Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fix small docs typo #17254

Merged
merged 1 commit into from
May 30, 2022
Merged

Fix small docs typo #17254

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion docs/flashing.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -266,7 +266,7 @@ Flashing sequence:
### `make` Targets

* `:dfu-util`: Waits until an STM32 bootloader device is available, and then flashes the firmware.
* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:avrdude`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:dfu-util`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
* `:st-link-cli`: Allows you to flash the firmware via the ST-Link CLI utility, rather than dfu-util. Requires an ST-Link dongle.
* `:st-flash`: Allows you to flash the firmware via the `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink), rather than dfu-util. Requires an ST-Link dongle.

Expand Down
2 changes: 1 addition & 1 deletion docs/zh-cn/flashing.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -252,7 +252,7 @@ BOOTLOADER = stm32-dfu
### `make` 构建目标

* `:dfu-util`: 每5秒检测一次直到发现可用的STM32 bootloader设备，然后进行固件刷写。
* `:dfu-util-split-left` 和 `:dfu-util-split-right`: 同 `:avrdude` 一样会刷写固件，但额外地会设置手性设置到EEPROM中，对于基于Proton-C的分体式键盘这是理想的方法。
* `:dfu-util-split-left` 和 `:dfu-util-split-right`: 同 `:dfu-util` 一样会刷写固件，但额外地会设置手性设置到EEPROM中，对于基于Proton-C的分体式键盘这是理想的方法。
* `:st-link-cli`: 通过ST-Link CLI工具集而非dfu-util进行刷写，需要有ST-Link电子狗。
* `:st-flash`: 通过[STLink工具](https://github.com/stlink-org/stlink)内的 `st-flash` 工具而非dfu-util进行刷写，需要有ST-Link电子狗。

Expand Down