Add Sinc Rev. 3

keyboards/keebio/sinc/info.json

@@ -5,8 +5,6 @@
     "usb": {
         "vid": "0xCB10"
     },
-    "processor": "atmega32u4",
-    "bootloader": "atmel-dfu",
     "features": {
         "audio": false,
         "bootmagic": true,

keyboards/keebio/sinc/keymaps/via/keymap.c

@@ -37,3 +37,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______
   )
 };
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+	[0] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD), ENCODER_CCW_CW(KC_PGUP, KC_PGDN) },
+	[1] = { ENCODER_CCW_CW(RGB_MOD, RGB_RMOD), ENCODER_CCW_CW(KC_MNXT, KC_MPRV) },
+	[2] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) },
+	[3] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______) },
+};
+#endif

keyboards/keebio/sinc/keymaps/via/rules.mk

@@ -1,2 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
+ENCODER_MAP_ENABLE = yes

keyboards/keebio/sinc/config.h → keyboards/keebio/sinc/rev1/config.h

@@ -31,3 +31,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Set right column, left macro, 1.75u shift, split spaces, and 5x1u on by default
 #define VIA_EEPROM_LAYOUT_OPTIONS_DEFAULT 0x00DE
 #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/keebio/sinc/rev1/info.json

@@ -4,6 +4,8 @@
         "pid": "0x1267",
         "device_version": "1.0.0"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "debounce": 5,
     "diode_direction": "COL2ROW",
     "features": {
@@ -51,7 +53,16 @@
         "led_count" : 16,
         "split_count": [8, 8],
         "animations": {
-            "all": true,
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
         }
     }
 }

keyboards/keebio/sinc/rev2/config.h

@@ -0,0 +1,34 @@
+/* Copyright 2021 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// wiring of each half
+#define SPLIT_HAND_PIN F7
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
+#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
+
+// Set right column, left macro, 1.75u shift, split spaces, and 5x1u on by default
+#define VIA_EEPROM_LAYOUT_OPTIONS_DEFAULT 0x00DE
+#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/keebio/sinc/rev2/info.json

@@ -4,6 +4,8 @@
         "pid": "0x2267",
         "device_version": "2.0.0"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "debounce": 5,
     "diode_direction": "COL2ROW",
     "features": {
@@ -51,7 +53,16 @@
         "led_count" : 16,
         "split_count": [8, 8],
         "animations": {
-            "all": true,
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
         }
     }
 }

keyboards/keebio/sinc/rev3/config.h

@@ -0,0 +1,78 @@
+/* Copyright 2022 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define SPLIT_HAND_PIN GP4
+#define SERIAL_USART_FULL_DUPLEX
+#define SERIAL_USART_TX_PIN GP0
+#define SERIAL_USART_RX_PIN GP1
+#define SERIAL_USART_PIN_SWAP
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
+#define I2C_DRIVER I2CD2
+#define I2C1_SCL_PIN GP22
+#define I2C1_SDA_PIN GP23
+
+#define RGBLIGHT_DEFAULT_VAL 120
+#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
+// RGB Matrix
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
+#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define DRIVER_LED_TOTAL RGBLED_NUM
+#define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+#define SPLIT_TRANSPORT_MIRROR

keyboards/keebio/sinc/rev3/halconf.h

@@ -0,0 +1,21 @@
+/* Copyright 2022 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next "halconf.h"