[Keyboard] Add keebformom ortho 4x10

keyboards/keebformom/config.h

@@ -0,0 +1,101 @@
+/* Copyright 2022 Sandipratama <https://github.com/nendezkombet>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x458F
+#define PRODUCT_ID   0x14E2
+#define DEVICE_VER   0x0001
+#define MANUFACTURER nendezkombet/sandipratama
+#define PRODUCT      Keeb For Mom
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+/* KFM PCB default pin-out */
+#define MATRIX_ROW_PINS { F5, F6, F7, B1 }
+#define MATRIX_COL_PINS { B3, B2, D1, D0, D4, C6, D7, E6, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN F4
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define TAPPING_TERM 200
+
+/* disable these deprecated features by default */
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+

keyboards/keebformom/info.json

@@ -0,0 +1,52 @@
+{
+    "keyboard_name": "Keeb For Mom",
+    "url": "",
+    "maintainer": "qmk",
+    "layouts": {
+        "LAYOUT_ortho_4x10": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3},
+                {"x":5, "y":3},
+                {"x":6, "y":3},
+                {"x":7, "y":3},
+                {"x":8, "y":3},
+                {"x":9, "y":3}
+
+            ]
+        }
+    }
+}

keyboards/keebformom/keebformom.c

@@ -0,0 +1,17 @@
+/* Copyright 2022 Sandipratama <https://github.com/nendezkombet>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "keebformom.h"

keyboards/keebformom/keebformom.h

@@ -0,0 +1,40 @@
+/* Copyright 2022 Sandipratama <https://github.com/nendezkombet>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_4x10( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09,   \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19,   \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29,   \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39    \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09,  }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19,  }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29,  }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39   }  \
+}

keyboards/keebformom/keymaps/default/config.h

@@ -0,0 +1,29 @@
+/* Copyright 2022 Sandipratama <https://github.com/nendezkombet>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#ifdef AUDIO_ENABLE
+#define AUDIO_PIN B6     
+#define NO_MUSIC_MODE   
+#define STARTUP_SONG SONG(MAJOR_SOUND)                    
+#endif
+
+#define COMBO_COUNT 8
+#define MIDI_ADVANCED
+