Move to organization folder

keyboards/bat43/bat43.h → keyboards/dailycraft/bat43/bat43.h

@@ -1,9 +1,9 @@
 #pragma once
 
-#ifdef KEYBOARD_bat43_rev1
+#ifdef KEYBOARD_dailycraft_bat43_rev1
     #include "rev1.h"
 #endif
-#ifdef KEYBOARD_bat43_rev2
+#ifdef KEYBOARD_dailycraft_bat43_rev2
     #include "rev2.h"
 #endif
 

keyboards/bat43/readme.md → keyboards/dailycraft/bat43/readme.md

@@ -6,10 +6,21 @@ A 43-key keyboard.
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: bat43 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make bat43:default
+    make dailycraft/bat43:default
+
+Flashing example for this keyboard:
+
+    make dailycraft/bat43:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/bat43/rules.mk → keyboards/dailycraft/bat43/rules.mk

@@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
-DEFAULT_FOLDER = bat43/rev2
+DEFAULT_FOLDER = dailycraft/bat43/rev2

keyboards/claw44/claw44.h → keyboards/dailycraft/claw44/claw44.h

@@ -1,5 +1,5 @@
 #pragma once
 
-#ifdef KEYBOARD_claw44_rev1
+#ifdef KEYBOARD_dailycraft_claw44_rev1
   #include "rev1.h"
 #endif

keyboards/claw44/readme.md → keyboards/dailycraft/claw44/readme.md

@@ -4,12 +4,23 @@
 
 A split keyboard with 3x6 vertically staggered keys and 4 thumb keys.
 
-Keyboard Maintainer: [@yfuku_](https://twitter.com/yfuku_)  
-Hardware Supported: Claw44 PCB, ProMicro  
-Hardware Availability: https://yfuku.booth.pm/  
+* Keyboard Maintainer: [yfuku](https://github.com/yfuku)
+* Hardware Supported: Claw44 PCB, ProMicro
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make claw44:default
+    make dailycraft/claw44:default
+
+Flashing example for this keyboard:
+
+    make dailycraft/claw44:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/claw44/rules.mk → keyboards/dailycraft/claw44/rules.mk

@@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 
-DEFAULT_FOLDER = claw44/rev1
+DEFAULT_FOLDER = dailycraft/claw44/rev1

keyboards/owl8/readme.md → keyboards/dailycraft/owl8/readme.md

@@ -6,14 +6,21 @@ macropad
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: owl8 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make owl8:default
+    make dailycraft/owl8:default
 
 Flashing example for this keyboard:
 
-    make owl8:default:flash
+    make dailycraft/owl8:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/wings42/rev1/readme.md → keyboards/dailycraft/wings42/readme.md

@@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: wings42 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make wings42/rev1:default
+    make dailycraft/wings42:default
 
 Flashing example for this keyboard:
 
-    make wings42/rev1:default:flash
+    make dailycraft/wings42:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/)
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/wings42/rev2/readme.md → keyboards/dailycraft/wings42/rev1/readme.md

@@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: wings42 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make wings42:default
+    make dailycraft/wings42/rev1:default
 
 Flashing example for this keyboard:
 
-    make wings42:default:flash
+    make dailycraft/wings42/rev1:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/)
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/wings42/readme.md → keyboards/dailycraft/wings42/rev1_extkeys/readme.md

@@ -6,14 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: wings42 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make wings42:default
+    make dailycraft/wings42/rev1_extkeys:default
 
 Flashing example for this keyboard:
 
-    make wings42:default:flash
+    make dailycraft/wings42/rev1_extkeys:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/wings42/rev1_extkeys/readme.md → keyboards/dailycraft/wings42/rev2/readme.md

@@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.
 
 * Keyboard Maintainer: [yfuku](https://github.com/yfuku)
 * Hardware Supported: wings42 PCB, Pro Micro
-* Hardware Availability: https://yfuku.booth.pm/
+* Hardware Availability: https://shop.dailycraft.jp/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make make wings42/rev1_extkeys:default
+    make dailycraft/wings42:default
 
 Flashing example for this keyboard:
 
-    make make wings42/rev1_extkeys:default:flash
+    make dailycraft/wings42:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/)
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/wings42/rules.mk → keyboards/dailycraft/wings42/rules.mk

@@ -19,4 +19,4 @@ AUDIO_ENABLE = no           # Audio output
 
 SPLIT_KEYBOARD = yes
 
-DEFAULT_FOLDER = wings42/rev2
+DEFAULT_FOLDER = dailycraft/wings42/rev2

keyboards/wings42/wings42.h → keyboards/dailycraft/wings42/wings42.h

@@ -18,13 +18,13 @@
 
 #include "quantum.h"
 
-#ifdef KEYBOARD_wings42_rev1
+#ifdef KEYBOARD_dailycraft_wings42_rev1
 #    include "rev1.h"
 #endif
-#ifdef KEYBOARD_wings42_rev1_extkeys
+#ifdef KEYBOARD_dailycraft_wings42_rev1_extkeys
 #    include "rev1_extkeys.h"
 #endif
-#ifdef KEYBOARD_wings42_rev2
+#ifdef KEYBOARD_dailycraft_wings42_rev2
 #    include "rev2.h"
 #endif