homebridge-tahoma

Supports TaHoma (Somfy), Connexoon (Somfy), Cozytouch (Atlantic,Thermor,Sauter) and E.Connect 2 (Rexel) platforms on HomeBridge

Main plugin upgrade

New plugin release 2.x.x will have many breaking changes. It will offer better stability for future development but this imply breaking devices identifiers from previous releases. After installing, this version, your devices will be removed from Homekit automation and you will have to configure them again. We appologize for that.

Be careful to update your config file based on following documentation or using Hoobs/Homebridge-UI plugin config management.

Installation

1. Install homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g homebridge-tahoma
3. Update your configuration file. See bellow for a sample.

Configuration

Minimal configuration sample:

{
	"bridge": {
		...
	},

	"description": "...",

	"accessories": [],

	"platforms":[
		{
			"platform": "Tahoma",
			"name": "My TaHoma Box",

			"service": "tahoma",
			"user": "[email protected]",
			"password": "MyPassw0rd",
		}
	]
}

Configuration parameters:

Parameter	Type	Default	Note
service	String	'tahoma'	optional, service name ('tahoma', 'connexoon', 'connexoon_rts', 'cozytouch' or 'rexel')
user	String	null	mandatory, your service account username
password	String	null	mandatory, your service account password
pollingPeriod	Integer	30	optional, bridge polling period in seconds
refreshPeriod	Integer	30	optional, device states refresh period in minutes
exclude	String[]	[]	optional, list of protocols (hue,enocean,zwave,io,rts), ui name, widget name or device name to exclude
exposeScenarios	Boolean	false	optional, expose TaHoma/Connexoon/Cozytouch scenarios as HomeKit switches. Could also specify a list of string corresponding to scenarios names to expose
devicesConfig	Object[]	[]	optional list of device specific configuration (see below)

Specific device configuration

This option allows you to apply a specific configuation to device or group of device. One configuration is composed of a key attribute containing device name, widget, uiClass, protocol or unique identifier and as many parameter depending of device type.

{
	"key": "Bedroom door",
	"param1": "value1"
	...
}

Alarm parameters	Type	Default	Note
stayZones	String	'A'	optional, active zones (A,B,C) in 'Stay' mode
nightZones	String	'B'	optional, active zones (A,B,C) in 'Night' mode
occupancySensor	Boolean	false	optional, add an occupancy widget linked to the alarm

WindowCovering parameters	Type	Default	Note
defaultPosition	Integer	0	optional, final position for UpDown rollershutter after any command
reverse	Boolean	false	optional, reverse up/down in case of bad mounting
lowSpeed	Boolean	false	optional, use low speed for roller shutter supporting it
blindMode	String	null	optional, change main slider action to orientation. By default, both closure and orientation will be set. When setting blindMode: true the blinds work in the following way: Opening the blinds or setting them to 100% will fully open them. Closing the blinds or setting them to 0% will fully close them. Setting the blinds to a value between 1% and 99% will first close the blinds and then adjust thier horizontal tilt in a way that 99% means fully horizonal = more light, and 1% means nearly closed = less light.
blindsOnRollerShutter	Boolean	false	optional, when blinds are installed on roller shutter motors allow slats to stay horizontal (opened) at intermediate position
movementDuration	Integer	0	optional, duration of a full shutter movement from 'open' to 'close' in seconds. Will be used to approximate shutter intermediate position. (0 = disable feature)

GarageDoorOpener parameters	Type	Default	Note
cyclic	Boolean	false	optional, restore closed state after cycleDuration seconds for stateless devices with cyclic behaviour
cycleDuration	Integer	false	optional, cycle duration (in seconds) for cyclic mode (default: 5 sec)
reverse	Boolean	false	optional, reverse up/down in case of bad mounting

HeatingSystem parameters	Type	Default	Note
derogationDuration	Integer	1	optional, duration (in hours) for derogation orders
comfort	Integer	19	optional, comfort temperature used as display for heaters controled by pilot wire
eco	Integer	17	optional, comfort temperature used as display for heaters controled by pilot wire

Full configuration example:

{
	"bridge": {
		...
	},

	"description": "...",

	"accessories": [],

	"platforms":[
		{
			"platform": "Tahoma",
			"name": "My Tahoma Bridge",

			"user": "[email protected]",
			"password": "MyPassw0rd",
			"service": "tahoma",
			"exclude": ["hue", "rts", "Main door"],

			"devicesConfig": [
				{
					"key": "Alarm",
					"stayZones": "A,C"
				},
				{
					"key": "Bedroom blind",
					"blindMode": true
				},
				{
					"key": "GarageDoor",
					"reverse": true
				},
				{
					"key": "UpDownRollerShutter",
					"defaultPosition": 50
				}
			]
		}
	]
}

Contribute

You are welcome to contribute to this plugin development by opening an issue in case of bad behaviour or not implemented device.

Any support request must follow this process :

1. Execute failling operations from official app then from Homekit
2. Report your config to https://dev.duboc.pro/tahoma
3. Browse or open issue with title corresponding to your device widget name (see picture below)
4. Provide your bridge last 4 digits (number visible as SETUP-XXXX-XXXX-XXXX at step 2.)

I do not expect any reward concerning this plugin, however, some users ask me for a button as sign of contribution. Feel free to use it.