Fix examples #190

dhoomakethu · 2017-07-06T04:31:20Z

No description provided.

@staticmethod

* adding another quick example * cutting 200 pep8 errors * working on py3 merge * updating to python3 * reverting back changes, remember Switch flag next time * adding some magic methods, just cause * adding documentation pdf * Fixes issue 49 * Adds True and False constants for older python versions. Update issue 50 * adding tests for a few fixes * Fixes issue 51 * fixing tests broken by interface change * Updates issue 52 * Fixes issue 53 * Fix to add Python < 2.5 compatibility This fix simply removes all the ternaries that were added in Python 2.5. Fixes issue 50 * adding a mostly complete diagnostic register implementation * Adding more documentation and helpful factory methods. The documentation added was to address some questions with the synchronous and asynchrounous server implementations as well as the functionality of the data contexts. The factory methods were added by request to simplify the creation of a fully populated DataBlock address space. * adding modbus plus registers * adding endian ability to payload builder * Finishing the remaining modbus protocol * Adding the remaining portions of the protocol (request/response) * Tieing these into the factory decoder * Adding tests to cover the new code (need more) * Fixing a few bugs found along the way * finished file read/write record requests * documentation, more tests, fixing extra commands * adding more tests * Fixing the client/server async/sync implementations - asynchronous client/server for tcp working and tested - synchronous client/server for tcp/udp working and tested - adding tests to exercise the synchronous client/server - more documentation * adding test stubs to get full coverage count * working on jamod, need to set up more complete project * adding GetDeviceInformationRequest * adding read device information to decoder factory * fixing some example errors * working on the serial implementations * fixing the synchronous server implementation * updating functional tests and documentation for sync-serial * updating tac files * Updating the documentation for the serial client/servers * adding readme to root * Fixes issue 56 * Fixes issue 1 * adding a requirements file for virtualenv folk * adding more cohesive code to the payload utilities * forgot to add the new example to the doc index * Fixing the rtu size calculation isse #55 on google code * using the endian flag in register factory * fixing bad documentation * fixing issue 58 on google code * Fix binary framer and add start and end tokens Fixes a TypeError occuring while escaping token bytes in the message and adds the start and end tokens to the packet. * Adding checking in the client for an unconnected socket. * Fixing issue 60 on google code (including ez_setup) * fixing github issue #7 * adding tests and two utilities * adding message parser utility * Fixing extended message decoding * Now correctly decoding sub function messages (diagnostic) * Message parser now finished and documented * Fixed broken logger unit test * ModbusSparseDataBlock handled dictionaries incorrectly (they have an __iter__ attribute). Changed 'if' to 'elif' * Updating the Readme.rst to explain how to install in zero dependency mode. * Fixing issue #10 * updating the client documentation * updating the server context documentation * fixes #9 on github * fixing the factory decoding and adding examples * pushing to version 1.0 * Fixing a bug in the asynchronous client that slipped through. * complete tests for the sync client * cleaning up some pep8 errors * finished unit tests for async client * adding another test to the test-install script * finished covering sync client * updating documentation * adding another example, adding debug checks * Fixing the serial implementation of everything * updating lots of reference documentation * fixing the fifo semantics of serial clients * using transaction manager in async clients * fixing references * fixing incorrect rtu lenght calculation * Add optional server_address to Sync and Async TCP/UDP Server API * Improve erver_address defaults to passing None * adding a few messages * Adding a message encoding generator for testing. - fixed messages not passing **kwargs to base - fixed binary framer off by 1 - fixed mei_message rtu size tests - added a message generator to use with message parser - fixed message parser with ascii - tested message parser with all formats (added to messages) * adding documentation for message formats * updating documentation and being pedantic * Allowing overloading of message encoding * allow codes like payload builder to encode * added IPayloadBuilder interface (future) * renamed builder methods to reflect vision * added error code decoding to name * fixed affected tests * Cleaning up the build tools - moving custom datastores to examples - bumping required versions - making the debug server console optional - updating documentation * adding support for pydev * fixing broken nosetest (/dev/pts) and pydev issues * adding bcd payload builder * reworking contrib packages * adding bcd payload contrib * moving complex examples to contrib * syncing version on pypi * adding server rest api * moving web -> bottle * fixing documentation * adding gui base * adding initial manager page * adding data view * fixing error in example * adding the ability to override sync client framer * updating the performance test * fixing documentation * fixing memory leak in sync client * adding modicon encoder/decoder * Fix bogus calculation in ModbusSocketFramer.checkFrame (one of the tests also seemed wrong, I had to fix it) * Adding sunspec client example * Changing @staticmethod to @classmethod to fix inheritance * adding method to retrieve all the device blocks * adding the initial mapper interface * adding ideas in progress * adding a modbus datastore saver * making lrc/crc read stdin * adding the callback server example * adding a periodic updating example * fixing documentation * adding fix for stuck RTU streams * fixing documentation error * Adding an example for changing framers - new example changing-framers.py - added documentation link * Reworking the transaction managers to be explicit - Serial framers use the FIFO manager (results in order) - Socket framers use the Dict manager (tid -> result) - Fixed tests and removed bad global managers - Managers no longer use global state (now instance) * Bumping the version and adding a changelog * Fixing a logic error in client code - Now correctly choosing transaction manager * Fixing 2to3 common warnings * Fixed example typo in readme * Adding slave context delete ability - Fixes #20 * Fixing google code issue 69 - custom-message example had bugs - http://code.google.com/p/pymodbus/issues/detail?id=69 * Fixed docstring in synchronous serial client connect() method I think there was a copy/paste error in the docstring. It said tcp but I think it is supposed to be serial. * Fix for issue #21 * Allowing options to be passed through - This fixes issue #21 - Options now go to the transaction manager * Adding source_address to TCP client inputs * Typo * Typo * Typo * Typo * Adding some new examples * modbus scraper (and documentation) * thread safe datastore (and documentation) * Adding a concurrent client example * Allow specification of client connection handler in Modbus...Server o ModbusTcpServer and ModbusUdpServer allows handler class other than default Modbus{Connected,Disconnected}RequestHandler o Add debug logging on request failure, to help diagnose root causes * Fixes #46 * Fixes #48 * Adds the option to drop into zero mode for slaves * Fixes #42 * Bumping the version to 1.3.0 * add missing self operator The parameter values of the constructor within class WriteMultipleRegistersRequest can specified as single value or list of values. But if a single value is given the missing self operator on line 137 leads to crash in line 138 with error: TypeError("object of type 'int' has no len()",) * typo: fix spelling of Parameter Signed-off-by: Karl Palsson <[email protected]> * async: missing slaves: add missing imports 1e0bcde is missing imports into the async server, the import was only added to the sync server. Further fix for #42 Signed-off-by: Karl Palsson <[email protected]> * Fix zero_mode argument for ModbusSlaveContext Using "-" in the argument name causes SyntaxError 'non-keyword arg after keyword arg' * Fix typo in constants * Adding an example and adding tcp timeout * fixes #70 * Endianness now used in packing bytes * Adding a libmodbus wrapper * adding new contrib example of libmodbus client * updating example documentation so users can find it * closes #73 * Execute methods of Requests accept context There were errors whenever a request that got handles in other_message.py got it's execute method called, as it was being called with a context parameter. The functions now accept this parameter, although they don't do anything with it. The tests have also been updated. * Add Modbus RTU syncronous server example * Signal handlers to stop in shutdown(). * WriteMultipleRegistersRequest: Handle values=None case Currently, if None is passed in explicitly, or if values is not given, the 'values' object is correctly identified as *not* having an __iter__ attribute, but is incorrectly identified as being a valid register value. This breaks testInvalidWriteMultipleRegistersRequest. Solution: if we see None, replace this with [] and skip the check for __iter__. * Fix payload tests. Looking at the "encoded" string, it looks identical to that of the big endian encoding string, and my understanding is that the data shown in "encoded" *IS* big-endian, not little-endian. I have no idea how this passed before, but it passes now. * sync.ModbusUdpClient: Correct reference to settimeout. I could not find a 'settimeout' (case-insensitive) anywhere in the codebase other than on this line, but I *did* see it was a method of socket.socket. So I'll assume that this was *supposed* to be calling socket.socket.settimeout. * test-client-sync: Fix UDP connection test. Rather than passing in a vanilla object, we should pass in something that implements the settimeout method. * Lazily initialize InstallManagementConsole Simply importing the management console takes ~0.3 sec on an 1GHz Atom. Since it is (I suspect) often not used, lazily importing it should help startup for many programs. * Fixes the UDP client socket timeout bug fixes #51 * Implement mask_write_register method in client mixin * Workaround for bug 101 #101 * Workaround for bug 101 #101 * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Document Riptide specific instructions. * Include Workaround for bug 101 bashwork#101 * Include Workaround for bug 101 bashwork#101 * Better tag names. * pymodbus fix for modes RTU error cases. * version bumped to c93103 * version bumped to c93103 * fixed issue with pymodbus timing over serial * fixed issue with pymodbus timing over serial * Add RIPTIDE.md to .gitignore * bump version to rc93105 * fix merge conflicts * fix version file * fix unit test failures * cleanup * #121 changelog updated * Misc update Add __maintainer__ field in setup.py * 1. #162, creating universal distribution for py2 and py3 2. Merge PR #152 , create compatible versions * fix test failures * fix ReadDeviceInformationRequest encoding probelm * #166 fix failing tests on python 3.5 * mis - Updated documentation * #167 updated documentation for CI * #167 disable pep8/flake checks for the time being * #167, fix install dependencies osx, remove pypy from supported python versions * #167, fix install dependencies osx, remove pypy from supported python versions * #167 , fix minior error in travis.yml * Bump version to 1.3.0rc2 * Fix #170 and other misc updates * Updated Documents * Add coverage.rc to show missing lines with coverage >4.0 * new documentation * #171 Minor bug fix in BinaryPayloadBuilder.add_string method for python3 * 1. #179 fix error calculating response pdu length for read coil/discrete input requests 2. #179 add tests * Enable debug logging for send packets * #184 prepare for v1.3.1 * Make examples compatible withg python3 * fix #165, #174, #169, #175, #147, #146 * #184 updated changelog * #142 move MaskWriteRegisterRequest/MaskWriteRegisterResponse to register_write_message.py from file_message.py * fix #186 +misc updates * Fixed obvious indentation error in InvalidResponseRecievedException class definition (#193) Signed-off-by: Tomas Hozza <[email protected]> * #190 fix examples - callback-server, modbus-payload * #191 handle interframe timeout for baudrate >19200 on Modbus RTU * #201 Recover modbus server and client from previous errors * Update changelog * #149 SerialServer could be stopped when running on a thread * #149 update changelogs * unit tests for #191, #149 , fix obvious server_start errors * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes (#205) * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes in the payload we are not interested in. * Add an example of skip_bytes usage to the modbus-payload.py example. * update readme

tryer3000 · 2017-08-28T08:15:10Z

examples/functional/synchronous-rtu-client.py fail to pass on ubuntu 16.04

dhoomakethu · 2017-08-28T09:18:20Z

@tryer3000 could you please paste the error trace here ?

tryer3000 · 2017-08-29T05:50:51Z

@dhoomakethu FYI

EEEEEE

ERROR: testReadWriteCoil (main.SynchronousRtuClient)

Traceback (most recent call last):
  File "/home/joshua/ws/open/pymodbus/examples/functional/base_runner.py", line 33, in testReadWriteCoil
    self.__validate(rq, lambda r: r.function_code < 0x80)
  File "/home/joshua/ws/open/pymodbus/examples/functional/base_runner.py", line 81, in __validate
    else: self.assertTrue(test(result))
  File "/home/joshua/ws/open/pymodbus/examples/functional/base_runner.py", line 33, in <lambda>
    self.__validate(rq, lambda r: r.function_code < 0x80)
AttributeError: 'ModbusIOException' object has no attribute 'function_code'

dhoomakethu · 2017-08-29T07:05:43Z

Thanks, will have a look

@staticmethod

* adding another quick example * cutting 200 pep8 errors * working on py3 merge * updating to python3 * reverting back changes, remember Switch flag next time * adding some magic methods, just cause * adding documentation pdf * Fixes issue 49 * Adds True and False constants for older python versions. Update issue 50 * adding tests for a few fixes * Fixes issue 51 * fixing tests broken by interface change * Updates issue 52 * Fixes issue 53 * Fix to add Python < 2.5 compatibility This fix simply removes all the ternaries that were added in Python 2.5. Fixes issue 50 * adding a mostly complete diagnostic register implementation * Adding more documentation and helpful factory methods. The documentation added was to address some questions with the synchronous and asynchrounous server implementations as well as the functionality of the data contexts. The factory methods were added by request to simplify the creation of a fully populated DataBlock address space. * adding modbus plus registers * adding endian ability to payload builder * Finishing the remaining modbus protocol * Adding the remaining portions of the protocol (request/response) * Tieing these into the factory decoder * Adding tests to cover the new code (need more) * Fixing a few bugs found along the way * finished file read/write record requests * documentation, more tests, fixing extra commands * adding more tests * Fixing the client/server async/sync implementations - asynchronous client/server for tcp working and tested - synchronous client/server for tcp/udp working and tested - adding tests to exercise the synchronous client/server - more documentation * adding test stubs to get full coverage count * working on jamod, need to set up more complete project * adding GetDeviceInformationRequest * adding read device information to decoder factory * fixing some example errors * working on the serial implementations * fixing the synchronous server implementation * updating functional tests and documentation for sync-serial * updating tac files * Updating the documentation for the serial client/servers * adding readme to root * Fixes issue 56 * Fixes issue 1 * adding a requirements file for virtualenv folk * adding more cohesive code to the payload utilities * forgot to add the new example to the doc index * Fixing the rtu size calculation isse pymodbus-dev#55 on google code * using the endian flag in register factory * fixing bad documentation * fixing issue 58 on google code * Fix binary framer and add start and end tokens Fixes a TypeError occuring while escaping token bytes in the message and adds the start and end tokens to the packet. * Adding checking in the client for an unconnected socket. * Fixing issue 60 on google code (including ez_setup) * fixing github issue pymodbus-dev#7 * adding tests and two utilities * adding message parser utility * Fixing extended message decoding * Now correctly decoding sub function messages (diagnostic) * Message parser now finished and documented * Fixed broken logger unit test * ModbusSparseDataBlock handled dictionaries incorrectly (they have an __iter__ attribute). Changed 'if' to 'elif' * Updating the Readme.rst to explain how to install in zero dependency mode. * Fixing issue pymodbus-dev#10 * updating the client documentation * updating the server context documentation * fixes pymodbus-dev#9 on github * fixing the factory decoding and adding examples * pushing to version 1.0 * Fixing a bug in the asynchronous client that slipped through. * complete tests for the sync client * cleaning up some pep8 errors * finished unit tests for async client * adding another test to the test-install script * finished covering sync client * updating documentation * adding another example, adding debug checks * Fixing the serial implementation of everything * updating lots of reference documentation * fixing the fifo semantics of serial clients * using transaction manager in async clients * fixing references * fixing incorrect rtu lenght calculation * Add optional server_address to Sync and Async TCP/UDP Server API * Improve erver_address defaults to passing None * adding a few messages * Adding a message encoding generator for testing. - fixed messages not passing **kwargs to base - fixed binary framer off by 1 - fixed mei_message rtu size tests - added a message generator to use with message parser - fixed message parser with ascii - tested message parser with all formats (added to messages) * adding documentation for message formats * updating documentation and being pedantic * Allowing overloading of message encoding * allow codes like payload builder to encode * added IPayloadBuilder interface (future) * renamed builder methods to reflect vision * added error code decoding to name * fixed affected tests * Cleaning up the build tools - moving custom datastores to examples - bumping required versions - making the debug server console optional - updating documentation * adding support for pydev * fixing broken nosetest (/dev/pts) and pydev issues * adding bcd payload builder * reworking contrib packages * adding bcd payload contrib * moving complex examples to contrib * syncing version on pypi * adding server rest api * moving web -> bottle * fixing documentation * adding gui base * adding initial manager page * adding data view * fixing error in example * adding the ability to override sync client framer * updating the performance test * fixing documentation * fixing memory leak in sync client * adding modicon encoder/decoder * Fix bogus calculation in ModbusSocketFramer.checkFrame (one of the tests also seemed wrong, I had to fix it) * Adding sunspec client example * Changing @staticmethod to @classmethod to fix inheritance * adding method to retrieve all the device blocks * adding the initial mapper interface * adding ideas in progress * adding a modbus datastore saver * making lrc/crc read stdin * adding the callback server example * adding a periodic updating example * fixing documentation * adding fix for stuck RTU streams * fixing documentation error * Adding an example for changing framers - new example changing-framers.py - added documentation link * Reworking the transaction managers to be explicit - Serial framers use the FIFO manager (results in order) - Socket framers use the Dict manager (tid -> result) - Fixed tests and removed bad global managers - Managers no longer use global state (now instance) * Bumping the version and adding a changelog * Fixing a logic error in client code - Now correctly choosing transaction manager * Fixing 2to3 common warnings * Fixed example typo in readme * Adding slave context delete ability - Fixes pymodbus-dev#20 * Fixing google code issue 69 - custom-message example had bugs - http://code.google.com/p/pymodbus/issues/detail?id=69 * Fixed docstring in synchronous serial client connect() method I think there was a copy/paste error in the docstring. It said tcp but I think it is supposed to be serial. * Fix for issue pymodbus-dev#21 * Allowing options to be passed through - This fixes issue pymodbus-dev#21 - Options now go to the transaction manager * Adding source_address to TCP client inputs * Typo * Typo * Typo * Typo * Adding some new examples * modbus scraper (and documentation) * thread safe datastore (and documentation) * Adding a concurrent client example * Allow specification of client connection handler in Modbus...Server o ModbusTcpServer and ModbusUdpServer allows handler class other than default Modbus{Connected,Disconnected}RequestHandler o Add debug logging on request failure, to help diagnose root causes * Fixes pymodbus-dev#46 * Fixes pymodbus-dev#48 * Adds the option to drop into zero mode for slaves * Fixes pymodbus-dev#42 * Bumping the version to 1.3.0 * add missing self operator The parameter values of the constructor within class WriteMultipleRegistersRequest can specified as single value or list of values. But if a single value is given the missing self operator on line 137 leads to crash in line 138 with error: TypeError("object of type 'int' has no len()",) * typo: fix spelling of Parameter Signed-off-by: Karl Palsson <[email protected]> * async: missing slaves: add missing imports 1e0bcde is missing imports into the async server, the import was only added to the sync server. Further fix for pymodbus-dev#42 Signed-off-by: Karl Palsson <[email protected]> * Fix zero_mode argument for ModbusSlaveContext Using "-" in the argument name causes SyntaxError 'non-keyword arg after keyword arg' * Fix typo in constants * Adding an example and adding tcp timeout * fixes pymodbus-dev#70 * Endianness now used in packing bytes * Adding a libmodbus wrapper * adding new contrib example of libmodbus client * updating example documentation so users can find it * closes pymodbus-dev#73 * Execute methods of Requests accept context There were errors whenever a request that got handles in other_message.py got it's execute method called, as it was being called with a context parameter. The functions now accept this parameter, although they don't do anything with it. The tests have also been updated. * Add Modbus RTU syncronous server example * Signal handlers to stop in shutdown(). * WriteMultipleRegistersRequest: Handle values=None case Currently, if None is passed in explicitly, or if values is not given, the 'values' object is correctly identified as *not* having an __iter__ attribute, but is incorrectly identified as being a valid register value. This breaks testInvalidWriteMultipleRegistersRequest. Solution: if we see None, replace this with [] and skip the check for __iter__. * Fix payload tests. Looking at the "encoded" string, it looks identical to that of the big endian encoding string, and my understanding is that the data shown in "encoded" *IS* big-endian, not little-endian. I have no idea how this passed before, but it passes now. * sync.ModbusUdpClient: Correct reference to settimeout. I could not find a 'settimeout' (case-insensitive) anywhere in the codebase other than on this line, but I *did* see it was a method of socket.socket. So I'll assume that this was *supposed* to be calling socket.socket.settimeout. * test-client-sync: Fix UDP connection test. Rather than passing in a vanilla object, we should pass in something that implements the settimeout method. * Lazily initialize InstallManagementConsole Simply importing the management console takes ~0.3 sec on an 1GHz Atom. Since it is (I suspect) often not used, lazily importing it should help startup for many programs. * Fixes the UDP client socket timeout bug fixes pymodbus-dev#51 * Implement mask_write_register method in client mixin * Workaround for bug 101 pymodbus-dev#101 * Workaround for bug 101 pymodbus-dev#101 * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Document Riptide specific instructions. * Include Workaround for bug 101 bashwork#101 * Include Workaround for bug 101 bashwork#101 * Better tag names. * pymodbus fix for modes RTU error cases. * version bumped to c93103 * version bumped to c93103 * fixed issue with pymodbus timing over serial * fixed issue with pymodbus timing over serial * Add RIPTIDE.md to .gitignore * bump version to rc93105 * fix merge conflicts * fix version file * fix unit test failures * cleanup * pymodbus-dev#121 changelog updated * Misc update Add __maintainer__ field in setup.py * 1. pymodbus-dev#162, creating universal distribution for py2 and py3 2. Merge PR pymodbus-dev#152 , create compatible versions * fix test failures * fix ReadDeviceInformationRequest encoding probelm * pymodbus-dev#166 fix failing tests on python 3.5 * mis - Updated documentation * pymodbus-dev#167 updated documentation for CI * pymodbus-dev#167 disable pep8/flake checks for the time being * pymodbus-dev#167, fix install dependencies osx, remove pypy from supported python versions * pymodbus-dev#167, fix install dependencies osx, remove pypy from supported python versions * pymodbus-dev#167 , fix minior error in travis.yml * Bump version to 1.3.0rc2 * Fix pymodbus-dev#170 and other misc updates * Updated Documents * Add coverage.rc to show missing lines with coverage >4.0 * new documentation * pymodbus-dev#171 Minor bug fix in BinaryPayloadBuilder.add_string method for python3 * 1. pymodbus-dev#179 fix error calculating response pdu length for read coil/discrete input requests 2. pymodbus-dev#179 add tests * Enable debug logging for send packets * pymodbus-dev#184 prepare for v1.3.1 * Make examples compatible withg python3 * fix pymodbus-dev#165, pymodbus-dev#174, pymodbus-dev#169, pymodbus-dev#175, pymodbus-dev#147, pymodbus-dev#146 * pymodbus-dev#184 updated changelog * pymodbus-dev#142 move MaskWriteRegisterRequest/MaskWriteRegisterResponse to register_write_message.py from file_message.py * fix pymodbus-dev#186 +misc updates * Fixed obvious indentation error in InvalidResponseRecievedException class definition (pymodbus-dev#193) Signed-off-by: Tomas Hozza <[email protected]> * pymodbus-dev#190 fix examples - callback-server, modbus-payload * pymodbus-dev#191 handle interframe timeout for baudrate >19200 on Modbus RTU * pymodbus-dev#201 Recover modbus server and client from previous errors * Update changelog * pymodbus-dev#149 SerialServer could be stopped when running on a thread * pymodbus-dev#149 update changelogs * unit tests for pymodbus-dev#191, pymodbus-dev#149 , fix obvious server_start errors * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes (pymodbus-dev#205) * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes in the payload we are not interested in. * Add an example of skip_bytes usage to the modbus-payload.py example. * update readme

@staticmethod

* adding another quick example * cutting 200 pep8 errors * working on py3 merge * updating to python3 * reverting back changes, remember Switch flag next time * adding some magic methods, just cause * adding documentation pdf * Fixes issue 49 * Adds True and False constants for older python versions. Update issue 50 * adding tests for a few fixes * Fixes issue 51 * fixing tests broken by interface change * Updates issue 52 * Fixes issue 53 * Fix to add Python < 2.5 compatibility This fix simply removes all the ternaries that were added in Python 2.5. Fixes issue 50 * adding a mostly complete diagnostic register implementation * Adding more documentation and helpful factory methods. The documentation added was to address some questions with the synchronous and asynchrounous server implementations as well as the functionality of the data contexts. The factory methods were added by request to simplify the creation of a fully populated DataBlock address space. * adding modbus plus registers * adding endian ability to payload builder * Finishing the remaining modbus protocol * Adding the remaining portions of the protocol (request/response) * Tieing these into the factory decoder * Adding tests to cover the new code (need more) * Fixing a few bugs found along the way * finished file read/write record requests * documentation, more tests, fixing extra commands * adding more tests * Fixing the client/server async/sync implementations - asynchronous client/server for tcp working and tested - synchronous client/server for tcp/udp working and tested - adding tests to exercise the synchronous client/server - more documentation * adding test stubs to get full coverage count * working on jamod, need to set up more complete project * adding GetDeviceInformationRequest * adding read device information to decoder factory * fixing some example errors * working on the serial implementations * fixing the synchronous server implementation * updating functional tests and documentation for sync-serial * updating tac files * Updating the documentation for the serial client/servers * adding readme to root * Fixes issue 56 * Fixes issue 1 * adding a requirements file for virtualenv folk * adding more cohesive code to the payload utilities * forgot to add the new example to the doc index * Fixing the rtu size calculation isse #55 on google code * using the endian flag in register factory * fixing bad documentation * fixing issue 58 on google code * Fix binary framer and add start and end tokens Fixes a TypeError occuring while escaping token bytes in the message and adds the start and end tokens to the packet. * Adding checking in the client for an unconnected socket. * Fixing issue 60 on google code (including ez_setup) * fixing github issue #7 * adding tests and two utilities * adding message parser utility * Fixing extended message decoding * Now correctly decoding sub function messages (diagnostic) * Message parser now finished and documented * Fixed broken logger unit test * ModbusSparseDataBlock handled dictionaries incorrectly (they have an __iter__ attribute). Changed 'if' to 'elif' * Updating the Readme.rst to explain how to install in zero dependency mode. * Fixing issue #10 * updating the client documentation * updating the server context documentation * fixes #9 on github * fixing the factory decoding and adding examples * pushing to version 1.0 * Fixing a bug in the asynchronous client that slipped through. * complete tests for the sync client * cleaning up some pep8 errors * finished unit tests for async client * adding another test to the test-install script * finished covering sync client * updating documentation * adding another example, adding debug checks * Fixing the serial implementation of everything * updating lots of reference documentation * fixing the fifo semantics of serial clients * using transaction manager in async clients * fixing references * fixing incorrect rtu lenght calculation * Add optional server_address to Sync and Async TCP/UDP Server API * Improve erver_address defaults to passing None * adding a few messages * Adding a message encoding generator for testing. - fixed messages not passing **kwargs to base - fixed binary framer off by 1 - fixed mei_message rtu size tests - added a message generator to use with message parser - fixed message parser with ascii - tested message parser with all formats (added to messages) * adding documentation for message formats * updating documentation and being pedantic * Allowing overloading of message encoding * allow codes like payload builder to encode * added IPayloadBuilder interface (future) * renamed builder methods to reflect vision * added error code decoding to name * fixed affected tests * Cleaning up the build tools - moving custom datastores to examples - bumping required versions - making the debug server console optional - updating documentation * adding support for pydev * fixing broken nosetest (/dev/pts) and pydev issues * adding bcd payload builder * reworking contrib packages * adding bcd payload contrib * moving complex examples to contrib * syncing version on pypi * adding server rest api * moving web -> bottle * fixing documentation * adding gui base * adding initial manager page * adding data view * fixing error in example * adding the ability to override sync client framer * updating the performance test * fixing documentation * fixing memory leak in sync client * adding modicon encoder/decoder * Fix bogus calculation in ModbusSocketFramer.checkFrame (one of the tests also seemed wrong, I had to fix it) * Adding sunspec client example * Changing @staticmethod to @classmethod to fix inheritance * adding method to retrieve all the device blocks * adding the initial mapper interface * adding ideas in progress * adding a modbus datastore saver * making lrc/crc read stdin * adding the callback server example * adding a periodic updating example * fixing documentation * adding fix for stuck RTU streams * fixing documentation error * Adding an example for changing framers - new example changing-framers.py - added documentation link * Reworking the transaction managers to be explicit - Serial framers use the FIFO manager (results in order) - Socket framers use the Dict manager (tid -> result) - Fixed tests and removed bad global managers - Managers no longer use global state (now instance) * Bumping the version and adding a changelog * Fixing a logic error in client code - Now correctly choosing transaction manager * Fixing 2to3 common warnings * Fixed example typo in readme * Adding slave context delete ability - Fixes #20 * Fixing google code issue 69 - custom-message example had bugs - http://code.google.com/p/pymodbus/issues/detail?id=69 * Fixed docstring in synchronous serial client connect() method I think there was a copy/paste error in the docstring. It said tcp but I think it is supposed to be serial. * Fix for issue #21 * Allowing options to be passed through - This fixes issue #21 - Options now go to the transaction manager * Adding source_address to TCP client inputs * Typo * Typo * Typo * Typo * Adding some new examples * modbus scraper (and documentation) * thread safe datastore (and documentation) * Adding a concurrent client example * Allow specification of client connection handler in Modbus...Server o ModbusTcpServer and ModbusUdpServer allows handler class other than default Modbus{Connected,Disconnected}RequestHandler o Add debug logging on request failure, to help diagnose root causes * Fixes #46 * Fixes #48 * Adds the option to drop into zero mode for slaves * Fixes #42 * Bumping the version to 1.3.0 * add missing self operator The parameter values of the constructor within class WriteMultipleRegistersRequest can specified as single value or list of values. But if a single value is given the missing self operator on line 137 leads to crash in line 138 with error: TypeError("object of type 'int' has no len()",) * typo: fix spelling of Parameter Signed-off-by: Karl Palsson <[email protected]> * async: missing slaves: add missing imports 1e0bcde is missing imports into the async server, the import was only added to the sync server. Further fix for #42 Signed-off-by: Karl Palsson <[email protected]> * Fix zero_mode argument for ModbusSlaveContext Using "-" in the argument name causes SyntaxError 'non-keyword arg after keyword arg' * Fix typo in constants * Adding an example and adding tcp timeout * fixes #70 * Endianness now used in packing bytes * Adding a libmodbus wrapper * adding new contrib example of libmodbus client * updating example documentation so users can find it * closes #73 * Execute methods of Requests accept context There were errors whenever a request that got handles in other_message.py got it's execute method called, as it was being called with a context parameter. The functions now accept this parameter, although they don't do anything with it. The tests have also been updated. * Add Modbus RTU syncronous server example * Signal handlers to stop in shutdown(). * WriteMultipleRegistersRequest: Handle values=None case Currently, if None is passed in explicitly, or if values is not given, the 'values' object is correctly identified as *not* having an __iter__ attribute, but is incorrectly identified as being a valid register value. This breaks testInvalidWriteMultipleRegistersRequest. Solution: if we see None, replace this with [] and skip the check for __iter__. * Fix payload tests. Looking at the "encoded" string, it looks identical to that of the big endian encoding string, and my understanding is that the data shown in "encoded" *IS* big-endian, not little-endian. I have no idea how this passed before, but it passes now. * sync.ModbusUdpClient: Correct reference to settimeout. I could not find a 'settimeout' (case-insensitive) anywhere in the codebase other than on this line, but I *did* see it was a method of socket.socket. So I'll assume that this was *supposed* to be calling socket.socket.settimeout. * test-client-sync: Fix UDP connection test. Rather than passing in a vanilla object, we should pass in something that implements the settimeout method. * Lazily initialize InstallManagementConsole Simply importing the management console takes ~0.3 sec on an 1GHz Atom. Since it is (I suspect) often not used, lazily importing it should help startup for many programs. * Fixes the UDP client socket timeout bug fixes #51 * Implement mask_write_register method in client mixin * Workaround for bug 101 #101 * Workaround for bug 101 #101 * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Riptide 1.3.0 pymodbus internal pre-release (riptide1) with dhoomakethu's fix for bashwork#101. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Use a PEP 404 compliant version. Start at rc93101 to usurp any other real release candidates. * Document Riptide specific instructions. * Include Workaround for bug 101 bashwork#101 * Include Workaround for bug 101 bashwork#101 * Better tag names. * pymodbus fix for modes RTU error cases. * version bumped to c93103 * version bumped to c93103 * fixed issue with pymodbus timing over serial * fixed issue with pymodbus timing over serial * Add RIPTIDE.md to .gitignore * bump version to rc93105 * fix merge conflicts * fix version file * fix unit test failures * cleanup * #121 changelog updated * Misc update Add __maintainer__ field in setup.py * 1. #162, creating universal distribution for py2 and py3 2. Merge PR #152 , create compatible versions * fix test failures * fix ReadDeviceInformationRequest encoding probelm * #166 fix failing tests on python 3.5 * mis - Updated documentation * #167 updated documentation for CI * #167 disable pep8/flake checks for the time being * #167, fix install dependencies osx, remove pypy from supported python versions * #167, fix install dependencies osx, remove pypy from supported python versions * #167 , fix minior error in travis.yml * Bump version to 1.3.0rc2 * Fix #170 and other misc updates * Updated Documents * Add coverage.rc to show missing lines with coverage >4.0 * new documentation * #171 Minor bug fix in BinaryPayloadBuilder.add_string method for python3 * 1. #179 fix error calculating response pdu length for read coil/discrete input requests 2. #179 add tests * Enable debug logging for send packets * #184 prepare for v1.3.1 * Make examples compatible withg python3 * fix #165, #174, #169, #175, #147, #146 * #184 updated changelog * #142 move MaskWriteRegisterRequest/MaskWriteRegisterResponse to register_write_message.py from file_message.py * fix #186 +misc updates * Fixed obvious indentation error in InvalidResponseRecievedException class definition (#193) Signed-off-by: Tomas Hozza <[email protected]> * #190 fix examples - callback-server, modbus-payload * #191 handle interframe timeout for baudrate >19200 on Modbus RTU * #201 Recover modbus server and client from previous errors * Update changelog * #149 SerialServer could be stopped when running on a thread * #149 update changelogs * unit tests for #191, #149 , fix obvious server_start errors * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes (#205) * Add new skip_bytes method to BinaryPayloadDecoder to skip over bytes in the payload we are not interested in. * Add an example of skip_bytes usage to the modbus-payload.py example. * update readme

Fix #234 Note to #190

rahulraghu94 · 2017-11-24T13:30:56Z

@dhoomakethu, are there more examples that are broken apart from the ones that got fixed this week?

* PYM-2: - The issue listed was due to wrong messages being passed by the user. Upon passing the right messages codes, the parser works as expected on all counts. - There is also changes that make the parser compatible with python2 and python3 - Verifier that the tool works on both python3 and python2 for all MODBUS message codes on TCP, RTU, and BIN * PYM-2: Checking the incoming framer. If te Framer is a Binary Framer, we take the unit address as the second incoming bite as opposed to the first bite. This is was done while fixing the message parsers for binary messages * PYM-2: Changed the modbus binary header size from 2 to 1. According to the docs: Modbus Binary Frame Controller:: [ Start ][Address ][ Function ][ Data ][ CRC ][ End ] 1b 1b 1b Nb 2b 1b * PYM-3: Script is now compatible with both python2 and python3 * WIP * PYM-2: Added a new switch: -t --transaction This switch is meant to be used when we wish to parse messages directly from the logs of Modbus. The format of a message as shown in the logs is like bellow: 0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d We can pass this as the message to the parser along with the -t witch to convert it into a compatible message to be parsed. EG: (modbus3) [~/pymodbus/examples/contrib]$ ./message-parser.py -b -t -p binary -m "0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d" ================================================================================ Decoding Message b'7b01050000ff008c3a7d' ================================================================================ ServerDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilRequest transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = This function code is used to write a single output to either ON or OFF in a remote device. The requested ON/OFF state is specified by a constant in the request data field. A value of FF 00 hex requests the output to be ON. A value of 00 00 requests it to be OFF. All other values are illegal and will not affect the output. The Request PDU specifies the address of the coil to be forced. Coils are addressed starting at zero. Therefore coil numbered 1 is addressed as 0. The requested ON/OFF state is specified by a constant in the Coil Value field. A value of 0XFF00 requests the coil to be ON. A value of 0X0000 requests the coil to be off. All other values are illegal and will not affect the coil. ClientDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilResponse transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = The normal response is an echo of the request, returned after the coil state has been written. * PYM-2: Removing additional dependancy and making use of existing porting tools * PYM-3: Removing additional dependancy and making use of existing porting tools * Initial Bitbucket Pipelines configuration * bitbucket-pipelines.yml edited online with Bitbucket * bitbucket-pipelines.yml edited online with Bitbucket * PYM-2: Updated the transaction tests for BinaryFramerTransaction. The header for Binary trasaction is of size 1. This was recrtified earlier commits of this branch. The test ensure these changes * PYM-6: Minor Cleanup task Removing the argument handler in TCP Syncronous server. This argument is not used any where. * PYM-6: ModbusUdpServer and ModbusTcpServer will now accept any legal Modbus request handler. The request handler being passed will have to be of instance ModbusBaseRequestHandler. The default request handler is ModbusDisconnectedRequestHandler. I.e., is no handler is passed, or if the handler is not of type ModbusBaseRequestHandler, ModbusDisconnectedRequestHandler will be made use of. * PYM-6: Removing uneccessary check if handler is of type ModbusBaseRequestHandler * PYM-8: Example that read from a database as a datastore * PYM-8: Added two new datastores that can be used. - SQLite3 - Reddis * Small fixes * Small fixes * Small fixes * Cleanup * PYM-8: Updated the example to first write a random value at a random afddress to a database and then read from that address * PYM-8: Added neccessary checks and methods to allow hassle free writes to database. The process first checks if the address and value are already present in the database before performing a write. This ensures that database transaction errors will now occur in cases where repetetive data is being written. * Cleanup: Removing pdb placed during testing and other comments * bitbucket-pipelines.yml deleted online with Bitbucket * #240 Fix PR failures * #240 fix Travis build failures * #190 fix import error in dbstore-update-server example * Small changes and typo fixed in pymodbus utilities and redis datastore helpers * Added tests for redis datastore helpers * Minor fixes to SQL datastore * Unit tests for SQL datastore - 100% coverage * Tests now compatible with python3 and python2

Fix pymodbus-dev#234 Note to pymodbus-dev#190

* PYM-2: - The issue listed was due to wrong messages being passed by the user. Upon passing the right messages codes, the parser works as expected on all counts. - There is also changes that make the parser compatible with python2 and python3 - Verifier that the tool works on both python3 and python2 for all MODBUS message codes on TCP, RTU, and BIN * PYM-2: Checking the incoming framer. If te Framer is a Binary Framer, we take the unit address as the second incoming bite as opposed to the first bite. This is was done while fixing the message parsers for binary messages * PYM-2: Changed the modbus binary header size from 2 to 1. According to the docs: Modbus Binary Frame Controller:: [ Start ][Address ][ Function ][ Data ][ CRC ][ End ] 1b 1b 1b Nb 2b 1b * PYM-3: Script is now compatible with both python2 and python3 * WIP * PYM-2: Added a new switch: -t --transaction This switch is meant to be used when we wish to parse messages directly from the logs of Modbus. The format of a message as shown in the logs is like bellow: 0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d We can pass this as the message to the parser along with the -t witch to convert it into a compatible message to be parsed. EG: (modbus3) [~/pymodbus/examples/contrib]$ ./message-parser.py -b -t -p binary -m "0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d" ================================================================================ Decoding Message b'7b01050000ff008c3a7d' ================================================================================ ServerDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilRequest transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = This function code is used to write a single output to either ON or OFF in a remote device. The requested ON/OFF state is specified by a constant in the request data field. A value of FF 00 hex requests the output to be ON. A value of 00 00 requests it to be OFF. All other values are illegal and will not affect the output. The Request PDU specifies the address of the coil to be forced. Coils are addressed starting at zero. Therefore coil numbered 1 is addressed as 0. The requested ON/OFF state is specified by a constant in the Coil Value field. A value of 0XFF00 requests the coil to be ON. A value of 0X0000 requests the coil to be off. All other values are illegal and will not affect the coil. ClientDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilResponse transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = The normal response is an echo of the request, returned after the coil state has been written. * PYM-2: Removing additional dependancy and making use of existing porting tools * PYM-3: Removing additional dependancy and making use of existing porting tools * Initial Bitbucket Pipelines configuration * bitbucket-pipelines.yml edited online with Bitbucket * bitbucket-pipelines.yml edited online with Bitbucket * PYM-2: Updated the transaction tests for BinaryFramerTransaction. The header for Binary trasaction is of size 1. This was recrtified earlier commits of this branch. The test ensure these changes * PYM-6: Minor Cleanup task Removing the argument handler in TCP Syncronous server. This argument is not used any where. * PYM-6: ModbusUdpServer and ModbusTcpServer will now accept any legal Modbus request handler. The request handler being passed will have to be of instance ModbusBaseRequestHandler. The default request handler is ModbusDisconnectedRequestHandler. I.e., is no handler is passed, or if the handler is not of type ModbusBaseRequestHandler, ModbusDisconnectedRequestHandler will be made use of. * PYM-6: Removing uneccessary check if handler is of type ModbusBaseRequestHandler * PYM-8: Example that read from a database as a datastore * PYM-8: Added two new datastores that can be used. - SQLite3 - Reddis * Small fixes * Small fixes * Small fixes * Cleanup * PYM-8: Updated the example to first write a random value at a random afddress to a database and then read from that address * PYM-8: Added neccessary checks and methods to allow hassle free writes to database. The process first checks if the address and value are already present in the database before performing a write. This ensures that database transaction errors will now occur in cases where repetetive data is being written. * Cleanup: Removing pdb placed during testing and other comments * bitbucket-pipelines.yml deleted online with Bitbucket * pymodbus-dev#240 Fix PR failures * pymodbus-dev#240 fix Travis build failures * pymodbus-dev#190 fix import error in dbstore-update-server example * Small changes and typo fixed in pymodbus utilities and redis datastore helpers * Added tests for redis datastore helpers * Minor fixes to SQL datastore * Unit tests for SQL datastore - 100% coverage * Tests now compatible with python3 and python2

Fix #234 Note to #190

* PYM-2: - The issue listed was due to wrong messages being passed by the user. Upon passing the right messages codes, the parser works as expected on all counts. - There is also changes that make the parser compatible with python2 and python3 - Verifier that the tool works on both python3 and python2 for all MODBUS message codes on TCP, RTU, and BIN * PYM-2: Checking the incoming framer. If te Framer is a Binary Framer, we take the unit address as the second incoming bite as opposed to the first bite. This is was done while fixing the message parsers for binary messages * PYM-2: Changed the modbus binary header size from 2 to 1. According to the docs: Modbus Binary Frame Controller:: [ Start ][Address ][ Function ][ Data ][ CRC ][ End ] 1b 1b 1b Nb 2b 1b * PYM-3: Script is now compatible with both python2 and python3 * WIP * PYM-2: Added a new switch: -t --transaction This switch is meant to be used when we wish to parse messages directly from the logs of Modbus. The format of a message as shown in the logs is like bellow: 0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d We can pass this as the message to the parser along with the -t witch to convert it into a compatible message to be parsed. EG: (modbus3) [~/pymodbus/examples/contrib]$ ./message-parser.py -b -t -p binary -m "0x7b 0x1 0x5 0x0 0x0 0xff 0x0 0x8c 0x3a 0x7d" ================================================================================ Decoding Message b'7b01050000ff008c3a7d' ================================================================================ ServerDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilRequest transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = This function code is used to write a single output to either ON or OFF in a remote device. The requested ON/OFF state is specified by a constant in the request data field. A value of FF 00 hex requests the output to be ON. A value of 00 00 requests it to be OFF. All other values are illegal and will not affect the output. The Request PDU specifies the address of the coil to be forced. Coils are addressed starting at zero. Therefore coil numbered 1 is addressed as 0. The requested ON/OFF state is specified by a constant in the Coil Value field. A value of 0XFF00 requests the coil to be ON. A value of 0X0000 requests the coil to be off. All other values are illegal and will not affect the coil. ClientDecoder -------------------------------------------------------------------------------- name = WriteSingleCoilResponse transaction_id = 0x0 protocol_id = 0x0 unit_id = . [1] skip_encode = 0x0 check = 0x0 address = 0x0 value = 0x1 documentation = The normal response is an echo of the request, returned after the coil state has been written. * PYM-2: Removing additional dependancy and making use of existing porting tools * PYM-3: Removing additional dependancy and making use of existing porting tools * Initial Bitbucket Pipelines configuration * bitbucket-pipelines.yml edited online with Bitbucket * bitbucket-pipelines.yml edited online with Bitbucket * PYM-2: Updated the transaction tests for BinaryFramerTransaction. The header for Binary trasaction is of size 1. This was recrtified earlier commits of this branch. The test ensure these changes * PYM-6: Minor Cleanup task Removing the argument handler in TCP Syncronous server. This argument is not used any where. * PYM-6: ModbusUdpServer and ModbusTcpServer will now accept any legal Modbus request handler. The request handler being passed will have to be of instance ModbusBaseRequestHandler. The default request handler is ModbusDisconnectedRequestHandler. I.e., is no handler is passed, or if the handler is not of type ModbusBaseRequestHandler, ModbusDisconnectedRequestHandler will be made use of. * PYM-6: Removing uneccessary check if handler is of type ModbusBaseRequestHandler * PYM-8: Example that read from a database as a datastore * PYM-8: Added two new datastores that can be used. - SQLite3 - Reddis * Small fixes * Small fixes * Small fixes * Cleanup * PYM-8: Updated the example to first write a random value at a random afddress to a database and then read from that address * PYM-8: Added neccessary checks and methods to allow hassle free writes to database. The process first checks if the address and value are already present in the database before performing a write. This ensures that database transaction errors will now occur in cases where repetetive data is being written. * Cleanup: Removing pdb placed during testing and other comments * bitbucket-pipelines.yml deleted online with Bitbucket * #240 Fix PR failures * #240 fix Travis build failures * #190 fix import error in dbstore-update-server example * Small changes and typo fixed in pymodbus utilities and redis datastore helpers * Added tests for redis datastore helpers * Minor fixes to SQL datastore * Unit tests for SQL datastore - 100% coverage * Tests now compatible with python3 and python2

… and BinaryPayloadBuilder 2. #138 Updated tests and examples (#190) 3. #209 Bump version to 1.4.0

dhoomakethu added the Enhancements label Jul 6, 2017

dhoomakethu added this to the 1.4.0 milestone Jul 6, 2017

dhoomakethu added a commit that referenced this issue Aug 4, 2017

#190 fix examples - callback-server, modbus-payload

00cba7e

dhoomakethu mentioned this issue Aug 24, 2017

Prepare for 1.4.0 #209

Closed

21 tasks

dhoomakethu added a commit to bhagn/pymodbus that referenced this issue Oct 10, 2017

pymodbus-dev#190 fix examples - callback-server, modbus-payload

ac7a1d6

dhoomakethu added the help wanted label Oct 14, 2017

dhoomakethu added a commit that referenced this issue Oct 26, 2017

#190 fix asynchronous processor example

b03cd88

dhoomakethu added a commit that referenced this issue Oct 26, 2017

#190 fix examples - callback-server, modbus-payload

1207e5e

dhoomakethu added a commit that referenced this issue Oct 26, 2017

#190 fix asynchronous processor example

576b61a

dhoomakethu added a commit that referenced this issue Oct 26, 2017

#190 fix asynchronous processor example

f226bcd

dhoomakethu added a commit that referenced this issue Nov 3, 2017

Fix example remote_server_context

4736b0f

Fix #234 Note to #190

dhoomakethu mentioned this issue Nov 3, 2017

Fix example remote_server_context #236

Merged

dhoomakethu added a commit that referenced this issue Nov 6, 2017

Fix example remote_server_context (#236)

2bbb5e5

Fix #234 Note to #190

dhoomakethu mentioned this issue Nov 24, 2017

Test dev #240

Merged

dhoomakethu added a commit that referenced this issue Nov 24, 2017

#190 fix import error in dbstore-update-server example

3b7643a

wexi pushed a commit to wexi/pymodbus that referenced this issue Dec 1, 2017

pymodbus-dev#190 fix asynchronous processor example

c845e91

wexi pushed a commit to wexi/pymodbus that referenced this issue Dec 1, 2017

Fix example remote_server_context (pymodbus-dev#236)

a460dd3

Fix pymodbus-dev#234 Note to pymodbus-dev#190

dhoomakethu added a commit that referenced this issue Dec 21, 2017

#190 fix asynchronous processor example

06e1934

dhoomakethu added a commit that referenced this issue Dec 21, 2017

Fix example remote_server_context (#236)

019e9e0

Fix #234 Note to #190

dhoomakethu added a commit that referenced this issue Jan 3, 2018

1. #138 Add support to manipulate wordorder with BinaryPayloadDecoder…

b4f3987

… and BinaryPayloadBuilder 2. #138 Updated tests and examples (#190) 3. #209 Bump version to 1.4.0

dhoomakethu closed this as completed Jan 3, 2018

github-actions bot locked as resolved and limited conversation to collaborators Apr 21, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix examples #190

Fix examples #190

dhoomakethu commented Jul 6, 2017

tryer3000 commented Aug 28, 2017

dhoomakethu commented Aug 28, 2017

tryer3000 commented Aug 29, 2017

dhoomakethu commented Aug 29, 2017

rahulraghu94 commented Nov 24, 2017

Fix examples #190

Fix examples #190

Comments

dhoomakethu commented Jul 6, 2017

tryer3000 commented Aug 28, 2017

dhoomakethu commented Aug 28, 2017

tryer3000 commented Aug 29, 2017

EEEEEE

ERROR: testReadWriteCoil (main.SynchronousRtuClient)

dhoomakethu commented Aug 29, 2017

rahulraghu94 commented Nov 24, 2017