull Request Template * Feature request issue template * Touch up feature request template * Add 'other issues' template * move support doc * Revert "Add support for PR and Issue templates to QMK_firmware GitHub (qmk#4491)" (qmk#4492) This reverts commit b91dfa0. * Keyboard: Enable community ortho 4x12 layouts for lets split eh (qmk#4487) * Enable ortho_4x12 community layouts for lets_split_eh * Keymap build fixes now that ortho_4x12 is enabled * Keymap build fixes now that ortho_4x12 is enabled * Update to drashna userspace and keymaps (qmk#4459) * Fix reversed bool check in layer_state_set * Add Quefrency 65 for a friend * Add Ergodox EZ Glow keymap * Add RGB Matrix Code * Further changes to rgb matrix ErgoDox EZ * Update bjohnson keymaps * Fix CRKBD display * Overhaul to corne keyboard * Narrow scope for keylogger * Minor layout tweaks to Corne Keyboard * additional CRKBD tweaks * Minor tweaks to CRKBD * Add all characters for keylogger * Ergodox EZ Glow overhaul * Fix Ergodox EZ Glow layer colors * Increase Tapping Term for Corne Keyboard * Fix unicode-ish * Revert some changes * Add layer specific lighting effects * Some minor tweaks to ergodox glow config * revert changes to ergodox files * Update Glow readme * Add more tapping term defines * Fix changes * Fix ergodox keymap * Hopefully fix sleeping * Disable layer indications if rgb matrix is disabled * Add support for sleeping and rgb layer change toggle to ergodox ez glow * Make RGB Layer Indication Great Again * Make Unicode Great Again * Remove placeholder define Co-Authored-By: drashna <[email protected]> * Remove placeholder define Co-Authored-By: drashna <[email protected]> * Remove old EEPROM Reset keycode * Keymap: Fix build errors for non-Zeal boards. (qmk#4496) * handwired/arrow_pad Refactor and Configurator support (qmk#4498) * handwired/arrow_pad: layout macro and keymap refactor - Layout macros moved from the keymaps to arrow_pad.h. - LAYOUT_pad21 refactored to only accept keys that are physical present (no KC_NO entries required in keymap) - Keymaps now use #include QMK_KEYBOARD_H - Keymaps refactored to use process_record_user function (from action_get_macro) * handwired/arrow_pad: Readme cleanup Fixed the make commands and updated the layout macro. * handwired/arrow_pad: Configurator support * Fix Helix ws2812.c listed more than once warning. (qmk#4499) Remove `SRC += ws2812.c` from helix/rev2/rules.mk and helix/pico/rules.mk. Because it will be added in common_features.mk. * Keymap: Set serial connection as default for the Redox rev1.0 keyboard (qmk#4488) * Set serial as default for Redox * Updated rules.mk file * Removed unused rule Co-Authored-By: mattdibi <[email protected]> * Removed unused rule Co-Authored-By: mattdibi <[email protected]> * Keymap: Added abishalom keymaps (qmk#4495) * Added abishalom keymaps Added personal keymaps for Massdrop Alt and Tada68 * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/config.h Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Updated keymaps * Bugfix Tada68 * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Fixed docs/newbs_testing_debugging.md and tmk_core/common/print.h * Puck Macropad (qmk#4274) * Add Puck * Update Manufacturer name in metadata * Add num lock to high layer * update pins * update pin settings * fix numlock key * Cleanup config.h * Update device info * updates after review * Update MSYS to use the 5.4.0 toolchain (qmk#4106) * Ergodox EZ: Remove Unused Code From Keymap * Ergodox EZ: Clean Up process_record_user Function Set ERPM = SAFE_RANGE * Add tap_code16 function (qmk#4362) * Keyboard: fix for debug crkbd (qmk#4469) * fixed misplaced paranthesis in arm usb mouse send function (qmk#4478) bug was causing lots of dropped events for me. * Remove RGB_SMOD alias and replace uses with RGB_MOD (qmk#4319) * Turn off Mousekeys for several ps2avrGB keyboards (qmk#4502) * Turn off Mousekeys for jc65 * Turn off Mousekeys for ps2avrGB templates * Disable mousekeys for bmini and canoe as well * [fortitude60] match default keymap comment to the implementation. (qmk#4508) * Added Rick Roll to song lists (qmk#4510) 🙂 * Add Extrakey support for Brightness up/down (qmk#4477) * Keyboard: handwired/bluepill Configurator support and readme cleanup (qmk#4509) * handwired/bluepill/bluepill70: Configurator support * handwired/bluepill: readme cleanup Formatting fixes to make the file easier to read. * Keyboard: add newgame (qmk#4466) * Add files via upload * Add files via upload * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/newgame40.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Add readme (newgame40) * Update keyboards/newgame40/readme.md Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/readme.md Co-Authored-By: GoTakigawa <[email protected]> * Update keymap.c * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Add files via upload * remove community/ortho_4x10 * Typo fix (qmk#4515) * New Keyboard: Cyclops (qmk#4512) * initial commit * add correct atmega32u4 pins used * add a basic layout * add simple keymap * update readme * Add QMK Configurator support * add whitespace for formatting * Test out i18n of the docs (qmk#4519) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * Added macros to Dynamic Keymaps, Zeal60 RGB backlight improvements (qmk#4520) * Refactored M6-B to use Zeal60 RGB backlight code * Fixed M6-B LED co-ordinates * Minor changes to RGB config for Zeal65 * Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A * Macro implementation * Implemented macros, API protocol version 8, RGB backlight fixes * Improved radial effects for M6-B * Fixed undefined references when building an RGB keyboard after M6-A * Planck: Align Keycode Columns (qmk#4523) Remove Extra Newlines * Add a layout to support tsangan bottom row with split bs and rshift (qmk#4521) * Add a layout to support tsangan bottom row with split bs and rshift * Move the new layout to defaults * Rename layout to be more accurately representative * Rename files to match renamed layout def * Add tap_random_base64 and software timer info to Useful Functions doc (qmk#4360) * Update docs * Add security caveat Co-Authored-By: drashna <[email protected]> * Wordsmithing Co-Authored-By: drashna <[email protected]> * Update docs/ref_functions.md Co-Authored-By: drashna <[email protected]> * Add support for S7 Elephant (qmk#4511) * Add support for S7 Elephant A high-end 70% custom keyboard designed and produced by jacky from Geekhack. * Polish S7 Elephant code Implement drashna's suggestions: - specify bootloader - remove unnecessary defines - use led_set_user() for LED logic * Correct info.json and s7_elephant.h Correct info.json and s7_elepant.h to follow QMK convention and fix a missing curly bracket. * handwired/ortho5x13 default keymap refactor, Configurator support, and readme update (qmk#4525) * handwired/ortho5x13: default keymap refactor - keymap now uses LAYOUT macro - keymap now uses #include QMK_KEYBOARD_H - removed redundant KC_TRNS and KC_NO definitions * handwired/ortho5x13: Configurator support * handwired/ortho5x13: fix Docs links in readme * handwired/promethium Refactor and Configurator support (qmk#4524) * handwired/promethium: refactor - config.h files - updated to use #pragma once - removed redundant config.h includes - layout macro moved from config.h to promethium.h - layout macro renamed from KEYMAP_CUSTOM to LAYOUT * handwired/promethium: Configurator support * Keyboard: Add HHKB layout support to the DO60 (qmk#4526) * add 60_hhkb support * add qmk configurator support for the new 60_hhkb layout * allow community layout support for the 60_hhkb * fixup readme to adhere to new QMK standards * Keyboard: Enable Lights by Default for Kira 75 (qmk#4527) * enable rgb underglow and backlights by default for use with QMK Configurator * disable mousekeys * Keyboard: handwired/atreus50 Refactor, Configurator support, and readme cleanup (qmk#4530) * handwired/atreus50: refactor - layout macro renames: - KEYMAP is now LAYOUT - COMPACT_KEYMAP is now LAYOUT_kc - keymap updates: - both keymaps now use #include QMK_KEYBOARD_H - removed redundant KC_TRNS and KC_NO definitions - default keymap now uses LAYOUT macro instead of LAYOUT_kc * handwired/atreus50: readme cleanup Reformatted the readme to be more closely aligned to current QMK template, and fixed some typos/grammar. * handwired/atreus50: Configurator support * Second try at configuring i18n for docsify and gitbook (qmk#4531) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * add fallback langurages * Create LANGS.md * Rename docs/zh-cn/README.md to docs/zh/README.md * Update LANGS.md * Update index.html * Add sidebar for ZH (qmk#4533) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * add fallback langurages * Create LANGS.md * Rename docs/zh-cn/README.md to docs/zh/README.md * Update LANGS.md * Update index.html * Delete README.md * add sidebar for zh * Add edvorakjp kepmap for crkbd (qmk#4537) * edvorakjp layout for crkbd * bugfix of edvorakjp QMK cannot send keycode that doesn't exists on new layer. * Fix up RGB Matrix code (qmk#4503) * Fix up RGB Matrix code * Convert RGBLIGHT functions to rgbmatrix ones, and add defines * Make ARM Audio max volume configurable (qmk#4540) * Make ARM Audio max volume configurable * Update docs/feature_audio.md Co-Authored-By: drashna <[email protected]> * Update docs/feature_audio.md Co-Authored-By: drashna <[email protected]> * Keymap: Fixed include statement in my Let's Split keymap. (qmk#4543) * keymap + alpha * some fixes * keymap + alpha * some fixes * drashna changes * linked main Alpha repo in keyboards/alpha readme * missed a spot * there's another function called FUNC lol * keymap + alpha * some fixes * keymap + alpha * drashna changes * Fixed include * Revert "Fixed include" This reverts commit ea92f26. * messed up my git, fixed include * Keymap: adding my keymap primarily to iris (qmk#4541) * adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (qmk#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice * Keymap: Ergodox EZ: Clean Up Keymap Array Alignment (qmk#4545) Remove layer name comments, they are above the visual layout Remove comments explaining things that are documented in qmk docs * Invalid JSON (qmk#4547) * Rework drashna userspace to be more modular (qmk#4544) * Break up files to make more readable * Add comments to ortho 4x12 layout rules.mk * Small tweaks * Update GitLab CI scripts * Make ortho boards smaller * Keyboard: Add new keyboard "Sol" from RGBKB (qmk#4497) * Add final RGBKB Sol firmware * Apply suggestions from code review Apply most of the changes noroadsleft has suggested Co-Authored-By: Legonut <[email protected]> * Cleanup readme * Cleanup keymaps per @noroadslefts suggestions * Remove eeproms, use set_single_persistent_default_layer * Suggestions from @noroadsleft and @drashna some small cleanup * Change RGB_SMOD to RGB_RMOD * fix RGB_SMOD * Apply suggestions from code review Remove redundant lines Co-Authored-By: Legonut <[email protected]> * Keymap: Hacker Dvorak (qmk#4514) * Hacker Dvorak Programmer Dvorak based layout for the Ergodox EZ. * Address drashna comments. * Fix RGB and drop OSL for MO. * Add gulp file to automate development. * Fix gulpfile. * Caps, num and scroll lock indicators. * Fix scroll lock. * Major revisions, focused on streamlining and useability (qmk#4554) * Keyboard: Initial nori port (qmk#4542) * Initial nori port * ortho_4x4 layout and RGB fixes * Review fixes for superseded audio and default layer functionality * Keymap: Wanleg layout updates (qmk#4550) * config fixes (including for issue qmk#3678) * put back audio * jj40 backlighting setup * jj40 backlighting setup * rules.mk fix * jj40 backlighting settings * iris setup * iris setup * iris setup * iris setup * iris setup - onehand * remove commented-out section * edits due to qmk#4403 * xd75 testing * fix 5x15 layout issues with 5x5 bluetooth & xd75 * commenting out unused placeholders * change iris to more wanleg-like 4x12 layout * formatting changes * onehand layout cleanup/fix * revert temp change * Only try to read the report ID from SetReport when the keyboard is part of the shared EP Fixes qmk#4471 Fixes qmk#4517 * Keyboard: Add dz60 tsangan hhkb (qmk#4529) * Add tsangan bottom row hhkb layout for dz60 * Add crd's tsangan hhkb layout for dz60 * Resort to native key aliases when they exist * Update crd's dz60 ansi keymap to match updates for hhkb fn layer * Add tsangan hhkb layout to dz60 info.json for KLE * Fix JSON nesting in dz60 layouts block * Minor adjustments to crd layouts to make them more consistent * Update layout naming to 60_tsangan_hhkb * Keymap: Preonic kuatsure updates 2018-Nov (qmk#4500) * preonic-kuatsure: ctrl / esc in one key + hello ` again * preonic-kuatsure: remove esc on lower * preonic-kuatsure: programmy macros * user-kuatsure: turn off console all the time * preonic-kuatsure: auto shift, but only for numbers * preonic-kuatsure: remove programmery macros * preonic-kuatsure: move braces, parens, etc over to raise backwards compat move &*() on lower * preonic-kuatsure: stop with the full rep of game layer * Keyboard: Updated sixshooter keyboard to move LED macros into the default keymap. (qmk#4428) * Keyboard: Refactor lets split to use split common code (qmk#4536) * Refactor lets split to use split common code * Refactor lets split to use split common code * Build fixes for OLED_sample keymap * Build fixes for OLED_sample keymap - attempt to reduce firmware size * Re-order feature list in sidebar (qmk#4555) Specifically, moved the shifted keycodes to the top of the 'Feature' list, so it's more visible. This way, all of the keycodes are at the top of the list, rather than having the shifted keys at the bottom, so they should be easier to find since they're all in one place. * Changed location of mouse 3, and arrow keys (qmk#4556) * Keyboard: Fixes for superseded audio and default layer functionality (qmk#4557) * Keyboard: Initial i75 port (qmk#4553) * Initial i75 port - currently supporting promicro and teensy2 * Initial i75 port - review fixes
zer09
pushed a commit
to zer09/qmk_firmware
that referenced
this pull request
Dec 8, 2018
…4482) These keys were previously in each other's positions.
robenkleene
added a commit
to robenkleene/qmk_firmware
that referenced
this pull request
Dec 17, 2018
* Add Tragicforce 68 layout for split backspace and add configurator layouts (#4378) * Add xd75/billypython keymap (#4381) * Add xd75/billypython keymap * Expand rules.mk (cherry picked from commit 806fee94ae3a21b6ca7a34624101349b57d41b75) * Expand billypython's rules.mk * Remove unused stuff in whitefox/billypython * Configurable Rainbow Swirl range (#4376) * Configurable Rainbow Swirl range This allows tweaking of the rainbow effect to get different effects on keyboards with varied LED layouts. We found the value 1950 works on the RGBKB.net Sol to get a cool striped effect across the keyboard. * Document RGBLIGHT_RAINBOW_SWIRL_RANGE * Better wording for the documentation * Fix misspelled make option, format rules.mk files (#4382) * Add Layout-b for GH60 satan (#4123) * Add Layout-b for GH60 satan * Update layout, toggle for colemak layout * Rename layout, replace function with KC_GESC * Update Layer order, Readme * Remove unnecessary code * Add backspace in extend layer * Keyboard: fix ifdef for crkbd's default/keymap.c undef SSD1306OLED should not kill entire process_record_user() function. * Keyboard: Add 30wer config and keymap (#4386) * Preliminary 30wer firmware. Not tested on real board yet. * Added a layer to default 30wer keymap. * Wrote readme for 30wer. * Added 30wer info.json. * relocate 40percent.club boards to new parent folder (#4380) * Initial move of 40percent.club boards to common parent folder. * Refactor readme files to be consistent * Refactor readme files to be consistent - fix make command examples. * Refactor readme files to be consistent - align readme filenames. * Refactor readme files to be consistent - fix repo url. * Disable Community keymap builds as they are currently failing due to missing functionality * Move more of 40percent.club boards to common parent folder. * Refactor readme files to be consistent - align readme filenames. * Refactor readme files to be consistent - fix make command examples. * Keymap: dlg's tada68 keymap (#4289) * dlg's keymap * fix list order * remove cruft * pragma Co-Authored-By: dlgoodr <[email protected]> * turn on bootmagic, enable swapping ` and Esc while I figure out which compromise is least bad * Add my new ANSI layout dz60 setup (#4397) * minor additions to alps64 and dz60 * Rename crd keymap to represent 2u lshift layout * Add crd's new ANSI layout dz60 with preferred layers * Added support for backlight on diverge3 , and added a UK iso layout (#4392) * Added support for backlight , and a UK iso layout Added support for backlight , and a UK iso layout. Now uses the SPLIT_KEYBOARD #define rather than relying on lets split * Update keyboards/diverge3/keymaps/isoUK/keymap.c Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/isoUK/keymap.c Co-Authored-By: mcmadhatter <[email protected]> * Simplified the lower layer Simplified the lower layer * dir rename to snake case dir rename to snake case * changed dir case changed dir case * Update keyboards/diverge3/rules.mk Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/config.h Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/config.h Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/keymap.c Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/keymap.c Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/keymap.c Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/config.h Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/config.h Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/config.h Co-Authored-By: mcmadhatter <[email protected]> * Update keyboards/diverge3/keymaps/iso_uk/config.h Co-Authored-By: mcmadhatter <[email protected]> * aligned and tidyied up aligned and tidyied up * IDOBO Keyboard Support (75Keys Aluminum Keyboard) (#4401) * initial commit * put my name everywhere * get the switch matrix correct * add a basic keymap * use a better LAYOUT macro * update readme * Add QMK Configurator support * Keymap: Add default keymap from web for 1up60hse (#4351) * Keymap for random key presses for the scrabblepad (#4356) * Random key presses for scrabblepad * Fix keymap code comments * Remove unused methods as per code review * I2C driver docs (#4298) * I2C driver docs - Added I2C driver docs. - Changed arm master i2c driver to have a weak i2c_init as it is impossible to account for all possible port configuration in the STM32 world. * Update docs/i2c_driver.md Co-Authored-By: yiancar <[email protected]> * Update docs/i2c_driver.md Co-Authored-By: yiancar <[email protected]> * Update docs/i2c_driver.md Co-Authored-By: yiancar <[email protected]> * Update docs/i2c_driver.md Co-Authored-By: yiancar <[email protected]> * GPIO release fix * Improve new_project script (#4373) * Improve new_project script - use git user.name if available to replace the boilerplate name in files we generate - fix shellshock warnings * Test for git repo Suggestion by @skullydazed * Fix shellshock warning * Incorporate feedback from reviewers - thanks @vomindoraan - use a heredoc instead of echo for console - factor out common paths * Add support for slackware distribution (linux_install.sh) (#4369) * Add support for slackware distribution (linux_install.sh) The required packages are not provided by the official repository. The packages need to be installed from slackbuilds.org either manually or with the help of third party tools like sbotools. * Modify linux_install.sh according to code review Modifies the Slackware section of the linux_install.sh script based on the suggestions from the code review. * Modify utils/linux_install.sh according to suggestions * Keyboard: Initial 25 port (#4394) * Initial 25 port * Initial 25 port - fix info.json and hand_swap_config * Review comments - fix layout macros, copyright comments, and duplicated use of layering macros * Tidy 40percentclub boards (#4403) * Remove unnecessary re-definitions for XXXXXXX and _______ * Update 6lit to use KC_NO in layout macros * Update rules.mk to follow current template * Remove use of deprecated function action_get_macro - unused and contents were from old template * Remove use of deprecated function action_get_macro - all code was commented out * Remove use of deprecated function action_get_macro - convert macro to use process_record_user * Convert keymap to consistent use of _______ * fix use of old style header guards * Swap KC_NO for XXXXXXX macro since the swap to the macro for KC_TRANS * Resolve use of ?= in rules.mk files * Remove duplication of rules.mk and config.h in gherkin mjt keymap * Remove unnecessary #includes * Align layout macros so foobar can use gherkin keymaps * Align 6lit layout macros with foobar * Remove ifndef QUANTUM_DIR from keymaps * Add rules.mk to ortho_4x12/buswerks keymap (#4405) * Added buswerks keymap * cleaned up comments on buswerks keymap * Added buswerks keymap readme.md * Fixed spelling in buswerks readme.md * Removed unnecessary includes, changed process_record_user to now use set_single_persistent_default_layer(), removed deprecated functions, and moved the audio ifdef block to config.h * Changed buswerks ortho_4x12 layout to accommodate 'MIT' layout * Updated README.md to reflect layout changes * update buswerks keymap * add buswerks tragicforce68 keymap * Add missing arm gcc compiler for openSUSE 15.0 and Tumbleweed. * Make sure that avr-gcc@7 gets linked into the path on MacOS. * Fix up screen off timer of crkbd (#4346) * fix about screen off timer * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty. * Revert "fix about screen off timer" This reverts commit 3d175f2340c14250a71af78afec5a1e890d9f4e7. * Fix up screen off timer of crkbd * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty. * Fix up screen off timer of helix * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty * Revert "Fix up screen off timer of helix" This reverts commit f0efb82443a7dc34b75579359b0514e8bfa51100. * Improve internal processing of process_record_kb() * Use the return value of process_record_gfx() * Fix a indent Fix a indent * Fix up screen off timer of helix (#4347) * Fix up screen off timer of helix * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty * Changing referenIng incorrect constant name * OLED_ENABLED => SSD1306OLED * Improve internal processing of process_record_kb() * Use the return value of process_record_gfx() * Move a include statement into #ifdef block Move #include "ssd1306.h` statement into #ifdef block * Move process_record_kbI() Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c * Move process_record_kb() * modify quantum/template/avr/config.h: add rgblight effect configurations * Change hex file permission to 644 from 755 * convert to unix line-endings [skip ci] * The "Practice60" Board, Blue Pill powered (#4407) * Starting point for blue pill based practice60 * Changes * add * try raw bin no botloader * swap back to bootloader version * edit * Remove debug LED flash * Disable JTAG to open up B3 and B4 * Add led backlight support (no breathing yet) * Update matrix for correctness * RGB Underglow working in a very simple state * not as bright * Move to handwired * revert ChibiOS_Test changes * Changes based on PR comments * Address PR comments v2 * Move files * Fixed incorrect link to feature_combo.md in features.md docs file. Was linked to feature_combos.md, but _sidebar.md, _summary.md, and config_options.md all link to feature_combo.md. Assuming that it should not be pluralized. (#4411) * KBDFans KBD67 Support (#4412) * initial commit for kbd67 keyboard * add in a standard matrix * get the correct matrix for layout_all * add a layout_65_ansi LAYOUT macro * get a default keymap in * add caps lock led support * fix formatting of my name in the comments * add QMK Configurator support * turn on bootmagic * Update Practice60 to use MT feature and revise system ticks (#4413) * Update Practice60 to use MT feature and revise system tics * Increase system tick frequency 10,000 instead of 10,000 * converter/ibm_terminal Refactor and Configurator support (#4414) * IBM Terminal converter: layout macro refactor - Renamed KEYMAP to LAYOUT - Renamed KEYMAP_101 to LAYOUT_101 - minor matrix array fixes * IBM Terminal converter: default keymap refactor - Updated layout macro names - Updated to #include QMK_KEYBOARD_H - config.h updated to use #pragma once * IBM Terminal converter: priyadi keymap refactor - Updated layout macro names - Updated to #include QMK_KEYBOARD_H - Removed redundant KC_TRNS and KC_NO defines - config.h updated to use #pragma once * IBM Terminal converter: Configurator support * IBM Terminal converter: readme cleanup Updated markdown formatting. * IBM Terminal converter: readme rename Renamed file to fully lowercase. * Remove duplicate row from Available functions table in i2c_driver doc (#4416) * Refactoring M6-A, M6-B, Zeal60, Zeal65, WT60-A, WT65-A, WT80-A (#4417) * Refactored M6-B to use Zeal60 RGB backlight code * Fixed M6-B LED co-ordinates * Minor changes to RGB config for Zeal65 * Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A * Keyboard: Add 412 64 Model 00 keyboard. (#4400) * Add 412-64 keyboard firmware It's pretty barebones for now, but the Model 00 is also a pretty barebones machine. Model 01 won't be better, but plenty of pins exist for things like LEDs on Model 02. * MANU/PROD ID changes. Changed around the MANUFACTURER and PRODUCT IDs to be more polite when viewed in qmk toolbox. * Fixing PROD again. For the love of all that is good and holy, that was ugly. This new one looks better. This stuff matters to me for some reason. * Yep, updating MANU again. There we go. That's better - From my name to my "design firm". * Update keyboards/412_64/keymaps/default/keymap.c Co-Authored-By: FateEverywhere <[email protected]> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <[email protected]> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <[email protected]> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <[email protected]> * Update keyboards/412_64/rules.mk Co-Authored-By: FateEverywhere <[email protected]> * Docs: Fix descriptions of KC_INT1 and KC_INT3 * converter/m0110_usb Configurator support and readme cleanup (#4421) * Apple M0110 USB converter: readme cleanup * Apple M0110 USB converter: Configurator support * Keymap: Finex Redox keymap (#4418) * Added FiNeX custom Redox Layout, first commit. * updated readme * removed old code * Fixed Unicode Support heading (#4425) Previously, Unicode Support heading appeared as the last row in the Swap Hands table. * Backlight status functions (#4259) * add functions to set specific backlight state * add function to query backlight state * update documentation with new backlight functions * Update tmk_core/common/backlight.c Co-Authored-By: codyd51 <[email protected]> * Update tmk_core/common/backlight.h Co-Authored-By: codyd51 <[email protected]> * update docs for is_backlight_enabled() name change * adding block def to ishtob's userspace (#4427) * Docs: Supporting a keyboard in the QMK Configurator (#4396) * Docs: Configurator Support * Minor updates * Updated keyboard.h example to use #pragma once per @drashna https://github.com/qmk/qmk_firmware/pull/4396#discussion_r232140934 * Add link to doc under Reference section Added to _sidebar.md and _summary.md * Changed doc title; minor tweaks Re-titled the doc as "Supporting Your Keyboard in QMK Configurator". Made some minor changes to the keyboard.h examples. * Added tags object to JSON example * serial.c update (#4423) * Configurator support for Octagon V2 75_ansi (#4426) * Use a single endpoint for HID reports (#3951) * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format * Add configurator support for luddite (#4434) * Unify 68keys with mf68 (#4435) * Move 68keys keymap to mf68 folder * Remove 68keys keyboard now its been migrated to mf68 keymap * Migrate 68keys build config to mf68 keymap overrides * Update whitefox/konstantin keymap (#4436) * Add more spacing in keymaps * Enable link-time optimization * Disable deprecated TMK actions, change spacing in config.h * Remove unrelated rules.mk options * Moved ep40 to ep/40 for easier adding of next ep keyboard (#4439) * add initial ep40 files * fixed issues * updated keymap * Added media control * Update keyboards/handwired/ep40/rules.mk Co-Authored-By: e11i0t23 <[email protected]> * Fixed requested changes * Fixed more requested changes * Added delete key to layor 1 * Updated defualt keympap to have a Backspace mod del key * removed place holder Co-Authored-By: e11i0t23 <[email protected]> * removed obsolete code Co-Authored-By: e11i0t23 <[email protected]> * Moved ep40 to ep/40 * Fixed file names for moved code * Fixed readme * Updating Boy_314's XD75 Layout (#4440) * fixed arrow keys and left control * added right shift * latest version * reverted arrow keys * edited readme * added osu layer * updated osu layout * updated osu layout * added full arrow keys to osu layout * in case i mess up creating macros * added the best meme key in the world * added plover steno layer * updated boy314 layout * removed unused layers * added boy314 xd75 layout, inspired by preonic layout * added boy314 xd75 layout, inspired by preonic layout * version 2 of boy314's xd75 layout * added readme notes * updated readme for boy314 xd75 layout * qwerty support, brackets on bottom row, caps lock underglow * fixed readme/ * small changes to allow merging * minor changes to format * fixed up default readme * added numpad and tweaked bottom row * Update to my keymaps and userspace (#4447) * fix to prime o keymap * changed ortho keymaps * added some symbols to lower layer * set lower to be a higher layer than raise * added split layout option with center numpad to prime_o keymap * added some gaming functionality * added alt f4 ortho keymaps and userspace * fixed small error * Default JIS TKL keymap for Pegasus Hoof (#4446) * Add TKL JIS layout for Pegasus Hoof Tested with a JIS Majestouch 2 TKL * Add default_jis keymap for Pegasus Hoof * Remove unnecessary keycode definition * Remove legacy fn_actions in favor of MO(1) * Remove unnecessary build directive * Add personal zvecr dz60 keymap (#4443) * Add Configurator support for dz60 ansi split space * Add keymap and fix layout macro * Satan: add LAYOUT_60_ansi_split_rshift to info.json (#4441) * Allows disabling rgb effects in userspace (#4422) * Allows disabling animations in user space * Describe disabling effects in the docs * Allows disabling individual reactive modes * Adds the list ode defines * Make Ergodox EZ Glow's rgb matrix user configurable * Fix i2c_master.d listed more than once warning * Add default glow board * Fix my community layouts (#4449) * fix formatting of keymap * update readme with boards I currently own * made the wrong assumption that every board would use the same space for backspace * update readme with boards I currently own * Delete readme.md * Fix permanently on capslock led on Atom47 (#4452) * Fix UCIS code Revert code change that broke UCIS due to bad suggestions * Adaptive debounce logic The debounce filtering reports a key/switch change directly, without any extra delay. After that the debounce logic will filter all further changes, until the key/switch reports the same state for the given count of scans. So a perfect switch will get a short debounce period and a bad key will get a much longer debounce period. The result is an adaptive debouncing period for each switch. This value defines how often the same key/switch state has to be detected in successive reads until the next key state can be reported. In other words this value defines the minimum debouncing period for a switch. * Update Levinson readme to support elite-c (#4445) * init - updated levinson readme to support elite-c * updated readme per PR comment * added trailing spaces to lines 6 7 8 * updated readme bootloader instructions * updated readme * updated readme * Keyboard: Add Handwired 108 Key with Trackpoint (#4448) * Include both base keyboards * Merge the keymap * Merge the configs * Add wiring diagram for clarity of documentation * Merge rules * Merge keyboard sources * Change names to compile * Update documentation to suit * Add qwerty layout to 108keyTrackpoint * Separate the dvorak standard layout from a media focused one * Update documentation to reflect new keymaps * [style] Add empty lines at ends of files * [style] Meet current QMK style guide * Bring READEME closer to the QMK template * [style] Change all "108keyTrackpoint" to "108key_trackpoint" * [style] Use "LAYOUT" instead of "KEYMAP" QMK terminology has changed Co-Authored-By: mkem114 <[email protected]> * Add two spaces after maintainer in README This is required to render properly Co-Authored-By: mkem114 <[email protected]> * Remove redundant line "PREVENT_STUCK_MODIFIERS" is default on for QMK Co-Authored-By: mkem114 <[email protected]> * Change include of keymaps to use QMK_KEYBOARD_H This includes automatically * Update make rules to match template * Change from KC_MENU to KC_APP The button functionality actually wanted is the context menu key * [style] Change "dvorakMedia" to "dvorak_media" * Update README to reflect minor changes * Fix row 11 * Keymap: Update keymap to match latest changes to Wilba's firmware. (#4432) * Fix firmware to work with latest Wilba changes (i.e. dynamic keymap) and M60a. * Get back RGB Backlight codes. * More tweaks. * Update users/talljoe/rules.mk Co-Authored-By: Talljoe <[email protected]> * Fix raw hid define for chibios (#4460) * Keymap: Clone layout for Massdrop's xd75 (#4461) * Added default75. No lighting. * Added default75. No lighting. * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Update keyboards/idobo/keymaps/default75/config.h Co-Authored-By: griffinmilton3 <[email protected]> * Fixes for pull request * Updated keyboard declartion structure * ergodox: update algernon's layout to v1.12 This is the final version of my layout. Overall changes =============== * Updated to work with QMK master. Miscellaneous ============= * The `😂` symbol can be entered with UCIS. * `LEAD r` now inputs `Right Alt`. Signed-off-by: Gergely Nagy <[email protected]> * Add EEPROM_RESET keycode to keycodes.md doc (#4473) * Add RCTL to my Planck layout (#4475) * Adding my new keymap for the Idobo (#4468) * Adding my new keymap, based of xd75, with leds enabled via the rules.mk file * cleaned up the rules file * Per Change Requests: removed deprecated functions along with updated the map to use the layout macro instead of raw matrix * fix diffutils arch package name (#4470) * Adding keymap layers for 40precentclub/foobar (#4481) * Keymap FAQ: fix positions of KC_HENK and KC_MHEN for JIS layout (#4482) These keys were previously in each other's positions. * Add Espectro ISO layout (#4479) * Add Espectro ISO layout * Remove unused define from Espectro ISO layout * added ep/96 as a supported keyboard (#4476) * added ep/96 * Update keyboards/ep/96/readme.md Co-Authored-By: e11i0t23 <[email protected]> * removed led code * Update keyboards/ep/96/config.h Co-Authored-By: e11i0t23 <[email protected]> * Update keyboards/ep/96/info.json Co-Authored-By: e11i0t23 <[email protected]> * Update keyboards/ep/96/readme.md Co-Authored-By: e11i0t23 <[email protected]> * Fix Blockey compiler (and size) issues (#4390) * Keymap: add Interrobang (#4420) * remove clmk and dvrk and backlight; switch esc and enter to be modtap; add meh key * change songs * space cadet; move enter; move '"; move pgup pgdn * remove extra songs * update from noahfredrick keymap * make it easier to type ../../thing/*/* * move pipe * requested changes * add interrobang support * add shift-insert to raise-v and lower-v, move pipe to raise-/lower-n * Keyboard: 40percentclub - enable 4x4 and 5x5 community keymaps (#4437) * Enable 4x4 and 5x5 community keymap support * Pull 4x4 community keymap fixes from @noroadsleft * Build fixes for guidoism keymap - move keymap to layouts/community/planck_mit as it uses the LAYOUT_planck_mit macro * Keymap: Refactor edvorakjp user library (#4480) * Refactor edvorakjp user library * add tap dance support * update keymaps * edvorakjp: add SWAP_SCLN option * fix behavior of SWAP_SCLN * Keyboard: 5291 firmware to replace the existing soarers controller firmware (#4483) * compiles but is not working * still testing 5291 * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * compiles but is not working * still testing 5291 * fixed a but in the layout (reversed key order in row) * fixed some issues * doumentation needed * doumentation needed * documentation needed * documentation needed * Update readme.md documentation * Update readme.md i dislike markdown <_> * merge preperation * Keyboard: add generic ortho 5x15 layout support to Idobo (#4486) * Add support for PR and Issue templates to QMK_firmware GitHub (#4491) * Add support document * Add Bug Report * Add GitHub Pull Request Template * Feature request issue template * Touch up feature request template * Add 'other issues' template * move support doc * Revert "Add support for PR and Issue templates to QMK_firmware GitHub (#4491)" (#4492) This reverts commit b91dfa04e3bad560fb6fe2360dd51fb95d95fcbf. * Keyboard: Enable community ortho 4x12 layouts for lets split eh (#4487) * Enable ortho_4x12 community layouts for lets_split_eh * Keymap build fixes now that ortho_4x12 is enabled * Keymap build fixes now that ortho_4x12 is enabled * Update to drashna userspace and keymaps (#4459) * Fix reversed bool check in layer_state_set * Add Quefrency 65 for a friend * Add Ergodox EZ Glow keymap * Add RGB Matrix Code * Further changes to rgb matrix ErgoDox EZ * Update bjohnson keymaps * Fix CRKBD display * Overhaul to corne keyboard * Narrow scope for keylogger * Minor layout tweaks to Corne Keyboard * additional CRKBD tweaks * Minor tweaks to CRKBD * Add all characters for keylogger * Ergodox EZ Glow overhaul * Fix Ergodox EZ Glow layer colors * Increase Tapping Term for Corne Keyboard * Fix unicode-ish * Revert some changes * Add layer specific lighting effects * Some minor tweaks to ergodox glow config * revert changes to ergodox files * Update Glow readme * Add more tapping term defines * Fix changes * Fix ergodox keymap * Hopefully fix sleeping * Disable layer indications if rgb matrix is disabled * Add support for sleeping and rgb layer change toggle to ergodox ez glow * Make RGB Layer Indication Great Again * Make Unicode Great Again * Remove placeholder define Co-Authored-By: drashna <[email protected]> * Remove placeholder define Co-Authored-By: drashna <[email protected]> * Remove old EEPROM Reset keycode * Keymap: Fix build errors for non-Zeal boards. (#4496) * handwired/arrow_pad Refactor and Configurator support (#4498) * handwired/arrow_pad: layout macro and keymap refactor - Layout macros moved from the keymaps to arrow_pad.h. - LAYOUT_pad21 refactored to only accept keys that are physical present (no KC_NO entries required in keymap) - Keymaps now use #include QMK_KEYBOARD_H - Keymaps refactored to use process_record_user function (from action_get_macro) * handwired/arrow_pad: Readme cleanup Fixed the make commands and updated the layout macro. * handwired/arrow_pad: Configurator support * Fix Helix ws2812.c listed more than once warning. (#4499) Remove `SRC += ws2812.c` from helix/rev2/rules.mk and helix/pico/rules.mk. Because it will be added in common_features.mk. * Keymap: Set serial connection as default for the Redox rev1.0 keyboard (#4488) * Set serial as default for Redox * Updated rules.mk file * Removed unused rule Co-Authored-By: mattdibi <[email protected]> * Removed unused rule Co-Authored-By: mattdibi <[email protected]> * Keymap: Added abishalom keymaps (#4495) * Added abishalom keymaps Added personal keymaps for Massdrop Alt and Tada68 * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/config.h Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/rules.mk Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Updated keymaps * Bugfix Tada68 * Update keyboards/tada68/keymaps/abishalom/keymap.c Co-Authored-By: abishalom <[email protected]> * Fixed docs/newbs_testing_debugging.md and tmk_core/common/print.h * Puck Macropad (#4274) * Add Puck * Update Manufacturer name in metadata * Add num lock to high layer * update pins * update pin settings * fix numlock key * Cleanup config.h * Update device info * updates after review * Update MSYS to use the 5.4.0 toolchain (#4106) * Ergodox EZ: Remove Unused Code From Keymap * Ergodox EZ: Clean Up process_record_user Function Set ERPM = SAFE_RANGE * Add tap_code16 function (#4362) * Keyboard: fix for debug crkbd (#4469) * fixed misplaced paranthesis in arm usb mouse send function (#4478) bug was causing lots of dropped events for me. * Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319) * Turn off Mousekeys for several ps2avrGB keyboards (#4502) * Turn off Mousekeys for jc65 * Turn off Mousekeys for ps2avrGB templates * Disable mousekeys for bmini and canoe as well * [fortitude60] match default keymap comment to the implementation. (#4508) * Added Rick Roll to song lists (#4510) 🙂 * Add Extrakey support for Brightness up/down (#4477) * Keyboard: handwired/bluepill Configurator support and readme cleanup (#4509) * handwired/bluepill/bluepill70: Configurator support * handwired/bluepill: readme cleanup Formatting fixes to make the file easier to read. * Keyboard: add newgame (#4466) * Add files via upload * Add files via upload * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/newgame40.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/keymaps/default/keymap.c Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/config.h Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Add readme (newgame40) * Update keyboards/newgame40/readme.md Co-Authored-By: GoTakigawa <[email protected]> * Update keyboards/newgame40/readme.md Co-Authored-By: GoTakigawa <[email protected]> * Update keymap.c * Update keyboards/newgame40/rules.mk Co-Authored-By: GoTakigawa <[email protected]> * Add files via upload * remove community/ortho_4x10 * Typo fix (#4515) * New Keyboard: Cyclops (#4512) * initial commit * add correct atmega32u4 pins used * add a basic layout * add simple keymap * update readme * Add QMK Configurator support * add whitespace for formatting * Test out i18n of the docs (#4519) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * Added macros to Dynamic Keymaps, Zeal60 RGB backlight improvements (#4520) * Refactored M6-B to use Zeal60 RGB backlight code * Fixed M6-B LED co-ordinates * Minor changes to RGB config for Zeal65 * Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A * Macro implementation * Implemented macros, API protocol version 8, RGB backlight fixes * Improved radial effects for M6-B * Fixed undefined references when building an RGB keyboard after M6-A * Planck: Align Keycode Columns (#4523) Remove Extra Newlines * Add a layout to support tsangan bottom row with split bs and rshift (#4521) * Add a layout to support tsangan bottom row with split bs and rshift * Move the new layout to defaults * Rename layout to be more accurately representative * Rename files to match renamed layout def * Add tap_random_base64 and software timer info to Useful Functions doc (#4360) * Update docs * Add security caveat Co-Authored-By: drashna <[email protected]> * Wordsmithing Co-Authored-By: drashna <[email protected]> * Update docs/ref_functions.md Co-Authored-By: drashna <[email protected]> * Add support for S7 Elephant (#4511) * Add support for S7 Elephant A high-end 70% custom keyboard designed and produced by jacky from Geekhack. * Polish S7 Elephant code Implement drashna's suggestions: - specify bootloader - remove unnecessary defines - use led_set_user() for LED logic * Correct info.json and s7_elephant.h Correct info.json and s7_elepant.h to follow QMK convention and fix a missing curly bracket. * handwired/ortho5x13 default keymap refactor, Configurator support, and readme update (#4525) * handwired/ortho5x13: default keymap refactor - keymap now uses LAYOUT macro - keymap now uses #include QMK_KEYBOARD_H - removed redundant KC_TRNS and KC_NO definitions * handwired/ortho5x13: Configurator support * handwired/ortho5x13: fix Docs links in readme * handwired/promethium Refactor and Configurator support (#4524) * handwired/promethium: refactor - config.h files - updated to use #pragma once - removed redundant config.h includes - layout macro moved from config.h to promethium.h - layout macro renamed from KEYMAP_CUSTOM to LAYOUT * handwired/promethium: Configurator support * Keyboard: Add HHKB layout support to the DO60 (#4526) * add 60_hhkb support * add qmk configurator support for the new 60_hhkb layout * allow community layout support for the 60_hhkb * fixup readme to adhere to new QMK standards * Keyboard: Enable Lights by Default for Kira 75 (#4527) * enable rgb underglow and backlights by default for use with QMK Configurator * disable mousekeys * Keyboard: handwired/atreus50 Refactor, Configurator support, and readme cleanup (#4530) * handwired/atreus50: refactor - layout macro renames: - KEYMAP is now LAYOUT - COMPACT_KEYMAP is now LAYOUT_kc - keymap updates: - both keymaps now use #include QMK_KEYBOARD_H - removed redundant KC_TRNS and KC_NO definitions - default keymap now uses LAYOUT macro instead of LAYOUT_kc * handwired/atreus50: readme cleanup Reformatted the readme to be more closely aligned to current QMK template, and fixed some typos/grammar. * handwired/atreus50: Configurator support * Second try at configuring i18n for docsify and gitbook (#4531) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * add fallback langurages * Create LANGS.md * Rename docs/zh-cn/README.md to docs/zh/README.md * Update LANGS.md * Update index.html * Add sidebar for ZH (#4533) * add zh-cn readme * edit readme * Round 1 of edits - Mandarin translation of QMK products is off, best to use the English name. - Fix some terminology and grammar. * trying re-translating the first paragraph * add fallback langurages * Create LANGS.md * Rename docs/zh-cn/README.md to docs/zh/README.md * Update LANGS.md * Update index.html * Delete README.md * add sidebar for zh * Add edvorakjp kepmap for crkbd (#4537) * edvorakjp layout for crkbd * bugfix of edvorakjp QMK cannot send keycode that doesn't exists on new layer. * Fix up RGB Matrix code (#4503) * Fix up RGB Matrix code * Convert RGBLIGHT functions to rgbmatrix ones, and add defines * Make ARM Audio max volume configurable (#4540) * Make ARM Audio max volume configurable * Update docs/feature_audio.md Co-Authored-By: drashna <[email protected]> * Update docs/feature_audio.md Co-Authored-By: drashna <[email protected]> * Keymap: Fixed include statement in my Let's Split keymap. (#4543) * keymap + alpha * some fixes * keymap + alpha * some fixes * drashna changes * linked main Alpha repo in keyboards/alpha readme * missed a spot * there's another function called FUNC lol * keymap + alpha * some fixes * keymap + alpha * drashna changes * Fixed include * Revert "Fixed include" This reverts commit ea92f261f86d8433eab313cde498adca1682a006. * messed up my git, fixed include * Keymap: adding my keymap primarily to iris (#4541) * adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <[email protected]> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice * Keymap: Ergodox EZ: Clean Up Keymap Array Alignment (#4545) Remove layer name comments, they are above the visual layout Remove comments explaining things that are documented in qmk docs * Invalid JSON (#4547) * Rework drashna userspace to be more modular (#4544) * Break up files to make more readable * Add comments to ortho 4x12 layout rules.mk * Small tweaks * Update GitLab CI scripts * Make ortho boards smaller * Keyboard: Add new keyboard "Sol" from RGBKB (#4497) * Add final RGBKB Sol firmware * Apply suggestions from code review Apply most of the changes noroadsleft has suggested Co-Authored-By: Legonut <[email protected]> * Cleanup readme * Cleanup keymaps per @noroadslefts suggestions * Remove eeproms, use set_single_persistent_default_layer * Suggestions from @noroadsleft and @drashna some small cleanup * Change RGB_SMOD to RGB_RMOD * fix RGB_SMOD * Apply suggestions from code review Remove redundant lines Co-Authored-By: Legonut <[email protected]> * Keymap: Hacker Dvorak (#4514) * Hacker Dvorak Programmer Dvorak based layout for the Ergodox EZ. * Address drashna comments. * Fix RGB and drop OSL for MO. * Add gulp file to automate development. * Fix gulpfile. * Caps, num and scroll lock indicators. * Fix scroll lock. * Major revisions, focused on streamlining and useability (#4554) * Keyboard: Initial nori port (#4542) * Initial nori port * ortho_4x4 layout and RGB fixes * Review fixes for superseded audio and default layer functionality * Keymap: Wanleg layout updates (#4550) * config fixes (including for issue #3678) * put back audio * jj40 backlighting setup * jj40 backlighting setup * rules.mk fix * jj40 backlighting settings * iris setup * iris setup * iris setup * iris setup * iris setup - onehand * remove commented-out section * edits due to #4403 * xd75 testing * fix 5x15 layout issues with 5x5 bluetooth & xd75 * commenting out unused placeholders * change iris to more wanleg-like 4x12 layout * formatting changes * onehand layout cleanup/fix * revert temp change * Only try to read the report ID from SetReport when the keyboard is part of the shared EP Fixes #4471 Fixes #4517 * Keyboard: Add dz60 tsangan hhkb (#4529) * Add tsangan bottom row hhkb layout for dz60 * Add crd's tsangan hhkb layout for dz60 * Resort to native key aliases when they exist * Update crd's dz60 ansi keymap to match updates for hhkb fn layer * Add tsangan hhkb layout to dz60 info.json for KLE * Fix JSON nesting in dz60 layouts block * Minor adjustments to crd layouts to make them more consistent * Update layout naming to 60_tsangan_hhkb * Keymap: Preonic kuatsure updates 2018-Nov (#4500) * preonic-kuatsure: ctrl / esc in one key + hello ` again * preonic-kuatsure: remove esc on lower * preonic-kuatsure: programmy macros * user-kuatsure: turn off console all the time * preonic-kuatsure: auto shift, but only for numbers * preonic-kuatsure: remove programmery macros * preonic-kuatsure: move braces, parens, etc over to raise backwards compat move &*() on lower * preonic-kuatsure: stop with the full rep of game layer * Keyboard: Updated sixshooter keyboard to move LED macros into the default keymap. (#4428) * Keyboard: Refactor lets split to use split common code (#4536) * Refactor lets split to use split common code * Refactor lets split to use split common code * Build fixes for OLED_sample keymap * Build fixes for OLED_sample keymap - attempt to reduce firmware size * Re-order feature list in sidebar (#4555) Specifically, moved the shifted keycodes to the top of the 'Feature' list, so it's more visible. This way, all of the keycodes are at the top of the list, rather than having the shifted keys at the bottom, so they should be easier to find since they're all in one place. * Changed location of mouse 3, and arrow keys (#4556) * Keyboard: Fixes for superseded audio and default layer functionality (#4557) * Keyboard: Initial i75 port (#4553) * Initial i75 port - currently supporting promicro and teensy2 * Initial i75 port - review fixes * Keymap: Jtcarrasco (#4513) * my XD75 builds for idobo and XD75 these are my xd75 layouts for the 2 versions of the board * clearing of free space spring cleaning * additional cleaning more spring cleaning * removed lighting commands don't need lighting on the idobo board so removal of such commands to keep the sizing down * update for readme.md * Update config.h * commiting with keymap erros on idobo for review * syntax fix for idobo and xd75 revok75, addition of del key switch on fn layer * config edit to config user and keymap QMK_KEYBOARD_H * update to vol controls for both idobo and xd75 for revok75 keymap * filename changes * Keymap: Updated files to work with Planck Rev. 6 (#4552) * Update to work with Planck Rev. 6 Still something that needs to be worked with under keymap.c Qwerty layer tap-toggle function seems to be a little laggy? Not instantaneous * Changes Deleted some unneeded lines * deleting unneeded lines * Keyboard: Configurator support for handwired/dactyl_manuform (#4558) * handwired/dactyl_manuform/4x5: Configurator support * handwired/dactyl_manuform/4x6: Configurator support * handwired/dactyl_manuform/5x6: Configurator support * handwired/dactyl_manuform/5x7: Configurator support * handwired/dactyl_manuform/6x6: Configurator support * Keyboard: handwired/fivethirteen Refactor, Configurator support, and readme cleanup (#4559) * handwired/fivethirteen: refactor - Layout macro KEYMAP renamed to LAYOUT - Default keymap - now uses #include QMK_KEYBOARD_H - Removed redundant KC_TRNS definition - Removed deprecated fn_actions and action_get_macro functions. * handwired/fivethirteen: Configurator support * handwired/fivethirteen: readme cleanup Restructured readme file to be closer to current QMK template. Couldn't find a photo of an assembled fivethirteen, so deleted the reference to the photograph. Renamed to readme.md * Keyboard: Fixing spelling, updating code, finalizing keymap for Dichotomy (#4539) * Fixing spelling, updating code, finalizing keymap for Dichotomy * Fixing requested changes in PR * Further PR-requested changes for convention * Making macros functionable, removing unecessary defs * Fixing keymap to properly use previously-changed macros * Sol rev1 Configurator support (#4562) Adds Configurator support for the Sol rev. 1 by RGBKB. Notes: The Sol keyboard supports split thumb keys like the Ergodox - any of the 2u thumb keys can be split into two 1u keys. The matrix here is configured for fully 1u keys on the thumbs. The Sol also supports installing a rotary encoder on each half. The key matrix given includes the encoders' functions, which are shown in the Configurator as two 1u keys side by side below each half's main key block. The left key of the two (for each side) represents that half's rotary encoder's counter-clockwise function, and the right key is that encoder's clockwise function. * handwired/frenchdev Refactor, Configurator support and readme cleanup (#4561) * handwired/frenchdev: refactor - layout macro KEYMAP renamed to LAYOUT - default keymap - now uses #include QMK_KEYBOARD_H - updated layout macro names * handwired/frenchdev: Configurator support * handwired/frenchdev: readme cleanup Capitalization and markdown formatting fixes. * Allow HS60 to use Community Layouts (#3862) * Add layout support to HS60 * Update Readme for HS60 * Remove defective code * Clean up readme * Fix typo * Delete docs/keycode.txt (#4505) * Vertical animation support for arm_atsam led_matrix (#4538) * Add initial support for vertically-oriented animations * DRY up vertical animation support * Fix animation code for arm_atsam led_matrix to work in all directions * Adjust py calculation to base off bottom rather than top * handwired/gamenum Refactor, Configurator support and readme cleanup (#4563) * handwired/gamenum: refactor - layout macro KEYMAP renamed to LAYOUT - white space changes for alignment - default keymap - now uses #include QMK_KEYBOARD_H - updated layout macro names - white space changes (for readability) * handwired/gamenum: Configurator support * handwired/gamenum: readme cleanup - renamed file to lowercase - updated to match current QMK template more closely - edits to reflect the other changes in this PR * Keyboard: Palm serial keyboard USB converter (#4485) * Initial palm_usb support * removing left over sun .c file * fixing licenses * actually adding updated files * fixing build error * more include cleanup * crd alps64 updates (#4565) * Update alps64 aek layout to work I tried using the layout provided with my alp64 board in AEK configuration, but keys weren't mapping correctly until I made this fix. * Update crd's alps64 aek keymp to match other boards (inspired by mechmerlin) * Fix minor whitespace issue * 1up60hse: Make Keymap Rows Match Keyboard Row Layout (#4564) Remove unused process_record_user function * Add levinson keymap for user 'drogglbecher' (#4566) * Add levinson layout for drogglbecher * Add tab to layer 0 * Change OS key to ALT * Remove unnecessary KC_TRNS define Co-Authored-By: Drogglbecher <[email protected]> * Keymap: adding ishtob's keymap to hadron ver3 (#4570) * Keyboard: handwired/minorca Refactor, Configurator support and readme cleanup (#4571) * handwired/minorca: refactor - Refactored keymaps to use a layout macro, which was added to minorca.h. - keymaps now use QMK_KEYBOARD_H include - removed redundant KC_TRNS and KC_NO definitions - rgb keymap refactor to use QMK core layer switching and Mod-Tap keycodes * handwired/minorca: Configurator support * handwired/minorca: readme cleanup Restructure readme file to current QMK template. * Keymap: Updated keymap with better F positioning (#4463) * added own keymap for planck * Update Readme.md * Update Readme.md * Update Readme.md * Update Readme.md * Update Readme.md * dynamic macros * Update Readme.md * moved the reset button * Update readme for volume explanation * Format * Update Readme.md * Update Readme.md * added safe double shift * changed the modified shift to regular shift, for allowing shift + F keys * moved power stuff to the function layer * del button on raise * Update Readme.md * updated F keys * Update Readme.md * Update Readme.md * moved F keys * fixed conflicts * missed something * moved F11 and F12 * Update layout in the image * Update keyboards/planck/keymaps/dr_notsokind/keymap.c Co-Authored-By: pnikosis <[email protected]> * Apply suggestions from code review Co-Authored-By: pnikosis <[email protected]> * handwired/MS_sculpt_mobile Refactor, Configurator and cleanup (#4576) * handwired/MS_sculpt_mobile: refactor - layout macro KEYMAP renamed to LAYOUT - layout macro MATRIX_TESTING_KEYMAP renamed to MATRIX_TESTING_LAYOUT * handwired/MS_sculpt_mobile: Configurator support * handwired/MS_sculpt_mobile: readme cleanup * handwired/MS_sculpt_mobile: rename folder Renamed the directory to fully lowercase. * handwired/MS_sculpt_mobile: rename keyboard files Renamed the keyboard core files to fully lowercase. * handwired/ms_sculpt_mobile: keymap readme cleanup Capitalization fixes because I'm that guy. * handwired/ms_sculpt_mobile: keymap config.h fixes Keymap config.h files updated to use #pragma once * handwired/ms_sculpt_mobile: updated paths Fixing path references due to rename. * AJP10304 Planck layout, add LAYOUT_planck_grid (#4575) * Removed mousekeys. Added Levinson Steno keymap. (#4574) * Changed location of mouse 3, and arrow keys * Removed MouseKeys. Added Levinson Layout * Add support for PR and Issue templates to QMK_firmware GitHub (#4494) * Add support document * Add Bug Report * Add GitHub Pull Request Template * Feature request issue template * Touch up feature request template * Add 'other issues' template * move support doc * Minor tweaks * More minor tweaks * Spleeling fix Co-Authored-By: drashna <[email protected]> * CapiTALization fIXes Co-Authored-By: drashna <[email protected]> * Use new issue URL Co-Authored-By: drashna <[email protected]> * Add blanck issue template * Update the PR template * Formatting and additional changes * Update docs/support.md Co-Authored-By: drashna <[email protected]> * Add a better Docker build script + update Dockerfile (#4222) * Add a Docker build script * Add usage and error messages * Add -r to reads Thanks mechmerlin * Add keyboard:keymap form, improve script * Add target argument, change usage forms in script * Add check for more than 3 args in keyboard:keymap:target form * Change Docker base image to debian, use community repo This matches what qmk_compiler uses (https://github.com/qmk/qmk_compiler/blob/master/Dockerfile#L1). I've removed the maintainer as we now have a community build on Docker Hub (https://hub.docker.com/r/qmkfm/qmk_firmware). This Dockerfile will also be maintained by the community. * Change build command format to keyboard:keymap * Call make directly in container run command * Simplify script, remove 3-arg form * Add COPY to Dockerfile so images are usable in and of themselves Also change WORKDIR from /qmk to /qmk_firmware * Add USB pass-through for Linux and docker-machine hosts * Read directly into variables instead of array * Alphabetically sort dependencies in Dockerfile * Set executable bit on util/docker_build.sh * Update Docker docs * Add warning about Docker on Windows * Expand comment in docs * Check docker-machine exit code instead of string * Only match --help with whole arguments * Make script POSIX-compliant * Convert script indentation to tabs * Keymap: Modified like-jis keymap for crkbd (#4577) * Keymap: Keymap update (#4579) * Add YREG keycode * Add GM layer * Set tapping term to 105 * update tapping term * Keymap: Fixed a problem with underglow with froggy keymap (#4580) * docs typo (#4584) * Fixed lack of semi colon. (#4587) * handwired/nicekey Refactor and readme cleanup (#4588) * handwired/nicekey: refactor Now uses a layout macro. * handwired/nicekey: readme cleanup - linked maintainer's GitHub account - updated Docs links * handwired/onekey Refactor and readme update (#4590) * handwired/onekey: refactor - keyboard now uses a layout macro - keymap now uses #include QMK_KEYBOARD_H * handwired/onekey: readme update Updated Docs links. * Keyboard: Added RGB toggle and cycle to default KDB6x mapping. (#4592) * Added RGB toggle and cycle to default mapping. This is present on layouts on 'http://qmkeyboard.cn/' but not here. * Added addition keycodes for hue/sat/val. * Bringing Massdrop keyboard hardware configuration to keyboard level (#4593) MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output. * Fix the LFKeyboards so they work with the QMK Configurator (#4591) * Make layer_info weak so it works with QMK Configurator * Fix lfk87 compile issue * Add fixes for lfkpad * adjust install_avr function to use unzip for broader compatibility (#4596) On a laptop with god knows what mandatory security software (Cylance?), running up-to-date Windows 10 with msys2 mingw-64, attempting to install the AVR toolkit results in the following error: ``` 1 [main] 7z (13316) C:\msys32\usr\lib\p7zip\7z.exe: *** fatal error - cygheap base mismatch detected - 0x612A5410/0x2375410. This problem is probably due to using incompatible versions of the cygwin DLL. Search for cygwin1.dll using the Windows Start->Find/Search facility and delete all but the most recent version. The most recent version *should* reside in x:\cygwin\bin, where 'x' is the drive on which you have installed the cygwin distribution. Rebooting is also suggested if you are unable to find another cygwin DLL. ``` This appears to be related in some way, based on my research, to ASLR functionality in security software. Since I'm unable to override whatever is enforcing ASLR on my system, after trying several other approaches (removing other copies of msys-2.0.dll, which is what this is apparently actually referencing, rebasing that file in Windows to address 0x61000000, a few other things) I simply edited the installation shell script to use `unzip` instead of 7zip; `unzip`'s binary does not provoke a mismatch error and the installation proceeds as it should. I'm not aware of the reason why some parts of the install script use `unzip` (e.g. `install_arm`) and others use 7zip, but it seems that for broader compatibility and sparing users on locked down machines the 120 minutes or so of futzing this took me to fix, it might be better to just use `unzip` in all cases. Note: There is another function that uses 7zip, `extract_flip`. The line is `7z -oflip x FlipInstaller.exe`. I'm not sure what this is doing, or whether it's possible to do it with `unzip`, but it produces the same error. I haven't attempted to fix that in this PR, but it might be good to fix it for the same reason. * handwired/pilcrow Refactor, Configurator support and readme update (#4602) * handwired/pilcrow: refactor - layout macro renamed from KEYMAP to LAYOUT - keymap now uses #include QMK_KEYBOARD_H - layers reformatted for readability - removed unused and deprecated fn_actions and action_get_macro blocks - keymap config.h - updated to use #pragma once - removed redundant config.h include * handwired/pilcrow: Configurator support * handwired/pilcrow: readme update Updated readme.md file to use modern template formatting. * Reduce compile size of KBD6x (#4599) Disable some functionality so that it will compile under size in the QMK Configurator * Changing Zeal60/Zeal65 VID/PID to be unique (#4605) * Fix macro docs to be consistent with keyboard template (#4600) * handwired/pteron: Configurator support * handwired/practice60: Configurator Support and refactor (#4603) * handwired/practice60: Configurator Support * handwired/practice60: refactor - layout macro rows did not have an equal number of arguments in all rows of the matrix - white space changes for readability/alignment * Keymap: Dichotomy keymap by alairock (#4608) * dichotemy layout for alairock * dichotemy layout for alairock * complete overhaul * fix suggestions * Keymap: Added Drewsky DZ60 keymap (#4607) * Added Drewsky's DZ60 Keymap * Update keyboards/dz60/keymaps/drewsky/keymap.c Co-Authored-By: Twopidee <[email protected]> * Preonic Configurator update (#4598) * Preonic: refactor layout macros Unify layout macro names across AVR and ARM. - all layouts and matrices have moved/duplicated to their appropriate revisions - preonic.h now includes the appropriate header file from the selected revision - revision header files only contain layouts appropriate for that revision - Previously, all layouts were available in source for all revisions. - removed KEYMAP layout macro alias (was unused) - macros LAYOUT_preonic_1x2uC and LAYOUT_preonic_grid for AVR and ARM revisions - LAYOUT_preonic_grid has alias LAYOUT_ortho_5x12 for all revisions - deleted LAYOUT_ortho_4x12 alias (not appropriate for this keyboard) - ARM-based revisions have 1x2uR, 1x2uL and 2x2u matrices * Preonic: updated revision headers to #pragma once * Preonic: update Configurator files Updated the Configurator files to reflect the previous changes in this branch. - Preonic revs. 1 and 2 will use keyboards/preonic/info.json - Preonic rev. 3 will use keyboards/preonic/rev3/info.json - This file will override keyboards/preonic/info.json when preonic/rev3 is selected in the Configurator. * handwired/numpad20 Refactor and Configurator support (#4589) * handwired/numpad20: refactor - layout macro no longer auto-prepends keycodes with KC_ - keymaps for this keyboard will now compile in QMK Configurator - keymap now uses #include QMK_KEYBOARD_H - deleted unused fn_actions code block * handwired/numpad20: Configurator support * Add standard definitions for ALGR and KC_ALGR (#4389) * Add standard ALGR defition, remove (re)definitions from language files * Use ALGR(kc) consistently in ALTGR(kc) aliases * Non-Nordic keymaps should not use NO_ALGR * Add standard KC_ALGR definition * Update docs with ALGR and KC_ALGR * Update SS_ALGR and ALGR_T aliases * S7 Elephant Configurator fixes (#4614) * S7 Elephant: Configurator bugfix, part 1 Refor…
rseymour
pushed a commit
to rseymour/qmk_firmware
that referenced
this pull request
Mar 13, 2019
…4482) These keys were previously in each other's positions.
djthread
pushed a commit
to djthread/qmk_firmware
that referenced
this pull request
Mar 17, 2019
…4482) These keys were previously in each other's positions.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
These keys were previously in each other's positions.
According to the OADG 109A spec for JIS-layout keyboards,
KC_MHENis to the left of the spacebar, andKC_HENKto the right.