Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* organize my keyboards (plaid, tartan, ergoinu)

* update info.json

* fix ergoinu rules.mk

* remove usbconfig.h

keyboards/ergoinu/info.json → keyboards/dm9records/ergoinu/info.json

@@ -1,7 +1,7 @@
 {
   "keyboard_name": "Ergoinu",
   "url": "",
-  "maintainer": "hsgw",
+  "maintainer": "hsgw(Takuya Urakawa)",
   "width": 18,
   "height": 5.4,
   "layouts": {

keyboards/ergoinu/readme.md → keyboards/dm9records/ergoinu/readme.md

@@ -11,11 +11,11 @@ Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://gi
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ergoinu:default
+    make dm9records/ergoinu:default
 
     (or)
 
-    make ergoinu:default_jis
+    make dm9records/ergoinu:default_jis
 
 
 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/ergoinu/rules.mk → keyboards/dm9records/ergoinu/rules.mk

@@ -26,7 +26,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
 SUBPROJECT_rev1 = no
 USE_I2C = no               # i2c is not supported
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -35,8 +35,6 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 CUSTOM_MATRIX = yes
 SRC += matrix.c serial.c split_util.c
 
-DEFAULT_FOLDER = ergoinu
-
 # ergoinu configs
 DISABLE_PROMICRO_LEDs = yes
 

keyboards/plaid/info.json → keyboards/dm9records/plaid/info.json

@@ -1,8 +1,8 @@
 {
   "keyboard_name": "Plaid // Through Hole",
-  "keyboard_folder": "planid",
+  "keyboard_folder": "dm9records/plaid",
   "url": "https://github.com/hsgw/plaid",
-  "maintainer": "hsgw",
+  "maintainer": "hsgw(Takuya Urakawa)",
   "width": 12,
   "height": 4,
   "layouts": {

keyboards/plaid/readme.md → keyboards/dm9records/plaid/readme.md

@@ -9,11 +9,11 @@ Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/hsgw/plaid)
 Hardware Availability: Group buy in r/mk
 
 Make example for this keyboard (after setting up your build environment):
-    make plaid:default
+    make dm9records/plaid:default
 
 Flashing example for this keyboard:
 
-    make plaid:default:flash
+    make dm9records/plaid:default:flash
 
 ## Bootloader
 use usbasploader in my repository.

keyboards/tartan/info.json → keyboards/dm9records/tartan/info.json

@@ -1,6 +1,6 @@
 {
   "keyboard_name": "Tartan # Through Hole",
-  "keyboard_folder": "tartan",
+  "keyboard_folder": "dm9records/tartan",
   "url": "https://github.com/hsgw/tartan",
   "maintainer": "hsgw(Takuya Urakawa)",
   "width": 13,

keyboards/tartan/readme.md → keyboards/dm9records/tartan/readme.md

@@ -10,12 +10,12 @@ A 60% keyboard with only through hole components.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make tartan:default
+    make dm9records/tartan:default
 
 Flash firmware:
 
     // In bootloader mode
-    make tartan:default:flash
+    make dm9records/tartan:default:flash
 
 ## Bootloader
 use usbasploader in my repository.