[python] Deprecate chip-device-ctrl step: 1 Add "replhint" for most c…

…ommands (#21845)

docs/guides/python_chip_controller_building.md

@@ -4,6 +4,9 @@ The Python CHIP Controller is a tool that allows to commission a Matter device
 into the network and to communicate with it using the Zigbee Cluster Library
 (ZCL) messages.
 
+> The chip-device-ctrl tool will be deprecated, and will be replaced by
+> chip-repl. Continue reading to see how to do the same thing with chip-repl.
+
 <hr>
 
 -   [Source files](#source)
@@ -192,6 +195,8 @@ set the credentials to the controller by executing the following command:
 chip-device-ctrl > set-pairing-wifi-credential TESTSSID P455W4RD
 ```
 
+**REPL Command**: `devCtrl.SetWiFiCredentials(<ssid>, <password>)`
+
 ### Step 5: Commission the Matter accessory device over Bluetooth LE
 
 The controller uses a 12-bit value called **discriminator** to discern between
@@ -222,6 +227,9 @@ with the following assumptions for the Matter accessory device:
 chip-device-ctrl > connect -ble 3840 20202021 1234
 ```
 
+**REPL Command:**
+`devCtrl.ConnectBLE(<discriminator>, <setup pincode>, <temporary node id>)`
+
 You can skip the last parameter, the Node ID, in the command. If you skip it,
 the controller will assign it randomly. In that case, note down the Node ID,
 because it is required later in the configuration process.
@@ -258,13 +266,19 @@ state:
 chip-device-ctrl > zcl OnOff Toggle 1234 1 0
 ```
 
+**REPL Command:**
+`await devCtrl.SendCommand(1234, 1, Clusters.OnOff.Commands.Toggle())`
+
 To change the brightness of the LED, use the following command, with the level
 value somewhere between 0 and 255.
 
 ```
 chip-device-ctrl > zcl LevelControl MoveToLevel 1234 1 0 level=50
 ```
 
+**REPL Command:**
+`await devCtrl.SendCommand(1234, 1, LevelControl.Commands.MoveToLevel(level=50, transitionTime=Null, optionsMask=0, optionsOverride=0))`
+
 ### Step 7: Read basic information out of the accessory.
 
 Every Matter accessory device supports a Basic Cluster, which maintains
@@ -278,8 +292,13 @@ chip-device-ctrl > zclread Basic ProductName 1234 1 0
 chip-device-ctrl > zclread Basic SoftwareVersion 1234 1 0
 ```
 
+**REPL Command:**
+`await devCtrl.ReadAttribute(1234, [(1, Clusters.Basic.Attributes.VendorName)])`
+
 > Use the `zcl ? Basic` command to list all available commands for Basic
 > Cluster.
+>
+> In REPL, you can type `Clusters.Basic.Attributes.` and then use the TAB key.
 
 <hr>
 
@@ -289,6 +308,8 @@ chip-device-ctrl > zclread Basic SoftwareVersion 1234 1 0
 
 ### `ble-adapter-print`
 
+> BLE adapter operations is not yet supported in REPL
+
 Print the available Bluetooth adapters on device. Takes no arguments:
 
 ```
@@ -298,6 +319,8 @@ chip-device-ctrl > ble-adapter-print
 
 ### `ble-debug-log`
 
+> BLE adapter operations is not yet supported in REPL
+
 Enable the Bluetooth LE debug logs.
 
 ```
@@ -306,6 +329,8 @@ chip-device-ctrl > ble-debug-log 1
 
 ### `ble-scan [-t <timeout>] [identifier]`
 
+> BLE adapter operations is not yet supported in REPL
+
 Start a scan action to search for valid CHIP devices over Bluetooth LE (for at
 most _timeout_ seconds). Stop when the device is matching the identifier or the
 counter times out.
@@ -336,6 +361,9 @@ device commissioning procedure to configure the device with a Thread interface.
 chip-device-ctrl > set-pairing-thread-credential 0e080000000000010000000300001335060004001fffe002084fe76e9a8b5edaf50708fde46f999f0698e20510d47f5027a414ffeebaefa92285cc84fa030f4f70656e5468726561642d653439630102e49c0410b92f8c7fbb4f9f3e08492ee3915fbd2f0c0402a0fff8
 ```
 
+**REPL Commands:**
+`devCtrl.SetThreadOperationalDataset(bytes.FromHex("0e080000000000010000000300001335060004001fffe002084fe76e9a8b5edaf50708fde46f999f0698e20510d47f5027a414ffeebaefa92285cc84fa030f4f70656e5468726561642d653439630102e49c0410b92f8c7fbb4f9f3e08492ee3915fbd2f0c0402a0fff8"))`
+
 ### `set-pairing-wifi-credential <ssid> <credentials>`
 
 Provides the controller with Wi-Fi network credentials that will be used in the
@@ -345,6 +373,8 @@ device commissioning procedure to configure the device with a Wi-Fi interface.
 chip-device-ctrl > set-pairing-wifi-credential TESTSSID P455W4RD
 ```
 
+**REPL Commands:** `devCtrl.SetWiFiCredentials('TESTSSID', 'P455W4RD')`
+
 ### `connect -ip <address> <SetUpPinCode> [<nodeid>]`
 
 Do key exchange and establish a secure session between controller and device
@@ -356,6 +386,9 @@ persisted by controller / device.
 
 If no nodeid given, a random Node ID will be used.
 
+**REPL Commands:**
+`devCtrl.CommissionIP(b'<ip address>', <setup pin code>, <nodeid>)`
+
 ### `connect -ble <discriminator> <SetUpPinCode> [<nodeid>]`
 
 Do key exchange and establish a secure session between controller and device
@@ -367,13 +400,20 @@ persisted by controller / device.
 
 If no nodeid given, a random Node ID will be used.
 
+**REPL Commands:**
+`devCtrl.ConnectBLE(<discriminator>, <setup pin code>, <nodeid>)`
+
 ### `close-session <nodeid>`
 
 If case there exists an open session (PASE or CASE) to the device with a given
 Node ID, mark it as expired.
 
+**REPL Commands:** `devCtrl.CloseSession(<nodeid>)`
+
 ### `discover`
 
+> To be implemented in REPL
+
 Discover available Matter accessory devices:
 
 ```
@@ -382,6 +422,8 @@ chip-device-ctrl > discover -all
 
 ### `resolve <node_id>`
 
+> To be implemented in REPL
+
 Resolve DNS-SD name corresponding with the given Node ID and update address of
 the node in the device controller:
 
@@ -391,6 +433,8 @@ chip-device-ctrl > resolve 1234
 
 ### `setup-payload generate [-v <Vendor ID>] [-p <Product ID>] [-cf <Custom Flow>] [-dc <Discovery Capabilities>] [-dv <Discriminator Value>] [-ps <Passcode>]`
 
+> To be implemented in REPL
+
 Print the generated Onboarding Payload Contents in human-readable (Manual
 Pairing Code) and machine-readable (QR Code) format:
 
@@ -402,6 +446,8 @@ SetupQRCode: [MT:YNJV7VSC00CMVH7SR00]
 
 ### `setup-payload parse-manual <manual-pairing-code>`
 
+> To be implemented in REPL
+
 Print the commissioning information encoded in the Manual Pairing Code:
 
 ```
@@ -417,6 +463,8 @@ SetUpPINCode: 20202021
 
 ### `setup-payload parse-qr <qr-code>`
 
+> To be implemented in REPL
+
 Print the commissioning information encoded in the QR Code payload:
 
 ```
@@ -451,6 +499,14 @@ example, `networkId=hex:0123456789abcdef` (for
 
 For boolean type, use `key=True` or `key=False`.
 
+**REPL Commands:**
+
+```python
+# await devCtrl.SendCommand(<nodeid>, <endpoint>, Clusters.<cluster>.Commands.<command>(<arguments>))
+# e.g.
+await devCtrl.SendCommand(12344321, 1, Clusters.LevelControl.Commands.MoveWithOnOff(moveMode=1, rate=2, optionsMask=0, optionsOverride=0))
+```
+
 ### `zcl ?`
 
 List available clusters:
@@ -499,6 +555,10 @@ WakeOnLan
 WindowCovering
 ```
 
+**REPL Commands**
+
+Type `Clusters.` and hit TAB
+
 ### `zcl ? <Cluster>`
 
 List available commands in cluster. For example, for _Basic_ cluster:
@@ -525,6 +585,10 @@ LocalConfigDisabled
 ClusterRevision
 ```
 
+**REPL Commands**
+
+Type `Clusters.(cluster name).Commands.` and hit TAB
+
 ### `zclread <Cluster> <Attribute> <NodeId> <EndpointId> <GroupId> [arguments]`
 
 Read the value of ZCL attribute. For example:
@@ -533,6 +597,14 @@ Read the value of ZCL attribute. For example:
 chip-device-ctrl > zclread Basic VendorName 1234 1 0
 ```
 
+**REPL Commands**
+
+```python
+# devCtrl.ReadAttribute(<nodeid>, [(<endpoint id>, Clusters.<cluster>.Attributes.<attribute>)])
+# e.g.
+await devCtrl.ReadAttribute(1234, [(1, Clusters.Basic.Attributes.VendorName)])
+```
+
 ### `zclwrite <cluster> <attribute> <nodeid> <endpoint> <groupid> <value>`
 
 Write the value to a ZCL attribute. For example:
@@ -547,6 +619,17 @@ chip-device-ctrl > zclwrite TestCluster CharString 1 1 0 233233
 Note: The format of the value is the same as the format of argument values for
 ZCL cluster commands.
 
+**REPL Commands**
+
+```python
+# devCtrl.WriteAttribute(<nodeid>, [(<endpointid>, Clusters.<cluster>.Attributes.<attribute>(value=<attribute value>))])
+# e.g.
+await devCtrl.WriteAttribute(1, [(1, Clusters.TestCluster.Attributes.Int8u(value=1))])
+await devCtrl.WriteAttribute(1, [(1, Clusters.TestCluster.Attributes.Boolean(value=True))])
+await devCtrl.WriteAttribute(1, [(1, Clusters.TestCluster.Attributes.OctetString(value=b'123123\x00'))])
+await devCtrl.WriteAttribute(1, [(1, Clusters.TestCluster.Attributes.CharString(value='233233'))])
+```
+
 ### `zclsubscribe <Cluster> <Attribute> <Nodeid> <Endpoint> <MinInterval> <MaxInterval>`
 
 Configure ZCL attribute reporting settings. For example:
@@ -555,6 +638,14 @@ Configure ZCL attribute reporting settings. For example:
 chip-device-ctrl > zclsubscribe OccupancySensing Occupancy 1234 1 10 20
 ```
 
+**REPL Commands**
+
+```python
+# devCtrl.ReadAttribute(<nodeid>, [(<endpoint>, Clusters.<cluster>.Attributes.<attribute>)], reportInterval=(<min interval>, <max interval>))
+# e.g.
+await devCtrl.ReadAttribute(1, [(1, Clusters.OccupancySensing.Attributes.Occupancy)], reportInterval=(10, 20))
+```
+
 ### `zclsubscribe -shutdown <subscription id>`
 
 Shutdown an existing attribute subscription.
@@ -583,3 +674,12 @@ chip-device-ctrl > zclsubscribe OnOff OnOff 1 1 10 20
 ```
 
 The subscription id is `0xdeadbeefcafe` in this case
+
+**REPL Commands**
+
+```python
+# SubscriptionTransaction.Shutdown()
+# e.g.
+sub = await devCtrl.ReadAttribute(1, [(1, Clusters.OccupancySensing.Attributes.Occupancy)], reportInterval=(10, 20))
+sub.Shutdown()
+```