Make default layer size 16-bit

docs/zh-cn/custom_quantum_functions.md

@@ -240,7 +240,7 @@ void suspend_wakeup_init_user(void) {
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (biton32(state)) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         rgblight_setrgb (0x00,  0x00, 0xFF);
         break;
@@ -267,7 +267,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
 
 ### `layer_state_set_*` 函数文档
 
-* 键盘/各子版本：`uint32_t layer_state_set_kb(uint32_t state)`
+* 键盘/各子版本：`layer_state_t layer_state_set_kb(layer_state_t state)`
 * 布局: `layer_state_t layer_state_set_user(layer_state_t state)`
 
 
@@ -325,7 +325,7 @@ void keyboard_post_init_user(void) {
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (biton32(state)) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
         if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); }
         break;
@@ -474,4 +474,3 @@ cancel_deferred_exec(my_token);
 ```c
 #define MAX_DEFERRED_EXECUTORS 16
 ```
-

keyboards/1upkeyboards/sweet16/keymaps/ridingintraffic/keymap.c

@@ -196,7 +196,7 @@ void matrix_scan_user(void) {
   }
 }
 layer_state_t layer_state_set_user(layer_state_t state) {
-    switch (biton32(state)) {
+    switch (get_highest_layer(state)) {
     case _TAPLAND:
         rgblight_setrgb(0, 16, 0); //green
         break;

keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c

@@ -105,7 +105,7 @@ void matrix_scan_user(void) {
   #ifdef RGBLIGHT_ENABLE
 
   static uint8_t old_layer = 255;
-  uint8_t new_layer = biton32(layer_state);
+  uint8_t new_layer = get_highest_layer(layer_state);
 
   // Color of the Icons.
   if (old_layer != new_layer) {

keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c

@@ -128,10 +128,10 @@ void tap_dance_choose_layer_reset (qk_tap_dance_state_t *state, void *user_data)
 			layer_off(_RAISE);
 			break;
 		case 3:
-			if (biton32(default_layer_state) == _DVORAK) {
+			if (get_highest_layer(default_layer_state) == _DVORAK) {
 				set_single_persistent_default_layer(_QWERTY);
 			}
-			else if (biton32(default_layer_state) == _QWERTY) {
+			else if (get_highest_layer(default_layer_state) == _QWERTY) {
 				set_single_persistent_default_layer(_DVORAK);
 			}
 			break;

keyboards/bandominedoni/keymaps/led/keymap.c

@@ -180,7 +180,7 @@ void keyboard_post_init_user(void) {
 #ifdef RGB_MATRIX_ENABLE
 void rgb_matrix_indicators_user(void) {
     if (rgb_matrix_is_enabled()) {  // turn the lights on when it is enabled.
-        uint8_t layer = biton32(layer_state);
+        uint8_t layer = get_highest_layer(layer_state);
         switch (layer) {
             case _CLOSE:
                 // rgb_matrix_set_color(pgm_read_byte(&convert_led_location2number[11]),  RGB_RED);         //  RGB_TOG  <- too heavy.

keyboards/bandominedoni/keymaps/via/keymap.c

@@ -118,7 +118,7 @@ void keyboard_post_init_user(void) {
 #ifdef RGB_MATRIX_ENABLE
 void rgb_matrix_indicators_user(void) {
     if (rgb_matrix_is_enabled()) {  // turn the lights on when it is enabled.
-        uint8_t layer = biton32(layer_state);
+        uint8_t layer = get_highest_layer(layer_state);
         switch (layer) {
             case _CLOSE:
                 // rgb_matrix_set_color(pgm_read_byte(&convert_led_location2number[11]),  RGB_RED);         //  RGB_TOG  <- too heavy.

keyboards/biacco42/ergo42/keymaps/hdbx/keymap.c

@@ -134,7 +134,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 // RGB Underglow使用時のレイヤー毎のカラー切り替え
-uint32_t layer_state_set_keymap (uint32_t state) {
+layer_state_t layer_state_set_keymap (layer_state_t state) {
   return state;
 }
 
@@ -148,7 +148,7 @@ void matrix_init_user(void) {
 layer_state_t layer_state_set_user(layer_state_t state) {
   state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
 #ifdef RGBLIGHT_ENABLE
-    switch (biton32(state)) {
+    switch (get_highest_layer(state)) {
     case _RAISE:
       rgblight_setrgb_chartreuse(); // RAISE:シャルトリューズ
       break;

keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c

@@ -89,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 void matrix_scan_user(void) {
     uint8_t layer;
-    layer = biton32(layer_state);
+    layer = get_highest_layer(layer_state);
 
     if (current_layer_global != layer) {
         current_layer_global = layer;
@@ -132,7 +132,7 @@ void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     uint8_t layer;
-    layer = biton32(layer_state);
+    layer = get_highest_layer(layer_state);
     if (layer == PROG2) {
          if (keycode >= KC_A && keycode <= KC_EXSEL && \
              !(  // do not send LSFT + these keycodes, they are needed for emulating the US layout

keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c

@@ -77,7 +77,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 void matrix_scan_user(void)
 {
-	uint8_t layer = biton32(layer_state);
+	uint8_t layer = get_highest_layer(layer_state);
 	switch (layer) {
 		case KM_BLOWRAK:
 			ph_caps_led_on();

keyboards/cannonkeys/ortho75/ortho75.c

@@ -5,47 +5,48 @@
 
 uint8_t layer = 0;
 
-uint32_t layer_state_set_kb(uint32_t state) {
-  state = layer_state_set_user(state);
-  layer = biton32(state);
-  return state;
+layer_state_t layer_state_set_kb(layer_state_t state) {
+    state = layer_state_set_user(state);
+    layer = get_highest_layer(state);
+    return state;
 }
 
 bool encoder_update_kb(uint8_t index, bool clockwise) {
     if (!encoder_update_user(index, clockwise)) return false;
-  uint16_t mapped_code = 0;
-  if (index == 0) {
-    if (clockwise) {
-        switch(layer){
-            case 0:
-            default:
-                mapped_code = KC_VOLU;
-                break;
-            case 1:
-                mapped_code = KC_MEDIA_NEXT_TRACK;
-                break;
-            case 2:
-                mapped_code = KC_PGDN;
-                break;
+    uint16_t mapped_code = 0;
+    if (index == 0) {
+        if (clockwise) {
+            switch (layer) {
+                case 0:
+                default:
+                    mapped_code = KC_VOLU;
+                    break;
+                case 1:
+                    mapped_code = KC_MEDIA_NEXT_TRACK;
+                    break;
+                case 2:
+                    mapped_code = KC_PGDN;
+                    break;
+            }
+        } else {
+            switch (layer) {
+                case 0:
+                default:
+                    mapped_code = KC_VOLD;
+                    break;
+                case 1:
+                    mapped_code = KC_MEDIA_PREV_TRACK;
+                    break;
+                case 2:
+                    mapped_code = KC_PGUP;
+                    break;
+            }
         }
-    } else {
-        switch(layer){
-            case 0:
-            default:
-                mapped_code = KC_VOLD;
-                break;
-            case 1:
-                mapped_code = KC_MEDIA_PREV_TRACK;
-                break;
-            case 2:
-                mapped_code = KC_PGUP;
-                break;
+        uint16_t held_keycode_timer = timer_read();
+        register_code(mapped_code);
+        while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY) { /* no-op */
         }
+        unregister_code(mapped_code);
     }
-    uint16_t held_keycode_timer = timer_read();
-    register_code(mapped_code);
-    while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ }
-    unregister_code(mapped_code);
-  }
-  return true;
+    return true;
 }

keyboards/cannonkeys/satisfaction75/satisfaction75.c

@@ -240,7 +240,7 @@ void read_host_led_state(void) {
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
   state = layer_state_set_user(state);
-  layer = biton32(state);
+  layer = get_highest_layer(state);
   oled_request_wakeup();
   return state;
 }

keyboards/ckeys/washington/keymaps/default/keymap.c

@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 bool encoder_update_user(uint8_t index, bool clockwise) {
-    switch (biton32(layer_state)) {
+    switch (get_highest_layer(layer_state)) {
         case _BASE:
             if (clockwise) {
                 tap_code(KC_VOLU);
@@ -62,7 +62,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 bool oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_P(PSTR("Layer: "), false);
-  switch (biton32(layer_state)) {
+  switch (get_highest_layer(layer_state)) {
     case _BASE:
       oled_write_P(PSTR("Default\n"), false);
       break;

keyboards/clueboard/66/keymaps/magicmonty/keymap.c

@@ -199,7 +199,7 @@ void matrix_scan_user(void) {
 
     if (!rgblight_config.enable || rgblight_config.mode != 1) { return; }
 
-    uint32_t layer = layer_state;
+    layer_state_t layer = layer_state;
     uint8_t val = rgblight_config.val;
 
     if (layer & (1<<_FL)) {

keyboards/crkbd/keymaps/dsanchezseco/keymap.c

@@ -84,7 +84,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
 
 const char *read_logo(void);
 bool oled_task_user(void){
-    switch (biton32(layer_state)){
+    switch (get_highest_layer(layer_state)){
         case _DVORAK:
             oled_write_ln_P(PSTR("DVRK"), false);
             break;

keyboards/crkbd/keymaps/edvorakjp/keymap.c

@@ -54,9 +54,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // clang-format on
 
 #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
-uint32_t layer_state_set_keymap(uint32_t state) {
+layer_state_t layer_state_set_keymap(layer_state_t state) {
     rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
-    switch (biton32(state)) {
+    switch (get_highest_layer(state)) {
         case L_EDVORAKJP_LOWER:
             rgblight_sethsv_noeeprom_red();
             break;

keyboards/crkbd/keymaps/edvorakjp/oled.c

@@ -9,7 +9,7 @@ void render_layer_state(void) {
     char layer_name[17];
     oled_write_P(PSTR("Layer: "), false);
 
-    switch (biton32(layer_state)) {
+    switch (get_highest_layer(layer_state)) {
         case L_EDVORAKJP_BASE:
             oled_write_ln_P(PSTR("Default"), false);
             break;

keyboards/crkbd/keymaps/jarred/keymap.c

@@ -84,7 +84,7 @@ const char *read_keylogs(void);
 char matrix_line_str[24];
 
 const char *read_layer_state(void) {
-  uint8_t layer = biton32(layer_state);
+  uint8_t layer = get_highest_layer(layer_state);
 
   strcpy(matrix_line_str, "Layer: ");
 

keyboards/dichotomy/keymaps/default/keymap.c

@@ -109,7 +109,7 @@ report_mouse_t currentReport = {};
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	//uint8_t layer;
-	//layer = biton32(layer_state);  // get the current layer  //Or don't, I didn't use it.
+	//layer = get_highest_layer(layer_state);  // get the current layer  //Or don't, I didn't use it.
 	bool returnVal = true; //this is to determine if more key processing is needed.
 
 	 //custom layer handling for tri_layer,
@@ -437,7 +437,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 };
 
 void matrix_scan_user(void) {
-	//uint8_t layer = biton32(layer_state);
+	//uint8_t layer = get_highest_layer(layer_state);
 	for (uint8_t i = 0; i<LONGPRESS_COUNT; i++){
 		if ((timer_elapsed(special_timers[i]) >= CUSTOM_LONGPRESS) && (!special_key_states[i]) && special_key_pressed[i]){
 			switch (i + SAFE_RANGE){

keyboards/dm9records/plaid/keymaps/thehalfdeafchef/keymap.c

@@ -129,7 +129,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_laye
 
 // Runs constantly in the background, in a loop.
 void matrix_scan_user(void) {
-    uint8_t layer = biton32(layer_state);
+    uint8_t layer = get_highest_layer(layer_state);
 
     switch (layer) {
         case _LOWER:

keyboards/dz60/keymaps/iso_split-spacebar/keymap.c

@@ -4,12 +4,12 @@
 // thanks to atlacat, hailbreno, itsaferbie and weeheavy...
 
 // and special thanks to  AGausmann and drashna for the layer-activated RGB underglow
-// https://www.reddit.com/r/olkb/comments/6t1vdu/update_layeractivated_rgb_underglow/ 
+// https://www.reddit.com/r/olkb/comments/6t1vdu/update_layeractivated_rgb_underglow/
 // https://github.com/AGausmann/qmk_firmware/blob/agausmann-v3.x/keyboards/nyquist/keymaps/agausmann/keymap.c
 
 #include QMK_KEYBOARD_H
 
-/* 
+/*
 * Each layer gets a name for readability.
 * The underscores don't mean anything - you can
 * have a layer called STUFF or any other name.
@@ -23,8 +23,8 @@
 #define NL 2     // Numpad Layer
 #define RL 3     // RGB Layer
 
-/* 
-* Let's give an easier name to the RGB modes 
+/*
+* Let's give an easier name to the RGB modes
 * and assign the ones we want to the different layer
 * these will then be used by the function below
 *
@@ -49,10 +49,10 @@
 //
 #define RGB_RL_MODE    rgblight_mode_noeeprom(22)             //rgb mode for RL layer
 #define RGB_RL_LIGHT   rgblight_sethsv_noeeprom_red()         //rgb light for RL layer
-      
+
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	
+
   /* Keymap BL: Base Layer (Default Layer)
    *
    * ,-----------------------------------------------------------.
@@ -140,7 +140,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,   RGB_STA,   RGB_BRE,   RGB_RAI,   RGB_SWI,   _______,   _______,   RGB_SNA,   RGB_KNI,   RGB_GRA,   RGB_XMS,   _______,   _______,   _______,
         _______,   BL_DEC,    BL_TOGG,   BL_INC,    BL_STEP,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,
         _______,   _______,   _______,   _______,   MO(FL),    _______,   _______,   _______,   TO(BL),    _______),
-        
+
 
 };
 
@@ -175,25 +175,25 @@ void matrix_scan_user(void) {
   #ifdef RGBLIGHT_ENABLE
 
   static uint8_t old_layer = 1;
-  uint8_t new_layer = biton32(layer_state);
+  uint8_t new_layer = get_highest_layer(layer_state);
 
   if (old_layer != new_layer) {
     switch (new_layer) {
       case BL:
           RGB_BL_MODE;
-          RGB_BL_LIGHT;        
+          RGB_BL_LIGHT;
         break;
       case FL:
           RGB_FL_MODE;
-          RGB_FL_LIGHT;  
+          RGB_FL_LIGHT;
         break;
       case NL:
-          RGB_NL_MODE; 
-          RGB_NL_LIGHT; 
+          RGB_NL_MODE;
+          RGB_NL_LIGHT;
         break;
       case RL:
-          RGB_RL_MODE; 
-          RGB_RL_LIGHT;        
+          RGB_RL_MODE;
+          RGB_RL_LIGHT;
         break;
     }