Skip to content

Commit

Permalink
Add m5stack build configs for ota-requestor app (#19702)
Browse files Browse the repository at this point in the history
* Add m5stack build configs for ota-requestor app

* Update build target testdata
  • Loading branch information
tzm41 authored Jun 18, 2022
1 parent b2c0907 commit a7e6476
Show file tree
Hide file tree
Showing 7 changed files with 182 additions and 1 deletion.
65 changes: 65 additions & 0 deletions examples/ota-requestor-app/esp32/sdkconfig_m5stack.defaults
Original file line number Diff line number Diff line change
@@ -0,0 +1,65 @@
#
# Copyright (c) 2022 Project CHIP Authors
# All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Description:
# CI uses this to select the ESP32 M5Stack.
#
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_DEVICE_TYPE_M5STACK=y

# Default to 921600 baud when flashing and monitoring device
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_BAUD=921600
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200

# Enable BT
CONFIG_BT_ENABLED=y
CONFIG_BT_NIMBLE_ENABLED=y

# Enable lwip ipv6 autoconfig
CONFIG_LWIP_IPV6_AUTOCONFIG=y

# Use a custom partition table
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"

# Vendor and product id
CONFIG_DEVICE_VENDOR_ID=0xFFF1
CONFIG_DEVICE_PRODUCT_ID=0x8001

# Main task needs a bit more stack than the default
# default is 3584, bump this up to 5k.
CONFIG_ESP_MAIN_TASK_STACK_SIZE=5120

# Enable debug shell
CONFIG_ENABLE_CHIP_SHELL=y

# Serial Flasher config
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"

# Disable Bluetooth modem sleep
# Enable it may cause GPIO ISR triggers continuously
CONFIG_BTDM_CTRL_MODEM_SLEEP=n
CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG=n
CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=n

# Enable OTA Requestor
CONFIG_ENABLE_OTA_REQUESTOR=y
CONFIG_DEVICE_SOFTWARE_VERSION_NUMBER=2
72 changes: 72 additions & 0 deletions examples/ota-requestor-app/esp32/sdkconfig_m5stack_rpc.defaults
Original file line number Diff line number Diff line change
@@ -0,0 +1,72 @@
#
# Copyright (c) 2022 Project CHIP Authors
# All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Description:
# CI uses this to select the ESP32 M5Stack.
#
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_DEVICE_TYPE_M5STACK=y

# Default to 921600 baud when flashing and monitoring device
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_BAUD=921600
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200

# Enable BT
CONFIG_BT_ENABLED=y
CONFIG_BT_NIMBLE_ENABLED=y

# Enable lwip ipv6 autoconfig
CONFIG_LWIP_IPV6_AUTOCONFIG=y

# Use a custom partition table
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"

# Vendor and product id
CONFIG_DEVICE_VENDOR_ID=0xFFF1
CONFIG_DEVICE_PRODUCT_ID=0x8001

# Main task needs a bit more stack than the default
# default is 3584, bump this up to 5k.
CONFIG_ESP_MAIN_TASK_STACK_SIZE=5120

# Disable shell
CONFIG_ENABLE_CHIP_SHELL=n

# Serial Flasher config
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"

# Disable Bluetooth modem sleep
# Enable it may cause GPIO ISR triggers continuously
CONFIG_BTDM_CTRL_MODEM_SLEEP=n
CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG=n
CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=n

# Enable OTA Requestor
CONFIG_ENABLE_OTA_REQUESTOR=y
CONFIG_DEVICE_SOFTWARE_VERSION_NUMBER=2

# PW RPC Debug channel
CONFIG_EXAMPLE_UART_PORT_NUM=0
CONFIG_EXAMPLE_UART_BAUD_RATE=115200
CONFIG_EXAMPLE_UART_RXD=3
CONFIG_EXAMPLE_UART_TXD=1
CONFIG_ENABLE_PW_RPC=y
4 changes: 4 additions & 0 deletions scripts/build/build/targets.py
Original file line number Diff line number Diff line change
Expand Up @@ -321,6 +321,10 @@ def Esp32Targets():
yield esp32_target.Extend('m5stack-all-clusters-rpc-ipv6only', board=Esp32Board.M5Stack, app=Esp32App.ALL_CLUSTERS,
enable_rpcs=True, enable_ipv4=False)

yield esp32_target.Extend('m5stack-ota-requestor', board=Esp32Board.M5Stack, app=Esp32App.OTA_REQUESTOR)
yield esp32_target.Extend('m5stack-ota-requestor-rpc', board=Esp32Board.M5Stack, app=Esp32App.OTA_REQUESTOR,
enable_rpcs=True)

yield esp32_target.Extend('c3devkit-all-clusters', board=Esp32Board.C3DevKit, app=Esp32App.ALL_CLUSTERS)

yield esp32_target.Extend('m5stack-all-clusters-minimal', board=Esp32Board.M5Stack, app=Esp32App.ALL_CLUSTERS_MINIMAL)
Expand Down
2 changes: 1 addition & 1 deletion scripts/build/builders/esp32.py
Original file line number Diff line number Diff line change
Expand Up @@ -95,7 +95,7 @@ def IsCompatible(self, board: Esp32Board):
if board == Esp32Board.QEMU:
return self == Esp32App.TESTS
elif board == Esp32Board.M5Stack:
return self == Esp32App.ALL_CLUSTERS or self == Esp32App.ALL_CLUSTERS_MINIMAL
return self == Esp32App.ALL_CLUSTERS or self == Esp32App.ALL_CLUSTERS_MINIMAL or self == Esp32App.OTA_REQUESTOR
elif board == Esp32Board.C3DevKit:
return self == Esp32App.ALL_CLUSTERS or self == Esp32App.ALL_CLUSTERS_MINIMAL
else:
Expand Down
2 changes: 2 additions & 0 deletions scripts/build/testdata/all_targets_except_host.txt
Original file line number Diff line number Diff line change
Expand Up @@ -163,6 +163,8 @@ esp32-m5stack-all-clusters-minimal-rpc
esp32-m5stack-all-clusters-minimal-rpc-ipv6only
esp32-m5stack-all-clusters-rpc
esp32-m5stack-all-clusters-rpc-ipv6only
esp32-m5stack-ota-requestor
esp32-m5stack-ota-requestor-rpc
esp32-qemu-tests
imx-all-clusters-app
imx-all-clusters-app-release
Expand Down
36 changes: 36 additions & 0 deletions scripts/build/testdata/build_all_except_host.txt
Original file line number Diff line number Diff line change
Expand Up @@ -774,6 +774,28 @@ bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-all-clusters-rpc-ipv6only/sdkconfig.defaults
idf.py -C examples/all-clusters-app/esp32 -B {out}/esp32-m5stack-all-clusters-rpc-ipv6only reconfigure'

# Generating esp32-m5stack-ota-requestor
mkdir -p {out}/esp32-m5stack-ota-requestor

cp examples/ota-requestor-app/esp32/sdkconfig_m5stack.defaults {out}/esp32-m5stack-ota-requestor/sdkconfig.defaults

rm -f examples/ota-requestor-app/esp32/sdkconfig

bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-ota-requestor/sdkconfig.defaults
idf.py -C examples/ota-requestor-app/esp32 -B {out}/esp32-m5stack-ota-requestor reconfigure'

# Generating esp32-m5stack-ota-requestor-rpc
mkdir -p {out}/esp32-m5stack-ota-requestor-rpc

cp examples/ota-requestor-app/esp32/sdkconfig_m5stack_rpc.defaults {out}/esp32-m5stack-ota-requestor-rpc/sdkconfig.defaults

rm -f examples/ota-requestor-app/esp32/sdkconfig

bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-ota-requestor-rpc/sdkconfig.defaults
idf.py -C examples/ota-requestor-app/esp32 -B {out}/esp32-m5stack-ota-requestor-rpc reconfigure'

# Generating esp32-qemu-tests
mkdir -p {out}/esp32-qemu-tests

Expand Down Expand Up @@ -1913,6 +1935,20 @@ bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-all-clusters-rpc-ipv6only/sdkconfig.defaults
idf.py -C examples/all-clusters-app/esp32 -B {out}/esp32-m5stack-all-clusters-rpc-ipv6only build'

rm -f examples/ota-requestor-app/esp32/sdkconfig

# Building esp32-m5stack-ota-requestor
bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-ota-requestor/sdkconfig.defaults
idf.py -C examples/ota-requestor-app/esp32 -B {out}/esp32-m5stack-ota-requestor build'

rm -f examples/ota-requestor-app/esp32/sdkconfig

# Building esp32-m5stack-ota-requestor-rpc
bash -c 'source $IDF_PATH/export.sh; source scripts/activate.sh;
export SDKCONFIG_DEFAULTS={out}/esp32-m5stack-ota-requestor-rpc/sdkconfig.defaults
idf.py -C examples/ota-requestor-app/esp32 -B {out}/esp32-m5stack-ota-requestor-rpc build'

rm -f src/test_driver/esp32/sdkconfig

# Building esp32-qemu-tests
Expand Down
2 changes: 2 additions & 0 deletions scripts/build/testdata/glob_star_targets_except_host.txt
Original file line number Diff line number Diff line change
Expand Up @@ -57,6 +57,8 @@ esp32-m5stack-all-clusters-minimal-rpc
esp32-m5stack-all-clusters-minimal-rpc-ipv6only
esp32-m5stack-all-clusters-rpc
esp32-m5stack-all-clusters-rpc-ipv6only
esp32-m5stack-ota-requestor
esp32-m5stack-ota-requestor-rpc
esp32-qemu-tests
imx-all-clusters-app
imx-all-clusters-app-release
Expand Down

0 comments on commit a7e6476

Please sign in to comment.